Scripting on SAPGUI 6.4 is not reliable

I use it with 6.1,6.2 and as soon as it was delivered.
No problem. Now for unattended reason the user part of the interface can shrink and the controls are not there.
Am I alone?
Didier

Dear Didier,
I don't think anybody at SAP is aware of this problem. Please create an OSS message about it so we get a chance to fix it.
Thanks!
Best regards,
Christian

Similar Messages

Not Reliably Going To Sleep With Lid Open?

I've had my new MacBook Pro for a few days. I think it is absolutely brilliant. However, last night I left it running on battery with the lid open and returned to find the battery dead. It will go to sleep if you shut the lid or select sleep from the Apple menu.
I called Apple and they talked me through numerous procedures including resetting the SMC, PRAM, deleting various plists and finally a permissions repair on the disk. The latter seemed to make it work.
However, I've found this evening that it still does not reliably go to sleep with the lid open and I really can't work out why. It doesn't seem to be linked to a particular application. Sometimes even if I only have the finder running it will not go to sleep.
When it does work, the computer takes 2-3 minutes to go to sleep after the display sleeps.
I'm running Snow Leopard with all the available updates.
Please can anyone suggest what I might do next?

Hi,
I've been struggling with same issue too, idle timer sleep just didn't work most of the time. I am a recent convert from Windows world and there were never issues with PC to go to sleep after idle timeout. With SL it was not so easy.
However, I found a reason (Or two actually) why it was not sleeping, after going through my applications and web pages one by one.
One of them is flash plugin in browsers, if I had any page open with flash, the computer would not sleep. Apparently flash somehow makes SL think it is not idle. Solution to this was to set up flash blockers to browsers. Which is not bad thing overall, flash is mostly adverts anyway on the pages I visit.
Other one was facebook, even with flash disabled. Something in their real-time updating of statuses again prevents sleeping. I tried disabling java and java script too, it might help but then facebook does not work at all. Solution is to always close facebook after using it. Not a really good one, it's easy to forget running.
Hope this helps!

I have IMAP mail. My sent messages do not reliably show up in Sent mail. Why?

I have IMAP email. My sent message do not reliably show up in Sent Messages. Is this a common problem and is there a fix?

Hi rgw1130,
I am sad to hear about the screen on your phone. If you do not have Back Up Assistant set up, then all your contacts will not sync. Have you checked with your Gmail account to see if your contacts are there? Keep us posted.
Thanks, BobbyS_VZW
Follow us on Twitter @VZWSupport

SSDP discovery on Windows Store App not reliable

Hi,
I am having problem implementing SSDP discovery in windows 8 store program. Below is the code:
public async Task SearchForDevices()
var socket = new DatagramSocket();
socket.MessageReceived += async (sender, args) =>
Debug.WriteLine("Received data" + DateTime.Now);
DataReader reader = args.GetDataReader();
uint count = reader.UnconsumedBufferLength;
string data = reader.ReadString(count);
Debug.WriteLine(data);
var response = new Dictionary<string, string>();
foreach (
string x in
data.Split(new[] {"\r\n", "\n"}, StringSplitOptions.None))
if (x.Contains(":"))
string[] strings = x.Split(':');
response.Add(strings[0].ToLower(), x.Remove(0, strings[0].Length + 1));
Device device = await GetXml(response);
Debug.WriteLine("Device found");
if (DeviceFound != null)
DeviceFound(this, new DeviceFoundEventArgs(device));
await socket.BindEndpointAsync(null, "");
HostName hostName = new HostName("239.255.255.250");
socket.JoinMulticastGroup(hostName);
string message = "M-SEARCH * HTTP/1.1\r\n" +
"HOST: " + hostName.DisplayName + ":1900\r\n" +
"ST: upnp:rootdevice\r\n" +
"MAN: \"ssdp:discover\"\r\n" +
"MX: 3\r\n\r\n";
DateTime start = DateTime.Now;
TimeSpan interval = new TimeSpan(0, 0, 30);
Debug.WriteLine(start);
IOutputStream stream = await socket.GetOutputStreamAsync(hostName, "1900");
var writer = new DataWriter(stream) { UnicodeEncoding = UnicodeEncoding.Utf8 };
writer.WriteString(message);
await writer.StoreAsync();
await Task.Delay(1500);
This code is not reliable at all. About 50% times it can't find a connected device while other discover can find. But sometimes it works.
My network sniffer (SmartSniff) sometimes can't even capture its SSDP request even though I have made the call many times.
I don't think this is an async problem since it does work occasionally. Please help me. Thanks!

Hi Jeff,
I have an additional question to this thread.
I try to share code between WinRT and Windows Phone 8 using similar code.
Starting on Windows Phone 8 I ommited the following lines:
await socket.BindEndpointAsync(null,
socket.JoinMulticastGroup(hostName);
This worked fine on the Phone. MSDN mentions for BindEndpointAsync,
that GetOutputStreamAsync also leads to a binding.
I could receive answers. but when I tried to use this on WinRT/Windows Shop I did not receive anything. I had to put in the two lines of code from above.
This is not how it is supposed to be, right?
Stefan

10.5 server: could not reliably determine the server´s fully qualified doma

I bought mac 10.5 server unlimited clientes, yesterday I tried to install the software 3 times and never worked (from basic to advanced apple preconfigurations). I had the carrier support yesterday to verify that it is not a problem of the link.
the server has static IP, manually asigned.
server admin: computer name www.MMM.com, local hostname: www, network interface: ethernet (0), ipv4, add 201.122.etc.etc) dns name: dsl-201-122-63.etc !here LEOPARD is taking the address from the DSLÑ provider,!!!!! and I dont know how to change, but the address is entered manually in the network preferences!!!!!.
I go to admin server: server name: www.MMM.com, services: DNS and WEB : ON
DNS: Zones; www.MMM.com, type: primary
Homepage: Service: www.MMM:com:80
(also, I tri8ed with A redord www, type machine, value: 201.122.etc.etc)
WEB: enabled domain name www.MMM.com address (any or 201.122.etc.etc), port 80,webserver
alias: MMM.com, web services enabled: all.
also enabled default address any, port 80
stop, and start web service.
error log:
httpd: aprsockaddr_infoget() failed afor www.MMM.com
httpd: could not reliably determine the server´s fully qualified domain name, using 127.0.0.1 for server name..
any idea about how to correct that? I tried also the new installation, formating the disk, and the server software is not configurating the server correctly)the easy and advances installation are not working correctly).
thanks a lot
Alberto

ok,
I formated the MAC server for 4th time, installed again the server software, then I went for the Basic configuration. then entered the adress manually, then you have to delete the DNS entry (set it in blank), then in the next window enter the NS (which is the server name). then continue the installation.
after starting the web service is running and it is resolving address.then you can upgrade to the advanced configuration and install the other services.
in that order the www is resolving the address.

OOTB script supplied with Illustrator CC does not work

Hi everybody,
I'm searching someone that could tell me how to use the scrpit supplied out-of-the box with Illustrator CC whose french name is "EnregistrerDocAuFormatSVG". As I have only a french version of the product, I do not know the english name. This script is supposed to export all opened files in Illustrator in SVG format in a suppplied folder.
Each time I used it, the SVG that is done is not correct whereas the same operation I have done manually using "Save As..." is working. In other words, the SVG done manually is not the same as the SVG done using the script !!!
So I think that there are some errors in the script or some missing configuration.
Please help me solve this problem.
I already post a french post for this problem, but it seems that the community is more english people...so I repost the post in english.
I will also post the same post in "Scripting Illustrator forum", because I do not know which forum is the best to receive such a problem.
Eric.

Thanks you,
Hi,
I was just reading this part of reference guide when you answered to me.
After some tries, I succeded modyfing the original script so that SVG is saved in a good way...
But now my work is not finished: I need to automate this three steps in whatever way.
I thought that the best way was to automate the processus of loading a file and running the script using automation...but even if the program is working, the result is not good (I do not understand why). When having a phone call with support technical team, I understood that whereas Illustrator permits to automate, this operation is not supported.
So I have to find another way that is supported by Adobe to do the same thing as the automation function...
I though that I could write a command line that could take a paramter (my input file I want to convert) and run Illustartor with some program line parameters.
Is there some way to run a script after having open a file in Illustrator ?
Eric.

Run C# scripts daily/hourly in remote place , not locally

Hi, I'm a beginner in automation tasks. I don't have experience on it.
I have 2 scripts in C# (and one in CLI of CollabNetTeamForge,but for now we can forget about this last one).
These scripts generate two XML docs which are connected and synchronized in a SharePoint Portal.
I tested this architecture-flow locally from-in my PC and it works but what
I want to do is automatize the execution and fix a remote storage of this flow-scripts. I want to fix a "task" which
execute and save hourly this scripts in-from
a external path (not locally in my PC) in order to keep updated the info (XML docs) in SharePoint without human intervention.
I tried to find info but I still a bit lost. I don't know what platforms or resources let me do this :if a need a server , Power Shell , VS Timer Tasks , Cloud like Sky Drive...
Could someone point me in the right direction?

If you're wanting to do this mainly in SharePoint, you'll need to create a custom timer job.
We can walk you through how to do this, or you can check out this link:
http://msdn.microsoft.com/en-us/library/cc406686(v=office.12).aspx
If the MSDN article is too cumbersome, I've created quite a few of these and can walk you through it.
Brandon James SharePoint Developer/Administrator

I recently got my iphone from AT&T which came with a charger and know the charger says "this cable is incompatible with this iphone and is not reliable" can anyone tell me how I can fix this or what to do?

I recently got my iphone from AT&T which came with a charger and know the charger says "this cable is incompatible with this iphone and is not reliable" can anyone tell me how I can fix this or what to do?

Contact AT&T to have them replace the cable.

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

Airport Extreme's support for streaming video NOT reliable for RealPlayer

AIRPORT EXTREME BASE STATIONS DO NOT RELIABLY PROVIDE STREAMING SUPPORT USING NORMAL TRANSPORTS FOR REALPLAYER.
Based on a problem I've had for a long time and information provided in RealPlayer OnLine Help, it appears that the Airport Extreme Base Stations do not reliably provide streaming support using normal transports for RealPlayer.
HERE'S THE REASON FOR CONCLUDING THAT
Even after updating with the latest software and firmware available for my Airport Extreme Base Station, RealPlayer will not play streaming video when my iMac is online via my Airport Extreme Base Station.
(The configuration is iMac (non-wireless) --> Ethernet cable --> Airport Extreme Base Station --> DSL modem.
Note that with that configuration I can browse the internet and play audio through RealPlayer - even though I cannot play streaming video.
In contrast, when my iMac is connected directly to my DSL modem via an Ethernet cable, then I have no trouble playing streaming video in RealPlayer.
HERE'S THE "WORK AROUND" SOLUTION I'M USING
In RealPlayer/Preferences/Transport, I selected to use HTTP transport exclusively.
Here's where to find details of that solution in RealPlayer's OnLine Help:
In RealPlayer's Help menu, choose RealPlayer Online Help. Scroll down the left side of RealPlayer's help window to find the section Troubleshooting -> Network/Connectivity -> Wireless Issues.
CREDIT FOR PUBLICISING THE "WORK AROUND" SOLUTION IN APPLE DISCUSSIONS
I found the aforementioned "work around" solution in a posting in this forum by Greg Robbins on Sep 2, 2005.
The topic in which I found that posting has been archived - replies are not allowed.
I am posting this topic to clarify the deficiency in Airport Extreme, and to help keep this solution available for the Mac community.
G4 iMac Mac OS X (10.3.9)
G4 iMac Mac OS X (10.3.9)

I should not have started this thread as a "question".
The initial posting presents a problem together with a "work around" solution.

IMessage on iMac not reliably receiving photos

iMessage on iMac not reliably receiving photos but my iPhone and iPad are-what's the fix for this?

Hi,
I've been with the same problem for a couple of days, until finally today Messages simply stopped showing even a the window, so absolute inability to use it.
Considering that reinstalling the operating system is NOT a solution, I searched for something myself.
Pictures are controlled by xpcd, imagent and Messages, and it seems that when the problem arises is because they're using the wrong Apple server.
While this may be solved by Apple in a update (I hope so), in the meantime you can do a workaround (it worked for me on two different machines, and even days old images appeared).
In your Library, there is a folder called Preferences (that is /Users/<your_username>/Library/Preferences). There you should delete com.apple.imagent.plist com.apple.imservice.iMessage.plist and com.apple.imessage.bag.plist, with Messages CLOSED. Then reboot so Messages creates new ones. Also delete all file starting with com.apple.imagent, com.apple.imservice, com.apple.imessage and com.apple.iChat that end in .lock.
If even then it still is not working, deleting all files starting with com.apple.imagent, com.apple.imservice, com.apple.imessage and com.apple.iChat 100% for sure. But when you reboot you'll find you need to input again your login data for iMessage, FaceTime, Yahoo chat, AIM chat, Google Talk and Jabber (if you used them on Messages/iChat).
This is an annoyance, but less than a whole operating system reinstall or losing the functionality.
After all of this is done you should regain the ability to receive photos, send photos and drag&drop photos. Also if your Messages app only shows the menubar and no window at all, the same procedure solves it.
Regards,
Natalia Portillo
Claunia.com

JMS not reliable ?

After complaining to our JMS vendor about the fact that their JMS implementation was dropping messages, their response was that JMS is inherently not reliable . . . something about there not being a message ack (recipt?) or something.
What's up with that?

Hi,
It depends which type of queue you're using and what kind of acknowledgment you require. As you go more secure in your system by enabling persistent, acknowledgment, and etc. you're loosing some performance, but it is completely acceptable for your vendor if it is necessary. I mean adding features like persistence decrease your performance because of the additional overhead to the system, but if it's required, there is nothing else to do.
I did some investigations in comparing message migration between JMS and a somehow similar solution with JINI. JMS performed better in smaller demands and poorly in larger ones. The reason of such a thing was not because of JMS, but because of the performance/response time/flood handling of your application server or mostly your persistent storage. For example I used JBOSS which by default uses an in-memory database which is not good for production. For sure, you would not get a good performance, but it's not because of JMS.
If you explain your situations more, I think we can be more helpful.
Regards,

E2500 - Not Reliable

Pros: Nice to look at, fast ethernet speeds.
Cons: Wireless is not reliable at all. This could be a defective model but it is now 1 1/2 months after I purchased it and so I cannot rma it. I spent this time trying different things to see if it was anything other than the wireless router. My multiple wireless devices would connect, start surfing and then wifi would pause, and manytimes the router would dissappear from the devices list. I have not been able to keep any solid wifi connection with this router, even when the ethernet is working beautifully.
Other Thoughts: may be defective, other reviews not mentioning this.

E2500 is definitely one of the better routers that Linksys manufactures. Not only does it look good but it performs well also.
Your issue of intermittent wireless connection can be fixed by changing the wireless settings on the router like the wireless channel and some advanced wireless settings like the beacon interval, fragmentation threshold and RTS threshold. Also, there are many devices such as cordless phones, microwave ovens which work on the same frequency as that of the router i.e 2.4 Ghz. Try keeping these devices away from the router so that the signals do not interfere. Hopefully, this should make the wireless connection stable.
Also, you cannot RMA the device to the store, but you can RMA it to Linksys if the product is still under hardware warranty.

Scripts in /etc/profile.d seem not to work under certain circumstances

While already logged in, if I open up a terminal and run a script in /etc/profile.d/ to set environment variables, the changes don't seem to take. I can think of two examples:
1) Turning on KDE4 desktop integration in openoffice. I edited /etc/profile.d/openoffice.sh and changed OOO_FORCE_DESKTOP=KDE4, but when I ran the script I got an "export: command not found" error.
2) When replacing Sun Java with OpenJDK in order to compile and use 389-console from the AUR, I got caught up on one of the dependencies, ldapjdk (also from the AUR). The PKGBUILD for this package contains the following block of code:
which ant
if [ $? -eq 1 ]; then
. /etc/profile.d/apache-ant.sh
fi
ant dist
In theory this should work, as /etc/profile.d/apache-ant.sh contains the following two lines:
export ANT_HOME=/usr/share/java/apache-ant
export PATH=$PATH:$ANT_HOME/bin
However, upon running makepkg I got an error about "ant" not being in my path. To get around this I just edited the PKGBUILD and put the full path to ant, but this shouldn't have been necessary. The original PKGBUILD should have worked. I seem to have something out of whack and I don't quite know what. If anyone could be of assistance, it would be much appreciated.

I'm well aware of this. I never said that I started openoffice from the plasma menu. I never even started it. /etc/profile.d/openoffice.sh errored out without setting the environment variable in the current shell session. If it had worked, I would have been able to run openoffice from the terminal to test the new environment variable, which is what I was intending to do in the first place. There's no need to logout to test these sort of changes, they can be done from the terminal.
Your solution also doesn't address the problem I had in example #2, either. makepkg should be able to set environment variables in the current shell session, using the /etc/profile.d script detailed in the example. Running makepkg has nothing to do with my graphical session.
I know that logging out and back in will "fix" the problem, but that's not the point. The point is that a script which should be able to set an environment variable is not working properly.
Last edited by archtaku (2010-08-21 00:58:53)

Battery status not reliable

Hello there,
I got my rMBP mid 2014 two weeks ago and my battery status is not reliable. Please excuse my terrible language as English is not my first language. Back to my question. I am simultaneously using the "battery health" app from the AppStore. Both display similar battery stats when I first got it they were identical and I am confused. The built in stat says that my MBP is fully charged but "battery health" says that it's at 96%. And the battery capacity was at 107% and dropped to 100%. Should I be worried or is everything alright?
Thank you for your answers in advance
Yours sincerely batuu

Don't rely solely on the stats produced by a third party app.
You can take the computer to the Apple store to have it checked out.
Best.

Scripting on SAPGUI 6.4 is not reliable

Similar Messages

Maybe you are looking for