SD reader on macbook pro retina stopped working after mountain lion upgrade

I tried to use the SD reader on my new MacBook Pro Retina tonight and I can insert the SD card and the mac does not see it. It worked prior to my upgrading to mountain lion. Any ideas?

I also have a Mac Pro Retina and have the exact same problem after upgrading.  I will say that despite the SD card not showing up on my desktop or in the finder window, I am able to import to Lightroom 4 with no problems and I get an error message when i withdraw it, asking me to "EJECT IT PROPERLY".  APPLE! Please help us.

Similar Messages

  • MacBook Pro is VERY slow after Mountain Lion upgrade

    Hello folks, I have a MacBook Pro that was running very well before I upgraded to Mountain Lion...since then it runs worse than a Windows machine.
    The configuration is as follows:
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,3
      Processor Name:          Intel Core i7
      Processor Speed:          2.2 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          8 GB
      Boot ROM Version:          MBP81.0047.B27
      SMC Version (system):          1.70f5
      Serial Number (system):          C0xxxxxxF92
      Hardware UUID:          5BCBC5E9-E531-55F0-A712-B40886C7B45F
      Sudden Motion Sensor:
      State:          Enabled
    As stated, I have 8 GB of ram, under system memory I have the following info:
    Free: 863 MB
    Wired: 1.28 GB
    Active: 3.60 GB
    Inactive 2.27 GB
    Used 7.15 GB
    VM Size 306.76 GB
    Page Ins 1.22 GB
    Page Out 745.4 MB
    Swap Used 2.12 GB
    Disk usage is:
    Space Utilized 454.49 GB
    Space Free 294.8 GB
    I have rebooted on many occasions and it is still slow. 
    Any ideas as to what could be going on?
    John
    <Edited By Host>

    Regardless of whether you think you need it, uninstall it and test to see if the slowness problem is solved.
    If it isn't put it back if you must, but there's no point trying to look for another cause till you've eliminated this one. You have a huge amount swaps which is what is causing your slowdown. 90% chance that's your AV software doing that.

  • Macbook Pro won't boot after Mountain lion upgrade

    I bought the Mountian Lion upgrade and it installed fine on my MacBook Pro, and the machine worked fine yesterday.  I performed a normal shutdown, and today it won't boot up.  The Apple logo and the spinning pinwheel is all I get.  Is there a known issue?

    Welcome to Apple Support Communities
    Press Command and R keys when your Mac starts and reinstall OS X. Mountain Lion is damaged in the computer

  • Applescript stopped working after Mountain Lion upgrade

    Hi after upgrading to Mountain Lion (ML) the applescript that I use to reply to certain emails has stoped working on incoming emails. I have the script in the "new" correct folder. The funny thing is that the script works when you "apply rules" from the messages dropdown menu.

    This is the script:
    using terms from application "Mail"
              on perform mail action with messages theMessages for rule theRule
      --tell application "Mail"
                        repeat with eachMessage in theMessages
      --set theContent to content of eachMessage
                                  set emailFrom to extract address from sender of eachMessage
                                  try
      --set AppleScript's text item delimiters to {"(", ")"}
      --set contentParts to (every text item in theContent) as list
      --set AppleScript's text item delimiters to ""
      --set emailOnly to item 2 of contentParts
      --set recipientAddress to emailOnly
                                            set recipientAddress to emailFrom
                                            set theSubject to "Text for subject"
                                            set theSignature to signature "One"
                                            set theSendContent to " "
                                            set theSender to "[email protected]"
                                            set theMessage to make new outgoing message with properties {subject:theSubject, content:theSendContent, sender:theSender, visible:true}
                                            tell theMessage
      make new to recipient with properties {address:recipientAddress}
                                                      set message signature to theSignature
                                                      send
                                            end tell
                                  end try
                        end repeat
      --end tell
              end perform mail action with messages
    end using terms from

  • Pkg's made by PackageMaker from Xcode4.2 stopped working after Mountain Lion 10.8.1 upgrade!

    We have some pkg's that used to install fine across Snow Leopard, Lion and Mountain Lion.
    Those pkg's were made from PackageMaker that came with Xcode4.2.
    Since last week's Mountain Lion 10.8.1 upgrade, the pkg's preflight/postflight scripts stopped working
    on Mountain Lion machines, but still work with Lion and Snow Leopard.
    The current workaround we use is to produce the pkg using PackageMaker that comes from Xcode4.4 auxiliary tools.
    These pkg's work fine on all mentioned OS X.
    I think this should be either a bug in 10.8.1 upgrade or a change of policy.
    Can someone reproduce and clarify?
    Thanks!

    You are not alone!!
    Same problem with Plantronics.
    I just bought their Audio 648 Stereo USB Headset and have exactly the same issue you mention at the outset:
    Essentially, while my [Plantronics Audio 648] Headset is recognized in the list of devices in System Preferences > Sound, it doesn't do anything in terms of outputting or inputting audio
    So Apple, what are you going to do?...
    A lot of third party accessory manufacturers must be getting quite frustrated at the numer of complaints they get from Mac users, when it seems its the Mac OS which is to blame...

  • My iTunes match on my MacBook Pro hasn't worked since Mountain Lion install. Tried Apple Tech but all their suggestions didn't solve the issue. Guess I will try them again on Monday. Clearly this is a common problem and a Mountian Lion conflict issue.

    iTunes match hasn't worked since Mountain Lion install. Cloud icon keeps striking~ off. Won't upload new tracks to iTunes match. Just the eternal circle of step one, two, freeze....then tries again but never gets completed. Worked fine before Mountain Lion. Apple tech tried over phone for an hour but it didn't solve this issue. See others are in the same boat. Any help with this, please??

    Same issue here with a MacBook pro recently upgraded to Mountain Lion.  I hadn't tried iTunes Match prior to the upgrade so can't say whether or not it worked previously.
    Getting quite frustrated!

  • Macbook Pro battery stopped working after water spill.

    Hello,
    I own a Macbook Pro 13 inch mid 2010 that suffered water damage, after that it stopped functioning so I unplugged and plugged again the battery, the computer than turned on and now it's working well. The only issue I'm having is that now it only works when connected to a power source, there is a message telling that my battery has to be replaced (Condition: Replace now). My question is: If I replace the battery would the problem be solved or it may be a problem in my logic board due to the liquid spill? Can anyone help me?
    Battery Information:
      Model Information:
      Serial Number: 9G01804RUD3MA
      Manufacturer: DP
      Device Name: bq20z451
      Pack Lot Code: 0
      PCB Lot Code: 0
      Firmware Version: 201
      Hardware Revision: 2
      Cell Revision: 158
      Charge Information:
      Charge Remaining (mAh): 0
      Fully Charged: No
      Charging: No
      Full Charge Capacity (mAh): 0
      Health Information:
      Cycle Count: 231
      Condition: Replace Now
      Battery Installed: Yes
      Amperage (mA): 0
      Voltage (mV): 4064
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes): 10
      Disk Sleep Timer (Minutes): 0
      Display Sleep Timer (Minutes): 10
      Wake on AC Change: No
      Wake on Clamshell Open: Yes
      Wake on LAN: No
      Current Power Source: Yes
      Display Sleep Uses Dim: Yes
      PrioritizeNetworkReachabilityOverSleep: 0
      Battery Power:
      System Sleep Timer (Minutes): 10
      Disk Sleep Timer (Minutes): 10
      Display Sleep Timer (Minutes): 2
      Wake on AC Change: No
      Wake on Clamshell Open: Yes
      Display Sleep Uses Dim: Yes
      Reduce Brightness: Yes
    Hardware Configuration:
      UPS Installed: No
    AC Charger Information:
      Connected: Yes
      ID: 0x0100
      Wattage (W): 60
      Revision: 0x0000
      Family: 0x0085
      Serial Number: 0x00a1c4ce
      Charging: No

    You have "killed" your Macbook.
    If you let it dry out, it MAY start working again, but if it does, this will inevitably be temporary as corosion sets in and does futher (and almost certainly terminal) damage.
    The only benefit of letting it dry is that IF it works again, you will be able to save what is on the HDD.  Only important if you don't have a backup.......you DO have a backup don't you???
    Irrelevant whether you have AppleCare or not - water damage isn't covered.  And the cost of repairs is likely to exceed the value of your MBP.  It is worth taking it in for a free evaluation of the cost of a repair.
    Your best option may be to sell it for spares and invest in a new computer - which will be kept a long way from any drinks or other sources of liquid damage! 

  • Macbook Pro won't start after Mountain Lion download.

    Downloaded Mountain Lion for my 2007-08 Macbook Pro. Internet was painfully slow (60kb/sec, usually 15 mgb/sec). After not using it a week while vacationing, I started it up, and it was working fine until it randomly shut down and brought up an error screen (hence the reason it shut down) and asked if I wanted to boot normally. I powered it down; now it won't start at all. Power button doesn't work, demounting the battery for a minute and remounting doesn't work, nothing works. I have a genius bar appointment soon, but am wondering if anyone has some advice.

    Close problem - I believe the problem is RAM is storing your last data, and not releasing it, so you cannot boot it. Trying removing RAM fully, then starting.

  • 2010 Mini superdrive has stopped working after Mountain Lion update - anyone else?

    After updating to 10.8 the superdrive on my 2010 mini has completely stopped working. It will not accept any disks. Disk Utility sees the drive as a working drive. Anyone else having this issue? If yes and you've resolved it, how??

    Same thing happened to me with Mountain Lion. It seems that at the moment there's no solution. I've tried to burn a DVD with Toast Titanium, iDVD and the SimplyBurn. All of them failed.
    It's a shame that Apple did this because we pay for a computer with a drive that could burn DVD discs. I´m very, very disappointed with Apple!

  • Why do gestures stop working after Mountain Lion update?

    I've just installed Mountain Lion on my MBP, and soon after a reboot, gestures stop working.
    Rebooting fixes this, at least temporarily. But soon afterwards I can't switch between screens with three finger swipe etc.
    Yes, gestures are enabled in preferences.
    Any clues?

    Having same issue with iMac and Magic Mouse.
    I found that Mission Control stopped working as well (even with the App shortcut in Applications) and as such found a quicker workaround than login / logout.  Open Terminal and type:
    killall Dock
    This will restart the Dock and Mission Control etc and seems to restore the gestures.
    Cheers
    Phil

  • Macbook Pro won't reboot after mountain lion installation.

    I installed the new Mountain Lion o/s and the installation was sucessful. However, when the computer started to
    reboot by itself, it just stuck on the grey screen with the logo and the turning wheel. It has been like this for hours.
    What should I do to fix this problem? Please help. The computer was purchased during Christmas 2011.

    Call Apple support and they can talk you through getting back to a restore.
    It appeared that my disk was a little corrupt before performing the upgrade.  You should use diskutility to verify and repair your disk before doing this upgrade.
    Or just hold the option key down on boot up to see if you can get to the restore utility.

  • Internet sharing from Wifi to Ethernet is not working after Mountain Lion upgrade

    First I was having trouble just connecting these two, now I can't get the Internet sharing to work. Here's what I am trying to do: I want to share my Macbook Pro's internet connection from it's Wifi to another laptop I have connected via ethernet cable. They will ping each other now. The problem now is that the laptop won't pick up the Internet connection from the Macbook Pro, even though I have it configured exactly as I had in Snow Leopard. Nothing has changed on the laptop from before when it worked fine with Snow Leopard. But now that I updated to Mountain Lion, Internet sharing no longer works no matter what I try. I've been trying to find a solution by to no avail. Could anyone here offering some advice or a solution that will fix my problem? I've been over the basic steps over and over again, so please don't ask me to do something stupid like reboot or check the Sharing settings. They're exactly how they are meant to be, but the thing just won't work.

    tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
    listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes
    17:04:42.617423 IP 192.168.6.3 > 8.8.8.8: ICMP echo request, id 12095, seq 1035, length 64
    17:04:43.617545 IP 192.168.6.3 > 8.8.8.8: ICMP echo request, id 12095, seq 1036, length 64
    17:04:44.617468 IP 192.168.6.3 > 8.8.8.8: ICMP echo request, id 12095, seq 1037, length 64
    17:04:45.617274 IP 192.168.6.3 > 8.8.8.8: ICMP echo request, id 12095, seq 1038, length 64
    17:04:46.617402 IP 192.168.6.3 > 8.8.8.8: ICMP echo request, id 12095, seq 1039, length 64
    Ran a TCPdump on my Macbook Pro. It is recieving the ping requests, but the laptop still isn't getting replies to its pings. So something is wrong in the Macbook's configuration somewhere. I don't know where, though.

  • Stand-by button on Cinema HD display doesn't work after Mountain Lion upgrade

    Hi,
    After I upgraded my Mac mini (spring '09) to Mountain Lion it appears that the buttons on the side of my Cinema HD display doesn't work. There is a setting in sys preferences that should put the Mac in stand-by when the power button is pressed. This doesn't work after I upgraded to OSX 10.8 Mountain Lion.
    Does anyone have similar experience. Anyway to fix it?
    Thanks,
    Henrik

    Have done some further investigating (to no avail).  The TV is displaying in my system Info as follows:
    Intel HD Graphics 3000:
      Chipset Model: Intel HD Graphics 3000
      Type: GPU
      Bus: Built-In
      VRAM (Total): 384 MB
      Vendor: Intel (0x8086)
      Device ID: 0x0116
      Revision ID: 0x0009
      Displays:
    Color LCD:
      Display Type: LCD
      Resolution: 1440 x 900
      Pixel Depth: 32-Bit Color (ARGB8888)
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Built-In: Yes
      Connection Type: DisplayPort
    TOSHIBA-TV:
      Resolution: 1920 x 1080 @ 60 Hz
      Pixel Depth: 32-Bit Color (ARGB8888)
      Mirror: Off
      Online: Yes
      Rotation: Supported
      Television: Yes
    But nothing on the screen.
    Does anyone know if Apple have banned certain screens????

  • Iphot not working after mountain lion upgrade

    I recently upgraded to Mountain Lion and now iphot is not working. I need this ASAP cause i have scholl projects to turn in.

    Olivier1
    "Under Mountain Lion I have 2 issues> I can NOT upgrade iphoto 9.3.2 and iMovie 9.0.7 despite>"
    I had this problem this AM.  Tried lots of crazy things. Tried the rebuild (Hold the Option & Cmd keys) and open iPhoto.  That didnot help.
    I repaired my permissions and BAM!  That worked!
    Try it!

  • Macbook air batter life affected after mountain lion upgrade

    after upgrading my computer with mountain lion there has been a big drop in battery life. I have a 2011 macbook air 13 inch. At least a 40% reduction in battery life. No large use of cpu as per activity monitor.

    Add me to the list of macbook air users whose battery life is now about 60% what it was prior to the 'upgrade'.  My 2011 air also runs much hotter.
    Apple, please fix!!!

Maybe you are looking for

  • How to delete the first page from a large number of documents

    Hello all, My company has migrated from Adobe Acrobat pro 8 to 11. In version 8 we had used Document Processing to remove the first page from all pdf's within a directory (5000+). This process took about an hour. Now my research has led me to use Act

  • Oracle APEX 4.0  -  Interactive Report - Table Column Filter Issue

    Environment: Oracle APEX 4.0  -  Interactive Report - Table Column header Filter Issue We have developed an interactive report using Oracle APEX 4.0, which contains a record count of around 3,000 Rows. All the rows values are unique in nature. When w

  • Script to customize button event - "Save"

    I am trying to create a "Save" button but am very new at creating JavaScript. What I want to do is add a button on a form that allows form fillers to save the form without having to go to the File Menu-Save or-Save As. I have selected Click in the Sh

  • BPM Total Processing Time

    Hi, I am trying to calculate total processing time of the BPM. I am capturing start and the end time in BPM.Now the issue is that how di I get the difference between these two times Plesae let me know if you have any ideas on this. Also let me know i

  • CRM Information for SAM

    Hi, i am a system Engineer working for MS Partner in Qatar. Currently i am running SAM process for one of our Government customers. They have CRM 2011, CRM 2013 and CRM 2015. MY question is : i need to know number of users - Developers - Admins that