Search for [Remote Key] and [Remote System] in Data Manager
Hello all
I would like to be able to search on the remote key and the remote system in the MDM Data Manager is that not possible? I thought I remembered seeing that possibility under the Free-Form Search but now I can't find it.
I have, however, found this in the Data Manager reference guide:
REMOTE SYSTEM AND REMOTE KEY FIELDS
MDM uses the remote systems defined in the Remote Systems table
within the MDM Console to store and maintain key mapping information
for each record or text attribute. It does this using a virtual key
mapping field that you never see in the MDM Client.
This virtual key mapping field is very much like a qualified lookup field
into a virtual key mapping qualified lookup table.
Key Mapping information stored in virtual lookup field
The Remote System and Remote Key fields are normally not visible;
however, they do appear in several places in the MDM Client.
Specifically, both fields: (1) appear in the File > Export dialogs in Record
mode for exporting value pairs; (2) are recognized by the File > Import
dialog in Record mode for importing value pairs; and (3) appear in the
Edit Key Mappings dialogs in both Record mode and Taxonomy mode,
for viewing and editing value pairs.
Is there any way to search on the value in the remote key from the Data Manager?
Not sure search i think not possible.
But you can see keys as mentioned:
Enable Key mapping in Console.
MDM Client maens MDM Data Manager.
They do appear in several places in the MDM Client or Data Manager. Three different methods to see in DM are given already below:
Specifically, both fields: (1) appear in the File > Export dialogs in Record mode for exporting value pairs; (2) are recognized by the File > Import dialog in Record mode for importing value pairs; and (3) appear in the Edit Key Mappings dialogs in both Record mode and Taxonomy mode, for viewing and editing value pairs.
BR,
Alok
Similar Messages
-
Search for records by Remote Key or Remote System in Data Manager
Hi all,
We have a requirement to search for records by Remote key and/or Remote System at the main table level. Is it possible to do this using the Data Manager? If so, how?
Thanks in advance!
Lavanya.Hi,
I crosschecked with MDM 5.5 and Don't think it is possible through Data Manager. How ever using APIs you can search records using remote key/ remote system.
Regards,
Shiv -
Key genaration for remote system
Hi,
I want to genarate number ranges for remote system like
a100 to z999.
But in Console its allowing me to enter only numaric values only.
could you please suggest me to achive this functionality.
Thanks in Advance.
Kiran.GHi Kiran,
I want to genarate number ranges for remote system like
a100 to z999.
But in Console its allowing me to enter only numaric values only.
could you please suggest me to achive this functionality.
If in Console, you are not able to put in Alpha numeric Numbers, then I can suggest you a workaround.
If you want to get the range a100 to z999,
then only take the numeric part in the range.
Try using an Assigment in the Data Manager. And Concatenate the Alplanumeric part to the numeric part.
I am not sure, whether it will work. But still try out.
Hope it helps.
Thanks and Regards
Nitin jain -
Create entry for remote system necessary?
Hello,
is it necessary to start in CEN transaction RZ21 u2192 Technical infrastructure u2192 Configure Central System u2192 Create entry for remote system.
What is the result of this transaction and why is a <sid>adm user needed?
ThanksHello,
I take you mean you have a JMS queue created in an Oracle database (A) and you want to propagate messages to a JMS queue create in an Oracle database (B)?
If that is the case you use normal AQ propagation. You can follow <Note:102771.1> as an example changing the ADT as appropriate, etc.
MGW is only to be used for Oracle to 3rd-party propagation.
Thanks
Peter -
Central autoreactions for remote systems (saprouter)
Hi, Experts!
There is a possibility to define the central autoreactions for remote systems connected to Solman through SAPRouter??Hi,
The CEN Configuration is dependant on the CCMS agents that you install on your satellite system.
The CCMS agents run as Services at OS level.
When you install CCMS Agent, there will be parameters pertaining to connecting to CEN.
Hope this solves your problem.
Feel free to revert back.
-=-Ragu -
Can ZEN look for registry keys and modify them?
I found some registry keys I need to change. But they are in the HK_USERS
section of the registry which will be different on every PC. Can I make ZEN
search for the key name and change it fi found?
[HKEY_USERS\S-1-5-21-2238441965-2819776847-193749584-1006\Software\Novell\GroupWise\Address
Book - User Interface\RFQ Options]
"Auto Delete Enabled"="Yes"
"Save Received from Internal"="No"
"Save Sent to Internal"="No"
"Auto Delete - Amount"=dword:00000001
"Auto Delete - Units"="Weeks"
[HKEY_USERS\S-1-5-21-2238441965-2819776847-193749584-1006\Software\Novell\GroupWise\Address
Book - User Interface\Search Books]
@="Selected List, Manual RFQ"
"AB.4E6F76656C6C47576162703139393500.Novell GroupWise Address
Book"=dword:00000000
"AB.0081D836918BCE1187EB00805FB4B2BE.Frequent Contacts"=dword:00000001Robin Witkop-Staub,
> I found some registry keys I need to change. But they are in the HK_USERS
> section of the registry which will be different on every PC. Can I make ZEN
> search for the key name and change it fi found?
But they should be the same for CURRENT_USER. Ie HKEY_USERS is just all users'
keys.
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2195 -
I can't seem to figure out why I can't delete and redownload my apps. I'm very confused. I've tried turning my phone on and off, and doing a soft reset.
Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck! -
Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.
Does the device get any signal?
Sounds like the device may have had a hardware failure. If it is out of warranty, the only option is the Out of Warranty replacement.
AppleCare is only an option if it is still under the original warranty. -
As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.
If someone is calling me during that time it says mobile is either switched off or outside the coverage area.
Please helpYou may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427
-
Why does Maverick mail no longer search properly?
I used to search for a name and it would find it in One or All mailboxes. Now it sometimes works, but mostly not. Any solutions?I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
Still hoping someone out there can help me.
thanks,
anne -
Searching for missing files and damaged photo icon
I am trying to view photos that I have viewed in this program numerous times before but now when I click on the photos, I get a message that says "searching for missing files". Sometimes, the photo appears with a red icon below it that resembles a wripped photo. Does this mean my photo has been damaged by the program?
I too have been told to find them on my hard drive but still nothing comes up, I can find the picture name and then do a search, but nothing. I've tried several times and it just keeps saying seach for missing files not found. I can see my collection of pictures, but there blury and then when I try to click on them, it says searching for missing file and it gives me the file name, and then I've tried to go under my search and put that file name in and nothing comes up, I also got NO help from adobe and they want us to buy more products??? They could have warned us somehow on what happens if you move them or try and put them on disc, and that's what happen, I put some on disk or at least thought I did and then realized I didn't want to do that, so I hit the UNDUE and I guess it was so late or something, cuz I can see the pictues, just can't open them. I'm wandering if I need to have a expert see if he can get them off of Adobe, I really want the pictues I have graduation pictures on there and need them very much. Would love to have help from anybody. Please.
Thank you
K -
There is no PSA for InfoSource 8ZCCA_O09 and source system BWPCLNT800 RSAOD
Hi All:
We make a Heterogeneous system copy of BW 3.5. from Solaris 9-Oracle 9i to AIX 3.5-Oracle 9i.
We must have to rename the Logical System Name and during the Functional Testing the users configured the conections again in RSA1 transaction, then they start the
testing phase but get the next error in the Monitor-Administrator Workbench:
"@5C@ 28.02.2008 19:59:31 There is no PSA for InfoSource
8ZCCA_O09 and source system BWPCLNT800 RSAODS 203"
We can see that the errors refers to the old (BWPCLNT800) Logical
System Name; during the configuration of the RSA1 they renamed the
Logical System Name of the BW System to BWNIUSA800.
We found the SAP Note 518426 but we are not sure about if we can
execute it without affecting the system or the configuration.
Some one Can help us ?.
Best Regards
Reynaldo Rebolledo.Hi Reynaldo,
this forum here is related to SAP NetWeaver Master Data Management. Your question seems to be related to SAP BI. Please raise your question in the [BI Forum|/community [original link is broken];, because I do not think that you'll find the experts to answer your question here.
BR Michael -
No PSA for Infosource X and source system Y. Here Y is the flat file source
Hi,
We are facing an issue while transporting from dev s/m to quality. There is no PSA for Infosource X and source system Y. Here Y is the flat file source system this issue we are getting while transporting transfer rules.We are checked in OSS notes 518426. Its not helpful.
Thanks
ManjulaHi
Try RS_TRANSTRU_ACTIVATE_ALL (SE38).
You may also check SAP Note 861890 - ODS tables disappear during the upgrade -
and activate all ODS Objects before the upgrade and run the program RSDG_ODSO_ACTIVATE.
also that with Stack 14 an extended version of this program is available together with the
Program RSUPGRCHECK. If errors occurs, consult also SAP Note 518426 and run transaction
RSSGPCLA for the regeneration of the RSDRO_* Objects.
Recheck whether you have Exported with correct parameters or not -- Try to Re Export the Same with all necessary objects .
Try Note 524554 and 325525 also
Hope it helps and clear -
When I try using Migration Assistant an error appears on my pc... "An error occurred while preparing your information for transfer." My mac just continues searching for the pc and yet both are on the same wifi. I'm not getting anywhere! Please help!!!
Simple...
http://www.apple.com/uk/support/mac/app-store/contact/ -
My mac says that it has 40 gb of movies on it but when i finder search for file size, and for file type it gives me no videos or movies. I have called apple 3 times and each time they do the same thing and then do something that takes awhile to finish so we hang up and then it never works.
Please Helpeach time they do the same thing
And what thing might that be?
Maybe you are looking for
-
I loaded the latest OS X software and I keep getting an error indication when I put in my password. If I shut it down completely and reboot it goes to a page with my login and guest login. If I click on my picture I enter my computer. I try to res
-
PL/SQL report export to csv
Hi, If you create a pl/sql report there is no option to create a csv. I need that functionality on my page anyway. Is there a way of programming this? Perhaps there is a export_to_csv api?
-
Old previews bogging down hard drive backups
When I backup my hard drive to another hard drive, using Vica-Versa software, there are often lots (thousands) of older LR preview files that need to be deleted off the backup drive. With Vica-Versa the entire process just bogs down and can take for
-
An hour ago, I accidentally deleted a Bookmarks folder, and all of subfolders and hyperlinks. The lost items are not in "Trash." Are they still retrievable? JAW
-
Errors in java SP19 deployment with SDM
hi all when i deploy the java SP19 with the SDM i get this 2 errors with SAP_jTECHS (xml_das_connector_init) and SAP_JTECHF (XML_DAS_Init): May 17, 2007 10:15:46... Info: Starting: Update: Selected development component 'tc/TechSrv/xml_das_connector_