SD: Need to cancel Goods Issue for Outbound delivery cancellation via VL09
Hello.
User have have canceled the GI for OBD via VL09. But the date of cancelation is 09.11.2010 though it should be 29.10.2010 (as it was in the initial document).
Is there any possibility to cancel this cancellation?
Best regards.
hi
once PGR happend basing on the document date we cannot reverse on the same. functionally it is not possible because the entry has been registered/credited wirh COGS.
hope this helps
regards
balajia
Edited by: balaji timmampalli achari on Nov 14, 2010 2:43 AM
Similar Messages
-
Automatic goods issue for outbound delivery, during the transfer order confirmation
Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.Hi Iiya
Check the below setting, might be helpful -
Goods issue for outbound delivery
Any example on how to simulate vl06g (goods issue for otubound delivery)?
I'm trying it with BAPI_GOODSMVT_CREATE...
Thnks.Hi Lopez,
Post Goods Issue with MB_CREATE_GOODS_MOVEMENT FM in VL02N
Regards,
Sravanthi -
Post goods issue for outbound delivery in previous month
Hi experts,
Pls help. Many thx.
Due to roll out, some stock need to be issued in previous month. It works fine except some deliveries. Those deliveries have been cancelled goods issue due to wrong posting date.
For e.g. the posting date in delivery should be April 1. Due to oversight, the date is entered as May 27. In VL09, the reverse date should be in May. Otherwise, the system disallows further.
Now, the problem comes up. When doing those deliveries again (even create new deliveries), the error message pops up "Deficit of SL Unrestr. prev. 350 KG : XX material XX plant XX storage location
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 350 KG.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing."Hi Lakshmipathy,
I tried the same as you said but its throwing the error below:
GI for delivery 80014996 cannot be canceled for the following reasons:
Cancellation date 30.04.2009 is before the goods issue date 28.05.2009.
I don't have the any issues but i tried whether its working or not.
Kindly suggest...
Regards,
SK -
Post Goods Issue for Outbound delivery return
Hi, I'm trying to Post a Goods Issue for a returned outbound delivery but I cannot find a function module to do this, I tried using SD_DELIVERY_UPDATE_PICKING but its creating the material against the outbound delivery with status archived, which means it wasn't created.
I also tried using the MB_CREATE_GOODS_MOVEMENT, but this one is creating the material document but not updating the status and the document flow of the delivery.
Thanks,
PabloHi Lopez,
Post Goods Issue with MB_CREATE_GOODS_MOVEMENT FM in VL02N
Regards,
Sravanthi -
Automatic goods issue for outbound delivery without picking/packing
Hi,
I have the following flow: sales order -> outbound delivery -> goods issue.
I would like to to be able to post an automatic goods issue on my delivery.
Could someone please let me me know how to perform the customizing for this or give me the reference of the appropriate post which answers this.
Thanks,Hi,
Use t-code VL23
select varient SAP & STANDARD >>> Click on START IMMEDIATELY
or else
click on schedule >>> click on schedule periodically >>> select your option as Minute and maintain value 1 or ( 1 to 60 )
it means sytem will run this program after every one minute
Also You can able to create your own varients and speciefy criteris like form which sales orz, which delivery types etc.
Kapil -
Goods Issue against outbound delivery from blocked stock
Dear All
I want to do goods issue against outbound delivery created without any reference from blocked stock of my storage location. Is there any way I can achieve this? I know normally SAP allows goods issue from unrestricted stock but my business scenario requires goods issue to be done from blocked stock against outbound delivery.
Please let me know any solution for this.
Thanks and Regards
Satish KumarHi
Check this link where similar issue has discussed and its resolved as well. Please try this and update the findings. If possible could you share the background of this strange requirement.
http://scn.sap.com/thread/1541911
Thank$ -
Goods Receive for Outbound Delivery Without Reference using MIGO
Dear Colleague ...
We might need your insight on the case below related to Goods Receive of Outbound Delivery without Reference using MIGO:
(1) In the current SAP Enjoy screen of MIGO, we are allowed to select the reference document (e.g. = PO, Material Document, Inbound Document, Outbound Document, etc.)
(2) We did 3 (three) kind of test set: GR for Inbound Delivery, GR for Outbound Delivery with STO and GR for Outbound Delivery without reference.
(3) The first 2 (two) cases work just find with MIGO. We believe it is because the receiving plant is pretty much determined in the reference document, which is PO (case 1) or STO (case 3)
(4) However, the last case came up with the error message "Goods receipt not possible for delivery 8000610236: error code 5". We believe that this is the standard design of SAP, that the receiving plant is required and it is not defined explicitly in the delivery document.
(5) Moreover, we also believe that that's the reason why SAP (via the Logistic Execution module) provide the Handling Unit and Shipment, which can be used to perform such receive function, which will imply the MM posting (goods issue and goods receive) IF there is stock transfer involved.
Appreciate for any thoughts or input on the above. Many thanks,
Alvon Sibaraniuse transaction mb0a it will work for the scenario.
-
Automatic Goods Issue in Outbound delivery scenario with resp to Shipment
Hi,
Could you please explain me, how Automatic Goods Issue happens in Outbound delivery scenario process and in shipment process.
Is there any transaction for this?
Can we use VL23 for Automatic Goods Issue in Shipment process? or is it only for Outbound delivery scenario?
How we schedule a background job by using VL23- transaction, how we create variants on what selection criteria?
Could you please explain me in detail?
Thanks A lot.Hi Anil,
VL23 is to schedule Out bound Goods issue.Check once T.code VL06O.
Thanks,
Sree.Manam -
Automatic Goods Issue in Outbound delivery scenario with Shipment
Hi,
Could you please explain me how to Automatic Goods Issue happens in Outbound delivery scenario and in shipment process.
Is there any transaction for this?
Can we use VL23 for Automatic Goods Issue in Shipment process? or is it only for Outbound delivery scenario?
How schedule a background job by using VL23- transaction, how we create variants on what selection criteria?
Could you please explain me in detail?
Thanks A lot.Hi Anil,
VL23 is to schedule Out bound Goods issue.Check once T.code VL06O.
Thanks,
Sree.Manam -
Automatic Goods Issue after Outbound delivery and shipment.
Hi,
I am working on LES part.
Could you please explain me how to do Automatic post goods issue for shipments.
(in our scenario where after outbound delivery, picking, packing shipment takes place.)
Can we use VL23 for automatic goods issue for shipments? (or igoods issue is only for outbound deliveries?)
If so what is the selection criteria for background scheduling-Variants?
Please explain me in detail
Thanks a lot.Anil,
Not sure if I understand your question, Goods Issue is posted for the delivery and not the shipment. In a shipment you can update the actual values for Planned, Check-In, Load Start, Load End etc values. A shipment can have single/multiple deliveries, you can use VL23 for scheduling a background job to do the PGI automatically, use either the standard variants or define your own variant and use that variant to schedule the job.
hith
Sunil Achyut -
Posting of Goods Issue for a Delivery (Different movement types)
Hello SD Experts,
We have this process wherein we use Deliveries w/o reference. There's a customization in place for this process, the movement type is determined through the item category of the material.
Given this scenario, my question is if it is possible to process the goods issue of a delivery with multiple item which require different movement types (diffrent items and item categories thus it have different movement types)?
Thank you for your kind consideration.Hello,
Yes, you can.
As you know LO is std delv doc for delv w/o reference.
And I cat determination for that LO delv doc are
Delv Type __ I Cat Group __ Usage __ High I Cat __ Def I Cat __ Man I Cat __ Man I Cat
LO _____________________TEXT ______________ DLTX
LO ________DIEN____________________________ DLX _______DLX
LO ________LEER___________________________ DLN
LO ________LEER________________DLNG_______DLNZ
LO ________LEIS_____________________________DLX_______DLX
LO________ NLAG____________________________ DLX
LO________NORM____________________________DLN
LO________NORM________CHSP_______________DLN
LO________NORM________CHSP____KLN________KLN
LO________NORM________CHSP____TANN______TANN
LO________NORM________PACK_______________DLN________DLX________DLP
LO________VERP____________________________DLN
LO________VERP_________PACK_______________HUPM______DLN
LO ________VOLL____________________________ DLNG
LO ________ WERT____________________________ DLW
Corresponding maintain movement type in Schedule line cat (Tcode VOV6) & determination that in TCode VOV5.
If you want diff movement type then create your own 'Z' Sch line cat with you desired Movement type (Tcode VOV6) and determine the Sch line Cat accordingly in TCoDe VOV5.
Thanks & Regards
JP -
STO AUTOMATIC GOODS ISSUE TO OUTBOUND DELIVERY
Hi,
I'm trying to automate the posting of a GI to a outbound delivery and can't find where in config to make the relevant setting. We are using the two step procedure and have automated the creating of the delivery but still require the GI to be posted.
Thank you for you assistance!!
Regards
Craigcreate a variant for VL10B and the n schedule a job for abap RVV50R10C using this variant.
Sorry, that was the wrong info:
Correct way is
create varaint for VL06O and then schedule job for abap WS_MONITOR_OUTB_DEL_GDSI
Edited by: Jürgen L. on Jul 8, 2008 1:29 PM -
BAPI for posting equivalent of MIGO GR (101) for OUTBOUND DELIVERY (R05)
Hi everyone
I am looking for a BAPI or function module to do the above; it is the second leg of an STO posting between plants, the first leg being where the goods issue is posted against the outbound delivery into in-transit stock (IM movement 641), with the second being to GR this stock with a 101, which will take it out of in-transit and into unrestricted stock at the destination plant.
I have tried BAPI_GOODSMVT_CREATE from every angle but have come to the conclusion it does not cater for this. I also tried to do the GR against the STO (P/O) from which the delivery was created, but this does not work as the follow-on documents for the delivery will not be updated.
Any suggestions?
Thanks
Andrewhi,
i try to doing posting goods issue for outbound delivery out fo the regular progression.
the posting is automaticly as part of outside program.
thanks alot, -
Hi friend,
when doing third-party "Individual PO" (item category group BANC, item category TAB) , do we do a Goods Issue?
If so, what transaction for Goods Issue do we use (MIGO, MIGO_GI, MIGO_TR, MB1A, VL01) ? What Movement Type
gets triggered when we do a Goods Issue for "Individual PO" ?
Also, in the Sales Order(VA02) -> Procurement tab, the Schedule Line is CB which is tied to Movement Type 601 (tcode VOV6).
Does this mean that the Goods Issue transaction i must use is VL01? In tcode OMJJ, it shows allowed transaction for
Movement Type 601 is VL01.
Can anyone provide some clarification on this?
Thanks so much.X = customer
Y = my company
Z = vendor
Based on my understanding, third-party 'Individual PO' is slightly different than the regular third-party
PO process. In regular third-party PO process, X orders goods from Y, Y order goods from Z, then
Z sends the goods directly to X, Z invoice Y, then Y invoice X. Thus, this process, i know that there's
no need to post a Goods Issue like you said.
However, in the 'Individual PO' process (from what i've read),
Z would send the goods to Y instead of sending it directly to X. Then Y sends the goods to X after
receiving the goods from Z. Here, i would think we would need Y to post a Goods Issue (when Y is sending goods to X). Because when i do a Goods Receipt during the 'Individual PO' process,
transaction MB5B shows that the plant(i'm assumping it's Y's plant) shows "Total Receipts = 5,
Total Issues = 0 " and my inventory g/l account also gets Debited. Thus, i wonder if Y posting a Goods Issue to customer X would then result in "Total Receipts = 5 , Total Issues = 5" in transaction MB5B
and hopefully my inventory g/l account gets Credit as well.
Perhaps i'm confusing "Goods Issue" with outbound delivery VL01N?
Is there a difference between Goods Issue and Outbound Delivery?
Thank you.
Your reply has been very helpful.
Maybe you are looking for
-
I have an 11 yr old who I want to use my apple id on our Iphones jointly. We do not want her to have an email address currently because of some issues. Anyway, does both phones being connected to the same apple id mean that when IMessage is used that
-
Add a new field in segment CRMW_BUPA_HEAD for Business document BUPA_MAIN
Hi, I want to add a new field in the segment CRMW_BUPA_HEAD for the BDoc BUPA_MAIN, in order tu use a filter criteria for the subscription. Using the Bdoc modeler (transaction SBDM) I tried to add the component PARTNERTYPE (Data element BU_BPKIND) th
-
Can we Read/Display the content of Word/PDF file in Flex 3/4 ?
Hello All, Can we read/display the content of Word/PDF file in Flex 3 or Flex 4?. I have one word file containing Arabic and English content with some settings like Bold, Color, Align etc. I want to display the content of this word file as it is
-
ITunes Relocation Question.
Hi, I wish to move my iTunes default folder from user/music/.... to a external hard drive to free up around 500Gb worth of music, Tv shows and movies, 2 questions. 1 - will it affect my libray inside iTunes and will i have to import everything back i
-
I have been able to successfully set up icloud syncing with my mac and iphone with the "work" and other home based calendars. However, I run a business and I have ical server running with my business calendards. How do I get the ical server calenda