Search Help of compounded char in Screen Painter

Hi,
I have attached the standard search help /BI0/OGL_ACCOUNT to the G/L account input/output field in screen painter. While executing when I press F4 it gives the pop up message showing chart of accounts (Compounded) and G/L account characteristic values. But when I select single line it shows chart of accounts in the input/output field instead of G/L account. Could you please tell me why is it so and how can it be corrected if I want G/L account values in the input/output field.
Thanks,
Viren

how to change the search help of the WBS field VBAP-PS_PSP_PNR in the over screen tab.
Unfortunatly there is no search help for PS_PSP_PNR in VBAP.
I guess you need to create one elementry Z search help and finally tab it to  PS_PSP_PNR in VBAP by just enhacing the VBAP.
PS:But you need access key for same.

Similar Messages

  • Search Help for classification chars. based on external tbl within E.DMS

    Search Help for classification chars. based on external table or
    function moudle are not supported from E.DMS Gui.
    We would like to get F4 functionality like standard SAP Gui (select a
    value from a dynamic list of an existing SAP table).
    I have followed the instructions to the following note 903827.
    Is there any Idea?

    Hi,
    It seems like you need to go for C++ custom Addin  Devlopment.
    Regards,
    Anil.

  • How to add a search help for a field in Screen Personas?

       I just started learning to use a Screen Personas, and I want to know how to add a search help for a field.
       I found a property in the help document named "IsLookupSupported". Is it the key?  But I saw it was gray in the field I created, and its value is "false". I could not change it.

    Hi, Tamas,
    I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
    CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
    The correct code is like:
    CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
    Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
    Xin

  • F4 search-help in infoset query selection-screen fields

    Hi all,
    I created an infoset, and it's corresponding query, and now I need to associate F4 search-help in two of the selection-screen fields. Since they don't have any reference field associated (they are SAP standard table fields), there are no possible values available to select.
    How can I do this?
    I have already tried to use the "AT SELECTION-SCREEN OUTPUT" in the infoset, but I'm not able to do that. When I try to use the select-options generated by the query (SP$00013 and SP$00014) I have a syntax error with "Field not known".
    Can you help me? I never done this before, so I really don't have a guess.
    Thanks in advance.
    Beste regards,
    Sónia Gonçalves

    Hi all,
    I have found thread  that helped me a lot in this issue.
    I just have one more doubt: I created the selection criterion and I can already see it in the query selection-screen, but it's appearing in the top of the selection-screen, in a different area called "General data selections".
    Isn't it possible to include it in the "Report-specific selctions"?
    Thanks in advance.
    Best regards,
    Sónia Gonçalves

  • Searc help in entry help/Check tab vs Search help in Further Char-Data elem

    Folks,
    I have a screen field which is linked to a structure.When I look at that structure's entry help/check tab in se11 this field is having a collective search help.Now I want this to be replaced by a Z search help.
    If my understanding is right I need access key for this structure so that I can link the z search help in entry help/check tab against this field.
    My query is whic is the right way
    1.Linking the z search help in the entry help/check tab against that field in the structure at SE11 level
        or
        Linking the Z search help in Further Characterisitics tab of the data element used by this field.
    Either way the search help will be reflected at all the places wherever this field is available in the screen.Am I right ?
    or
    2. Linking the search help to a data element is different from linking the seach help to the field in that structure in entry help/check tab ? If they differ how do they differ.Kindly let me know
    Thanks,
    K.Kiran.

    Not true.
    Search help assigned at data element level is independent of that assigned at structure level, and the latter has higher priority. Please read "Input Help Hierarchy in the ABAP Dictionary":
    http://help.sap.com/saphelp_470/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm
    The structure level assignment can (and generally is) linked to more than one field, not only the one that triggers the search help. That depends on the search help importing and exporting parameters. The data element assignment can only affect the field in which it is used.
    Nevertheless, even the search help defined at structure level could be overriden in the program (e.g. PARAMETERS...MATCHCODE OBJECT, AT SELECTION-SCREEN ON VALUE-REQUEST, PROCESS ON VALUE-REQUEST, etc). If that is not your case, it's the structure assignment that you want to change (have into account that it will affect any other dynpros which use that structure).

  • Set search help dynamically to SAP Standard Screen

    Hi,
    I have one issue where I have to Create f4 help For a field present on SAP standard screen.
    Please advice how to do that.
    Can i dynamically set Search help in any screen-exit of the standard screen?
    Please help.
    Screen No is 130
    and Program is SAPLQM03.
    Here I want to attach a Zsearch help to a standard   FIELD RQM01-LS_KDPOS.
    Thanks,
    Ishani

    Hi Ishani,
    The field that you mentioned here in structure RQM01 is having a check table VBUP. So if some values are there in that table, then that will appear as F4 help to you. Consult with your functional and check how values are coming to this table VBUP. Othertahn this, I am afraid you will not be able attach any help.
    Regards,
    Abijith

  • Search Help error : Invalid field format Screen error

    Hi All,
    I have attached a search help to contract field for contract no and item number. (in my own screen developed in a  report)
    The search help picks up data and assigns it to the fields,
    But after this when I click on any other button, I get error saying :
    <b>Invalid Field Format (Screen Error) !!!</b>
    Any pointers guys !!!
    Warm Regards,
    Girish

    screen checks in abapautomatically checks for format of field when u enter data....i.e date, integer etc...the problem in this case is that when u seelct a value using the help it is filling a value which is not the correct format...so check for the data types and test it again...this is definitely the problem.

  • F4 help for date field on screen painter

    Hi ,
    I created a screen using dialog programming . I have a date field there which is defined as
    itab-date.
    The format for this field in Element list is DATS .
    How do i get a drop down on the date field on the screen .
    Please advise
    Thanks !

    In Report u have to add,
    TYPES: BEGIN OF TY_F4HELP,                  
              ENAME  TYPE PA0001-ENAME,
              PERNR  TYPE PA0001-PERNR,
           END OF TY_F4HELP.
    Data:   IT_F4HELP TYPE STANDARD TABLE OF TY_F4HELP WITH HEADER LINE.
    *Begin of add F4 in Parameter field Ename.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_ENAME.
      DATA: IT_RETURN_TAB TYPE ddshretval OCCURS 0 WITH HEADER LINE . " Return table for F4 help
      SELECT DISTINCT ename pernr
        FROM PA0001
        INTO TABLE IT_F4HELP.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          RETFIELD        = 'ENAME'
          VALUE_ORG       = 'S'
        TABLES
          VALUE_TAB       = IT_F4HELP
          RETURN_TAB      = it_return_tab
        EXCEPTIONS
          PARAMETER_ERROR = 1
          NO_VALUES_FOUND = 2
          OTHERS          = 3.
      READ TABLE it_return_tab INDEX 1.
      IF SY-SUBRC <> 0.
      ENDIF.
      IF sy-subrc = 0.
        MOVE it_return_tab-fieldval TO P_ename.
      ENDIF.
      CLEAR: it_return_tab.
    *End of add F4 in Parameter field Ename.

  • Regarding F4 help for text box in screen painter

    i am passing 4 valus in data element values tab, it is passing correctly to the text box, if i am making the text box to ouput only then the values and button for pop up is not comming, what do i need to do if i need values for output only.

    Hi Rocky,
    I think u can try out this.
    make ur textbox both input and output field and in PBO write
    loop at screen.
    if screen-fieldname = 'TEXTBOX'.
    screen-input = 0.
    endif.
    endloop.
    Regards.

  • Search Help Not show/display the data

    Dear All,
                  I have created a search help whith mannual itab of 4 entries. Itab is filled correctly, but when i see in the screen field it show the search help and display no record with the message 4 entries found; but I can't see the data.
    pls. guide me what can be the problem
    Thanks and Regards,
    Sohail

    Hi,
    If you want to Show the Search help for Particular Field in Screen painter , You must give the Code In PROCESS ON VALUE REQUEST(POV).
    ie.
    process on value-request.
      field P9611-REQ_STATUS  module GET_REQ_STATUS.
    and in Program Give the internal table Fieldname in Capital Letter while Passing in Fuctional Module.
    like.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'REQ_STATUS2'    "internal table field
          dynpprog        = sy-dynnr
          dynpnr          = sy-dynnr
          dynprofield     = 'P9611-REQ_STATUS' "screen field name
          value_org       = 'S'
        TABLES
          value_tab       = req_status_tab "internal table
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc  NE 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    With Regards
    Kesavaperumal

  • Import screen field value into search help assigned to a different field

    Hi,
    I have created an elementary search help based on a custom DDIC table ZSH_SHHLDR. Dialog Type: Dialog depends on set of values, search help parameters:
    Parameter                       Import     Export   LPos SPos  SDis
    FOLIO                                X                       1       1         X
    CERTN                                             X         2       2
    where FOLIO and CERTN are fields in my table.
    There are two fields in my program defined as like FOLIO and CERTN respectively. These fields are screen fields in a custom dynpro created using Screen Painter. The search help is assigned to the CERTN field. In the screen, I want that the contents of the FOLIO field should be imported into the search help, i.e. on the screen:
    FOLIO: 21353
    CERTN: <F4>
    When I click on F4 help for CERTN, I want that the FOLIO parameter in the search help should contain the value for FOLIO that I entered in the text box on the screen. Is there a way to do this, through an exit for instance? Help is appreciated, thanks.
    Regards

    Hi,
    You need to use the below statement.
    process on value-request.
    field zcom_doa_users-zzjob_role module sub_tes_module.
    Here I declared three fields in the screen fields from structure zcom_doa_users. Try to name the fields with table name-field name. So inside the module in structure zcom_doa_users you will get given value for the other fields also.
    Now you can do your own processing for f4 help.
    Thanks
    Subhankar

  • Assign search help for a screen field in standard program?

    Hi All,
    Is there any other way to assign search help to a standard SAP screen field? (to be precise i want to assign search help to Recipient field in table control of components tab in transaction IW32/IW31)
    I know we can do this by assigning search help through screen painter (by changing standard program, which is my last option).
    Any advice/help will be greatly appreciated.

    Hi,
    I think you will find solution in below <b>threads</b>:
    Re: Search Help for standard field
    How to assign a search help
    Search help for Standard SAP field
    <b>Reward if helpful</b>
    Rgds,

  • Adding search help (F4) for a screen field in standard screen of VA02

    Dear Gurus,
    I need to add a Search Help (F4) to a Standard Screen Field VBAK-VSNMR_V in the standard Screen of VA01/Va02.....Can anyone please guide me how it can be done.
    Regards
    Sajid
    Edited by: shaik sajid on Feb 2, 2009 8:38 AM

    Hi shaik,
    Refer to the following useful link:
    Search help enhancement in VA01
    Hope this will help you...

  • One search help for multiple select-options in webdynpro abap

    Hi,
    I need a way to use one search help for multiple select-options fields. My scenario is :
    I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
    If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
    If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
    I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
    I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
    However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
    I think I won't be able to use this way. What do you say?
    As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
    MY TABLE (ZBYYT080) CONTENTS:
    SID     VARBL     VALUE     LANGU     VTEXT
    ADS     $WERKS     1     T     Werk 0001
    ADS     $WERKS     11     T     OZYAS  GIDA URETIM YERI
    ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
    ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
    AGT     $WERKS     2301     T     KAMLI DAMIZLIK
    AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
    ADS     $VKORG     22     T     AA KİMYASALLAR
    ADS     $VKORG     8001     T     İINSAAT BOYALARI
    AGT     $VKORG     6500     T     DAMk St.Org
    AGT     $VKORG     5400     T     PANAR St.Org.
    I wish I'm clear enough..
    I will be gald if someone answers me as soon as possible...
    Thanks İn advance..
    MERAL

    Hi,
    Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
    Am I right ?
    If Yes, then in the interface IF_WD_SELECT_OPTIONS
    method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
    have importing param like I_VALUE_HELP_TYPE and  I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
    etc which may help you to link your create DDIC Search help to selection screen params.
    this is just a clue from my side. I haven't tried it myself.
    You can go to the where used list of this method and find some sample implementations which use these params.
    Hope this helps.
    Regards
    Manas Dua

  • Search Help with in a serach help required in SRM 4.0

    Hi,                                                     
    Requirement: Search help required for Product Category field in the Search help for Product(BBPH_PRODUCT) in SRM portal.
    This search help is used in Create shopping Cart transaction. The hyper link on Internal Goods/Services leads to the search help BBPH_PRODUCT. 
    My analysis:           
    The field Product Category (CATEGORY_ID) has search help(COM_CAT_HIER) attached to its data element. When I single test the search help BBPH_PRODUCT in SAP GUI,I can see the search help for field product category in the selection dialogue box. However the same does not appear on the corresponding screen in HTML.
    Please let me know whether I need to do some thing to make the search help appear on the HTML screen?
    With Regards,         
    Prakash Kamath

    Hi Prakash,
    I have the same problem but with another field. Unloading point. Could you please tell me how did you solve this problem with displaying F4 help on html/ SRM portal?
    Thank you very much.
    Best regards,
    Danijela ZIvanovic

Maybe you are looking for