Screen Resolution while calling a screen

Dear SAP Gurus,
I am calling a screen and i need that screen with 1240*780 resolution.
Is it possible to do that ..if we can ..then please do let me know....
Thanks and Regards,
Dinakaran

I don't think that you can control the resolution for specific screens. You can set the resolution on the gui, but this is a global setting. I don't think that you can handle this with ABAP code.
Regards,
Rich Heilman

Similar Messages

Screen blank while calling

I purchased nokia Lumia 520, 2 weeks back. Now when I make a call, the screen cannot be viewed,otherwise it is ok in all respect. I cannot see the call duration and cannot disconnect the call.
Someone please tell me where to do the setting??
rakesh

hi, have you checked that you don't have anything like a screen protector blocking the proximity sensor, and also that you are up to date with the latest firmware for your device, and also that you are up to date with the latest Nokia system app updates from the Store? also try performing a soft reset.

Change Screen Resolution or not Change Screen Resolution?

I mean is it possible to change screen resolution with Java?
I read some topics (not in this forum) that is impossible. I know there is a method to set at full screen a frame with the favourite resolution but does it effectively exist a method to set the screen with a favourite resolution?
For example:
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setUndecorated(true);
        frame.setIgnoreRepaint(true);
        device.setFullScreenWindow(frame);
        if (displayMode != null && device.isDisplayChangeSupported()) {
            try {
                device.setDisplayMode(displayMode);
            } catch (IllegalArgumentException iae) {
                System.err.println("EX: " + iae);
        ...the device.setDisplayMode(displayMode) always throw me an exception: Invalid Display Mode (or something like that) with all permitted display modes (640by480, 800by600, 1024by768, etc...), with all permitted refresh rates, with all permitted color depths.
Illuminate me please!
Thanx in advance!

Hi,
I think i you should check this link
http://forum.java.sun.com/thread.jspa?threadID=624649&messageID=3554316
with help of above link you solve your problem of screen resolution
but problem with above code is when you apply on frame that's ok but is you add any JDialog to that frame then JDialog and move JDialog with mouse dragged and dropped
then dialog is invisibly run .
you check this i you find any solution please post that it's urgent

Screen resolution on second 20" screen not possible with 1680 x 1050 ?

Hi,
I´ve got two Dell 20" widescreen monitors connected to a G5 with Dual DVI out. First monitor with DVI connected works fine with the 1680 x 1050 resolution, but the second monitor (connected via vga) can´t be set to the same necessary resolution. The monitor control panel does not offer this resolution when using vga. Does anyone know how to get this resolution with vga connector on the second screen ? (I know I had this resolution one day with tricking around with cables and switching).
Best,
Martin

As far as I know, that resolution isn't available through VGA. I thought you said your machine has dual DVI out... Does your second monitor not have a DVI input? If it does, why aren't you using it?

Using Mini DisplayPort to VGA, screen resolution distorts. How do I fix?

When I use my Mini DisplayPort to VGA adapter, the resolution gets too big for my screen (mbpro 15") and the same thing appears on the projector I use. I'm not sure if I should change my screen resolution while I use the projector or what?
Also, the first (and only) time I used it, it seemed as if the signal wouldn't even send. After a while of fiddling around, the screen finally showed up on the projector (distorted) but we didn't do anything different to change that. It just kind of did it on it's own. Is this common for "first uses" or will this happen every time?
I plan on using this again Friday.

Welcome! If you have mini displayport, you should try the appropriate discussion group for your newer machine:
http://discussions.apple.com/category.jspa?categoryID=251
Although some things are very similar to the original Macbook Pro, many are not.

Screen resolution in remote connection

Hello.
I have several macs, both at home and at the office.
I like to use my MacBook Air on the go.
When at the office, I like to work from a mac mini with a full HD screen resolution.
The MacBook Air support this external screen.
In order to avoid connecting and deconnecting the screen all the time,
I would like to connect to the MacBook Air from the mac Mini,
and enjoy the full HD screen resolution, while working remotely on the MB Air.
Unfortunately, I only can access the native MB Air resolution of 1440*900.
Is there any way to solve this ?
Thanks for your support,
V.

Hi,
Currently you cannot change the resolution from within the session. This is normal and expected behavior.
Unfortunately this means you need to set the desired resolution before connecting by using custom .rdp files, manually within the Remote Desktop Client, custom web launch page, custom windows launch program, etc.
-TP

Flash business presentation- Screen resolution help.....

Here's the deal. I'm creating a presentation on my laptop
which has a 1440x900 resolution. Now, once it's hooked up to the
projector, the projector automatically changes my screen res to
1024x768, which completely distorts everything and it gets blurry
and not visually appealing.
What I'd like to do is to figure out a way around this. Like
maybe some way to reduce my screen res to 1024x768, but maintain
proportions with black borders like on a DVD that's been formatted
to fit your screen. Something like that. Can anybody think of
anything?
Thanks in advance.

Flash can read the screen resolution by calling to:
System.capabilities.screenResolutionX //(and/or Y)
but it will not read the size of the browser window itself.
You may want to consider using a standard proportion and setting
the swf to scale accordingly.

Video problems, no ttys, screen resolution changes

Recently I have updated the nvidia drivers and others packages. Now, when the window manager (openbox) starts there is a horizontal line in the screen.
If I press Ctrl+Alt+Fn no tty is shown.
If I logout, the screen resolution at the login screen (Im using SLim) is below the normal and the screen looks shifted to the right, if I login the screen size is smaller and the top of the screen is reflected in the bottom, and sometimes after logout I dont get the Slim screen but the login prompt.
The nvidia driver version is 304.84-1.
My dmesg show this:
[ 17.084546] NVRM: Your system is not currently configured to drive a VGA console
[ 17.084553] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 17.084556] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 17.084559] NVRM: drivers including, but not limited to, vesafb, may result in
[ 17.084561] NVRM: corruption and stability problems, and is not supported.

Hi Gery
Thanks for the useful information.
I have noticed a similar issue with Vista running on my non-Toshiba notebook The graphic driver update helps definitely.
Best regards

BDC screen resolution

How to do screen resolution in BDC table control ?

so there so many threads for screen resolution check it
how to solve screen resolution in bdc
Screen Resolution in Bdc
How to make screen resolution independent in BDC
Re: Screen Resolution problem in BDC
screen resolution problem in table control
whats the screen resolution problem with bdc's how to solve it?
Screen Resolution Problem in Session Method

Optimal screen resolution for Windows XP

I'm using Windows XP at times, and it was installed for me when I purchased the computer via MacMall. The screen resolution is sat at screen: 1440 x 900 Color 32 BPP. Is this the desirable setting? I have not change it, as I'm wary to experiment too much with Windows XP on the Mac.

If you're using an LCD, the optimal resolution is what ever the native (usually advertised) resolution is of the LCD. Anything lower and things may be blurry. It cannot go higher.

Boot screen resolution does not match the login screen on retina

Boot screen resolution does not match the login screen on MBP retinas if you've set your resolution to hi-res thus resulting a flickering at login screen appearing instead of that nice login screen animation, due to I believe screen resolution change...
is there a way to change boot screen resolution (times before login screen)???
Or do we have to wait for apple to push an EFI update for this problem?
Thanks in advance

No one having this issue?
please some one at least confirm this so I know thats not my setup spesific problem?

Calling a Screen as a Modal Dialog

Hi
I have created a 'Z' Transaction which has only one Screen which is of type 'Modal Dialog'. Whenever i run the Z Transaction, i get the screen in a full window size. Is there any way by which i can restrict this screen to a Modal Dialog. I know that we can use call Screen XX Starting at .. Ending at.. Option. But this will help me only when i have two screens.
Can anyone answer this as it is urgent !!!
Rgrds,
Murli.

Here is an example of what I'm talking about. Here we have a small program with a selection screen. When you hit enter, it will call the function module which has the CALL SCREEN...Starting...Ending statement. This will thru the dialog box in front of the selection-screen. I believe that this is the functionality that you required.
The program code......
report zrich_0003.
data: br_itab type table of zbrbin with header line.
parameters: p_check.
at selection-screen.
call function 'Z_BIN_LOC'
       tables
            br_itab = br_itab.
The function module....
FUNCTION Z_BIN_LOC.
*"*"Local interface:
*" TABLES
*"      BR_ITAB STRUCTURE ZBRBIN
CLEAR: ITAB. REFRESH: ITAB.
CLEAR: OK_CODE, SAVE_OK.
*Loop thru parameter table and fill up screen.
LOOP AT BR_ITAB.
* Entry already exists........get bin location.
    SELECT SINGLE * FROM ZBRBIN
         WHERE VBELN = BR_ITAB-VBELN.
    IF SY-SUBRC <> 0.
      CLEAR ZBRBIN-BIN.
    ENDIF.
    ITAB-KDAUF = BR_ITAB-VBELN.
    ITAB-BIN = ZBRBIN-BIN.
    APPEND ITAB.
ENDLOOP.
REFRESH CONTROL 'ITABCON' FROM SCREEN '0100'.
* call entry screen.
CALL SCREEN 100 STARTING AT 10 5
                  ENDING AT 85 16.
ENDFUNCTION.
Regards,
Rich Heilman

[SOLVED]Screen resolution began to be incorrectly detected

After installing some packages not having obvious relations to video issues (mysql and zfs related packages), the screen resolution on my 1280x1024 screen began to be set as 1024x768 without 1280x1024 in the list of possible modes. I tried to X -configure but to no avail. Reinstalling xorg-server also didn't help. I tried to manually detect and add 1280x1024 mode with xrandr, this mode began to appear in the modes list, but the resolution remains 1024x768 when it's selected.
I have an ancient SiS videocard, but it worked OK with the standard vesa driver.
What can be the cause of this issue and how it could be corrected?
Some fragments of Xorg log:
[ 769.623] (II) VESA(0): Total Memory: 512 64KB banks (32768kB)
[ 769.623] (II) VESA(0): Monitor0: Using default hsync range of 31.50-48.00 kHz
[ 769.623] (II) VESA(0): Monitor0: Using default vrefresh range of 50.00-70.00 Hz
[ 769.623] (II) VESA(0): Monitor0: Using default maximum pixel clock of 65.00 MHz
[ 769.623] (WW) VESA(0): Unable to estimate virtual size
[ 769.623] (II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name)
[ 769.623] (II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name)
[ 769.623] (II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
[ 769.623] (II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
[ 769.623] (II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
[ 769.623] (WW) VESA(0): No valid modes left. Trying less strict filter...
[ 769.623] (II) VESA(0): Monitor0: Using hsync range of 31.50-48.00 kHz
[ 769.623] (II) VESA(0): Monitor0: Using vrefresh range of 50.00-70.00 Hz
[ 769.623] (II) VESA(0): Monitor0: Using maximum pixel clock of 65.00 MHz
[ 769.623] (WW) VESA(0): Unable to estimate virtual size
[ 769.623] (II) VESA(0): Not using built-in mode "1600x1200" (hsync out of range)
[ 769.623] (II) VESA(0): Not using built-in mode "1280x1024" (hsync out of range)
[ 769.623] (--) VESA(0): Virtual size is 1024x768 (pitch 1024)
[ 769.623] (**) VESA(0): *Built-in mode "1024x768"
[ 769.623] (**) VESA(0): *Built-in mode "800x600"
[ 769.623] (**) VESA(0): *Built-in mode "640x480"
[ 769.623] (==) VESA(0): DPI set to (96, 96)
[ 769.623] (II) VESA(0): Attempting to use 60Hz refresh for mode "1024x768" (118)
[ 769.624] (II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115)
[ 769.624] (II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
// Another fragment:
[ 769.384] (II) LoadModule: "glx"
[ 769.384] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 769.392] (II) Module glx: vendor="X.Org Foundation"
[ 769.392] compiled for 1.16.0, module version = 1.0.0
[ 769.392] ABI class: X.Org Server Extension, version 8.0
[ 769.392] (==) AIGLX enabled
[ 769.392] (II) LoadModule: "vesa"
[ 769.393] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 769.395] (II) Module vesa: vendor="X.Org Foundation"
[ 769.395] compiled for 1.16.0, module version = 2.3.2
[ 769.395] Module class: X.Org Video Driver
[ 769.395] ABI class: X.Org Video Driver, version 18.0
[ 769.395] (II) VESA: driver for VESA chipsets: vesa
[ 769.395] (++) using VT number 1
[ 769.395] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 769.395] (II) Loading sub module "vbe"
[ 769.395] (II) LoadModule: "vbe"
[ 769.396] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 769.396] (II) Module vbe: vendor="X.Org Foundation"
[ 769.396] compiled for 1.16.0, module version = 1.1.0
[ 769.396] ABI class: X.Org Video Driver, version 18.0
[ 769.396] (II) Loading sub module "int10"
[ 769.396] (II) LoadModule: "int10"
[ 769.398] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 769.399] (II) Module int10: vendor="X.Org Foundation"
[ 769.399] compiled for 1.16.0, module version = 1.0.0
[ 769.399] ABI class: X.Org Video Driver, version 18.0
[ 769.399] (II) VESA(0): initializing int10
[ 769.421] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 769.424] (II) VESA(0): VESA BIOS detected
[ 769.424] (II) VESA(0): VESA VBE Version 3.0
[ 769.424] (II) VESA(0): VESA VBE Total Mem: 32768 kB
[ 769.424] (II) VESA(0): VESA VBE OEM: SiS
[ 769.424] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[ 769.424] (II) VESA(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
[ 769.424] (II) VESA(0): VESA VBE OEM Product: 6330
[ 769.424] (II) VESA(0): VESA VBE OEM Product Rev: 3.72.10
[ 769.448] (==) VESA(0): Depth 24, (--) framebuffer bpp 32
[ 769.448] (==) VESA(0): RGB weight 888
[ 769.448] (==) VESA(0): Default visual is TrueColor
[ 769.448] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 769.448] (II) Loading sub module "ddc"
[ 769.448] (II) LoadModule: "ddc"
[ 769.448] (II) Module "ddc" already built-in
[ 769.533] (II) VESA(0): VESA VBE DDC supported
[ 769.533] (II) VESA(0): VESA VBE DDC Level none
[ 769.533] (II) VESA(0): VESA VBE DDC transfer in appr. 0 sec.
[ 769.576] (II) VESA(0): VESA VBE DDC read failed
[ 769.576] (II) VESA(0): Searching for matching VESA mode(s):
Last edited by nbd (2014-08-05 09:17:50)

I tried the 'xf86-video-sis' from the official repositories, but it didn't work: 'X -configure' outputs that no devices are found.
The command
# lspci | grep SiS
gives the output:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 662 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] LPC Controller (rev 36)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller (rev 01)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA (rev 01)
00:1f.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter (rev 04)
The command 'X -configure' with the 'xf86-video-vesa' driver produces the following xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
The X server is started via startxfce4 in the ~/.xinitrc file:
#!/bin/sh
# ~/.xinitrc
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
exec startxfce4
I tried to use the recommendations about using xrandr. The command
# cvt 1280 1024
produces the following:
# 1280x1024 59.89 Hz (CVT 1.31M4) hsync: 63.67 kHz; pclk: 109.00 MHz
Modeline "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync
Then I perfrom the following two commands:
# xrandr --newmode "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync
# xrandr --addmode default "1280x1024_60.00"
This adds the 1280x1024 mode to the list of available modes in the display control panel, but when
this mode is selected - nothing happens and the resolution remains the same: 1024x768.
EDIT:
I tried all three SiS drivers from the repository: sis, sisusb and sisimedia. In all three cases 'X -configure' failed with an error message: "No devices to configure". The strange thing is that the vesa driver worked OK out of the box. What could cause such a strange problem with the screen resolution?
EDIT 2:
The cause of the problem was the cable from the monitor to the computer: it was twisted and apparently was causing some aberrations to the signal. I found out it when added to the xorg.conf file the line HorizSync = 58-61. After adding that line the problem disappeared. I began to think why the things previously have been working OK without that line. And supposed that the matter is in hardware. I straighted out the cable and the problem isn't occuring anymore even without the xorg.conf editings.
Last edited by nbd (2014-08-04 17:58:13)

Selection-screen: how to call based on a condition...

Hello experts,
can I do this:
if flag has value, call selection-screen 1 else call selection-screen 2.
Thanks guys!

Hi Viraylab,
Yes u can call the selection-screen based on some condition.
In this sample of code, if first radio button is chosen then it will call selection-screen 500 and if the second radio button is chosen then it will call selection-screen 1500.
TABLES : ZOBRENT.
SELECTION-SCREEN BEGIN OF BLOCK sel1 WITH FRAME TITLE tit1.
PARAMETERS: R1 RADIOBUTTON GROUP RAD1,
            R2 RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN END OF BLOCK sel1.
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK sel2 WITH FRAME TITLE tit2.
PARAMETERS: panid like zobrent-zopanid.
SELECTION-SCREEN END OF BLOCK sel2.
SELECTION-SCREEN END OF SCREEN 500.
SELECTION-SCREEN BEGIN OF SCREEN 1500 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK sel3 WITH FRAME TITLE tit3.
PARAMETERS: brent LIKE zobrent-zo_brent,
            effdat LIKE zobrent-zo_effdat.
SELECTION-SCREEN END OF BLOCK sel3.
SELECTION-SCREEN END OF SCREEN 1500.
INITIALIZATION.
tit1 = 'Values'.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD1.
IF R1 = 'X'.
    CALL SELECTION-SCREEN 500.
ELSEIF R2 = 'X'.
   CALL SELECTION-SCREEN 1500.
ENDIF.
START-OF-SELECTION.
tit1 = 'Values'.
tit2 = 'PANID'.
tit3 = 'BRENT'.
If found helpful, please do reward.

Small person's picture while calling. How can I make it full screen?

Small person's picture while calling. How can I make it full screen?

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

Screen Resolution while calling a screen

Similar Messages

Maybe you are looking for