SCSM - Amending new field in authoring tool

Hi,
I have added a new field to the change template in the authoring tool, it looks good in the authoring tool but is moving it to the richt when I have imported it, you can see this in the screen shot below. The two new fileds, one called 'Will this change
affect our IT recovery poition' has moved over to the right.
I guess it is comething to do with the details settings for these fields, any advice on how these should be set woul dbe appreicated.
tamrep

Hi,
SCSM Authoring tool is a magic instrument for forms customization :).
Add your controls to StackPanel508 and StackPanel509 instead Grid. Use the margin, width, alignment to position the controls within the CR form.
Cheers,
Marat
Site: www.scutils.com
Twitter: LinkedIn:
Facebook:

Similar Messages

SCSM Authoring Tool verification error when creating a new property

I am needing to add several new fields to an existing customized ServiceRequest Extended Form. Using SCSM I exported the management pack (as a bundle) and then used PowerShell to export to a .xml. Now when I open the class and try
to create a new property I get an error stating:
The management pack could not be verified due to this error:
Verification failed with 1 errors:
Error 1:
Found error in ...servicerequestextendedform.category with message:
The Target attribute value is not valid. Element ....ServiceRequestExtendedForm.Category references a Target element that cannot be found.
I am very new to this. Any help would be greatly appreciated!

you probably want to go back to original sources, rather then exporting from Service Manager, since the export will break any sealing and might cause issues when authoring or resealing.
You'll also need :
a Sealed version of the class extension, since this is going to need to be loaded into the authoring tool before you see the extra properties,
an unsealed copy of the MP that contains the form customization, so you can edit it
the original key used to seal the current customization, so you can seal the upgraded form using the same key so it will upgrade the MP correctly in your production environment.
The specific error you're running into looks like a MP reference error, but it's hard to be sure without seeing the original XML. i'd make sure that you have opened the sealed versions of any other MPs this MP depends upon.

SAP CRM 7.0 - Interactive reporting tool enhancing reports with new fields

Hi Everyone,
I am a BW Professional, currently working on evaluating the true benefits of implementing Interactive Reporting tool for our company. As I understand the Interactive reporting tool restricts us to report on individual reporting areas like Activities, Leads, Opportunties etc.
But according to our business it is very important for us to be able to report on cross reporting areas real time i.e. activities & leads together or activties, leads & opportunties together etc.
I learned about the enhancement work bench in interactive reporting tool where we can add SAP fields to individual reporting areas, so I thought of adding leads & opportunties to activities. This is where the fun part starts.
Here I learned that all activty ID, Lead ID and Oppo ID are all fed from one single field from SAP CRM i.e. OBJECT_ID, which means the system is dividing this data into individual reporting areas based on type of data i.e. leads or oppor's etc. and may be based on some key like account etc. So here is a technical question, for me to add a new field to a reporting area I have to give a field name but we already have OBJECT_ID from where I am pulling activties data, so if I want to include leads also in activties then I will have to add some logic manually to get that and can't use enhancement workbench because it is for missing fields from SAP CRM whereas in my case I already have OBJECT_ID from where I am getting Activity data.
Sorry if I am driving you guys crazy but I am just trying to think loud to make myself clear with concepts.
Also I have seen that a reporting area in Interactive reporting tool is based on a BW query, but I am not sure why not all the fields in BW query are available for reporting in Interactive reporting tool?
Any help or commets will be greatly appreciated.
Thanks & Regards,
SRV

Hello,
checking with the config wizard is always a good idea since it's the only supported way to configure this scenario
The secret is that you apparently did not activate the report areas. It is a bit missleading that the queries are checked before the report areas are checked, therefore you see the errors concerning the queries first. Below those errors you should find some lines like
    Report areas: delivered 15, active <?>
    CRM interactive reports: delivered 20, active <?>
    Activation of report areas checked
The last line offers some documentation and the actual link to activate the report areas.
Best regards

New authoring tools available (Sept 1)

The v15 Folio Producer tools are now available here:
http://www.adobe.com/support/downloads/product.jsp?product=172&platform=Macintosh
http://www.adobe.com/support/downloads/product.jsp?product=172&platform=Windows
If you install these authoring tools, the folios you publish are compatible with the current Adobe Content Viewer available on your iPad, Android, and PlayBook devices. However, if you created a custom viewer app using an earlier set of tools and don't want to submit a new version to the store, you don't need to update your authoring tools.
If you install the newest version of the Adobe Content Viewer on an Android device, you can use the new Preview on Device feature. The updated Android viewer is available here (or you can search for it in Market):
https://market.android.com/details?id=air.com.adobe.contentviewer
The Preview on Device feature is not yet available for the iPad. When using the Preview on Device with the Android viewer, make sure that you have the newest viewer, that you turn on USB Debugging on your device, that you install the required device drivers to transfer files from your computer to your mobile device (Windows only), and that you start Adobe Content Viewer on your attached device when you open the Preview menu in your Folio Builder panel. See Use Preview on Device for details.
The updated version of the Viewer Builder is not yet available. It is scheduled for release next week.
See What's new in this release for details. However, note that the new Viewer Builder features mentioned are not yet available.

Hello Bob, i welcome myself in public forums. I'm quite desperate now. Finaly we are able to use full DPS, so we start to upgrade our tools from Drop 10 to current tools (so i'm on CS 5). Unfortunately even after many tries (http://kb2.adobe.com/cps/916/cpsid_91689.html) i'm still stuck with error of folio builder requesting upgrade.
BTW because of quite non-helping names of .dmg i'm even not sure that i'm downloading REALLY the newest tools, because name is just AdobeDigitalPublishingPatch-All and files on this dmg are from 25th of August. Here is screenshot from installation of this update:
Any idea what to do? And no, reinstall CS 5 is not the answer, it's late evening here and i don't have access to medium and serial number in IT section.
And please can you improve informations about what version belongs to which "Drop" (and which viewer is supported by this version), and can you improve naming of downloads so it's crystal clear what is what?
Thank you.

SCSM 2012 R2 Authoring Tool Setup Error "An error occured while executing a custom action:_RegMainEditorPackage"

Screenshot:
Setup Log:
Property(S): ProductToBeRegistered = 1
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 1708
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 2205 2: 3: Error
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1708
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 2205 2: 3: Error
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (8C:BC) [10:55:05:914]: Product: Microsoft System Center 2012 R2 Service Manager Authoring Tool -- Installation failed.
MSI (s) (8C:BC) [10:55:05:914]: Windows Installer installed the product. Product Name: Microsoft System Center 2012 R2 Service Manager Authoring Tool. Product Version: 7.5.3079.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation
success or error status: 1603.
MSI (s) (8C:BC) [10:55:05:918]: Deferring clean up of packages/files, if any exist
MSI (s) (8C:BC) [10:55:05:918]: MainEngineThread is returning 1603
MSI (s) (8C:78) [10:55:05:920]: RESTART MANAGER: Session closed.
MSI (s) (8C:78) [10:55:05:920]: No System Restore sequence number for this installation.
=== Logging stopped: 2/27/2014 10:55:05 ===
MSI (s) (8C:78) [10:55:05:921]: User policy value 'DisableRollback' is 0
MSI (s) (8C:78) [10:55:05:921]: Machine policy value 'DisableRollback' is 0
MSI (s) (8C:78) [10:55:05:921]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (8C:78) [10:55:05:921]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:78) [10:55:05:921]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:78) [10:55:05:922]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (8C:78) [10:55:05:922]: Restoring environment variables
MSI (s) (8C:78) [10:55:05:922]: Destroying RemoteAPI object.
MSI (s) (8C:9C) [10:55:05:922]: Custom Action Manager thread ending.
MSI (c) (E4:DC) [10:55:05:923]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E4:DC) [10:55:05:924]: MainEngineThread is returning 1603
=== Verbose logging stopped: 2/27/2014 10:55:05 ===
I am trying to install on Windows 7 Ent. and Windows 2012 (both attempts fail with same error).
The VS 2008 shell piece was installed, however, as others have experienced the prereq check issue, I removed it from the input file in the setup folder, which resolved that piece.
Any suggestions?
Thank you.
Regards, Zoeb Khan

When installing the VS Isolated Shell, make sure the actual binaries (found on the root drive or where you extract the web installer) are installed. This will resolve the above error and also the Prerequisite issue that a lot of people are coming across.
Regards, Zoeb Khan

Service Manager Authoring Tool 2012 SP1 Missing DLL's

Hello All,
Originally posed this to the MS partner forums and was asked to post here.
I'm hoping someone familiar with the Authoring Tool For service Manager can help me. I'm using the Service Manager Authoring Tool 2012 SP1 found at the link below. I believe this to be the latest available.
Although the splash screen says Service Pack 1 Beta? Hoping the dev forgot to update the splash screen.
http://www.microsoft.com/en-us/download/details.aspx?id=36214
I'm trying to create a new custom Service Request form and am getting prompted for some DLL's that seem to be workstation related or at least the Aerolite.dll makes me thing Windows Aero. (Could be wrong)
I've successful created a new Management pack, and I created a new Class that inherits the properties of the Service Request Class. I've added all the properties I need for the new form. All is well no issues there.
The next step is to create a new custom form. I select the create new custom form. Give it a simple name, and select my assembly then the form type. I'm then prompted for several DLL files that are not on my system
and I'm not sure where to find them.
The DLL's are:
Microsoft.EnterpriseManagement.UI.ExtendedControls.Aerolite.dll
WPFTToolkit.AeroLite.dll
I can select cancel several times to get ride of the prompt for the DLL's and can customize the from without issues. I don't think this is correct but I have been able to create the form.
Does anyone know where I can find the above DLLs? Am I doing something incorrect here? Is this a bug in the authoring tool? If so is there an updated version I should be using?
I also receive the same prompt for DLLs when attempting to create a custom incident form....
My test environment is running Server 2012 R2 with Service Manager 2012 SP1. Went ahead and tried this using the Service Manager 2012 SP1 Eval VHD and had the same issue...

Hello Gabe,
The following post provides some insight on the Aero DLL's.
Hi Matt,
The Aero dll is only available on Vista so the tool will not find it when running on a different OS (e.g. Server 2008). However, you can safely cancel out of that it does not affect the form.
Regarding moving controls between tabs, unfortunately that's not supported this release.
It sounds like you did everything right, so let us try your MP here and see if we can reproduce the crash you are seeing and investigate it.
Thanks,
Cori
Another post regarding 'Beta' on the splash screen.
Yes, someone forget to change the splash screen :)
Rob Ford scsmnz.net
Cireson www.cireson.com
For a free SCSM 2012 Notify Analyst app click here
Can't post links to the full posts as this is a new account but I am sure you can find the referenced articles here on TechNet with the help of Bing or Google.
Hope this helps.
~Nick

I've created a fillable PDF document in XI Pro. I need to change the body of the document and create a new fillable PDF document. When I do that it won't let me create a new PDF. It keeps saying "no new fields recognized. What can I do to redo my documen

I've created a fillable PDF document in XI Pro. I need to change the body of the document and create a new fillable PDF document. When I do that it won't let me create a new PDF. It keeps saying "no new fields recognized. What can I do to redo my document with the changes in the text, but no changes in the fillable fields?

You start with a source / authoring file for the "static" content (e.g., Name, Last:). Say this is an MS Word file.
You master the "static" content..
You keep this authoring file and have a backup of this file.
You output a PDF and use Acrobat to build and fine tune the "form" (form = the form fields, not the "static" content).
The authoring file and output PDF (with form fields) gives you "rev 00".
Now, you must change something in the "static" content.
Open the authoring file and save as to a new version (e.g., "wordfile_v00" becomes "wordfile_v01).
Output this to "pdffile_v01".
Use Acrobat to open the PDF form file "pdffile_v00". Save As to a new file name ("pdffile_v00update").
Using Acrobat XI Pro the click-path Tools - Pages - Replace lets you replace a page or pages of "pdffile_v00update" with a page or pages from "pdffile_v01".
This replaces the "static" PDF page content and does not affect the form fields on the page.
(you may have to adjust position of form fields)
Save "pdffile_v00update" to "pdffile_v01" to reflect the revised status of the PDF form file.
Be well...

How to delete a customization from a form - To import a managemt pack from the Authoring Tool

I am having issues importing a management pack created in the authoring tool. How do I delete a customization from a form since only one can be present? Is there documentation on this?

If the MP defining the first custom form doesn't contain anything else you need (such as class extensions) delete the first MP. If it contains other stuff you need, delete the form from the Authoring Tool, increase the version the by 1, seal and import.
Then import your 2nd MP containing your new form.
Rob Ford scsmnz.net
Cireson www.cireson.com
For a free SCSM 2012 Notify Analyst app click
here

Create New Field - Package is null and non editable

7.0 when choosing the Create New Field in the UI, I get a window where the Package is empty and I can not edit it, the Namespace contains a Z and is not editable.
I select ORDERADM_I but when I select OK I get the message the Package is Required.
I am guessing I need to do something in EEWB? but not quite sure. I did find any other forum questions with this issue.

Hi,
I assumed you are using Application Enhancement Tool.
The prerequesite to use Application Enhancement Tool is you have to maintain the system settings in transaction AXTSYS.
Here you can define a default value, which will be displayed in WebUI.
Regards,
Steve

Help Authoring Tool Options & Enhancements

I have been using RoboHelp x5 since 2005. For this year's
budget meeting I have to provide options/cost comparison on other
tools that are available. One thing that is of crucial importance
is that my background is not in computer/technical (no can do code,
scripting, etc), which is why RoboHelp was chosen in the first
place.
1) Can anyone offer an "addon products" to use with RoboHelp
(i.e. to enhance search function, etc)
2) Can anyone offer any advice (pros and/or cons) about any
of the following Help Author Tools?
• AuthorIT
• Doc-To-Help
• chm2web
• FAR
• Help & Manual
• Help Generator
• HelpConsole 2008
• HelpNDoc
• HelpServer
• HelpStudio
• HelpTron
• HyperText Studio
• Macrobject Word-2-CHM
• Macrobject Word-2-Web
• MadCap Flare
• Mif2Go
• WinCHM
Any assistance will be MUCH appreciated!
Cindi

Hi, Cindi,
If you're an experienced RoboHelp user and happy with the
output that you're getting with it then I would question the
benefit of switching to another help authoring tool. This may be
necessary in some circumstances —- for example, if you need
to output your help content in a format that RoboHelp does not
support, such as Microsoft Help 2.0 -— but for the most part
the time and effort required to learn the new tool and convert your
existing content for use with it will outweigh the benefits of
switching to it.
Here are a few notes on the tools you listed.
> chm2web
> Help Generator
> HelpConsole 2008
> HelpNDoc
> HelpServer
> HelpTron
> Macrobject Word-2-CHM
> Macrobject Word-2-Web
> WinCHM
I see little or no mention of these tools in any of the
Help-related forums that I frequent. This isn't necessarily a bad
thing, of course, but I believe it indicates that few professional
help authors are using them. I'd expect the cheaper of these tools
to provide few or no editing facilities, and in some cases they may
be designed to perform a single, very specific function, such as
compiling a set of existing HTML files into a .chm file.
> FAR
This is an excellent tool for performing search-and-replace
operations across a set of HTML files and compiling them into a
.chm file or Help 2.0 file. It provides no facilities for creating
and maintaining your topic content, however, so you should really
only view it as a potentially useful add-on to RoboHelp.
> Mif2Go
This is like WebWorks Publisher (not on your list): an
application that takes source content authored with Adobe
FrameMaker and converts it into a number of different help formats.
If you've already authored a lot of content with RoboHelp then
moving it into FrameMaker and setting up the Mif2Go or WebWorks
templates appropriately could be a big undertaking.
> HyperText Studio
This was up-and-coming five or ten years ago but, for
whatever reason, it seems to have dropped completely from view
(though I'm aware that it is still for sale).
> HelpStudio
This is a quite heavy-duty application that appears to be
more popular with software developers than with full-time help
authors. A "lite" version is now being given away with Visual
Studio.
> AuthorIT
> Doc-To-Help
> Help & Manual
> MadCap Flare
These are all significant players. I've used AuthorIT only
and, while it's certainly a powerful tool, the learning curve is
quite steep.
You can read detailed reviews of many of these applications
at the Writers UA site (
http://www.writersua.com).
Pete

How to add a new Field to the WEB User Interface in CRM 2007

Dear experts,
I have been struggling to add a new field to the (CRM 2007) user interface from available fields for a specific view.
I have maintained settings in BS__WD_CMPWBàRuntime Repository editoràComponentàViewàConfigurationàNew ConfigurationàAvailable FieldsàField Propertiesàand save.
But the field is only appearing in display mode in the Web UI, which doesnu2019t allows any user input.
I need your help to resolve the issue, I would be grateful if you could provide step-by-step documentation with screenshots or any other kind of documentation.
Each suggestion will be appreciated.
Best regards,
Raghu ram.

Hi Raghu Ram,
I think you added a new custom field using some method like EEWB etc.,
Then, you are adding the field onto the UI using UI Configuration Tool .. right ?
These are the steps to diagnose:
Method 1.Check the field properties in the model browser first.
It should be showing 'C' i.e., CHANGEABLE. If it is showing as 'R', it is only READABLE.
In such a case you need to find a BADI to change the field properties.
For example, in Marketing Applications OBJ BADI has a method CHANGE FIELD PROPERTIES for this purpose.
Method 2. Debug and check what is the value coming for RV_DISABLED parameter in the GET_I method in BSP_WD_CMPWB. This should be FALSE.
Method 3. Check what are the field properties in the UI Configuration tool.
Make sure it is not a display only field.
Regards,
Masood Imrani S.

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

Process to add new field to Account screen and update value from R/3...

We have CRM 7 and just wanted to ask what the process would be to add a new field to the Accounts screen. This field will be a read-only field and we'll source its value from R/3, based on some of the other data entered into the Accounts screen.
What exactly is involved in this process?.
I think I can use the new Application Enhancement Tool instead of EEWB to create the new field, but how does one identify which structure/table to change for say the 'Accounts' data, and, where does one place the code which populates this field, and, once the structure has been changed how do I physically add the field to the screen. I should be okay with reaching out to R/3 and populating the data, code-wise, but again wondered if there was anything inbuilt to do this, bearing in mind the closeness and constant access to R/3 from CRM.
Any help would be much appreciated.
Jason
Edited by: Jason Stratham on Apr 14, 2010 1:11 PM

Jason,
If you use EEWB or AET,, there is nothing manual you have to do, the fields will be added to all related tables and structures plus UI too.
May be sometimes you have to run the UI configration tool to add the field to the UI, again this is just a tool, there is not manual coding required.
you can enter the value for the fields direclty via UI, BUT if it is a display only field, at the time of save, you have to write couple of line to populate this field ( see set_property( ) method in the context node ).
Thats it...
Regards, Sudeep..

How to create new field while upgrading from CRM 4.0 to 7.0

Hi ,
How do we create new field on UI and store data into existing field in database?
Is there any option in AET to skip the creation of new field in the database table ?
Custom field is already created in GUI and database table while using CRM 4.0
Now, after upgrading to 7.0 EHP3 , I need to bring this field on the UI .
Using AET may create new field again in the database table.Please suggest.
New filed needed to be created in Marketing Campaign Element Header data.
Thanks
Jayasri

Hi Jayasri,
As a custom fields are already there in crm 4.0. You don't need to use AET again to add field.
These enhancements still exist after the upgrade. Dependent on the enhancement object and type some manual steps are necessary.
For example regarding a single field enhancement for the BP the whole framework is enhanced after the upgrade. There is only one manual step to bring the field on the relevant view(s) via the UI Configuration Tool. For whole BP tables some more manual steps are necessary, these steps are described in the note 1069791 - CRM WebClient UI for EEW enhancements (reference to more notes regarding the EEW after the upgrade).
For set types, we need to generate UI With the help of the UI configuration tool the settypes could become visible in the Web UI.
I didn't understood your scenario, can add little more information why you want to add field by AET if available in DB?
Refer
FAQ - SAP CRM Upgrade from release 4.0 to 7.0
Regards,
Arjun

Adding new fields to assignment block, what are the steps to do this.

CRM 7.
Could someone tell me what the steps are to add new fields to specifdic assignment block. Assume that these fields do not already exist in any given structure/table.
My understanding is that I need to use transaction EEWB and then somehow use the component "BSP_DLC_FS" and view "factsheet". But having never used EEWB before I'ma tad lost. I'm in EEWB and have crfeated a project and believe that I now need to create an extension. When doing this I am displayed a box with 4 fields, being: Name, Description, EEW Bus object and Extension type. What are my next steps?
I assume that the EEW bus object is 'BUPA' and the extension type is 'ADD_NEW_FIELDS'. However, how do I know for sure that the EEW bus object should be 'BUPA', bearing in mind that I'm adding new fields to the Account (BP) main address communication data Assignemnt block?.
I wondered if anyone has a link to any guide docuemnt about how to do this?.
Any help would be very much appreciated.
I attempted to use EEWB to add new fields to BUPA but am hitting the error: BDT-DC is Not Prepared for This Application Object
On searching I can see that there are ways around this, via SM30 against table/view V_TBZ1_DC, changing the BDT BC settings, whatever they are. But it gives me a warning when this happens and mentions that only SAP are allowed to do this, but it will allow me to create a transport if I press on past this. Should I need to make this change though, or have I just done something wrong within EEWB I wonder.
Jason

Hi Jason,
You can try using Application Enhancement Tool (AET) to create new fields instead of EEWB,
Best Regards,
Gobinda

SCSM - Amending new field in authoring tool

Similar Messages

Maybe you are looking for