Screen too large for area. whatto do?

Unable to make calls, see phone numbers, if inadvertently connect, cannot disconnect calls. Not liking iPhone right now

This is covered in the manual ( zoom) and answered on these forums often ( the forum search bar is on the right side of this page).
Double tap with three fingers
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Similar Messages

Screen too large for internal buffer

Hi,
2 days ago I have an issue when I execute "crontab -e" with my terminal maximized. The error say "Screen too large for internal buffer" and the term crash. But when the term isn't maximized the command works fine. I tried with teminal (XFCE), Konsole, rxvt... My screen resolution is 1680x1050. With visudo command I have the same issue.
¿Anybody have this problem too?
Many thanks
Last edited by figue (2009-08-01 10:38:09)

It's VISUAL variable... I had EDITOR set to vim some time ago.
export VISUAL=vim
Thank you again

Mac Mini display is too large for screen on only one user account

Okay, so I left my two year olds alone for a minute playing the "alphabet game" on my Mac Mini. They only had the keyboard, no mouse but managed to muck up my display leaving me a bit frustrated. The screen is now too large for my Samsung display. The only way to see everything (dock, top bar, etc) is to move my mouse arrow to the end of my display and see it roll back onto the page. I've checked the settings there and they are fine. The MacBook Pro plugs right in and is proper resolution. So I then wondered if another account on the Mac Mini would do the same thing. I logged out of my Admin account and into another and everything looks just dandy. I log back into my Admin account and it's too large and blurry again. The resolution is set correct at 1920x1080 at 60 Hz.
What button did they push on my keyboard that would do this and how do I get it back?? Aargh! Thanks all!

Ha, figured it out myself from another discussion forum finally. Thoght I'd share in case anyone else runs into this. They must have hit "Zoom" by htting the "Control" and scroll buttons at the same time..
Resolution:
You can zoom out by holding down the Option and Command buttons on the keyboard and, while you hold them down, pressing the - key.

OS10.3.1 a disaster! Among other things, the dsplay is too large for screen

I do not like OS 10.3 ! After my Z10 was updated to 10.3.1.1779 about a month ago, I access it because the password entry keyboard displayed for about 1/10 sec leaving a black screen.
After a device reset the device the keyboard remained visible but did not respond to touches (actually it did respond randomly to some). Finally another reset gave me a usable keyboard.
But the device always opens with an icon display about 20% too large for my screen and requires several shrink attempts before the proper size displays. Each attempt simply bounces back to the oversize state.
Unfortunately, this also happens with every app (including "Settings") opened. Yesterday, I couldn't return to the main of Settings because the sub-page wouldn't shrink to expose the "<' button - a close and re-open was the only way to get back to the main page.
Other points I hate about the OS: I've noticed my active wallpaper (not custom but from 10.2) is not listed in the the new 10.3 wallpaper list and since I don't know where its stored I can't try one of the newer ones without giving up on the present wallpaper.
The date displayed on the home screen is too faint to be read with my wallpaper. I know there are some people who think black on black is cool; they obviously have great eyesight. The new 10.3 compass is now totally useless and the new clock is not much better but is at least still usable by a change to a digital display.
I recently tried to check the time on a sunny afternoon and gave up because I couldn't make out the white lines on the black background. I find the stupidity of black on black unfathomable and in over 40 years of software development I have never seen something as wasteful of engineering time as products with poor user interfaces (i.e. black on black). Why can't these apps offer the user the ability to change the colour?
The calculator has also regressed. Again all black (cool!), though that's not the issue here. For the longest time I thought it no longer supported scientific operations until I accidentally got a lucky swipe to bring it into view.
However, the requirement of a half-dozen swipe attempts for each display change reduces this app to a space waster or only to be only useful for simple operations and units conversion. I'm going to try a reload of the OS but unfortunately that won't improve the apps.
Is this standard procedure that Blackberry destroys all (blackberry) apps of the previous version with new ones at each update and offers no way to get back or protect against such changes?

Hi All,
I have already checked below configuration T-Code Value :
T-Code : OBA0 :
Tolerance for Groups of G/L Accounts in Local Curre :
Debit posting : 0 TWD, Percentage 0 %
Credit posting : 0 TWD, Percentage 0 %
T-Code : OBA4 :
Upper limits for posting procedures :
Amount per document : 9,999,999,999,999
Amount per open item account item : 999,999,999,999
cash discount per line item : 1%
Permitted payment differences :
Revenue : Amount 100, Percent 1%, Cash discnt adj. to : 100
Expense : Amount 100, Percent 1%, Cash discnt adj. to : 100
I don't understand when AR open item amount is USD 100.3, and incoming payment 101.12, The system can auto clearing by current configuration, but change the AR open item amount to USD 0.3 and change incoming payment amount to 1.12, The system alert error message "The difference is too large for clearing". The same system configuration and the same "Not assigned" value in choosing open item screen, but produce different results!
How should i change the configuration?
Best regards,
Eric
Edited by: Eric Yang on Sep 12, 2008 2:12 AM

PSE Workspace too large for screen

I'm using PSE v.11 with OSX on an iMac.
The PSE workspace is too large for the screen e.g. the five icons to the left of "Add Event" on the lower control bar are not visible.
Have noted previous discussions have mentioned a "green button" - what's that ?
Help appreciated.

But I'd try going to system prefs>displays and changing your resolution a few times till it snaps into place. You aren't running this on a first generation macbook air, are you?

PSE 6 slide show photos too large for TV screen

I have been collecting, scanning and saving family photos for over a year to create a slide show for my 81 yr. old Dad. I create a slide show with PSE 6, save to a CD and play on the TV. No matter what pixel size I resize the photos to they are still too large for the TV screen - not just one TV screen but different ones I try. I loose heads at the top, feet at the bottom, people on the sides. I have been researching but have not found the answer to solve my problem. Anyone have the answer or some suggestions I would be very appreciative. Thanks.
Scrap Grannie

Well, first of all, choose the right resolution and frame-rate...
Are you working in NTSC (30 fps), or PAL (25 fps)...?
Use one of the common DV formats /
if you choose HD, 1080i, then your TV must be able to recognize that format,
otherwise images get cut off...
Format Rectangular Size Square Size
DV NTSC................................................720x480.............................. ...720x540
DV PAL...................................................720x576............................ .....768x576
HDV 720p..................................................NA................................. ....1280x720
HDV 1080i.................................................NA................................. ....1920x1080
Stay with your chosen format through-out your whole project...
(PNG, TIFF or PSD), import those files into your video editor.
Depending on the Operational System (Mac or Windows), one has many choices...
http://en.wikipedia.org/wiki/List_of_video_editing_software
After editing, import those files into your chosen Authoring software for burning,
they will take care of the appropriate compression.
(I would recommend burning to DVD, not CD, one will achieve much better quality...
Regards
Nolan

How do I resize Photoshop - it's too large for my Macbook Pro screen and I can't get to the resize corners?

Photoshop is too large for my Macbook Pro screen. I cannot access the resize handles - they're off the screen and I can't drag it. Any solution?

Do you see the red, yellow, and red window buttons? If so click on the green one.
If you don't see them then you are possibly in full screen mode, and pressing the "F" key once or twice allow you to get back to normal mode.

My time Machine keeps saying, "Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 345.74 GB but only 289.80 are available." I have already excluded files. I have a 1tb external drive. HELP!!!

For over two weeks now I have been frustated and not having my TIme Machine back up to my 1tb external drive. I dont understand why now its a problem. It keeps saying
"This backup is too large for the backup disk. The backup requires 345.74GB but only 289.80GB are avialable. Time Machine needs work space on the bakup disk, in addition to the space required to store backups. Open Time Machine preferences to select a large backup disk or make the bakup smaller by excluding files." So I have already excluded almost all of my files, and even deleted the backup disk yet, that quote still keeps popping up. I am truly at a wall with this. I have a Mac OS X version 10.7.5. CAN SOMEONE HELP ME PLEASE????

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

HT1338 Since having my Macbook Pro attached to a large display screen, everything is too large for the screen. Is there a cure please?

Today I had my Mac linked to a projector screen, and since disconnection evrything from the desk top onwards has been too large for the screen. Before that evrything was perfect. I have tried zoom buttons etc, but nothing seems to work. Any help gratefully rceived.

So it's not the Zoom feature? Open System Preferences Universal Access pane Seeing tab. Make sure Zoom is turned OFF.
If it's not that, then you may have the resolution set so that it is not optimal for the built-in display. Open System Preferences Displays pane Display tab. The optimal resolution is usually the one at the top of the list of choices.

I updated to iTunes 11 on my Windows PC. Since the update, when I open iTunes its window is too large for my screen. Resizing is a pain, because I have to change my screen resolution. And when I restart iTunes,it has reverted back to being too large.Help!

I recently updated to iTunes 11 on my Windows PC. Since the update, each time I open iTunes its window is too large for my screen. Resizing it is a pain, because I have to change my screen resolution. And then when I restart iTunes, it has reverted back to being too large. Please help!

Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it. It will now fit the screen. Trouble is, after you close it, you'll have to do it again when you re-start itunes. The good news is it takes all of about 2 seconds. Apple should fix this. Should.

HELP! Display appears too large for screen!

Weird thing happening... The display on my iPhone for some reason is appearing too large for the screen, as if I zoomed in on the display slightly. I can't figure out a way to fix this.
Here's what it looks like. Notice the bottom half of the "scroll to unlock" is cut off... the whole thing is off-centered bcause of the zoom) http://i37.tinypic.com/25qvpr4.jpg
I updated to the latest software/etc... because I figured that that might resolve the issue. Restarted the phone. Can't fix. Trying to avoid my local Apple store, since it's an absolute mob scene. Any advice?
Message was edited by: cohanj087

You have zoom on, probably.
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
The manual will tell you how to turn it off.
Page 190:
"Turn Zoom on or off: In Settings, choose General > Accessibility > Zoom and tap the
Zoom On/Off switch.
Note: You cannot use VoiceOver and Zoom at the same time.
Zoom in or out: Double-tap the screen with three fingers. By default, the screen is
magnified by 200 percent. If you manually change the magnification (by using the tap-
and-drag gesture, described below), iPhone automatically returns to that magnification
when you zoom in by double-tapping with three fingers.
Increase magnification: With three fingers, tap and drag toward the top of the
screen (to increase magnification) or toward the bottom of the screen (to decrease
magnification). The tap-and-drag gesture is similar to a double-tap, except you don’t
lift your fingers on the second tap—instead, drag your fingers on the screen. Once you
start dragging, you can drag with a single finger.
Move around the screen: When zoomed in, drag or flick the screen with three fingers.
Once you start dragging, you can drag with a single finger so that you can see more
of the screen. Hold a single finger near the edge of the display to pan to that side of
the screen image. Move your finger closer to the edge to pan more quickly. When you
open a new screen, Zoom always goes to the top-middle of the screen.
"

The message I get is: Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 111.27 GB but only 42.1 GB are available.

I have a problem with my Time Capsule. The message I get is: Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 111.27 GB but only 42.1 GB are available. As a result, my backups are no longer running. My umderstanding was that the Time Capsule would automatically delete old backups to make space. Can anyone help me figure out how to get my backups to run again?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Time Machine Error. Backup is too large for the backup disk. Backup requires 289.28 GB but only 177.01 GB are available.

My Mac has not been backing up for some time. Tried Apple Support, but couldn't figure out problem.
Receive the following error...
Time Machine Error
This backup is too large for the backup disk. The backup requires 289.28 GB but only 177.03 GB are available.

See #C4 in Time Machine - Troubleshooting.
If that doesn't clarify the situation, post back with:
How much data is on your internal HD (and any others being backed-up)?
How large is your Time Capsule?
Is there anything else on the TC besides these backups? If so, what and how large?

HT201250 This backup is too large for the backup disk. The backup requires 1.42 TB but only 998.49 GB are available.

I am getting the error ¨This backup is too large for the backup disk. The backup requires 1.42 TB but only 998.49 GB are available¨ when I try to do a time machine backup. I have a Retina Macbook Pro and am only using 250 GB on the internal drive. My 1TB external drive that I am trying to use has been complete reformated (case sensitive journaled) and therefore completely empty. Any ideas why time machine is saying my drive has 1.14 TB when its capacity is no where near that?

Well, at this point I might recommend that you reboot your MacBook Pro while simultaneously holding down the Command - R keys and booting into the Lion Recovery Partition. There I would enter the "Disk Uility", highlight your Mac HD in the left hand column to select it and run "Repair Disk", and then run "Repair Permissions" twice. They may resolve the hard drive's confusion in Time Machine.
Hope this helps

Re Time Capsule: I get this message:This backup is too large for the backup disk. The backup requires 1.38 TB but only 327.08 GB are available. Any suggestions? Please.

CAn anyone make some suggestions regarding this message. 'This backup is too large for the backup disk. The backup requires 1.38 TB but only 327.08 GB are available.'

See #C4 in this terrific document provided by expert Pondini.
http://web.me.com/pondini/Time_Machine/Troubleshooting.html

Screen too large for area. whatto do?

Similar Messages

Maybe you are looking for