Search result problem in material master (MM03)

When I use either of the default text searches provided in MM03 (Advanced Search for Material Using Search Engine or Quick Search for Material using Search Engine), I get correct results from the search.   However, the first column in the results table, Material code, is blank for all the records.  All the other searches work correctly, but these two don't return the Material code, which is obviously required for this to be an effective search. 
This seems like a bug.  Anyone else seen this?

ABAP team said it was an SAP problem and they needed to send a fix.  Started a call with SAP and they're saying it's something we did in configuring it.  I never configured it.  Wouldn't know where to go.
Is there configuration for the Advanced Search Engine?

Similar Messages

  • Problem loading material master (IS Mill) data from ECC to BI

    Hi Gurus,
    We have a problem loading Material master data from ECC to BI 7.0 SP 18.
    The scenario is :
    The ECC is with IS Mill... due to which the Material field MATNR is of length 40 instead of standard 18 characters.
    That is data element MATNR has 18 chars and its output length is 40 chars.
    When is table MARA browsed using SE16, the material with more than 18 chars.... shows only first 18 characters and are ended with !.
    OMSL setting shows length as 40.
    When the extractor checker runs 0MATERIAL_TEXT or 0MATERIAL_ATTR it gives correct output ..... which is more than 18 characters... not ended with !
    Till here no problem.
    On BI side, after replication of the datasource, i checked data element MATNR ... but it has length as 18 chars and output length as 18 chars.
    OMSL setting cannot be set more than 18.
    Infopackage has pulled data till PSA successfully. I checked the PSA data .... here to the material with more than 18 chars is ended with !.
    When the data is further pushed to 0MATERIAL infoobject, it throws following error for all materials irrespetive of its length (example below):
    0MATERIAL : Data record 768 ('SIT_PL_B01L_10_01!E '): Version 'SIT_PL_B01L_10_01! ' is not valid
    0MATERIAL : Data record 165 ('RLIRS52 E '): Version 'RLIRS52 ' is not valid
    Diagnosis
         Data record 768 & with the key 'SIT_PL_B01L_10_01!E &' is invalid in value 'SIT_PL_B01L_10_01! &' of the attribute/characteristic 0MATERIAL.
    System Response
         The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give  you more information on the error. This message refers to the same value, even though it does not state this explicitly.
    I did search for SAP note related to this... but could not find any.
    There is one SAP note (Note 960868) which mentions about this, but the correction was then shipped with BI SP 9.... we are running on SP 18.
    Requesting you all experts for help.
    Best Regards,
    Deepak

    Hi,
    follow bellow steps:
    1. you need to activate the Datasouce in BI side.
    Goto RSA1>  Datasource> Select Datasource> Double click> Check fileds and Activate.
    2. Replicate the Datasource into BI side.
    3. Check the RFC connections by useing SM59.
    Regards.

  • Problems in Material Master Upload by LSMW

    Dear Experts,
    The question was asked to me in interview, What Problems you face while uploading your material master data by LSMW ?
    Please give me some information on this question.
    Thanks in Advance

    hi,
    Check the link it would be usefull:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/c5/213c487a3c11d3bc8100105a6588b2/frameset.htm
    Hope it helps...
    Regards
    Priyanka.P

  • CRM Search Results Problem

    Hello ,
    I am facing one problem from past 3 days. in my SAP CRM System one user  can not see search results in CRP100 Inbox Search. CRM - Inbox search shows "no results found" when other users doing the same search get 17 pages of results.
    Please give me the desirable solution for my problem.
    Thanks in advance

    Hi Raju,
    In inbox search criteria, please clear all the search fields. Also check the Quick Search fields too. If still its not coming then it is a authorization issue. Check with your security consultant.
    You also can check it from ST01 transaction. It is same as ST05 SQL trace.
    Thanks
    Subhankar

  • Problem creating Material Master sales view with LSMW

    Hello experts,
    I have created a LSMW that uses the direct input program RMDATIND to create new material master records. These materials have different material types.
    I require fields from different views like Purchasing, Sales, MRP and accounting, among others. But not all the material types have all the view defined. I will like, if it's possible, use the same LSMW program to upload all the materials.
    The problem that I'm having if once I ran the program, I got the warning message "The data for the maintenance statuses V cannot be transferred", message no. MG161, and even the material is created the sales view is it not. I check all the sales data in my CSV file and looks good.
    I'm also having in some records, the warning message "The data for the maintenance statuses BG cannot be transferred". That indicate problems with the accounting view.
    As an extra information, I'm using the following structures BMM00, BMMH1, BMMH2, BMMH5 and BMMH7.
    Hope you can help me to solve this issue.
    Regards,
    Mairo.

    >
    > I'm also having in some records, the warning message "The data for the maintenance statuses BG cannot be transferred". That indicate problems with the accounting view.
    Each material type has its own set of views, e.g.  a FERT has sales views but no pruchasing view, a ROH has purchasing view but no sales view, a NLAG has no storage views and a UNBW no accounting views.
    This is defined in customizing of attributs of a material type.
    Because of this you have to make sure that you do not transfer sales data for a material type that does not have sales views.
    Which views you actually want to create is defined in field PSTAT. Each character stands for a certain view (defined in table T132)
    re:The data for the maintenance statuses BG cannot be transferred
    Are your matrials split valuated?
    if you want create accoutning data in MBEW table with MBEW-PSTAT having BG status, then you have to make sure that MARA and MARC PSTAT field also has the B and G .

  • Problem in Material master sales text update

    Hi,
      I have make the LSMW for uploading material master sales text update by using standad batch / direct input object 001 program /SAPDMC/SAP_LSMW_IMPORT_TEXTS  but as the formate of NAME required is as below
    Materila code  18 Char             SALES ORG 4 CHAR      DIS. CHANNEL 2 CHAR   total 24 char    but  in our system  some material code is only 6 CHAR  e.g  ABCXYZ   now when we pass the value for name
    ABCXYZ            SORGDC ,  it works  OK  we have to add blank spaces  between material code asnd sales organuization  so that total lenght of material should be 18 char  so is there any option  for this  insted of addin gblank spaces  because  for each material code lenght is diffrent  due to external number range .
    regards,
    zafar
    Moderator Message: Search before you post. If you fail to get an answer, type a question, spell-check it and post it here.
    Edited by: kishan P on Feb 16, 2011 4:47 PM

    from http://help.sap.com/saphelp_erp2005/helpdata/en/f4/b49e8c453611d189710000e8322d00/content.htm
    Text Entry Area 
    Type your text into the text entry lines. You can type continuously: SAPscript fills your text using a line length of 72 characters as soon as you choose ENTER or a function.
    To enter text in the line editor continuously, the checkbox Automatic tab at field end must be marked. For more information on setting automatic tabbing, see Setting Automatic Tabbing and Entering Text.
    Note that the line editoru2019s text filling has no influence on the final appearance of the text. Your text is formatted no earlier than at the time it is displayed or printed. For more information, see Previewing and Printing SAPscript Documents.

  • Problem with material master number range

    Hi,
    we have a problem with the material number range when stop the transaction of creation a material master data (MM01) the system has a jump of number range.
    Example  -> while creating a new material master the system gives me a number preview (46) but if I stop the transanction without save the master data the system doesn't give me the number 46 in the next master data but give me the next number 8in this example 47).
    It there a way for not have this jump of number range?
    Thanks!
    Gaetano

    Hi Gaetano,
                        This ia a standard thing..even I have experienced it.
    Regards,
    Chiranjib

  • Problem in material master upload using LSMW

    Dear All
    I am trying to upload material master using LSMW (batch input recording).
    I am facing problem while doing 14 step (Run Batch Input Session). When i'm running the batch input session, on the Create Material (Initial Screen), system picks values for material code, industry sector & material type but gives error message "select at least one view". system is not allowing me select the views which i selected while recording. system allows me to select all the view which i don't want.
    why system is asking me to select the views and also how to select the required view?
    thanks
    manoj gupta

    thanks charu
    do i need to do complete LSMW steps fpr all the view separately? if i do LSMW for basic view1, for other view do i need to go for change TCode or create T Code?
    thanks
    manoj gupta

  • Yahoo search results problem

    We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3 that works well. A replacement that I have had up but not currently using much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with Yahoo search results. If I point a workstation to the older NW6 BM it works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM then it will work fine in Bing and Google but in Yahoo it will return the results but when you click on any link there I get this message:
    Yahoo!
    Yahoo! - Help
    The requested URL was not found on this server.
    Please check the URL for proper spelling and capitalization. If you're having trouble locating a destination on Yahoo!, try visiting the Yahoo! home page or look through a list of Yahoo!'s online services. Also, you may find what you're looking for if you try searching below.
    Any ideas? I have no access rules enforced. Anything that might be of help would be greatly appreciated.....Thank you!

    I think this probably should be moved to the proxy portion of the forum - I am going to close this and start a new thread there. Sorry.....

  • Problem in material master

    How to change the group currency price unit in accounting view of material masters(MM01).Currently i am using BAPI_MATERIAL_SAVEDATA to create/update material master views.But there is no field in this BAPI to update the group currency price unit..please help..

    hui,
    its better for u do it with LSMW, which will allow u to do it quickly also.
    use BATCH INPUT method.

  • Problem in Material master creation

    when iam creating material master, in sales view1 maintained Tax claassification. After saving the master record the Tax classification is disappearing.
    could any one know the solution? please help me.

    Hi Preveen,
    Use the following path in Customizing for Sales:                            
        -> Functions -> Taxes -> Tax by country                                     
    If sequence value 0 is defined for a country, change it to 1.               
    If other tax categories are defined for the same country, increase the sequence value for all tax categories of this country by 1.             
    Important: If materials exist for which tax data has already been  maintained in the country in question, this tax data must be  checked and, where necessary, modified using the "Change material" function.  (Note that tax data is saved in table                MLAN for each material and country.)                                                                               
    Regards,
    Mauro

  • Problem in material master LSMW - Classification view

    Hello all,
    I have created LSMW for material master upload with standard input method. Material is getting created thr's this, but 'classification view' is not getting created only for some material groups. Functional consultant is saying that there is no such configuration exists in system regarding material groups.
    Plz advice how to resolve this?.
    Regards,
    Aparna Gaikwad

    I giveup now
    You close my all doors by saying "All views r needed".
    Now i would suggest if any help you can take
    Expert Forums » SAP Solutions » ERP - Logistics Materials Management (MM)
    There definatly you would be able to find some alternate solution.
    Cheers
    Amit.

  • Problem with material master

    HI
    I am trying to change the material master profit centre but the system is giving me the error message
    You want to change the profit centre but there are still material stocks
    So Kindly help me with this
    This is little urgent

    u cannot change the mmr if there is any stock exist,any open orders (mm,sd,fi) exist.
    to chage the mmr u have to make the stock zero and also close all the open orders.
    solution is either create a new material.
    or u can create a dummy material codethen transfer the stock to the dummy material code-close all the open orders-change the profit centre in the original material code-then again transfer the stock from the dummy material code to the original material code and delete the dummy material code.
    regards,
    indranil

  • Problem with Material Master Data Upload using MM01?

    Dear Abapers,
    I done recording for uploading Material Master using MM01. I selected respective views at the time of recording. Then at the time of uploading it is not selecting the Quality view and Account1 view. Even I used 'P+' function code. it is working but not selecting the 2 views. Manually, if I select those 2 views uploading successfully.
    Could you please let me clear on this issue?
    Regards,
    Sekhar

    Hi Chandrasekar,
      Scrolling in the view-selecting screen wont be recorded during SHBD ( Recording ).So you need to first select Basic data1 rather than Accounting 1 or Quality management.Once you are in the basic data screen, fill the required description( if its unavailable ) and then choose the accounting 1 or quality tab.Do a fresh recording with the above approach, your issue should be solved.
    Regards,
    Kiran
    Edited by: Kiran NN on Feb 29, 2008 11:02 AM

  • Problem with Material Master upload

    Hi All,
    I want to know what the file MTVFP( Group Check Availability) filed gonna do in material master upload bapi "BAPI_MATERIAL_SAVEDATA". When i am trying to upload data i am getting the following error "The field MARC-MTVFP/BAPI_MARC-AVAILCHECK is defined as a required field; it does not contain an entry".
    Thanks

    Hello Ben ,
                    I am getting the same error , could you please let me know how you got it solved.
    Comradely ,
    K.Sibi

Maybe you are looking for