Script Component WebService Binary code for the script is not found

I am using SSIS 2012 to access a Public Web Service
http://marketinformation.natgrid.co.uk/MIPIws-public/public/publicwebservice.asmx
However, when adding reference to WebService (not Service Reference),
I receive the dreaded msg "Binary code for the script is not found"
I have spent an age ploughing through the forums.
Many replies seem to suggest not using Script Component to acces WebService.
Should I write a .NET app ?
Any thoughts how I should proceed would be most welcome.
thanks JohnJames

Hi JohnJames,
If I understand correctly, you already add this public web service via Add Service Reference option in the Script Component. Then you receive the error message when you trying to call the bindings and Contract settings stored in app.config file to access
the web service.
Please note that we cannot all the web service normal way as SSIS Script Component task doesn’t recongnise the app.config file. To fix this issue, we should define the BINDINGS via code rather than depending on the App.config file. For more details, please
see the following blog:
http://social.technet.microsoft.com/wiki/contents/articles/22587.consume-webservice-via-ssis-script-component.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

The binary code for the script is not found error for the Script component - SSIS 2012

Hi,
I'm implementing a SSIS 2012 pkg. For a data flow task, I'm using a Visual Basic 2010 script component with an Oracle input flow. For the script component I've an input column and I've created an output column. Inside the script code I've edited only inside
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer).
The written code is:
If Year(Row.OFFDATAORI) < 1900 Then
Row.OFFDATAORIconv = CDate(CStr("1900" + "-" + Right("00" + CStr(Month(Row.OFFDATAORI)), 2) + "-" + Right("00" + CStr(DatePart(DateInterval.Day, Row.OFFDATAORI)), 2))
Else : Row.OFFDATAORIconv = Row.OFFDATAORI
End If
It is to note that OFFDATAORI isn't the name of the input column for the script component.
When I close the script component I've an error about "The binary code for the script is not found".
Any helps to me, please?
Thanks

Hi,
I've solved. There was a syntax error, a bit hidden.
Bye

Web Reference inside Script Task causes Binary code for script not found error

I am attempting to access a SOAP web API (sales force) from a SSIS package. To do this I created a script task.
Inside the script task I went to Add Service Reference. Then I click advanced to make it a web reference. Then I point it to the WSDL file and give it a name SFEnterprise. It successfully finds and adds the Web Reference to the script task.
I leave scriptMain.cs alone and I have no warnrings and no errors. Now in the solution explorer I right-click the script task and hit BUILD. I see the message from Output that BUILD succeeded.
I close the VSTA script editor and now I am back on the control flow window. However I have a red X on the script task with the following message. "The Binary code for the script is not found. Please open the script in the designer by clicking EditScript
button and make sure it builds successfully"
But it does build successfully! And I have not even added any custom code except for the web reference using the WSDL file.
I am using SSIS 2012 and Visual Studio 2012. I have been reading about this binary code error message on Google searches and suggestions about delay validation and turning off pre-compile do not apply to SSIS 2012.
Is SSIS not capable of doing this?

I was wanting to use the 2.0 coding style of accessing the soap service which is supported by adding the web reference vs. adding a service reference. But using a service reference instead of web reference actually allows the script task to compile. This
is really odd behavior. I wonder why one works and not the other.
Changing my C# code over to service reference coding style to access the SOAP service was still returning an error. When I added a break point I found the error message "Could not find default endpoint element that references contract in the ServiceModel
client configuration section"when calling new SoapClient();
I found this page http://www.sqlis.com/sqlis/post/Where-is-my-appconfig-for-SSIS.aspx and after I copied the System.ServiceModel app settings from the script task app.config to the DTSDebugHost.exe.config it was able to successfully login to the endpoint
during package debug mode.
This means I will have to edit the SQL Server DTS config files on the prod SSIS server to get the package to actually run in the job agent.
So for now I am good I think just plugging away at coding what the script task is actually supposed to do now that is can actually login.

Settings NOT saved for the iPod, because- not found

I've a lot of regular changes to make when updating my music library on my iPod. But when I'm in the middle of doing so - that is using TAB "Music" (which "Sync Music" enabled) - and checking all relevant playlists, an error appears:
"The settings were not saved for the iPod “<my iPod name>” because it could not be found."
I don't know what to do because the only related articles all dates back to… 2007! That's 5 years ago!!!
Of course I tried all the solutions of 2007, and when I do other errors occur like:
"iPod sync failed" OR… my iPod simple disappears from the list (and even DEVICES doesn't shows up anymore in the left pane).
THANKS for helping me.

Can you post a link to the article you are referring to?
I assume you have tried using a nother USB sync cable to help rule out the possibility of a faulty one? What about plugging the iPod into a different USB port on your Mac?
It might help to remove any other USB devices you have connected to the Mac. Then reboot the Mac as well as your iPod by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear. Then try to resync.
Could you provide the full text from the error messages you are referring to?
Make sure you are running the latest version of iTunes (10.6.3).
B-rock

I need a permanent fix for the 'mail server not found' bug (iPad 2 3G)

This problem started happening on my iPad 2 (3G AT&T) about 2 months ago. I found the fix posted numerous times on this forum> delete your mail applications & reinstall them which I did (deleted & reinstalled both my gmail & yahoo accts). Same problem reappeared about 2 wks later so I repeated the fix. It happened a 3rd time this wk so I repeated this fix a THIRD time before I left town a few days ago. Here I am 3 days later & it's back AGAIN. FYI...ALL the apps are up to date on my iMac & iPad 2. Can anyone tell me when the fix for this bug is going to be released & what the work-around is?

You have to purchase a data plan to use 3G data but you don't have to purchase a data plan for the iPad to work. You will have full function of the device without a data plan, as long as you have wifi available.
I also have an iPad2 3G. I only sign up for 3G service when I need it, i.e. travelling for an extended period. The rest of the time, I just use wifi at home or whereever I can.

Where to see the transaction code for a script

Hai my dout is where to see the transaction code for a script after assigning to a drive programm for example i see output for medruck in me11 and for other standard scripts where can i see the output is there any table avaible to check it

Hi masthan,
for sd and mm related scripts. u can use tnapr.
Otherwise go to nace transaction u can find the script name as well as program name.
Or u can try with TSTC table, which will give the t/c's.
Regards...
Arun.

How to see programming Code for UCCX Script

Hi All,
How can I see the programming Code for UCCX Script? I have a script and want to see its Code , something like :
int sum = 0;
boolean alternate = false;
boolean isValid = false;
try {
int i = 0;
for (i = ccnumber.length() - 1; i >= 0; i--) {
int n = Integer.parseInt(ccnumber.substring(i, i + 1));
if (alternate) {
   n = n * 2;
   if (n > 9) {
    n = (n % 10) + 1;
sum += n;
alternate = !alternate;
isValid = (sum % 10 == 0);
} catch (Exception e) {
return -1;
return (isValid == true ? 1 : 0);
thanks,
Hamed

You're not going to find code per se, unless you have some java class you wrote and then you would only see the code if you had the source java file. The script is the only interface you get for "code".
david

How to "commit" only certain lines of code in the script file?

Hi there,
Is there a way to execute only certain lines of code in the script file without executing all the code in it. Wihtout using the comment syntax.
e.g: there are lines to create views and in the next set of line there are lines to create procedures. I only want to execute the lines that create views.

another workaround is to create a procedure that accepts parameters. such that the parameter will be the basis for what objects in your conditions that it should met to perform the operations that conform with your business rules. an example is given below.
create or replace procedure create_object(pObjectType varchar2) as
begin
    if pObjectType = 'VIEW' then
    elsif pObjectType = 'PROCEDURE' then
    else
    end if;
end;

How to add add the code for the MouseEvent.CLICK event

Could anyone help me who is a beginner please?
I'd like to know step by step how to do the following
instruction.
I am trying to add a link to my flash.
I drew a shape on the stage, select it and transform it to
movie clip (hit F8 or right-click on it and select "Convert to
symbol" from the popup menu or use the main menu: Modify ->
Convert to symbol). I resized it as the same size as my stage, then
make it transparent.
Then I am supposed to do the following in order to create a
link.
"add the code for the MouseEvent.CLICK event that would open
a url using the navigateToURL() function."
But I just don't know how to. Could anyone tell me step by
step approach please?
Thanks in advance.

Yes, click the frame where you have the button on stage and
open the actions panel. paste the script in, and make sure whatever
instance name you gave the button, you plug into the script. Also,
the function declaration should be like so:
function callFunction(e:MouseEvent):void{ <-- 'e' can be
anything you want, it could be 'kfjeiwajfkd' for that
matter.

Getting Error In the Routine - While writing Code for the Cross Reference.

Hi,
Getting Error In the Start Routine - While writing Code for the Cross Reference from the Text table ( /BIC/TZMDES with Fields /BIC/ZMDES(Key),TXTSH ) Getting Error as [ E:Field "ZMDES" unknown ].
Transformation : IOBJ ZPRJ3(Source) -> IOBJ ZPRJC ( Target ).
The Source Fields are: 0logsys(Key),zprj3(Key),ZDOM3.
The Target Fields are : 0logsys(Key),zprjc(Key),ZDOM3, UID.
Here i am trying to Update the target Field UID by Comparing the Source Field [ zprj3(Key)] with the Text table ( /BIC/TZMDES ) and update the UID.
The Code is as below:
Global Declarations in the Start Routine:
Types: begin of itabtype,
        ZMDES type /BIC/TZMDES-/BIC/ZMDES,
        TXT type /BIC/TZMDES-TXTSH,
         end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Routine Code :
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab.
CLEAR wa_itab.
The tys_SC_1 structure is :
BEGIN OF tys_SC_1,
     InfoObject: 0LOGSYS.
        LOGSYS           TYPE RSDLOGSYS,
     InfoObject: ZPRJ3.
        /BIC/ZPRJ3           TYPE /BIC/OIZPRJ3,
     InfoObject: ZDOM3.
        /BIC/ZDOM3           TYPE /BIC/OIZDOM3,
     Field: RECORD.
        RECORD           TYPE RSARECORD,
      END   OF tys_SC_1.
    TYPES:
      tyt_SC_1        TYPE STANDARD TABLE OF tys_SC_1
                        WITH NON-UNIQUE DEFAULT KEY.
Please suggest with your valuable inputs.
Thanks in Advance

I have split the code in two.. one for start routine.. other for field routine.. hope this helps
Types: begin of itabtype,
ZMDES type /BIC/TZMDES-/BIC/ZMDES,
TXT type /BIC/TZMDES-TXTSH,
end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Start routine
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
Sort itab.
field routine
CLEAR wa_itab.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_FIELD-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab-<field name>

Here the SSCCE code for the prvious problem posted by me.

Following is the SSCCE code for the program of search which is having the problem i have asked before.
here when you run it will show a form which have a search button on it and when you press it a panel will shown below which have a table( it is just a bounded area without any column or row as i have removed the database functionality and we dont have to do with it).
the problem is the same that firstly i want to make the panel invisible.
(the blue and yellow colors are just to seperate the panel and the container) Secondly i want to remove the extra large space added below the last table and thirdly i want that on each press of the search button the scrollbar will focus on the new table added.
import javax.swing.*;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.border.*;
import java.awt.*;
import java.awt.event.*;
public class Temp extends JFrame implements ActionListener
     Container c;
     Toolkit tk;
     JLabel l1; int y=30;
     JPanel p1,p2,p3;
     JRadioButton rbByName,rbBySirName,rbByID,rbByCity,rbByState;
     JButton btSearch,btView;
     ButtonGroup bgSearch;
     JTextField txtSearch; BoxLayout boxl;
     ImageIcon i1;JScrollPane sp1;JViewport vp;
     public Temp()
          super("Search-Address Management System");
          c=getContentPane();
          tk=Toolkit.getDefaultToolkit();
          setSize(1024,768);
          c.setBackground(Color.BLUE);c.setLayout(null);
          setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
          defineComponents();
          settingBounds();
          addListeners();
          addComponents();
          setVisible(true);
     public void defineComponents()
          p1=new JPanel();
          p1.setLayout(null);
          p1.setOpaque(false);
          p2=new JPanel();
          p2.setLayout(null);
          p2.setOpaque(false);
          p3=new JPanel();
          boxl=new BoxLayout(p3,BoxLayout.Y_AXIS);
          p3.setLayout(boxl);
          rbByName=new JRadioButton("First Name");
          rbByName.setOpaque(false);
          rbBySirName=new JRadioButton("Last Name");
          rbBySirName.setOpaque(false);
          rbByState=new JRadioButton("State");
          rbByState.setOpaque(false);
          rbByCity=new JRadioButton("City");
          rbByCity.setOpaque(false);
          rbByID=new JRadioButton("ID");
          rbByID.setOpaque(false);
          btSearch=new JButton("Search");
          bgSearch=new ButtonGroup();
          txtSearch=new JTextField();
          btSearch=new JButton("Search");
          TitledBorder tb=new TitledBorder("Search Criteria");
          TitledBorder tb1=new TitledBorder("Search");
          p1.setBorder(tb);
          p2.setBorder(tb1);
     public void settingBounds()
          rbByID.setBounds(20,30,50,20);
          rbByName.setBounds(120,30,100,20);
          rbByState.setBounds(20,70,80,20);
          rbByCity.setBounds(120,70,50,20);
          rbBySirName.setBounds(240,30,100,20);
          p1.setBounds(30,40,400,110);
          p2.setBounds(30,180,400,80);
          p3.setBackground(Color.ORANGE);
          txtSearch.setBounds(50,210,250,25);
          btSearch.setBounds(320,210,80,25);
          rbByID.setSelected(true);
     public void addListeners()
          btSearch.addActionListener(this);
     public void addComponents()
          p1.add(rbByName);
          p1.add(rbBySirName);
          p1.add(rbByState);
          p1.add(rbByCity);
          p1.add(rbByID);
          c.add(txtSearch);
          c.add(btSearch);
          c.add(p1);
          c.add(p2);
          bgSearch.add(rbByID);
          bgSearch.add(rbByName);
          bgSearch.add(rbBySirName);
          bgSearch.add(rbByCity);
          bgSearch.add(rbByState);
     public void drawtable()
          JTable t1=new JTable()
              public Class getColumnClass(int column)
                return getValueAt(0, column).getClass();
          if(y==30) //as temporay variable only to add the scrollpane once
               sp1=new JScrollPane(p3,JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
               sp1.setBounds(30,300,660,380);
               c.add(sp1);
          JScrollPane sp=new JScrollPane(t1);
          sp1.getViewport().setOpaque(false); // to make the scrollpane transparent but not worked
          sp.setMaximumSize(new Dimension(600,100));
          p3.add(Box.createRigidArea(new Dimension(600,20)));// invisible filler to add space between two tables
          p3.add(sp);
          p3.revalidate();
          y=y+110;
     public void actionPerformed(ActionEvent e)
          if(e.getSource()==btSearch)
          drawtable();
     public static void main(String args[])
          new Temp();
}Please reply with the code required to be added.

the problem is the same that firstly i want to make the panel invisible.If I remember you other postings I think you mean to say transparent, which means the background of its parent component will be painted. If you make the panel invisible, then all the component added to the panel will also be invisible.
You have a structure something like this:
main panel
    - scroll pane
        - viewport
            - table panel
                - table1
                - table 2As you where told in one of you many other posting on this topic, if you want the background of the main panel to show through then you need to make all the component on top of the pane non-opaque, not just the viewport. So, the scroll pane and table panel also need to be changed.
And don't forget to reply to all your other postings on this topic stating that those postings are "closed" so people don't waste time answering in those postings. Keep the conversation in one posting so everybody knows what has been suggested.

Remote infrared codes for the Sony STR-DE675 receiver

Where can I find the remote infrared codes for the Sony STR-DE675 receiver? They are not in the Owner's Manual, nor on the Sony.com website. Thanks.GBP

If you were getting sound and no picture when you had the Wii hooked up to your surround sound receiver, your TV was probably on the wrong input. You would have needed to use the source or input button on your TV's remote and changed the input to the component 1 choice, since that is the port you stated you plugged the Wii into on the TV.
Your cable remote may not be programmed to work with the blu-ray player. However, I think you're misunderstanding the function of the buttons at the top of your remote labeled TV, Sat/Cab, VCR, etc. Your cable remote doesn't work like a Harmony remote. Pushing those buttons at the top of your cable remote are not like pushing the Watch TV or Watch DVD functions on a Harmony (meaning pushing them doesn't change the TV's input automatically). All those buttons at the top of the remote are for that you're describing are to tell the remote which components to control. For example, you are watching cable TV and just used the remote to change the channel but now you want to adjust the volume. You would have to hit the "TV" button on the cable remote to switch the remote from controlling the cable box to controlling the TV. Otherwise, you'd hit the volume controls over and over and nothing would happen b/c the remote would still think it was controlling the cable box. Only a Harmony remote (or similar universal remote) can change the TV's input with the click of a function button.
And to explain why one must change the TV's input when switching components, I always compare the process to the way a tube TV used to work for those that are new to the flat screen TVs. Think of the way your old TV probably worked - you had to have the TV on channel 3 for your VCR, 4 for cable, etc. The input changing is practically the same thing with just a few more steps, if that helps to make things any clearer. LOL
Nothing I post is an official statment of Best Buy or Geek Squad, it is only a helpful opinion!

Where is the code for the collapse button in the default SAP iview layout?

I need to eliminate the collapse/restore button displayed on each iView tray. I was looking at the default layout component (com.sap.portal.layouts.default) but I could not find the code for the tray. The code for "FullWidth.jsp" (this file that implements the "FullWidth" component) is below:
<%@ taglib uri="prt:taglib:com.sap.portal.reserved.layout.TagLibHtmlb" prefix="hbj" %>
<%@ taglib uri="prt:taglib:com.sap.portal.reserved.layout.TagLibLayout" prefix="lyt" %>
<lyt:template>
    <hbj:content id="myContext" >
        <hbj:page title="Portal Page">
            <lyt:container id="column1" />
        </hbj:page>
    </hbj:content>
</lyt:template>
as you can see, there is no reference to the tray tags.
note: I am familiar with how to create a new iView tray using the new Layout Tag Library (from blog below)
EFP: Layout Tag Library
, but I want am not interested in this approach... All I want is to modify the EXISTING tray.

Hi,
may be it's helpful for you.
http://blog.flexexamples.com/2010/05/18/changing-the-background-color-of-a-disabled-spark- textarea-control-in-flex-4/
Regards
-Bechar

ABAP Routine code for the below logic

Hello BW Experts ,
I need to write a complex ABAP routine in BW .
Following is the detail explaination .
Can anyone tell me the ABAP code for the below logic?
It would be a greate help as I am unable to do this
since last two days.
WBS Elements are maintained at IOS and Warranty levels in R/3 side.
The IOS WBS is a top level of WBS element and below that the Warranty WBS level.
The IOS and Warranty WBS elements can be differentiated by means of priority field.
When priority = i   , WBS Element is known as IOS Level WBS Element and
When priority = Y the WBS element is known as Warranty WBS element.
The Equipment Number is maintained compulsorily at IOS Level WBS elements only.
It is not maintained at Warranty WBS Element.
But the Cost is maintained at Warranty WBS Elements.
In BW I need all Warranty WBS ( priority = Y) along with their cost figures and Equipment Numbers.
But as the Equipment Number is not maintained compulsorily at Warranty WBS level we have asked to
Copy it from IOS WBS ( priority = i ) and assign it to Warranty WBS level ( priority = Y ).
So I have included the Equipment Number in the ODS and in update rules I need to write the routine for it as
per the above logic.
The Equipment Number is coming from Master data of WBS Element.
The WBS element master data we are loading in BW .
Also the same WBS Element transaction data is coming from the transaction data data source in BW.
Following fields / infoobjects and the table names in BW :
1. Equipment Number : /BIC/ZEQUIPMNT and table name /BIC/MZWBS_ELEM.
2. WBS Element       : ZWBS_ELEM is coming from transaction data data source as well as master data.
                                 In ODS update rules it is coming from transaction data data source Comm_structure-ZWBS_ELEM.
                                 Also we are loading separetly the master data for ZWBS_ELEM.
                                 The ZEQUIPMNT is an attribute of ZWBS_ELEM.
3. Priority                : PRIORITY     and table name /BIC/MZWBS_ELEM.
                                  The info object name for Priority is 0Priority but in master data table /BIC/MZWBS_ELEM
                                  the field name is    PRIORITY.
                                 When PRIORITY = ' i ' then    ZWBS_ELEM is at IOS Level
                                 When PRIORITY = ' y ' then ZWBS_ELEM is at Warranty Level.
4. ODS name : /BIC/AZCOST00 and same is table name active data table .
So please tell me the routine Code .
Best Regards ,
Amol.

Hi Dinaker,
Did you find any solution for this issue. I too have a similar requirement of pulling all the service orders for a specific Purchase Order in the BW report.
Thanks,
SAPBWI

Is there any differnce between the Numeric Limit Test source code from TestStand 3.0 to TestStand 3.1? How to get the source code for the Numric Limit Test for both the versions?

I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
Thanks,
Jeyan

Hi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer

Script Component WebService Binary code for the script is not found

Similar Messages

Maybe you are looking for