SE1 install on Red Hat 4

I am very new to both Linux and Oracle. I have a Windows background. I need to install Oracle on Red Hat. I followed the quick install direction word for word. During installation I received Oracle net configuration assistant (Recommended), Oracle Database Configuration Assistant (Recommended) and iSQL* Plus Configuration Assistant (Optional) errors. When I retry a screen pops up with OUI-25031: Some of the configuration assistants failed.....
How do I begin troubleshooting this.

To check (logon as user that executing dbca) LD_LIBRARY_PATH in enviroment.
echo $LD_LIBRARY_PATHTo set LD_LIBRARY_PATH:
export LD_LIBRARY_PATHNote if you type this command to shell, this settings will be valid for that shell session only.
For permanent settings add that command to /home/<username>/.bash_profile and reload profile using . .bash_profileIf you want set that to OS global enviroment add that command (export) to /etc/profile .
Enviroment settings is included on site posted by Daljit...
Message was edited by:
Ivan Kartik

Similar Messages

Oracle 8.1.7 install on Red Hat 8.0 or 7.2

I have been trying to install Oracle 8.1.7 on both Red Hat 8.0 and 7.2 and have followed all the instructions as per the install documents as well as the
tips/tricks posted at various tech websites such as http://www.puschitz.com/ and so on. I am not able to get the installer to work because of the JRE.
I am getting an error which says - Java Runtime Environment not found at /bin/jre, though I have installed JDK 1.1.8 downloaded from www.blackdown.org
and followed all the required instructions.
Can someboby, please help me to get this to work.
Thanks
Chandra
P.S. BTW, I have successful Oracle9i installs.

These are installation instructions for Oracle8i (8.1.7) on Linux 7.2 (Your suggestions would be welcome).
1.     Login as root/password.
2.     Create the following groups.
a.     # groupadd osoper
b.     # groupadd osdba
c.     # groupadd osuser
d.     # groupadd oinstall
e.     # groupadd dba
9.     Create the user – ‘oracle’ with password as ‘oracle’.
a.     # useradd oracle –g oinstall –G osoper,osdba,osuser,dba (no spaces in between commas)
b.     # passwd oracle (when prompted, enter ‘oracle’ as oracle’s password)
Install the first set of Linux Patches:
(Remember all commands as well as folder-names are case-sensitive)
1.     Insert RedHat Linux CD2 to install the following patches.
2.     Close all GUI
3.     Open a terminal
4.     # cd /mnt/cdrom/RedHat/RPMS
5.     # ls compat*
6.     Three of these patches will be installed now:
# rpm –i compat-glibc-6.2-2.1.3.2.i386.rpm
# rpm –i compat-egcs-6.2-1.1.2.16.i386.rpm
# rpm –i compat-libs-6.2-3.i386.rpm
7.     # cd                (To get out of /mnt/cdrom)
8.     # umount /mnt/cdrom      (Unmount/Eject the CD to remove it).
Set up the Oracle Environment:
1.     Open a terminal window and connect as user – oracle:
# su oracle
2.     $ cd /home/oracle               (Mere $cd by itsel[i]Long postings are being truncated to ~1 kB at this time.

Dcnm install with red hat X11

Hello I would like to know if i can install dcnm for red hat with X11 forwarding ,
X11 is working ,
but I can't lauch .bin
here the result:
sh dcnm-installer-x64-linux.6.3.2.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
=======================================================
Installer User Interface Mode Not Supported
The valid UI modes identifiers are GUI, and Silent. By default installer will run in GUI mode. If you are running the installer in GUI mode, X windows resources should be available to display the GUI installer. It is not possible to telnet or ssh and install DCNM in GUI mode.
=======================================================
thanks for your answer,

Hi there,
teh file orainst is very much in the directory. All you have to do is.
1. set the PATH=$PATH:. in your .profile. This will ensure that can execute the files from the current directory.
2. cd to /mnt/cdrom/orainst
3. execute teh command orainst.
If you have still problem I am glad to assist you.
I have done my installation in RH5.2 , its fine, but RH6.1, I have problem
thanks
siva
[email protected]
null

How to start SQLPLUS in oracle 10g which install on Red Hat Linux AS 4

I install oracle 10g on Red hat linux enterprize AS 4. but i can not start SQLPLUS. I could not login to grid control. When installation, some agents installations are fail. what can i do? please help me out.

I install oracle 10g on RHEL 4. But error occure in cofiguration assistant.
following assistance not configured (which are recommended):
Oracle Net Configuration Assistant - fail
HTTP Server Configuration Assitant - skipped
Java Security Configuration Assistant - skipped
OC4J Configuration Assistant - skipped
Web Cache Configuration Assistant - skipped
Oracle Instance Configuration Assistant - skipped
Oracle Database Configuration Assistant - skipped
OC4J Instance Configuration Assistant - skipped
OPMN Configuration Assistant - skipped
Register DCM Plug-ins with EM - skipped
Application Server Control Configuration Assistant -skipped
DCM Repository Backup Assistant - skipped
Enterprize Manager Reposotory Creation Assistant - skipped
Log Details given about "Oracle Net Configuration Assistant" as
/usr/app/oracle_sw_owner/oracle/product/10..0/EM10g_1/oracle.swd.jre/bin/..
/lib/i686/native_thread/libzip.so : symbol errno version GLIBC_
Unable to initialize threads:cannot find class javalang thread not define in file libc.so.6 with link time referance (libzip.so)
could not create Java VM
configuration of assistant "Oracle Net Configuration Assistant" fail
When try to run sqlplus from xterm, it gives an following error :
$ /usr/app/oracle_sw_owner/oracle/product/10.1.0/EM10g_1/bin/sqlplus
Message file sp1<lang>.msb not found
Error 6 initializing SQL*Plus
After installation there is an information is given for Enterprise Manager Grid Control and it gives an url as http://localhost.localdomain:7777/em. But when i try to connect it gives an error massage as "The connection was refuse when attempting to contact localhost.localdomain:7777"
Same situation when i try to connect Enterprise Manager Application Server (its url: http://localhost.localdomain:1810). It gives an error massage "The connection was refuse when attempting to contact localhost.localdomain:1810"
What can i do in this situation? Please help me out.

Install on Red Hat Linux

I've tried for some while now, to install Sun One Studio 4 on my Red Hat Linux, but it always hangs when it comes to the screen saying "Installing....This might take a few minutes". And it hangs for hours, so it's not that I don't wait long enough.
I have tried loging in as a normal user and as super user, but never get it right. I've checked that the DISPLAY setting is set to DISPLAY=:0.
Can anyone help me?
-Trond

Hello Trond!
I had the same problem a few months ago.
I solved it by running the install program
with a previous JDK (I think it was 1.3),
then when install finished I ran it with JDK1.4.2.
You can use symlinks to achieve this.
If it not works, look at your /tmp directory,
it will contain the install jar file,
run it: java -jar /tmp/... .jar
Hope it helps you.
regards
Franz

Install problems - Red Hat 5.2 and Oracle 8.0.5.1

I am trying to install Oracle 8.0.5.1 on 200Mhz/48Meg Intel Pentium system with RedHat 5.2
As I'm rather new to Linux, I decided to find a thorough description of the installation procedure and have used the one on:
http://jordan.fortwayne.com/oracle/rh5x.html
However, when I get to the point where I should start ORAINST, the system tells me it cannot find the file.
What can I do?
null

Hi there,
teh file orainst is very much in the directory. All you have to do is.
1. set the PATH=$PATH:. in your .profile. This will ensure that can execute the files from the current directory.
2. cd to /mnt/cdrom/orainst
3. execute teh command orainst.
If you have still problem I am glad to assist you.
I have done my installation in RH5.2 , its fine, but RH6.1, I have problem
thanks
siva
[email protected]
null

9i install on Red Hat 8.o

install was Ok up to one error --
Error in invoking Target install of --
makefile/usr/oracle/ctx/lib/ins_ctx.mk
I chose IGNORE , and the install finished with no more problems , INSTALL SUCCESFUL at end
At the end, the EMC came up and worked ok .
However after rebooting, The EMC would not work, From $ oemapp console .
I set the shmmax to 2147483648, and The DISPLAY , ORACLE_HOME , ORACLE_SID etc.
( is it possible that when rebooting the database is NOT STARTED, if not how
would it be started in linux)
Help please!!

http://www.puschitz.com/OracleOnLinux.shtml

Application Server 10g R2 install in Red Hat Enterprise Linux 5

Hi all,
We want to install Oracle Application Server 10g Release 2 under RHEL 5. We know it isn't certified yet, but it's necessary to install in that OS.
My question is if anyone knowns a good guide to install that OAS version in that plataform?
Thanks to all

the manuals are fine.

10.2.0.1 install, linux Red Hat 4 fails on Oracle Config Asst ORA-27102

INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = /oracle/ora10gr2/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -gdbName orcl -sid orcl -sysPassword 053d3e43dd32524082f71c639091631d49 -systemPassword 053d3e43dd32524082f71c639091631d49 -sysmanPassword 05b00420ddf1177c1f3b07b25fae5c1679 -dbsnmpPassword 05b00420ddf1177c1f3b07b25fae5c1679 -emConfiguration LOCAL -datafileJarLocation /oracle/ora10gr2/assistants/dbca/templates -datafileDestination /oracle/oradata/ -responseFile NO_VALUE -characterset WE8ISO8859P1 -obfuscatedPasswords true -sampleSchema true -oratabLocation /oracle/ora10gr2/install/oratab -recoveryAreaDestination NO_VALUE
Command = /oracle/ora10gr2/bin/dbca has failed
INFO: Configuration assistant "Oracle Database Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /oracle/ora10gr2
Configuration directory is set to /oracle/ora10gr2/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/oracle/ora10gr2/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
The error on the screen shows an ORA-27102 Out of Memory. This is confusing the machine has 8gb of memory and there is nothing running on it accept the install. My shmmax is set to 4180670464.
Any ideas would be greatly appreciated.
Thanks,
Kim

I too am failing on this.
# /sbin/sysctl -a | grep shm
# /sbin/sysctl -a | grep shm
# /sbin/sysctl -a | grep shm
# /sbin/sysctl -a | grep sem
# /sbin/sysctl -a | grep file-max
# /sbin/sysctl -a | grep ip_local_port_range
# /sbin/sysctl -a | grep rmem_default
# /sbin/sysctl -a | grep rmem_max
# /sbin/sysctl -a | grep wmem_default
# /sbin/sysctl -a | grep wmem_max
vm.hugetlb_shm_group = 0
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 2147483648
vm.hugetlb_shm_group = 0
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 2147483648
vm.hugetlb_shm_group = 0
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
Any ideas?
TIA!

Problems installing on Red Hat AS 2.1

Having looked through recent posts regarding installation it seems that most installation problems have been resolved quite easily. We've been struggling for several days to install the software. The installation terminates with the error: "Error in invoking target 'install' of makefile '/home/oracle/ora9iasInf/sqlplus/lib/ins-sqlplus.lnk'".
We have upgraded the kernel package to 2.4.9-e.25smp and binutils to 2.13.90.0.2-2, but the pre-installer checks reports an error that binutils 2.11.90.8-13 is missing. Continuing with the install just produces the link error.
If anyone can provide any help it would be grately appreciated.

responding to myself, you can find that version of binutils in metalink: Patch 2414946

Installing oracle 10g R2 on Red Hat AS4 update 6

Has anyone been able to get 10g R2 to install on Red Hat AS 4 u6?
I have had errors on both the 64 bit version and the 32 bit version.
32 Bit Version
The 32 bit version useing the 32 bit version of oracle 10g r2 (10.2.0.1) displays this error: Enterprise manager configuration failed due to the following error - Invalid value null for parameter PORT.
The log states:
CONFIG: SQLEngine connecting with SID: murasaki, oracleHome: /opt/oracle/product/10.2.0/db_1, and user: DBSNMP
May 2, 2008 8:56:11 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
May 2, 2008 8:56:11 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Invalid value null for parameter PORT
Refer to the log file at /opt/oracle/product/10.2.0/db_1/cfgtoollogs/dbca/murasaki/emConfig.log for more details.
May 2, 2008 8:56:11 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Invalid value null for parameter PORT
at oracle.sysman.emcp.ParamsManager.checkParam(ParamsManager.java:2630)
at oracle.sysman.emcp.EMDBPreConfig.checkConfigParams(EMDBPreConfig.java:1285)
at oracle.sysman.emcp.EMDBPreConfig.checkParameters(EMDBPreConfig.java:1060)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:174)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
at java.lang.Thread.run(Thread.java:534)
64 Bit version
The 64 bit versions spits out unable to make "install" various different files anywhere between 62% to 68% completed.
unfortunately i dont have more information on the error at this time. I have all the development packages installed.
any help would be greatly apreciated as i am getting no where with google and searching various forums.

Please check on this link.. that may help you.
http://www.puschitz.com/InstallingOracle10g.shtml
--Girish

Help with installing pre-requisite packages on Red Hat Linux

Having issue with installing packages with yum
OS is RHEL 6 and following package which are prerequisites for Oracle Fusion Middleware install on Red Hat Linux 6
uname details as follows
2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
Example error: yum install gives error as follows for all packages.
No package compat-libcap1-1.10-1 available
Need to install following packages (as mentioned in the prerequisites)
binutils-2.20.51.0.2-5.28.el6
compat-libcap1-1.10-1
compat-libstdc++-33-3.2.3-69.el6 for x86_64
compat-libstdc++-33-3.2.3-69.el6 for i686
gcc-4.4.4-13.el6
gcc-c++-4.4.4-13.el6
glibc-2.12-1.7.el6 for x86_64
glibc-2.12-1.7.el6 for i686
glibc-devel-2.12-1.7.el6 for i686
libaio-0.3.107-10.el6
libaio-devel-0.3.107-10.el6
libgcc-4.4.4-13.el6
libstdc++-4.4.4-13.el6 for x86_64
libstdc++-4.4.4-13.el6 for i686
libstdc++-devel-4.4.4-13.el6
libXext for i686
libXtst for i686
FYI: If this forum is not appropriate please let me know appropriate forum and shall repost there.

Hey,
Normally I use YUM : http://taliphakanozturken.wordpress.com/2012/03/17/how-to-use-yum-to-install-rpm-packages-with-dependencies/
Let me know if this is what are you looking for.
I hope it helps you,
Thiago Leoncio.

Oracle Forms (11.1.2.2.0) is supported on RED HAT 7

Hi, all...
I need know if Oracle Forms (11.1.2.2.0) is supported on RED HAT 7, in certmatrix, the RED HAT 6 is supported, if I install in RED HAT 7, Oracle supports the product?
Thank you.

This forum is dedicated to support the Oracle Maven Repository and related Maven functionality and therefore, are unlikely to find answers to your Oracle Forms-related questions here. However, if the certification matrix does not explicitly list RHEL 7, that means that it has not been certified to run on RHEL 7.

X4200 with Red Hat Linux - Network not coming up

I have a new X4200 with a fresh install of Red Hat. I have eth0 configured with static IP and iptables disabled. When I connect the Ethernet cable between server and switch, I get link LED and activity LED. However, I can ping anything on the local network or ping the server. Mii-tool reports "no link". I can ping the locally and the loopback.
I have tested the cable and switch port with another computer and connectivity is fine.
Anyone have any idea what could be wrong?
Thanks.

You didn't specify which port you connected to on the x4200.
Note that RedHat considers Net2 to be eth0, and Net3 to be eth1 (for which it loads the e1000 driver (intel). The Net0 and Net1 interfaces are Nvidia ports, for which RedHat does not have a default driver.

Dell 1950 power-edge III gen, key board and mouse stop after reboot using F1 key--Red hat 6.0

I am trying to install OS (Red hat 6.0) in Dell 1950 power-edge III gen, After booting CD i got option to hit F1 to install or let is continue to start the installation process. now screen goes to next step and key board and mouse stop working . it stop me from further step. Please help
Sam

Try booting to our live image and see if that lets you use the mouse and keyboard. http://linux.dell.com/files/openmanage-contributions/omsa-71-live/

SE1 install on Red Hat 4

Similar Messages

Maybe you are looking for