Searching Multiple Exchange Accounts in Outlook 2010

Hi
After upgrading to Outlook 2010, one of my users can no longer search multiple exchange accounts. Here is the background. The user is an administrative assistant for 2 partners. She has full permissions against their mailboxes. Their
accounts show up under her Outlook profile and she can access all the mail, calendars, etc. However, when she searches, she only gets results back for her mailbox. She needs to be able to search and get results back from the partners mailboxes
as well. Is there a setting we are missing?
Thanks,
Ron Soulliard
Systems Administrator
Polaris Ventures.

Hi,
It seems to be an issue fixed by the updates. Make sure you have patched Office 2010 SP1 and have the programs up to date on the assistant's computer.
Best regards,
Rex Zhang
TechNet Community Support

Similar Messages

Unable to configure multiple Exchange accounts in Outlook 2013

This is a complicated issue so I will try to describe it the best I can.
I have a client with two SBS servers for two different organizations in two different locations. Each server handles completely different domains. Let's call them A and B.
The issue is this...using Outlook 2010 or 2013 on clients at location B, I can configure Outlook for the users mailbox on server B just fine. Some of the users at location B also have mailboxes on server A. When I add a 2nd Exchange account for
the users mailbox on server A, things get weird.
Sometimes, when I start Outlook after adding the 2nd Exchange account, Outlook will show only one mailbox, but it is incorrect. The top level will show it is a mailbox on server B, but it contains email from server A. When this happens, email
actually transfers from one mailbox to the other. I have to close Outlook quickly before things get out of hand. About a year ago, I determined that if the user has the same username and password for their mailbox on server A and server B, this would
cause the problem. So I changed the users' username on server B and it seemed to work with Outlook 2010.
Now, a year later, we have a new user with Outlook 2013 with a mailbox on server A and server B, who works in location B. I setup Outlook 2013 with mailbox B and it's fine. I add a 2nd Exchange account for mailbox A to their Outlook Profile,
and when I launch Outlook, it shows both. BUT, the mailbox A has nothing in it, and the status shows "This folder has not yet updated. CONNECTED". Mailbox B shows "All folders up to date. Connected to Microsoft Exchange".
Also, existing email from mailbox A starts showing up in mailbox B. If I go into mail account settings, I get the "Outlook is using temporary mailbox" dialog, meaning something has moved. If I look at the two accounts, both look
to be using the same OST file, even though under data files, there are two OST files, one for each mailbox account. If I delete the 2nd Exchange account (A), Outlook works again for the single mailbox on server B.
I've tried configuring the accounts without cached mode, but that doesn't work either. Mailbox B had a delegate account (Full access permissions) to another account on server B, but I have tried removing that also, but no change.
I cannot figure out why I cannot have two Exchange accounts, one from each server (A and B) in Outlook 2013/2010 at the same time.
HELP!
Thank for any ideas. I hope I haven't made this too confusing. One last thing...when I add the 2nd Exchange mailbox, I authenticate with the username on server A with domain\username and their password. The authentication seems to be accepted
fine and without error. I have also tried configuring the 2nd account using "automatic" instead of configuring manually. Same problem.

OK, I have done some more testing as you suggested. I created yet another new profile with just mailbox A. When I start Outlook, I see the users mailbox, plus a mailbox that the user has been given Full Permissions to (a delegate?). There
is one more mailbox that this user has full permissions to, but it did not auto-add itself, so I added the mailbox through the account properties. Now, all three mailboxes at location A are in Outlook (users mailbox and 2 delegate mailboxes). In
Outlook, on the left, has at the top the users main mailbox, and then below it are two other "branches" for the delegate mailboxes. I did NOT use cached exchange mode, btw.
I quit Outlook and edited the profile, adding another exchange account for the users mailbox at location B. I did a "check-name" and authenticated OK.
I launched Outlook, and the same (wrong) thing happens. On the left pane of Outlook, at the top, it shows it is the users mailbox at location B (the main branch says Mailbox name -- location B), but all the folders and content are from mailbox at location
A. Outlook has mixed it up, and it is at this point that email starts moving between mailboxes, so I quit Outlook quickly. It did show the two delegate mailboxes from location A, but there were just three "branches", and nowhere is there
the real mailbox B.
Can it have anything to do with the fact that these accounts have delegates (or are given full manage permissions to other mailboxes on the server)??
UPDATE: I just determined something. When looking at the Outlook email accounts dialog, for each account it shows the default delivery location. For the first account (location A), it shows:
"Selected account delivers new messages to the following location: usersemail@locationA\Inbox".
When I add the users mailbox for location B, it shows:
"Selected account delivers new messages to the following location: usersemail@locationB\Inbox".
However, when I start Outlook, and see that things are wrong and quit, I go back into the accounts dialog, and BOTH accounts are set to deliver to the SAME location:
"Selected account delivers new messages to the following location: usersemail@locationA\Inbox".
So now, the 2nd exchange account has changed it's location to deliver to mailbox A instead of B.
Crazy stuff.

Can't add multi exchange account on outlook 2010 with exchange 2013 Sp1

I did install exchange 2013 with DAG group successful, the exchange work fine now
Outlook can connect to exchange automatically and working fine
The problem appear when i need create the second exchange account by go to control panel/Mail add new profile and add new exchange profile
How can i solve the problem ?

This Problem in exchange generally appear when users mistakenly create the wrong account type or Outlook upgrades an older account profile.In these situations you need to remove that wrong account and create a New account .
When you have the wrong type of account configured in Outlook you can easily remove the account and create the correct type of account.
1 Go to Control Panel, search for the Mail. If you are using 64-bit Windows and 32-bit Outlook, it will be named as “Mail (32-bit)”
2 Double click on Mail (or Mail (32-bit)).
3 Click Email account button
4. Select the wrong account and click Remove. (If you only have one account listed in your profile,But you may need to create a New account first, set it as default then remove the wrong account.)
5. Click New, select Email Account for POP3 or IMAP accounts, or select other then the correct account type.
6. Fill in your preferred display name, email address and password on the Add New Account dialog.
Outlook will look for published account configuration for the domain and setup the account automatically.
In this event if your email provider does not publish autodiscover information, you’ll need to set up the account yourself. Check your mail providers support site for the proper configuration and then check the box to Manually configure the account at the bottom
of the Add New Account dialog.

False Signature is chosen, when i use multiple exchange mailboxes in Outlook 2010

Hi,
My Problem:
A user has his own Exchange mailbox and an additional exchange mailbox with full access permissions connected in Outlook 2010. I have made different signatures for every Mailbox.
Mailbox A is working properly. Sending and answering / forwarding works correctly with signature A.
When i send a mail with mailbox B, outlook uses signature B.
When i ANSWER a mail with mailbox B, outlook uses signature A.
The "from" button is highlighted on mailbox B. When i choose mailbox B in the from button manually, it works .....
Any idea?
Regards,
Dave

Hi,
I need to confirm one thing first, did you add Mailbox B as an additional Mailbox, or a second Account in E-mail list?
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Outlook 2010 - Multiple Exchange Accounts - Won't send from second account

I've setup multiple exchange accounts in Outlook 2010. I receive fine for both accounts, but cannot send from second account. Sent email goes to the Outbox and stays there.
I've tried going back to a second profile, and it works fine. Mail in Outbox from efforts above stay in Outbox. If I pull them up, I can resend with no issue.
I need to be able to send with multiple accounts in same profile to do other projects I'm currently working on. Any ideas???
Thanks,
Mike

I've setup multiple exchange accounts in Outlook 2010. I receive fine for both accounts, but cannot send from second account. Sent email goes to the Outbox and stays there.
I've tried going back to a second profile, and it works fine. Mail in Outbox from efforts above stay in Outbox. If I pull them up, I can resend with no issue.
I need to be able to send with multiple accounts in same profile to do other projects I'm currently working on. Any ideas???
Thanks,
Mike
I was able to fix this with Outlook 2010 Service Pack 1.
Another area that I had to change was the inbox for that other account I created a rule to put in the primary inbox folder (email 2).
After that the email was only checking one to send and recieve based on the highlighted account, so to resolved that I went to Send/Reveive Groups > Define Groups > Edit Account Properties and made sure they refresh every 1 minute(s).
solutions are not always answers

Outlook 2010/multiple exchange accounts/new mail notification on one only

Hi, is there a way to have multiple exchange accounts in Outlook 2010 but just have new mail notifications on the first only?
I tried having the first exchange account open an additional user, but running into memory errors as a result. Found the solution to that by adding them as separate accounts, but this creates noise with mail notifications, reminders, etc-
Thanks in advance - Joe

Hi,
You can configure multiple Exchange accounts in Outlook 2010. For details on how to configure, you can refer to this article:
http://blogs.msdn.com/b/outlook/archive/2009/08/25/multiple-exchange-accounts-in-outlook-2010.aspx
Also, only the default mail store will get the new mail icon. You can use rules to pop up a desktop notification for the other accounts but the icon will only appear
for the default account.
Best Regards,
Sally Tang
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]

Unable to add account to Outlook 2010 for email address under custom domain

I am unable to add a new account in Outlook 2010 for an email account set up under a custom domain.
Can anyone explain why login credentials that work for outlook.com (successful access to email inbox) return an authentication failure (401 error) when used to test connectivity via https://testconnectivity.microsoft.com?
Details:
I set up a custom domain at https://domains.live.com and did the following DNS configuration steps at my web hosting company following instructions from domains.live.com:
Created custom MX record
Created CNAME record [name:] autodiscover.jrergonomics.com [value:] autodiscover.outlook.com.
I created email addresses at domains.live.com > jrergonomics.com > Member accounts and tested by successfully logging in to outlook.com.
When I try to add either account to Outlook 2010, I get a popup box with this information:
Title: "Windows Security"
Connecting to [email protected]
[[email protected]]
[ ] Remember my credentials
[ OK ] [ Cancel
The credentials that I use successfully to log in to outlook.com don't work here; I get the popup box 3-4 times and then the Outlook 2010 Add New Account dialog displays an error:
"An encrypted connection to your mail server is not available. Click Next to attempt using an unencrypted connection."
Clicking Next results in an error message:
"Problem Connecting to Server"
I have tried verifying the connectivity using https://testconnectivity.microsoft.com:
<?xml version="1.0" encoding="utf-8"?>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to test Autodiscover for [email protected]." resultdescription="Testing Autodiscover failed." additionaldetails="" elapsedMilliseconds="40517">
<children>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting each method of contacting the Autodiscover service." resultdescription="The Autodiscover service couldn't be contacted successfully by any method." additionaldetails="" elapsedMilliseconds="40517">
<children>
<testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="21181">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 64.90.49.188" elapsedMilliseconds="146">
<children />
</testresult>
<testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&v=ExRCA.1&id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.
" elapsedMilliseconds="21035">
<children />
</testresult>
</children>
</testresult>
<testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover.jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="4982">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="376">
<children />
</testresult>
<testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&v=ExRCA.1&id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.
" elapsedMilliseconds="4605">
<children />
</testresult>
</children>
</testresult>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to contact the Autodiscover service using the HTTP redirect method." resultdescription="The attempt to contact Autodiscover using the HTTP Redirect method failed." additionaldetails="" elapsedMilliseconds="14148">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="21">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 80 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="59">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is checking the host autodiscover.jrergonomics.com for an HTTP redirect to the Autodiscover service." resultdescription="The redirect (HTTP 301/302) response was received successfully." additionaldetails="Redirect URL: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml

HTTP Response Headers:
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Location: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml
" elapsedMilliseconds="45">
<children />
</testresult>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="14021">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover-s.outlook.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.241.102, 157.56.232.166, 157.56.245.70, 157.56.245.166, 157.56.236.214, 157.56.236.6" elapsedMilliseconds="191">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 443 on host autodiscover-s.outlook.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="84">
<children />
</testresult>
<testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Testing the SSL certificate to make sure it's valid." resultdescription="The certificate passed all validation requirements." additionaldetails="" elapsedMilliseconds="248">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover-s.outlook.com on port 443." resultdescription="The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate." additionaldetails="Remote Certificate Subject: CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US, Issuer: CN=Microsoft IT SSL SHA2, OU=Microsoft IT, O=Microsoft Corporation, L=Redmond, S=Washington, C=US." elapsedMilliseconds="163">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Validating the certificate name." resultdescription="The certificate name was validated successfully." additionaldetails="Host name autodiscover-s.outlook.com was found in the Certificate Subject Alternative Name entry." elapsedMilliseconds="1">
<children />
</testresult>
<testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Certificate trust is being validated." resultdescription="The certificate is trusted and all certificates are present in the chain." additionaldetails="">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US." resultdescription="One or more certificate chains were constructed successfully." additionaldetails="A total of 1 chains were built. The highest quality chain ends in root certificate CN=Baltimore CyberTrust Root, OU=CyberTrust, O=Baltimore, C=IE." elapsedMilliseconds="34">
<children />
</testresult>
<testresult status="Warning" errorid="1339c33a-8f21-427b-a323-4cee1a13f517" contentUrl="" testdescription="Analyzing the certificate chains for compatibility problems with versions of Windows." resultdescription="Potential compatibility problems were identified with some versions of Windows." additionaldetails="The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled." elapsedMilliseconds="4">
<children />
</testresult>
</children>
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing the certificate date to confirm the certificate is valid." resultdescription="Date validation passed. The certificate hasn't expired." additionaldetails="The certificate is valid. NotBefore = 2/18/2014 11:41:01 PM, NotAfter = 2/18/2016 11:41:01 PM" elapsedMilliseconds="0">
<children />
</testresult>
</children>
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Checking the IIS configuration for client certificate authentication." resultdescription="Client certificate authentication wasn't detected." additionaldetails="Accept/Require Client Certificates isn't configured." elapsedMilliseconds="804">
<children />
</testresult>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to send an Autodiscover POST request to potential Autodiscover URLs." resultdescription="Autodiscover settings weren't obtained when the Autodiscover POST request was sent." additionaldetails="" elapsedMilliseconds="12692">
<children>
<testresult status="FatalError" errorid="6c458392-3a8c-4bc2-942e-7ab533744106" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml for user [email protected]." resultdescription="The Microsoft Connectivity Analyzer failed to obtain an Autodiscover XML response." additionaldetails="An HTTP 401 Unauthorized response was received from the remote Unknown server. This is usually the result of an incorrect username or password. If you are attempting to log onto an Office 365 service, ensure you are using your full User Principal Name (UPN).
Headers received:
RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c
X-DiagInfo: CH1PRD0910CA013
Content-Length: 0
Cache-Control: private
Date: Mon, 31 Mar 2014 04:57:26 GMT
Server: Microsoft-IIS/7.5
WWW-Authenticate: Basic Realm=""
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET


HTTP Response Headers:
RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c
X-DiagInfo: CH1PRD0910CA013
Content-Length: 0
Cache-Control: private
Date: Mon, 31 Mar 2014 04:57:26 GMT
Server: Microsoft-IIS/7.5
WWW-Authenticate: Basic Realm=""
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
" elapsedMilliseconds="12691">
<children />
</testresult>
</children>
</testresult>
</children>
</testresult>
</children>
</testresult>
</children>
</testresult>
</children>
</testresult>

Hi,
Since this is an Exchange forum and your issue is related to domain.live.com, I recommend you contact with domain.live.com support to get quicker and more professional help：<cite class="_Vc">https://domains.live.com/support/
</cite>
Thanks for your understanding in advance.
Best regards,
Angela Shi
TechNet Community Support

Office Small Business Premium 365 - Setting up multiple Exchange accounts

Can we set up multiple Exchange accounts on a single Outlook profile using Outlook 2013 (365 Full App)? We have an email subscription to O365, and we have another email account that's hosted with GoDaddy that's an Exchange account. I think it's
possible, but I'm being advised that it isn't reliable (or that it can't work). I found this TechNet article that seems like it
should work: http://technet.microsoft.com/en-us/library/ee815819(v=office.15).aspx However, I don't have OCT with O365 Small Business Premium, so I don't know how else to do this...
Any suggestions/advise? Thank you!

Seems like it is possible. I was able to add two exchange accounts (office 365 services) into Outlook 2013. I guess this is possible through Email Accounts (add New...). Thanks, Microsoft!

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
I am running Exchange 2013 and I have an end user who connects to it via Outlook 2010. All was going well till he went to forward an email and he noticed that the From button appeared and auto populated the sender's email address.
I have clicked the Empty Auto Complete List in Outlook's Send messages... still displayed the From tab when forwarding.
I recreated the profile in outlook... same thing.
I created the profile with outlook 2013... same thing.
There is only one user profile setup in Outlook.
(I know the from tab usually appears when you have multiple profiles setup in Outlook and/or when you configure the "From" tab.)
I opened the end user's email in Exch 2013's OWA... what was different here was when I clicked on the email and it opened, it did NOT have the Reply or Forward option... and it displayed as a "Draft" email.
Does anyone have any ideas?

So are you saying that the from button is filling the option with the original senders address (eg the person who sent the message to your user), or that it's filling in the your users address (in which case I don't understand what the issue is, since
it IS going from your user)?

Multiple exchange-accounts

Hi everybody
I have a gmail that contains all my personal e-mails, contacts and calender notes. I also have a work e-mail that contains alle my work related e-mails, contacts and calender note (meetings ect.)
Both accounts can configured as a "Mail for Exchange" which suites me perfectly. I have tried iPhone and Android and it works perfect with multiple exchange account - but Nokia C7 doesn't? Why?
I have googled this for some time without getting any good anwers. Some people says that raodsync does the trick but on the roadsync supportpage the developers state that rodadsync only support one exchange account at the time.
Can it be true that the largest cell-phone manufacturer in the world don't support this simple feature. iOS and Android does...
Please help me, I would like to switch to Nokia but this issue is a deal-breaker :-(
Sincerly yours
Skinkelynet_DK

Hi!
I'm googling now how to set up two exchange accounts on my 701 but it indeed seems it is impossible.
I have now an exchange active sync account for my company mail and calendar. Could you please help me how to sync my outlook.com calendar with my Nokia?
Let me know if this possible at least.
Thank you in advance,
cefi
Sweet home [localhost]...

Can' add Exchange account to Outlook 2013

Hi,
We have an Exchange 2013 server which as far as I know is fully working - Outlook clients on the domain connect fine, OWA works fine and mobile devices work fine.
However I have a problem when trying to add an Exchange account to Outlook 2013 when this computer is on another domain (separate network, separate domain, separate company).
I assume Outlook is searching for an Exchange server which isn't there but how can I get around this?
Thanks

Hi,
Please try to alter the authentication method on the relevant CAS servers to Basic and test the issue. For details:
http://technet.microsoft.com/en-us/library/bb124503%28v=exchg.141%29.aspx
Thanks,
Rebecca Tu
TechNet Community Support

Multiple Exchange accounts on iOS7

In iOS6, it was possible to have multiple Exchange accounts that each had their own calendar, and you could show both calendars with different colors. Now only the main account's calendar shows up.
Exchange + Gmail still shows up as two separate calendars, though, as do any other accounts.
Is this a known iOS 7 bug, a stripped out feature, or something no one has seen before? It's happening on a dozen pads & phones our company just updated, and the shared calendar is very important.

Further research has shown this isn't an iOS problem, it was the move to Exchange 2010 that caused the problem. It has a new default limit of 10 on shared sync connections.

IOS 4.0.1 Email Subfolder problem with multiple Exchange accounts

Hi folks,
Situation: iPhone 4, iOS 4.0.1, multiple Exchange accounts, corporate exchange server 2010
problem: Emails are of course organized into subfolders. However, my iPhone only displays NEW incoming Emails when they are sent to an accounts ROOT Emails folder. I can access the subfolders of each account using the "account:" buttons and read the mails - but thats useless since I dont have an idea WHICH folder of WHICH ACCOUNT received a new mail!
to me, that is definitely a bug - not a feature.
any ideas?

I cannot believe this is actually the case -- I'm experiencing the same problem and it's driving me nuts! Come on Apple; this needs to be fixed if you actually expect the iphone to become a real business device.

Problems setting up multiple exchange accounts with same user name

Hello,
I have two email addresses on the same exchange server at work that I would like to configure on my iPhone4 running iOS 4.3.3. I can setup the first email just fine but when I set up the second email iOS tells me " Cannot Create Account: An identical Exchange account already exists". Here is a working example:
[email protected]
[email protected]
username and password for both email1 and email2 are the same credentials. Am I getting this error message b/c the username for both accounts is the same? if so is there a workaround for it without having to change the username for one of the accounts?
Any help would be appreciated. Also, we are using Microsoft Exchange 2010.
Thanks

I'm having the same problem. From all the information I can find, iOS doesn't allow you to access multiple Exchange accounts using the same credentials. I'm not sure if this is a restriction of iOS or a restriction of Exchange ActiveSync.

Receiving multiple duplicate emails using Outlook 2010

I am receiving multiple duplicate emails using Outlook 2010. The email receiving, can go up to few hundreds copies. Not
all emails i receive will be duplicated. There is no common sender for those affected emails. Usually when i received email from my Outlook 2010 the email in Outlook Web Access will be gone. But this time round for those affected duplicating emails, it still
can be found in the Outlook Wed Access. Any solution for this problem? Currently
I would need to go into the Outlook Web Access to delete the affected email then the duplication will be stop. Or I would need to cancel the Send/Receive & restart Outlook. But this 2 method is only temporary solution. The problem will keep coming
back.

Dear Jeremycny,
I think you are working with a POP3 account and issue of replicated emails in Outlook is common in the case of POP3 connection. So, first of all uncheck the
“Leave a copy of messages on the server” option and see the results.
Also, see the TasK Manager, if there are multiple “Outlook.exe” are running under the
“Processes” tab, then end the unnecessary programs as each of them downloading the same email multiple times.
Apart from it, if there are numbers of factors behind the replication of emails in Microsoft Outlook such as:
Rules (Exploiated Rules)
Scanning Programs Integration
Damaged Outlook Profile
Robert’s have defined these bugs in a more profound manner in his blog, so take more help from the given source:
http://www.howto-outlook.com/faq/duplicates.htm
Note: Improve community discussions by marking the answers helpful otherwise respond back for further help.
Thanks & Regards
Clark Kent

Searching Multiple Exchange Accounts in Outlook 2010

Similar Messages

Maybe you are looking for