SDMI is being created instead of SDMJ

i am doing implementation project in Solution Manager, i have activated ChaRM for the project.
when i create a change request with subject "Development(Implementation) " it creates type SDMI request instead of SDMJ.
As far as i know Development(Implementation) is same as Normal Correction and it should create SDMJ type request, shouldnt it??
Please help

Hi Sindra,
When you select Development (Implementation) in the subject field a SDMJ should be created, and if you select Normal Correction (Maintenance) then a SDMI will be created, or if you select Development Activity Template then a SDMI will be created.
You can check the settings in SPRO -> Scenario Specific Settings -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control -> Define Mapping Rules for Copy Controls. In the table displayed you can see the Subject Value that triggers the follow on document.
Hope this helps,
Rich Labib

Similar Messages

Excise Invoice being created before standard Invoice is created

Hi
I create a sales order. With reference to the sales order I create a delivery.
With reference to the delivery, in VF02, if I try to create an Invoice, I get the following message - Excise Invoice created for the Invoice 597500041.
I need the standard invoice to be created first and using the Tcode Ji11n I should create the Excise Invoice.
But instead I get the above message.
What settings should I check and correct.

Dear Vaideeson Marap...
As per my understanding of your question
If excise invoice is being created automatically the movement you create the commercial invoice in (vf01) ,you need to remove the check box in "excise invoice during billing " respective excise group.
Please check and revert
Thanks&Regards
Raghu.k

Stop Inbound IDOC's from being created

I want to stop inbound IDOC's for a particular partner (type LS) from being created in our R/3 system. Is there a way to do this? I am aware these can be stopped in the middleware, but this is not possible in our case. I am also aware that I can stop these IDOC's from being processed via the partner profile, however, there will be a huge number of useless IDOC's that will be created in our system and I want to avoid that.
Hence, I do not want the inbound IDOC's to be created in the first place even though they are transmitted to SAP. Is this possible?
Any inputs will be highly appreciated.
Thanks,
Raghu.

Hi Satwik,
Choose Idoc in WE02.
Get port name, Then in WE21 get RFC name.
Go to transaction SMQS - Here we can block this RFC instead of blocking the queue.
Thanks,
Anil

Home Folders Not being Created Correctly

I'm having some sort of major issue with my directory and/or afp setup.
I'm trying to create new users and the home folder won't be created at all. If I change the permissions (give write access to the user's group) on the root of the share that hosts the home folders it will create one but it is mangled. The home folder only conatins a Library and Desktop Folder. Documents, Movies, Music, Pictures, Public, and Sites are missing. Also the permissions on this newly created home are mangled being 700 instead of 755.
All Existing Users are functioning okay but creating new home folders is broken. It has been a while since I've needed to create new users. I'm worried it may be hard to isolate the cause and effect. I have done software updates 10.4.6 and now 10.4.7. Also I changed this machine to handle local DNS.
Any Ideas?
XServe G4 1.0 Single 500GB Mirrored RAID on Internal Drives 10.4.7 Server

We also have this problem, and before I go and re-edit the home folder entries for each of our 600-odd users, I'd appreciate if you could confirm that this solution is going to work for me...
Troubleshooting another problem, we applied the x.4.6 update about the same time as the Network Mounts were turned off then a restart and turned back on again. A bad combination.
Faced with a Monday morning "None of the students can log in" crisis ("you are unable to log in to the user account "username" at this time..."), and thinking that the problem had been caused by my turning the network mounts off, I discovered that student mount points now show (in WM's Home tab) as "afp://10.224.96.2/Students" where they used to be "afp://mainserver.westlandhigh.school.nz/Students".
The easy fix to the problem (not knowing about artnum 303697 at that point) was to reassign the home folders to the 10.224.96.2 home. (when you don't know what to do, you do what you know how to do). This got the users happily working again, although there were all sorts of strange problems relating to disk quotas that some users had to work through.
a few days later the log entries about DNS were noted, artnum 303697 applied, and changeip fixed those things. hostname responds correctly as mainserver.westlandhigh.school.nz. Everything ran reasonably well for the next couple of months, although the AFP/CPU hogging problem mysteriously appeared...
x.4.7 seems to have solved the AFP/CPU hogging, but now we've discovered a problem creating home folders for new users.
Tim's fix on 3rd August shed some light... An interesting quirk of using Presets is that we still have a Student preset that puts the FQDN name in the home folders list. So we can leave the FQDN home folder selected, click Create Home Now, and on Save, the folder is created. But the student can't login: "you are unable to log in to..."
Change the mount point to the IP number, Save, and it almost works - the system tells the user they are already logged in to another computer... Selecting Allow simultaneous login from Advanced solves this problem, but leaves the system open for the student to attempt to log in twice, with the potential for havoc there. It's also not a wonderful work around as the other staff who sometimes enter new users are likely to miss one or more of the extra steps...
I guess that I'm going to have to turn Network Mounts off in Sharing, and then turn them on again to get the right set of mount points showing in Accounts/Home, and then work my way back through all the students and point them back to the FQDN mountpoint again?
Is it likely to be worth the pain? Will it cause some other problem to arise? Is there an easier way?
G4 DP 1.25 Mac OS X (10.4.7)
G4 DP 1.25

Duplicate folders being created within folders

I am noticing that since we started using Contribute on our
website that duplicate folders are being created within the folder.
For example - I have a folder called Ministries. Inside Ministries
are three subfolders - Peru, Brazil & Mexico. I'll go in to
upload a page to the Mexico subfolder and find that the entire
Ministries folder has been duplicated inside the Ministries folder.
So instead of looking like this:
Ministries -
Peru
Brazil
Mexico
It looks like this:
Ministries -
Peru
Brazil
Mexico
Ministries
Peru
Brazil
Mexico
Has anyone else encountered this? I haven't been able to find
any coding issues that would account for this. I admit that I
probably just don't know enough to know where to look.
Any assistance would be greatly appreciated.

Hi,
I am unable to reproduce this issue when using Contribute.
Could you please check if that system is infected by any
virus?
Please look the following site:
http://www.imserba.com/forum/archive/index.php/t-71175.html
Thanks,
Radhika

0kb files being created!?

I was trying to update my site today and when I 'publish site changes' multiple files are being created as 0kb instead of actually having the data that I see while creating the page(s). Much thanks for any help/advice you all have.
Aaron

When you have problems with iWeb or publishing, you really need to publish to a local folder to find out where the problem is. See....
http://www.iwebformusicians.com/WebMusic/iWebTips.html
Are you using iWeb's apology for an FTP?

[svn:bz-trunk] 23143: Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method .

Revision: 23143
Revision: 23143
Author:   [email protected]
Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
Log Message:
Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method. Promote it to be at the top instead of at the bottom.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

Revision: 23143
Revision: 23143
Author:   [email protected]
Date:     2011-10-27 06:31:02 -0700 (Thu, 27 Oct 2011)
Log Message:
Certain code needs to check the existence of the class validation validator (some brokers and other listeners) during message broker init, however the validator was not being created till the very end of the method. Promote it to be at the top instead of at the bottom.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java

Accounts being created with administrative group rights

Hello,
The server is a Windows 2003 R2 Enterprise fully patched used for Shared Hosting purposes. It runs Hsphere control panel. I am trying to identify how the following hack is happening.
1) There are users being created with Administrative group rights.   Below is the EventViewer log for the user creation:
User Account Created:
    New Account Name:    username
    New Domain:    PCNAME
    New Account ID:    PCNAME\username
    Caller User Name:    PCNAME$
    Caller Domain:    DOMAINNAME
    Caller Logon ID:   (0x0,0x3E7)
    Privileges       -
Attributes:
    Sam Account Name:    username
    Display Name:   <value not set>
    User Principal Name:   -
    Home Directory:   <value not set>
    Home Drive:   <value not set>
    Script Path:   <value not set>
    Profile Path:   <value not set>
    User Workstations:   <value not set>
    Password Last Set:   <never>
    Account Expires:   <never>
    Primary Group ID:   513
    AllowedToDelegateTo:   -
    Old UAC Value:   0x2DAB2B0
    New UAC Value:   0x2DAB2B0
    User Account Control:   -
    User Parameters:   <value not set>
    Sid History:   -
    Logon Hours:   <value changed, but not displayed>
There exists entries as well where the primary group ID is changed to the Administrative group, but I am omitting such.
2) I tried to identify what Caller Logon ID:   (0x0,0x3E7) means. I found out from here:
http://blog.joeware.net/2013/01/14/2667/ that I can use LogonSessions.exe to identify it.
Output from LogonSessions.exe is pasted below (snippet):
[0] Logon session 00000000:000003e7:
    User name:    DOMAINNAME\PCNAME$
    Auth package: NTLM
    Logon type:   (none)
    Session:      0
    Sid:          S-1-5-18
    Logon time:   9/11/2014 12:41:53 PM
    Logon server:
    DNS Domain:
    UPN:
        4: System
      316: smss.exe
      364: csrss.exe
      392: winlogon.exe
      440: services.exe
      452: lsass.exe
      628: svchost.exe
      756: LMAgent.exe
      840: svchost.exe
     1000: spoolsv.exe
     1252: avagent.exe
     1268: camWMIAgent.exe
     1324: cissesrv.exe
     1380: cpqrcmc.exe
     1404: vcagent.exe
     1440: svchost.exe
     1480: HsQuotas.exe
     1740: inetinfo.exe
     1780: EmailAgent.exe
     1856: snmp.exe
     1884: sysdown.exe
     1920: smhstart.exe
     2192: svchost.exe
     2388: cmd.exe
     2396: hpsmhd.exe
     2444: cqmgserv.exe
     2464: cqmgstor.exe
     2484: HSphere.exe
     2596: wmiprvse.exe
     2676: cmd.exe
     2684: rotatelogs.exe
     2692: cmd.exe
     2700: rotatelogs.exe
     2732: searchindexer.exe
     2812: hpsmhd.exe
     2824: cqmghost.exe
     2852: svchost.exe
     3044: cmd.exe
     3052: rotatelogs.exe
     3080: cmd.exe
     3088: rotatelogs.exe
     5452: svchost.exe
     5596: GravitixService.exe
     7392: csrss.exe
     7232: winlogon.exe
     6888: csrss.exe
     9832: winlogon.exe
    10388: wawrapper.exe
    10352: cpqnimgt.exe
     9496: msiexec.exe
     6068: w3wp.exe
     4748: webalizer.exe
3) I also learned from http://support.microsoft.com/kb/243330/en-us that Sid:          S-1-5-18 means:
SID: S-1-5-18
Name: Local System
Description: A service account that is used by the operating system
That is all great info, but I am not sure I can put together what I have learned to attempt and get closer towards identifying how in the world users are being created and then being assigned administrative group rights.
I am a Linux person mostly, but I am comfortable following a properly explained thread regarding windows 2003 R2 Enterprise issues.
The server is fully patched and it is running Lumension security product. What's more, Norman Malware tracker, tdskiller.exe (Kaspersky) and McAfee rootkitremover.exe have been run without any apparent Malware/Virus infection
Hope someone with advanced admin skills can advise.
Thank you

Hi,
You mentioned that, “I am trying to identify how the following hack is happening”, would you please tell us that why did you think the event represent a hacking behavior?
In a Shared Server Hosting environment, the underlying hosting control panel tool (Hsphere in this case) should be creating only virtual FTP users with a specific group. So no users with Administrative group should be ever created. If this happens,
it constitutes a breach of server security=positive hacking attempt.
>how in the world users are being created and then being assigned administrative group rights.
In addition, would you please be more specific about this question? Did you find the event message on a domain joined machine?
I want to be able to understand in full how/what process is allowing users to be created with Admin rights. In other words, I want to know what IP was used to issue the command, if ASP.net was used (abused in this case), or anything else related to
it so that we can patch this particular hole.
Best Regards,
Amy

HT1391 I started download on my iphone and cancelled the same before it could complete. There is no option of removing the incomplete download and also it is affecting my songs in 'Music'. The next or previous song is being played instead of the song sele

I started a download of a video in the app "Free gift for 12 days". I cancelled the download before it was completed. It is now affecting the music in my phone library, as the next or previous song is being played instead of the selected song. Any suggested solutions?
I have an iPhone 5 wid the latest OS 7.0.4 installed.

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

While creating a Sales Order , service order is being created

1) VA02 --> given some number for order (71009759 valid sales order for service )
2) trying to create a material ( say SERVICE K in my case and qty 1)
3) now i press save button
4) now i go to IW32 a new service order is being created there.
where should i check for the user exist created which is making the service order to be created automatically
Plz help required....
Regards
venkat sharma
Edited by: venkat sharma gaddala on Mar 26, 2009 8:38 PM

Hi,
Userexit's for IW32
Exit Name           Description
IWO10012            Maintenance order: Priority handling on central header
[Find BADIs for a Transaction   |Re: BADIs for a Transaction]

Library Backups No Longer Being Created in 10.1.2

No matter what I do, Library Backups are no longer being created in 10.1.2. This is happening on all 6 of my production Mac Pros and iMacs. I can change the location of the Library Backup folder, but nothing is ever created in the new location. It's as if FCPX no longer knows how to backup libraries.
Some background...
We are working with Libraries and Media files on our XSAN Volume.
OSX 10.9.3
FCPX 10.1.2
We did not notice the Backups were not being performed until one of our Libraries had an issue and we could not find a single Backup of the library.
What I have tried...
Move Libraries to Local System Volume - Still No Backups.
Change Library Backup Location - Still No Backups.
Toggle Library Backup Location to No Backups and then Back to Backups - Still No Backups.
Ensure Proper Permissions on Library Backup Folder - Still No Backups.
Trash FCPX Preferences - Still No Backups.
ReInstall FCPX - Still No Backups.
I am at a loss at what to do next. I can't even see the backup process happening in console, or any errors that might give me a clue as to why it's not working. Short of trying to reinstall Mac OS on one of my production macs, I see no other alternative. Considering I'm having this issue across our entire production system, I'm wondering if this is a very serious FCPX 10.1.2 bug.
Is anyone else having these issues????

Tom Wolsky wrote:
Definitely not working as advertised. I made a new library. Imported some stuff. Futzed around. No backup. Waited more than an hour. Made a new project and always immediately a backup appeared.
I've had pretty much the same results trying to sort out what is going on since the 10.1.2 update regards Library Backups.
I'm getting no backups with newly created Libraries like others, tried all sorts of juggling acts in the new settings arrangement trying to find a way in.
What I have so far discovered is that Libraries are not created until a Duplicate Project is created of the original Project for the Library, then it appears to do as expected.
Seems like a bug.
Hope other users can confirm this.
Al

Create inquiry without material being created

Dear All,
Issue is regarding creation of inquiry, when material not being created.
Requirement is like at inquiry level customer may / may not know the material available, initially customer may not be aware of the products available but they want to buy that material.
Whereas in SAP, material has to be entered which is created in material master.
Is there any soln for the creation of inquiry / quotation (same case with Quotation too) with out material being created.
Regards,
Vijayasharee

Thank you one-and-all for the quick response.
Further i/p's for my query.
Suppose the customer send the RFQ (request for quotation) with their part no. where in that particular material is not produced.
However, once the RFQ is received company is confident enough to start produce that particular material for the first time.
So how to map this ie., customer part no. is known, where as company doesn't have the material as of now, once the material is produced it will have its own part no.
How to send a quotation with out company's part no. is the issue.
I/p's will be rewarded.
Regrds,
Vijayashree

Item Texts Is Not Being Created in BAPI_BILLINGDOC_CREATEMULTIPLE

Hi.
I am Using Bapi TO Create Invoice, Every thing is created successfully , but item text is not being created. Code is as below.
DATA: s_vbap TYPE vbap,
            t_billing TYPE STANDARD TABLE OF bapivbrk WITH HEADER LINE,
            t_datain TYPE STANDARD TABLE OF bapikomfktx WITH HEADER LINE,
            t_return TYPE STANDARD TABLE OF bapireturn1 WITH HEADER LINE,
            t_success TYPE STANDARD TABLE OF bapivbrksuccess WITH HEADER LINE.
      SELECT SINGLE * FROM likp
      WHERE vbeln = v_del_doc_no.
      SELECT SINGLE * FROM lips WHERE
      vbeln = v_del_doc_no.
      t_billing-salesorg = likp-vkorg.
      t_billing-ref_doc = likp-vbeln.
      t_billing-ref_item = lips-posnr.
      t_billing-doc_number = v_del_doc_no.
      t_billing-itm_number = lips-posnr.
*      SELECT SINGLE fkarv FROM tvak
*            INTO t_billing-ordbilltyp
*            WHERE auart EQ zsoa_so_header-auart.
      SELECT SINGLE auart FROM vbak
                  INTO t_billing-ordbilltyp
                  WHERE vbeln EQ order_num.
      t_billing-price_date = sy-datum.
      t_billing-ref_doc_ca = likp-vbtyp.
      t_billing-material = lips-matnr.
      t_billing-plant = lips-werks.
      APPEND t_billing.
      BREAK-POINT.
      CLEAR: t_datain.
     t_datain-ref_doc = v_del_doc_no.
      t_datain-ref_item = '000010'.
      t_datain-applobject = 'VBBP'.
      t_datain-text_id    = '0001'.
      t_datain-langu      = sy-langu.
      t_datain-format_col = '*'.
      t_datain-text_line = 'FSG 2829'.
      APPEND t_datain.
      CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
        TABLES
          billingdatain = t_billing
          textdatain    = t_datain
          return        = t_return
          success       = t_success.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
      LOOP AT t_return.
        itab_msg-type = t_return-type.
        itab_msg-msg = t_return-message.
        APPEND itab_msg.
        CLEAR itab_msg.
      ENDLOOP.
      READ TABLE t_success INDEX 1.
      p_i_bill_doc = t_success-bill_doc.
    ENDIF.
ENDIF.
CLEAR: itab_so_items, itab_so_items[] , delivery_no , itab_return[].
So Text FSG 2829 is not being created in Item Text.....

Hi Tahir,
You can check with the below thread
A question of BAPI_BILLINGDOC_CREATEMULTIPLE
Regards,
Pawan

Exchange Office Web Apps Preview Does not work in OWA. An error occurred while the document preview was being created

Hi,
I have managed to configure intergration between Office Web App server 2013 and Exchange 2013 OWA.
I have created a test users Test1 and Test 2. I have given full access on Test2 mailbox to user test 1.
When I login to owa for user test1 and preview the attachment it works fine.
However when I use "Open another mailbox" in OWA and open test2 mailbox and try to preview the attachments in test2 inbox it errors as
" An error occurred while the document preview was being created. Please try again later " as follows
I am new to office web apps server 2013 and implemented it first time. Can anyone suggest resolutions or troubleshooting ?

Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Does the error appear when you directly access test 2 mailbox through OWA?
2. Check if there is 141 error in your event log.
3. Check whether Office web app server connects with Exchange server when the issue happens.
Access the URL: https://hostname/hosting/discovery
4. Grant full access permission again and check the result.
For more information about Office web app integration with Exchange, please refer to the following article:
http://www.msexchange.org/articles-tutorials/exchange-server-2013/management-administration/exchange-2013-office-web-apps-server-integration.html
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

.DS_Store files on USB thumbdrives - a way to stop them from being created?

Hello!
Forgive me if this has been asked to death, but at school I need to copy homework files back and forth to the school's XP-based computers constantly. Because in any given day I usually update half a dozen files across the "homework" folder on my Powerbook, it's easier just to copy the entire folder (and its subfolders) to my 2-GB, FAT-32 formatted flash drive each night - all 500 files (and 150 MB). Of course, this also leaves hundreds of .DS_Store and ._filename files to clutter "Windows explorer" windows.
My question is how do I remove (and prevent creation of) these files selectively? I know that they are used by the finder to store thumbnails, spotlight comments, and labels. The big problem is that while I want to remove these files from the homework folder (and some other folders), I DO NOT want to remove them from a few other folders on the flash drive - which I use to make quick backups of files from my Mac.
I know that I can prevent OS X from creating them altogether with certain utilities, and I know that I can get third-party utilities that allow me to remove these files from flash drive and/or prevent the creation of the files for entire volumes, but is there something I can do to remove them from only certain folders?
Also, since I do not always know beforehand what directories I might make, I'd like to be able to create a "white list" of only certain directories (and their sub-directories)that won't be touched, while all others will have their ".DS_Store" and "._filename" files removed.
Finally, because I'm often a hurry when I go to copy files, I'd rather not sit there and run terminal commands or a program every time I copy a folder over to the flash drive. Is there some way to prevent them from being created in these certain folders altogether, automatically? An applescript or terminal command that I can program to run from the script menu perhaps? I don't mind opening a program or script, I just don't want to have to sit there manually removing the files.
Thanks,
-Dan

I had a similar problem awhile back and asked for help in the Applescript forum:
http://discussions.apple.com/thread.jspa?threadID=954738&tstart=0
Unfortunately the revised jive software formatting function here in the forums has totally messed up things like posted scripts. What you'll see in the scripts discussed is no longer what was there originally. I just now put a copy of the script I'm using up in zip format here:
http://homepage.mac.com/francines/.Public/CopyStrip2Fat.zip
Unzip and open in Script Editor to get some idea of what it is really supposed to be. The idiot formatting of the revised jive software has replaced some things with a carriage return, a semi-colon, and close quote, thus rendering some lines meaningless.
To see the source of the script I quoted, see this MacOSXHints thread:
http://www.macosxhints.com/article.php?story=20040726164957299
The script is in the comment by cougar718. You might take a look at other comments as well.
Francine
Francine
Schwieder

SDMI is being created instead of SDMJ

Similar Messages

Maybe you are looking for