Scrollable content (pan option) with hyperlink doesn't work

Hello, I'm trying to layout a page to scroll horizontaly with an hyperlink to a web site. I've followed the steps given in the digitalpubsuite_help.pdf (Page 51 - Last updated 1/25/2012).
After grouping the image and the hyperlink, I cut it and I paste it into my container frame, but it's there when my container frame doesn't show me the Pan option in the folio builder (it's desactivated) and it remains with the option Web Content active.
So, I tried to do the same thing, but using a button instead of an hyperlink, but it doesn't work either. And in this case I have the message 'content generation error: invalid URL for web content overlay' when I try to update my article.
Could somebody help me to figure out why this is happening? What am I doing wrong? Thank you

No, it takes this property (web content overlay) once I paste the content into the frame. I also noticed that when I group my image with the hyperlink all my group become an hyperlink. I've already reseted it as you say but it didn't work!!!!

Similar Messages

Archive Utility's option "save in" doesn't work

Archive Utility's option "save in" doesn't work in Finder. Even I use its .prefPane and set it there…
I only want all my archives created with Finder are saved on the Desktop…
What's wrong with Mac OS X?

I think I found it. It's look like a bug in Mac OS X…
Look at my screenshot. There should be "archive-into" instead of "archive-info" (like in "dearchive-into")?

Options pulldown menu doesn't work - nothing comes up

options pulldown menu doesn't work - nothing comes up, no matter how long I wait.

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Windows 8 - hyperlink doesn't work....how do I fix? I already tried PDF/A Never...still doesn't work.

Windows 8 - hyperlink doesn't work how do I fix? Already tried to PDF/A Never, still doesn't work.Collaboration & Commenting

What country are you in? Is YouTube legal there?

Cropping pictures with Viewer doesn't work.

Cropping pictures with Viewer doesn't work.
Selecting < or ~ 12 pictures. (picture size are Snapshots with iphone resolution) ->Viewers opens and display them. -> Russian roullette between cmd+k or the little crop button. No indication which one will process a crop or which not. -> Both result in picture selection disappear with no crop.
Selecting > 12 pictures. (picture size are Snapshots with iphone resolution) -> Viewer opens and display them. I crop them one by one with same Russian roulllette behavior between cmd+k or the little crop button. -> Closing Viewer. -> Pictures remain like they've been before. Not cropped.

I just tried what you described (although I can't really fathom why you would describe it as Russian roulette (with a variable number of L's). Unless you've been drinking a lot, which is what people are usually doing when they are playing Russian roulette. Your post was hard enough to decipher without that.
Anyway, my cropping was saved each time. I think there's something wrong with your Preview.app. Have you changed anything about the autosave functions of OSX?
I would try:
Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
if that doesn't help, then I'd reinstall Mavericks over your current installation.

Firefox command line option "-no-remote" doesn't work with profile.

I want to run the stripped version of firefox in background with one application and another full version of firefox for normal browsing. I have created the profile for the stripped version of firefox and loading the same using command firefox -P "stripped" -no-remote/firefox -no-remote -P "stripped". But when I start the full version of firefox by launcher "firefox" than it directly loads the stripped version even used the -no-remote option with profile. So I have created launcher for firefox and used the -no-remote with default profile like "firefox -no-remote". It works when first time I click on launcher but for second click it shows the message "Firefox instance is running, or not responding. close the firefox and restart the system". I have gone through the online available documents that suggests that use the -no-remote option with profile so the default profiles works correctly. But -no-remote option doesn't work with the profile. So is there any way to launch the full version of firefox by launcher on second click on launcher?

Yes, I used separate profiles only. But the -no-remote option doesn't work as mentioned http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile.
Please find below the command what I am using
firefox -P "stripped" -no-remote
firefox
If I use the above command than the new firefox window get the configuration from the stripped even if I have used the -no-remote.
I use the -no-remote with firefox default than it works for the first time.
I have created the launcher for firefox default. So if I click second time on launcher than it doesn't work.
firefox -P "stripped"
firefox -no-remote
(But doc on link -> http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile) says do not use the -no-remote with default.
Do you have any idea why this is happening?

Mailing with SMTP doesn't work anymore, 10.6.2

Hi all,
after reading so many posts regarding Mail and how sending emails doesn't work with 10.6.2, there still seems to be no solution that works for everyone.
After Updating to 10.6.2 I cannot send emails through ANY smtp server.
I also have a windows 7 machine running thunderbird and everything works there.
I tried all suggested solutions,i.e.
1.) I checked connection doctor and everything seems to be fine (including the detailed messages)
2.) I tried all sort of settings, with, w/o SSL, all sorts of ports
3.) I "reset" the keychain
4.) I "reset" Mail preferences by deleting com.apple.mail.plist in library\preferences
still, I can only receive emals but not send. any solutions are greatly appreciated, thank you in advance!

Hi - here is a bizarre solution (possible bug); I hadn't been able to ever send any with my 3 month old MacBookPro through Apple Mail 4.2, similar to what you say. That was under 10.6, 10.6.1 and 10.6.2. I was using my Win PC to send emails, or via Web clients in Safari off the MacBookPro, but finally I reached the time to call Orange UK, my ISP...
I have just had a great experience with their technical support, but the solution reached was NOT logical - let me explain it, perhaps it might work for you.
The logical background is this:
Define an SMTP server; if you have Orange broadband, you HAVE to use theirs (as they block other servers form using the standard ports 25, 465 and 587 - apparently for SPAM reasons, or perhaps they are now required to keep an eye on everything... who knows.
So, in Apple Mail 4.2; we went to the menus, and Mail -> Preferences
highlight any account on the left, and at the bottom of the right hand pane, in the Account Information tab, click and define the SMTP server (click the box, choose Edit server, create an SMTP server - for Orange UK, I had to put in
smtp.orangehome.co.uk
then ensure this is the only SMTP server Apple Mail uses, by checking the box in Account Information tab, Use only this server.
Go back into Advanced tab, and here is where the logic starts to end...
To recap: Mail -> Preferences -> Click on the Orange SMTP server button -> click "Edit SMTP server list..." (again) and go to the Advanced tab.
In this tab are two main choices:
Use Default Ports (25,465,587)
Use Custom Port (by default this is a completely blank box)
Now, logic dictates that you would leave the 'use default ports' option checked, then try all other manner of parameter changes. But, we tried forcing 25 into Use Custom Port.
Use Custom Port - 25
but this too didn't work.
Then I tried, for fun:
Use Custom Port - 587 (no SSL checked, and Authentication - none; again illogical as 587 should be an SSL port, as is 465)
And... suddenly my mail sent, for the first time ever!
mmm... When I looked again at this tab, though, the Use Custom Port box had reverted to saying...
Use Custom Port - 25 (???) but who cares, it worked. Why it didn't work the first time, I have no clue.
NB Between each try, I quit Apple Mail, deleted my test Outbox sending messages, and essentially made sure nothing was trying to be sent. This was between each 'attempt'. This might have been an important thing to do, but I don't know.
So, my best guess is to just try forcing the Custom Port to be 25, then 587... and keep trying. My emails still take about 5-10 secs to send, rather than almost immediately like they used to before I started with Orange Broadband (which I am, interestingly, finding to be a faster service than my previous ISP, and as yet, appears just as reliable...) It’s all so Weird! It’s the only thing that has really annoyed me with this my first Mac, so that’s good going!
Good luck!

Calculate Results As Average of Detailed Values That Are Not Zero... with hiearchies doesn't work

Hi all,
For the key figures, the option of "Calculate Results As Average of Detailed Values That Are Not Zero, Null, or Error" works fine for characteristics drilldown without hierarchies, but with hierarchies it simply doesn't work; instead of calculate the overall result as average, the system calculates it as SUM. It works like the option "Nothing Defined" where the results provided by the analytic engine are displayed. No local calculation takes place.
How can I do to display the overall result of hierarchical drilldown of a characteristic as an average?
Many thanks in advance!
Abraham

It is usually best to just keep it as simple as possible. What do you think the code in the OR Array Elements does? I imagine it is just a simple FOR loop with a variable to keep the latest OR. So I would do what GerdW just showed with the FOR loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Option System recovery doesn't work

Notebook Lenovo G50-30 (80G0) - bought a month ago. (Windows 8.1)
Few days ago sound stopped work suddenly. I suspect that this is associated with MS Updates, which was set as automatic. I suspect because this notebook is not my. But now I have it for repair. I noticed that system work abnormally, when I try to use some function from control panel it doesn't work and control panel stop responding. For example update settings.
I decided restore system to factory setting, using NOVO key and option System Recovery. Unfortunately when I choose this option nothing happens and computer loading operating system as usually. I try use software OneKeyRecovery and after it sytuation is the same.
Important information is that system partition C was divided into two parts/partitions. And it was my first clue that something is wrong with ID partitions, but maybe i'm wrong. I change it and set one C volume.
Diskpart shows 5 volumes (0-4), the last one is the recovery partition like below:
On computer: LENOVO-G50
Volume ### Ltr Label Fs Type Size Status Info
Volume 0 E DVD-ROM 0 B No Media
Volume 1 C Windows8_OS NTFS Partition 450 GB Healthy Boot
Volume 2 WINRE_DRV NTFS Partition 1000 MB Healthy Hidden
Volume 3 SYSTEM_DRV FAT32 Partition 260 MB Healthy System
Volume 4 PBR_DRV NTFS Partition 13 GB Healthy Hidden
Partition 5
Type : de94bba4-06d1-4d40-a16a-bfd50179d6ac
Hidden : Yes
Required: Yes
Attrib : 0X8000000000000001
Offset in Bytes: 486004490240
Volume ### Ltr Label Fs Type Size Status Info
* Volume 4 PBR_DRV NTFS Partition 13 GB Healthy Hidden
Can someone help me? How can I restore factory settings?

hi mehowg,
Can you try to create a recovery drive and use it to Refresh or Reset Windows 8/8.1.
If that doesn't work, you can try the folliwing to reinstall the OS:
1. Check this guide on how to obtain a Windows 8.1 ISO (see Option One)
2. After you set Boot Mode to UEFI in the BIOS, follow this guide to make a bootable UEFI Win8.1 installer via DVD/USB flashdrive and use it to install Windows 8.1 on the G50-30 (the installation should be able to detect the Windows 8.1 product key in the UEFI firmware that will let you activate Windows).
Note:
The above method (Steps 1-2) will only re-install Windows (you will need to reinstal the drivers manually from the G50-30 drivers page)
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Printing PDDoc with AFExecuteThisScript() doesn't work after an upgrade from SDK 5 to SDK8

Hello,
I have made an upgrade of my plug-in which was developed with the Acrobat 5 SDK. I upgrade it to Acrobat 8 SDK and my print function doesn't work anymore.
Actually I print my document using a javascript trusted function instead the function provided by the C++ library for internal reason.
Here below is the code used to print my document :
char szJavaPrint[6000];
sprintf(szJavaPrint,
"pp = this.getPrintParams(); \r\n"
// fill pp with parameters
"pp.interactive = pp.constants.interactionLevel.silent; \r\n"
"\r\n"
"this.trustedPrint(this, pp);"
PDDoc pdDoc = AVDocGetPDDoc(avDoc);
AFExecuteThisScript(pdDoc, szJavaPrint, NULL);
It was working with the Acrobat 5 SDK but the print seems to have no effect using the Acrobat 8 SDK. I know that there is a change between Acrobat 5 and 8 concerning the Character Set (currently I set the Character Set to "Not Set" in the Configuration Properties of the project) but I don't think that my problem comes from the Character Set.
All ideas to resolve this problem are welcome.
Kind regards,
Joe

See what happens if you remove the "setting of interactive to silent"...
There is a restriction on silent printing in Acrobat, but I would not have expected that to be passed into this method - but it could have been overlooked and be a bug.
Also, I don't recall a trustedPrint() method in Acrobat JS - check the documentation for the correct name of this function...

I´d like to export my iphotos macbook pro.everything worked right when I installed impression for iphoto but when I installed impression 2 for iphoto and I restared my computer the export option in iphoto doesn´t work.Can somebody please help me ?

I´d like to export my iphotos "macbook pro". Everything worked fine when I installed impression for iphoto but when I installed impression 2 now I can´t export my photos. I´ve restarted the computer but still it doesn´t work.
Please can sombody help me with that?
Thank you

Are you running Snow Leopard or Lion? Your info says Snow Leopard. If it's lion then:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Then you can locate the folders mentioned.

After upgrade to IOS 8.3 sync with iTunes doesn't work

After upgrade iPhone 6, iPad Air to IOS 8.3, the sync (over wifi, as well) to iTunes doesn't work anymore.
On iMAC iTunes, the last sync's hour and day appear different from what is recorded on mobile devices (iPhone and iPad); with IOS 8.2 and the previous iTunes' version the sync worked correctly: the dates are the same only for few seconds after syncronization, then the IOS devices show the syncronization's dates related to two weeks ago.
Thanks

you'll need to contact your carrier.

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

Synchronization of tasks and interaction logs with Outlook doesn't work

Dear SAP Experts,
I'm workink on CRM 7.0 (release 7.7.06.010).
We are trying to make the synchronization of activities, contacts and tasks from our CRM system to Microsoft Outlook.
It's working fine for the contacts and for the Apointment BP visit (transaction type Y020).
But no synchronization made for others activities (interaction log Y007 and telephone calls PCAL) or BP Tasks (Y030) we created in the system.
We just applied today SAP Note 1415263 and Groupware Integration 3.057.
I made the settings in the CRM Calendar tab in Outlook (with synchronization from CRM to Outlook), and checked apointment, contacts and tasks.
In customizing (CRM > Transactions > Basic settings > Define transaction types), I flagged for the following transaction types the little 'Calendar' box: Y020, Y030, Y007 and PCAL.
In another entry (CRM > CRM Middleware and related components > Settings for client-based synchronization), I indicated the transaction type Y020 for DEFAULT_APPT_PROC_TYPE and Y030 for DEFAULT_TASK_PROC_TYPE.
Any idea about what is missing or not already done?
Any help will be apppreciated.
Thanks in advance for your help,
Kind regards,
Grégory KREMSER
Edited by: Grégory Kremser on Feb 3, 2010 3:13 PM

We don't have a CAS array set up. We want the fail over to be fully manual and only fail over to another server when mb1 is in a completely failed state and won't be back up and running withing a set time frame. We can get everything working
on MB3 and only Outlook doesn't work when everything is on MB2. Outlook also doesn't work if databases are on another server and DNS is pointing Outlook to MB2 (again MB3 works fine).

Why does search option in history doesn't work? It does not display any sites I've been to.

I enter history, type a name of a site I've been to in 'search' or 'find' field (I'm using polish version so I don't know the exact name of that field) and it does not find anything. I haven't cleared my history, it's all there when I open 'today', 'yesterday' etc. tabs. Only finding it using search option doesn't work.
It used to work fine now it doesn't. I haven't installed anything.

Make sure that you're not running Firefox in Private Browsing mode.
https://support.mozilla.com/kb/Private+Browsing
You enter Private Browsing mode if you select:
Tools > Options > Privacy > History: Firefox will: "Never Remember History"
To see all History and Cookie settings, choose:
Tools > Options > Privacy
choose the setting Firefox will: Use custom settings for history. Deselect:
[ ] "Permanent Private Browsing mode"

Scrollable content (pan option) with hyperlink doesn't work

Similar Messages

Maybe you are looking for