Script header window getting blank

Dear All,
I having using Standard script for quality certificate, In that i am having two pages first and Next. In first page three windows are there Header,Main,Footer and in next page same windows like first page..
Now if output is of one page then data in Header window is coming correctly. But if Main window is moving to Next page first page header is coming blank. here the problem is that i have used subroutine on field Insp Lot while executing first page insp lot value is coming blank and for next page it is coming corectly.....How to solve this.
Thanks,
Ashish.

Hi,
Main window will extend to another page if data exceeds. The other two windows are not main windows.
Try to use Top EndTop to get the header in every page
The TOP...ENDTOP is used to set the header and BOTTOM...ENDBOTTOM is used to set the footer texts in the main window respectively.
These are displayed on the start and end of every new page in the output.
To disable these texts enclose empty commands between the commands.
/: TOP
/: ENDTOP
/: BOTTOM
/: ENDBOTTOM
Check this [Wiki|http://wiki.sdn.sap.com/wiki/x/nAKmB]
Hope this solves the issue.
Regards,
Rajani

Similar Messages

Problems using orkut in Firefox 3.6.13 . Chat window get blank most of the time & some issue while loding page (Signout tab get disappear)

Hi Support team,
I am facing multiple issue while using orkut on mozilla firefox 3.6.13.
I have windows 7 ultimate edition installed on my laptop.
First issue is while i using orkut in firefoz, most of the time chat window will not referesh (as webpage refresh) and all the contact of chat window will get disappear (blank) from there.
second issue is sometimes logout page will get disppear from webpage and that time we are not able to get there while refreshing the page also.
Please suggest...

Well, the computer stopped starting up at all. It could never find the operating system. I tried safe mode and virtually every other non-standard start-up option. I then did target disk mode with another MBP and got the message: "The disk you inserted was not readable by this computer." I then tried using disk utility and it couldn't retrieve retrieve the data using restore (writing to an external drive). I suspect that this means the hard drive would need to be replaced. In your expert opinions, is this necessarily true? Could this still be just a software problem, or perhaps some other piece of hardware?
Part of the reason I ask is that this laptop is now nearly five years old. It's needed a new battery for two years. If it's a virtual certainty that the hard drive is toast, I don't want to pay $150 for someone to take it out and try to recover any remaining data from it, only to reveal that the data is indeed irretrievable (since the computer itself is probably only worth $300-400 at this point). The nearest Genius Bar is also more than 2 hours away. Am I going about this the right way by using disk utility, given that the hard drive won't mount to the desktop of the other computer? If the hard drive can't be reat in target disk mode, does that confirm that it is the hard drive?
Thanks
Oh also, it does still make the startup noise, even though I can't run the AHT since I can't get it to start up in safemode. I thought this mean that it passing various hardware tests. Does this not apply to the hard drive?
Message was edited by: Euain_ *add-on*

I have stopped too many scripts in Firefox and I can't open any websites in Firefox anymore. I just get blank pages. What do I do now?

3 websites gave me this message:- "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete." I chose to stop the script each time. However I have stopped too many scripts in Firefox and I can't open any website in Firefox anymore. I just get blank pages. What do I do now?

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Every time I open Mail it fails to respond, the windows stay blank and I get the beach ball and can only close it by force closing. Any ideas?

Every time I open Mail on my Macbook Pro, which is only a couple of weeks old, it fails to open, the windows stay blank and I get the beach ball. The only way I can get it to close is to force it using the command alt esc buttons. Any ideas?

Hi Elijahcross,
If you are having issues with iTunes freezing shortly after opening, you may find the troubleshooting in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden

Read header text from vf01 and print in script main window

Hi Gurus,
           I need to read text from vf01 header note 1, there user type max 10 lines i want to read that 10 lines and print in sap script main window after line item printed. i used read text but one line only fetched. i declare variable like data : NEXRSP LIKE TLINE-TDLINE and read_text function module. pls provide solution for this.
Regards
G.Vendhan

HI GURUS,
Thank u for reply i declare like
    ID = '0002'.
    PERFORM READTEXT USING EN NAME OBJECT ID TEXT_OUTPUT.
    NEXRSP = TEXT_OUTPUT . CLEAR TEXT_OUTPUT.
FORM READTEXT USING    P_EN
                        P_NAME
                        P_OBJECT
                        P_ID
                        P_TEXT_OUTPUT.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      CLIENT                  = SY-MANDT
      ID                      = P_ID
      LANGUAGE                = P_EN
      NAME                    = P_NAME
      OBJECT                  = P_OBJECT
    TABLES
      LINES                   = LINES
    EXCEPTIONS
      ID                      = 1
      LANGUAGE                = 2
      NAME                    = 3
      NOT_FOUND               = 4
      OBJECT                  = 5
      REFERENCE_CHECK         = 6
      WRONG_ACCESS_TO_ARCHIVE = 7
      OTHERS                  = 8.
   LOOP AT LINES.
    P_TEXT_OUTPUT = LINES-TDLINE.
    EXIT.
   ENDLOOP.
FREE LINES. CLEAR LINES.
ENDFORM.                    " READTEXT

My creative cloud window is blank i have called many times to get ti fixed it works for a week then comes up blank again

my creative cloud window is blank i have called many times to get ti fixed it works for a week then goes blank i need help

Chuck Palmer what steps have you utilized to resolve the issue previously? You mentioned you were in contact with our support team. Do you have a case number which I can reference to review the notes?

I click on Farmville Game in FB to play, get blank window pop up w/ "Mozilla Firefox" at top. As blinks off some long code states proxy something. Only on FB Farmville game. nothing different. Blinks on & off continuously, difficult to play game.

When I click on Farmville Game in Facebook to play, keep getting blank window popping up w/ "Mozilla Firefox" at the top. Then blinks off some long code that states proxy something. Only does it on FB Farmville game. Did nothing different. Blinks on & off continuously, difficult to play game.

When I click on Farmville Game in Facebook to play, keep getting blank window popping up w/ "Mozilla Firefox" at the top. Then blinks off some long code that states proxy something. Only does it on FB Farmville game. Did nothing different. Blinks on & off continuously, difficult to play game.

Suppressed Header but in the same place getting blanks.

I have Suppressed Headers which was printing in all pages but in the same place/location, Iam getting blank space. Is there any other way other than using anchors to avoid this space problem.

it works even inside fields are fixed width. Thankyou fs
I have one more problem. My report has 2layouts based on parameter Iam printing each one on to the screen.
First layout is working fine and when I try to run the second layout which is below the first one ,and after grand total section(which is separate frame).
On the screen(apps output) Iam getting a page break symbol and all the column headers are printed once without data(blank page). Then from second page onwards its working fine. But the same pagebreak is appearing in between all the pages. How to over come this? please help me.

The moment i select option under the heading tools mozilla crashes and window get closed

have updated to Mozilla Firefox 20 after restarting the computer I clicked on Tools and selected the options the moment i clicked on options Mozilla Firefox window get closed then i have to restart it and asked to restore the earlier windows.

Hi philipp thanks for your response , there is no crash reports available in about:crashes and further the same problem is occurring while I try to download any file.
Thanks & Regards

Open e-mail only get blank page and header

open e-mail and only get blank page and headers please help

hi thanks for your reply no it's not all that was sent to us we have about 24 and only a few will open properly. i was told it could be something to do with aol pop. our outgoing mail server just says mail. and then our name.

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

I can export many iphoto events to a Data stick. I want to do the same with a DVD. When I do the DVD window is blank. If I drag and drop can only do one. Help

I can "export", using file, many iphoto events to a data disk. When I do the same to a DVD the DVD window is blank and nothing has been exported. When I use drag and drop to a DVD it works but I can only get one event on the disk. How do I export many iphoto events to a DVD. I am using a write only DVD. I am using a Mac Book Pro OS 10. Thanks in advance.
Gord

When I click on the data stick icon on my desk top a window comes up. It lists the various events that I have exported. If i click on an event each picture shows up in a list. I can click on the picture and view a jpeg photo or view a avi video. When I export I select "original" as the file type. When I export to a DVD and klick on the the DVD icon the window shows up but it is blank.

OTF to PDF - Getting blank PDF Internal table with CONVERT_OTF func module

All
i've captured OTF from smartforms and tried converting to PDF through 'CONVERT_OTF_2_PDF' FUNCTIOn module and after emailing to external email id, i found logo is completely disturbed (characters in logo got mixed up)..... later i tried converting with ''CONVERT_OTF' function module, but here i'm getting blank PDF internal table....
what am i missing in both ?
my intention is converting otf to pdf and emailing...though there are thousands of similar threads are available , none of them are related to my exact problem, which is logo is getting mixed up or disturbed.... any suggestions ?
Thanks in advance

Hi,
You need to use the function module SX_OBJECT_CONVERT_OTF_PDF to create the PDF from OTF ..
Here is an example program
report ZPDFPRNT no standard page heading.
TABLES: TST05.
DATA: BEGIN OF ITAB OCCURS 0,
   TLINE(255),
END OF ITAB.
DATA: BEGIN OF ITAB2 OCCURS 0,
TLINE(255),
END OF ITAB2.
DATA: BEGIN OF ITAB3 OCCURS 0,
TLINE(255),
END OF ITAB3.
DATA: BEGIN OF OTF_TAB OCCURS 0,
TLINE(255),
END OF OTF_TAB.
DATA: LEN_OUT LIKE SOOD-OBJLEN.
DATA: LEN_IN LIKE SOOD-OBJLEN.
DATA: BEGIN OF DATA_SET OCCURS 200,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
END OF DATA_SET.
DATA: BEGIN OF OTF_PAGE OCCURS 200.
INCLUDE STRUCTURE ITCOO.
DATA: END OF OTF_PAGE,
OTF_PAGES TYPE P,
OTF_MAX_PAGES TYPE P VALUE 10.
DATA: BEGIN OF OTF_CONTROL.
INCLUDE STRUCTURE ITCPP.
DATA: END OF OTF_CONTROL,
FORCE_RAW_OTF VALUE ' ',
L100_EXCLUDE(4) VALUE 'OTFJ',
BEGIN OF OTF_PAGE_INDEX OCCURS 20,
LINE_NUM TYPE P,
END OF OTF_PAGE_INDEX,
CUR_OTF_PAGE VALUE 1.
DATA: DATA_SET_LINECOUNT TYPE P,
DATA_SET_MAX_LINES TYPE P VALUE 100000,
DATA_SET_VALID TYPE C VALUE ' ',
DATA_SET_IS_OTF TYPE C VALUE ' ',
DATA_SET_LENGTH(5) TYPE C,
LINE_SPECIAL LIKE DATA_SET-DATA_LINE,
NEED_LINE_SPECIAL TYPE C,
DSN_TYPE(8) TYPE C.
DATA: FCODE(4) TYPE C,
DATE TYPE D,
TIME TYPE T,
RC(10) TYPE C,
ERRMSG(100) TYPE C,
PRINTJOB_CREATED(1) TYPE C,
PRINTJOB_CLEARED(1) TYPE C,
PRINTJOB_LIST(1) TYPE C,
DISPLAY_MODE(1) TYPE C,
LINE_MAX TYPE P VALUE '100000',
NEW_SCREEN_300(1) TYPE C,
MULTI_PRINT_300(1) TYPE C,
PRINT_ALL_300(1) TYPE C,
PRINT_COUNT_300 TYPE I,
SHOW_USER_100 TYPE C VALUE ' ',
ERROR_DISPLAY_LEVEL TYPE C VALUE '9',
NEXT_ERROR_DISPLAY_LEVEL TYPE C,
PREV_ERROR_DISPLAY_LEVEL TYPE C,
START_300(5) TYPE C, END_300(5) TYPE C,
SEP LIKE SY-VLINE,
DEFAULT_PRI,
TSP01_BUF LIKE TSP01,
TSP01_CURLINE LIKE SY-STARO,
TSP01_CURCOL LIKE SY-CUCOL,
TSP01_CURROW LIKE SY-CUROW.
DATA: BEGIN OF DATA_SET_LINE,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
END OF DATA_SET_LINE.
DATA: STATUS LIKE SY-SUBRC.
DATA: WGF_MESSAGE(80).
DATA: H_PATH(20) TYPE C.
DATA: H_MASK(20) TYPE C VALUE ',.pdf ,.pdf. '.
DATA: FILE_NAME(20).
DATA: FILENAME LIKE RLGRAP-FILENAME.
DATA: IMPORT(132).
PARAMETERS: IDENT(5) TYPE C.
PERFORM GET_OTF_TAB.
LOOP AT OTF_PAGE.
   OTF_TAB-TLINE = OTF_PAGE.
   APPEND OTF_TAB.
ENDLOOP.
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
FORMAT_SRC = 'OTF'
FORMAT_DST = 'PDF'
DEVTYPE = 'ASCIIPRI'
LEN_IN = LEN_IN
IMPORTING
LEN_OUT = LEN_OUT
TABLES
CONTENT_IN = OTF_TAB
CONTENT_OUT = ITAB2
EXCEPTIONS
ERR_CONV_FAILED = 1
OTHERS = 2.
PERFORM GET_PATH USING 'PDF_FILE'.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FILENAME
FILETYPE = 'BIN'
BIN_FILESIZE = LEN_OUT
TABLES
DATA_TAB = ITAB2
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
*& Form GET_OTF_TAB
FORM GET_OTF_TAB.
DATA: PART(4) VALUE '0001',
BEGIN OF MSG,
A(40),
B(40),
C(40),
END OF MSG.
REFRESH DATA_SET.
DATA_SET_LINECOUNT = 0.
DATA_SET_IS_OTF = ' '.
OTF_PAGES = 0.
REFRESH OTF_PAGE_INDEX.
CALL 'RSPOACSD'.
SELECT * FROM TST05 WHERE DTHREAD = 'X'.
CALL 'RSPOAOSD'
ID 'ID' FIELD IDENT
ID 'TYPE' FIELD TST05-DTYPE
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
DSN_TYPE = TST05-DTYPE.
IF DSN_TYPE(3) = 'OTF'.
    DATA_SET_IS_OTF = 'X'.
ENDIF.
ENDIF.
IF STATUS <> 24. EXIT. ENDIF.
ENDSELECT.
DATA_SET_VALID = 'X'.
DATA_SET_MAX_LINES = ( LINE_MAX * '1.1' ) + 100.
DO.
CLEAR: DATA_SET_LINE, DATA_SET_LENGTH.
CALL 'RSPOARSD'
ID 'BUFF' FIELD DATA_SET_LINE+5
ID 'DATALEN' FIELD DATA_SET_LENGTH
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 36.
WHILE STATUS = 36.
CALL 'RSPOACSD'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ADD 1 TO PART.
IF DATA_SET_IS_OTF = ' '.
CALL 'RSPOAOSD'
ID 'ID' FIELD IDENT
ID 'TYPE' FIELD DSN_TYPE
ID 'PART' FIELD PART
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ELSE.
CALL 'RSPOAOSD'
ID 'ID' FIELD IDENT
ID 'PART' FIELD PART
ID 'TYPE' FIELD DSN_TYPE
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ENDIF.
IF SY-SUBRC NE 0. EXIT. ENDIF.
CLEAR: DATA_SET_LINE, DATA_SET_LENGTH.
CALL 'RSPOARSD'
ID 'BUFF' FIELD DATA_SET_LINE+5
ID 'DATALEN' FIELD DATA_SET_LENGTH
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ENDWHILE.
ENDIF.
IF STATUS <> 0 AND STATUS <> 40. EXIT. ENDIF.
DATA_SET = DATA_SET_LINE.
IF NOT ( DATA_SET_LENGTH IS INITIAL ).
DATA_SET-DATA_LENGTH = DATA_SET_LENGTH - 1.
ENDIF.
APPEND DATA_SET.
ADD 1 TO DATA_SET_LINECOUNT.
IF DATA_SET_IS_OTF = ' '.
IF DATA_SET_LINECOUNT >= DATA_SET_MAX_LINES.
CLEAR DATA_SET.
APPEND DATA_SET.
MOVE '----
' TO DATA_SET-DATA_LINE.
APPEND DATA_SET.
CLEAR DATA_SET.
APPEND DATA_SET.
WRITE: 'Abbruch nach'(029) TO MSG-A.
WRITE: DATA_SET_MAX_LINES TO MSG-B.
WRITE: 'Zeilen.'(030) TO MSG-C.
CONDENSE MSG.
DATA_SET-DATA_LINE = MSG.
APPEND DATA_SET.
EXIT.
ENDIF.
ELSE.
MOVE DATA_SET_LINE-DATA_LINE TO OTF_PAGE.
APPEND OTF_PAGE.
IF OTF_PAGE(2) = 'EP'.
ADD 1 TO OTF_PAGES.
IF OTF_PAGES >= OTF_MAX_PAGES.
    MESSAGE S229(PO) WITH OTF_MAX_PAGES.
    EXIT.
ENDIF.
ELSEIF OTF_PAGE(2) = 'OP'.
OTF_PAGE_INDEX-LINE_NUM = DATA_SET_LINECOUNT.
APPEND OTF_PAGE_INDEX.
ENDIF.
ENDIF.
ENDDO.
IF STATUS <> 0 AND STATUS <> 12.
CALL 'RSPOACSD'.
MESSAGE E112(PO) WITH STATUS RC ERRMSG.
ENDIF.
CALL 'RSPOACSD'.
STATUS = SY-SUBRC.
IF STATUS <> 0.
MESSAGE E112(PO) WITH STATUS RC ERRMSG.
ENDIF.
ENDFORM. " GET_OTF_TAB
*& Form GET_PATH
FORM GET_PATH USING P_FILENAME.
CLEAR: H_PATH, FILE_NAME.
FILE_NAME = P_FILENAME.
CALL FUNCTION 'WS_QUERY'
EXPORTING
QUERY = 'CD' "// Current Directory
IMPORTING
RETURN = H_PATH.
CONCATENATE FILE_NAME '.pdf' INTO FILE_NAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = FILE_NAME
DEF_PATH = H_PATH
MASK = H_MASK
MODE = 'O'
IMPORTING
FILENAME = FILENAME"dbname
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
ENDFORM. " GET_PATH
Regards
Sudheer

When I open a PDF with Firefox 4 I get blank new tabs continuously opening without stop. How do I fix this?

When I open a PDF with Firefox 4 I get blank new tabs continuously opening.

See:
* [[Firefox keeps opening many tabs or windows]]

In Safari 8.0.2 extension window is blank

When opening Safari prefs and opening the extension tab, the window is blank except for 'get extensions'.
When I want to install extensions I get the message: first switch on extensions. But how? The button is not there (anymore) !

Uninstall "SIMBL" or "EasySIMBL" as follows. Back up all data before making any changes.
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar, paste into the box that opens by pressing command-V, then press return. A folder will open. From that folder, delete the items listed below (some may be absent.) You may be prompted for your administrator login password.
          Application Support/SIMBL
          InputManagers/SIMBL
          LaunchAgents/net.culater.SIMBL.Agent.plist
          LaunchAgents/net.infinite-labs.SIMBLEnablerForSandboxedApps.plist
          ScriptingAdditions/EasySIMBL.osax
          ScriptingAdditions/SIMBL.osax
Log out and log back in. There may also be an item named "EasySIMBL" in the Applications folder. Delete it, if so.
Make sure you never reinstall any variant of SIMBL. It’s likely to come bundled with another third-party system modfication that depends on it. If you want trouble-free computing, avoid software that makes miraculous changes to other software, especially built-in applications. The only real exception to that rule is Safari extensions, which are mostly safe, and are easy to get rid of when they don’t work. SIMBL and its dependents are not Safari extensions.

Script header window getting blank

Similar Messages

Maybe you are looking for