See the details...

Firefox 4 doesn't support my printer. How dumb is that? It's an HP4500, a pretty common one. I can't believe that a new version of Firefox suggests that I need to find a new printer driver -- what the hell have you done to your software. If I had provided a new version of old software to the Military that wasn't backward compatible I would have been fired. When are you going to fix that?
How do I get back to my old version of Firefox (3.1.17) which was compatible with my printer?
Firefox has never had good, simple bookmark management like Netscape had - and you didn't even try to fix it. Why?.
The new Firefox 4 is crap. It must have been developed by a committee. Is this a government projecy?
I really need to get back to Firefox 3.1.17 -- how do I do it? Really.

http://www.mozilla.com/en-US/firefox/all-older.html
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox

Similar Messages

  • Can not see the details of the task approved in UWL of ESS

    Leave approver can not see the detail of the task approved such as the start and end date of the leave, number of days used, leave quota details of the applicant when he approved it.
    Please give your advises!
    Regards,

    Hi!
    Maybe these attributes are not being shown due to the fact that they might have been specified in the "List of Display Attribute to exclude from Preview/Detail area" attribute of the UWL iview currently being used.
    As you can see in the Help page:
    http://help.sap.com/saphelp_nw70/helpdata/de/0a/ad68c125ae496f8c04a25090bd2e3c/content.htm
    It states the following about this attribute:
    "Enter the names of the attributes which you want to hide from the display in the preview area. These names should be comma separated."
    Maybe for the UWL iview currently being used it has been specified some values for this attribute, and so some information for the items such as the start and end date of the leave (along with the others you have mentioned) are not getting displayed in the preview area.
    Hope this helps!
    Best regards,
    Armando Zaro

  • Problem in seeing the details in Monitor of Infopackage......

    Hi,
    I am doing INIT without data transfer.
    When I go in monitor and try to see the details I not able to see any thing , its not displaying any of the TABS of monitor like Hedear , Status and Details.
    When I go to data target and try to open from again it dont displays anything.
    Can anybody let me know if have faced similar problem?
    Thanks , Jeetu

    Hi Jeetu,
    Please can U check the Scheduling options inthe Infopackage screen, plz ensure that the job has been scheduled either immediately or to a specific time period.
    If it was a immediate run, plz check the job status in SM37 for both source system and BW.  If the job has ran successfully then you should get some logs for that, U will not find logs unless until the job hasn't ran (or) started.
    Hope this should help U.
    Regards,
    Syed

  • Where i see the detailed log of cache referesh error????????

    in sxi_cache when i do full refresh...i get error in cache refresh....
    where can i see the detailed log of that error

    In SXI_Cache you mainly check the status of the Integration proceess.0 means the IP is fine and 99 means there is a cache issue.
    Also check this
    https://websmp202.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
    Regards,
    Prateek

  • Seeing the detailed sql  with db table names for an analysis in OBIEE 11g?

    Hello All,
    I am trying to see the detailed sql for an analysis to see which tables my analysis is hitting back in the database. Currently all i see is the subject area name with bunch of s_0, S_1,S_2.... but i want to see the actual table names which the Analysis is pulling the data from, I am new to OBIEE. Any help or advise with the steps in order to accomplish my goal is greatly appreciated.
    Thanks,
    Ravi.
    Edited by: user1146711 on Aug 23, 2011 3:24 PM
    Edited by: user1146711 on Aug 23, 2011 3:30 PM

    Hi ravi,
    You can check in the presentation services by going to Administration/manage session/view log for the specific report that you are running.
    You can even check the SQL in log file NqQuery.log in your installation folder C:OracleBI\server\log\NqQuery.log
    Check this Courtesy by gerard http://gerardnico.com/wiki/dat/obiee/manage_session_log
    hope answered.
    Cheers,
    KK

  • Portal Runtime Error,See the details for the exception ID in the log file.

    Hi,
    I am Working on EP 7.0 .today am Getting this Error.
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    The exception was logged. Inform your system administrator..
    See the details for the exception ID in the log file.
    Any Plz Give me idea to Solve this Problem........
    Reply ASAP..
    Thanks & Regards
    kumar

    Hi Kumar,
    Upload com.sap.logon.runtime.par(logon page .par file) into the portal.
    problem will be solved..
    regards
    Nizam

  • ICal crashes each time I click on an item to see the details of it.

    Hi,
    I recently installed leopard. iCal doesn't really work that well anymore...
    Each time I click on an item to see the details, it crashes. When I reopen iCal, I try the same action again and it works.. Strange... sometimes it works, sometimes it doesn't...
    I've sent an error report to Apple.
    regards,
    F.

    My situation is a bit different - iCal never crashes, BUT I end up having to quit the program and then reopen. I search for a To Do item, then double-click it to open the detail window and nothing opens. However, when I toggle the Spaces window so that I can see all my windows, I can see that the detail window is open in iCal (but of course that doesn't help me because it's too small to read and I can't edit it even if I could read it). I go back to iCal and the detail window is not open. I'd like to be able to send the automatic bug report to Apple when this happens, but since iCal doesn't actually crash, I can't. Anyone else having the same problem?

  • When banking on-line Mozilla will not allow me to see the details of a transaction while Internet Explorer will allow it. Mozilla was doing it, but now won't.

    I do my on-line banking with Bank of America generally using Mozilla Firefox. Recently I noticed when I clicked on a bank transaction to see the "details" or to print only that specific transaction, it will not allow me to see the details.
    Previously, whenever I clicked on a transaction, to see the image of a check I wrote for example, it always brought up the image of the check. Now, it will not do it.
    If I use Internet Explorer, I can click on a specific bank transaction and see the details, exactly how I used to be able to do it with Mozilla Firefox.
    Therefore, the problem is with Mozilla and not the Bank of America web site, right?

    Problem solved: AdBlock Plus 2.4 needs to be disabled on the BofA site.

  • How to drill from an aggregate field to see the details

    Hi everybody, I have a problem about "how to drill in detail".
    I developed a report like the following one:
    !http://www.freeimagehosting.net/uploads/210c30bdbc.jpg!
    where tickets id's are grouped and categorized by Product Category, by Product and by Market Place
    Now, the customer's request is this: drilling on the Tickets' totals field (see the pictures above) I want to see all the details of the tickets involved in the total
    !http://www.freeimagehosting.net/uploads/b89eed5238.jpg!
    For example, if they drill from the field where the Tickets' totals = 123, they want to see (in another worksheet) the details regarding all the 123 tickets; if they drill from the field where the Tickets' totals = 15103, they want to see the details regarding all the 15103 tickets;
    From every total, they want to see the ticket's details.
    I tried to create a link to another worksheet starting from the last "Total of tickets" field.....but I found a big problem:
    How to pass to the 'detail worksheet' all the Tickets' id, as parameters, from a field (Total of tickets) which shows an aggregate number of tickets....
    If anybody has any kind of ideas about how to solve this problem or how to drill in another way, I will appreciate it very much
    Thanks in advance
    Alex

    John and Rod, thanks again for your reply !
    You are right....I missed to create the item class with the "drill to detail" option checked.
    Now, when I drill to detail, I see the details data in another worksheet and this is fine, but I noticed two things:
    1. the "drill to detail" works only when the report layout is "Crosstab" and not when it is "Tabular" (I verified this strange behavior with the VIDEO5 tutorial schema)
    2. every time (in the detail worksheet), I have to re-insert the parameters I pre inserted for the main worksheet, to have exactly the subset of data I want.
    Although for the layout I don't have any kind of restriction (I can switch from the Tabular to the Crosstab), about the parameters the customer asked me to avoid this second insert....
    So I thought to use the database contexts to set the parameters only once in this way:
    Inside my report I'll have
    a. one worksheet just for setting the parameters once;
    b. one worksheet (master worksheet - crosstab layout) from which I can drill in details
    c. one worksheet (detail worksheet - tabular layout) with all the details I need
    Then I have to create a custom folder which has, inside the query, dynamic where conditions based on the parameters set from the worksheet.
    Once the parameters are set (at the session level) and I drill to detail (where the details are in my custom folder), I should see exactly the details of the original dataset in the main worksheet.
    What do you think about the point 1 and my idea to resolve the point 2 ?
    Alex

  • Please let me know how to see the details related to the Key figure used

    Hi,
    Basic key figure BHSL-I belonging to the table GLPCT is used in the one of the reports created using the Report Painter.
    Please let me know how to see the details of the BHSL-I key figure.
    Details I am looking for is, how the field BHSL-I is getting populated I mean from which field/fields combinations and what is the formulae involved in the calculation of the key figure.
    Please let me know if any documentation exists about the key figures.
    Thanks in Advance.
    Madhuri.

    What model year is it? If older than a 2011 model, and even some early 2011 models, you will need the original install discs that came with it.
    If older than a 2011 model then you use the Online Internet Recovery system to erase the drive, format it Mac Extended and then reinstall OS X.
    To access that online recovery system at startup hold down the Command + Option/Alt + r key and keep them held down until you see a globe on the screen.

  • Is their any function module to  see the details of employee ?

    Hello ,
    Is their any function module through which we can  see the details of employee
    ASAP
    SANDEEP JADHAV

    BAPI_EMPLOYEE_GETLIST
    BAPI_EMPLOYEE_GETDATA
    BAPI_PERSDATA_GETDETAIL: Read personal data
    BAPI_PERSDATA_GETDETAILEDLIST: Read instances with data
    BAPI_PERSDATA_GETLIST: Read instances

  • Why can't we see the details of a picture or video taken with our iphone or Ipad? Detail like when it was taken the picture or when the movie was filmed. I think that this very very important for our memories.

    Why can't we see the details of a picture or video taken with our iphone or Ipad? Detail like when it was taken the picture or when the movie was filmed. I think that this very very important for our memories.

    Yes, I know that, but it was easier to see it on the Iphone self, like the other company phones. The name of the picture taken should be the date when it was taken.

  • How to see the details of archived vendor account?

    Hi,
    User want to see the detail line items of a vendor account for year 2002. As it has been archived, we are able to see the balances only but not the details. Can anyone please let me know, how to see the details for an archived data.
    Quick response will be appreciated.
    Thanks & Regards

    Hello,
    Use t.code SARI for archived line items
    give archiving object MM_EKKO and archiving infrostructure SAP_DRB_MM_EKKO and execute
    you will get other screen and fill the necessary fileds and execute.
    regards
    kumar.

  • I cannot see the details of the playing song on iTunes Radio.

    I cannot see the details of the playing song on iTunes Radio on my iOS Devices. On pc and mac it's fine but on all my iOS devices, the album artwork, title and artist info is missing; however, the song plays. I can see the songs i played on my iPad when i open up iTunes on my pc. I restarted the device, logged out and in several times with my apple id, nothing changes.

    Hi, I have this problem too. I've uploaded photos of my granddaughter to iCloud Drive on my 5 year old PC and can see the content on my PC at iCloud .com - though the system does not allow me to see minimised photos, just lots of numbered, blue rectangle icons. I spent over 2.5 hours with Apple Support yesterday and they could NOT resolve the issue in any straightforward manner, though did suggest I go through the same time consuming uploading process placing the same photos in the Beta version of 'Photos' available at iCloud.com. What a cumbersome system. Why hasn't Apple offered an iCloud Drive app (free of charge) so that once content has been placed in iCloud Drive it can Bev retrieved on any iOS device, as Apple suggest. Here is what they say at Apple.com (see also the illustrations they offer for iCloud Drive on an iPad - I was informed yesterday, by two advisors, that they couldn't find way to locate the suggested pages either?)
    Storing files in iCloud is simple. Just as it should be.
    To upload your files to iCloud, simply drag them into the iCloud Drive on your Mac running OS X Yosemite or PC running Windows 7 or later. Or start a new document using an iCloud-enabled app on your iOS device. Then you’ll be able to access those documents from all your devices.

  • I'm using a Mac / Leopard. I can no longer "save as" an image. Please see the "details" section for more information. Thanks.

    I'm using a Mac / Leopard. Beginning about a month ago, I can no longer "save as" an image. The "Save Image As" menue comes up -- but then nothing. I can drag images onto the desktop, but that's it. I tossed out Firefox, and then downloaded it and reinstalled it, but have the same problem. (I couldn't figure out how to get rid of profiles and bookmarks -- so they remained). As I type this question on the Firefox website, I don't see the forum in front of me -- just a window to type a question. So, if you answer this question, I'm not sure I'll be able to find the answer. Thus, if you'd be so kind as to also email me the answer, that would be greatly appreciated: davidfreeman11 AT gmail.com Thanks

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r124
    Update the [[Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • Is there a way to see the details of transport request files

    hello friends
    for some reason when I try to create a package with objects like function group and function modules, I am not able to import the function modules on the other server.
    So i would like to see if the transport request files that I have created (K900226.EC1 and R900226.EC1) has these modules included in them.
    Is there a way that I can see what objects are included in the released transport request files.
    Your help will be greatly appreciated.
    Thanks
    Ram

    Hi Ram,
    You can see the objects included in a transport request by going to se09 and opening your transport request and drill down to the task and below the task you would have all the objects that are included in the tranport. You can also use se03 to get the details by drilling down the tansport request.
    The problem with importing the function module might be because either the function module or the function group may not be active which may cause the tranport to fail. please check if both are active or not.

Maybe you are looking for

  • I want to buy apple care for my 3gs inida

    pla say me

  • .avi file to dvd

    I was wondering if I can burn a movie in .avi format to a dvd If this is possible can you guys teach me how please!!

  • GUI not working anymore after installing of ABAP preview

    Hi, I have sapgui 6.40 installed on my computer. Now after installing the Netweaver Preview ABAP stack (the installation worked fine) I cannot start my sapgui anymore. I get a messagebox with the following message: "The procedure entry point RfcReset

  • "MOVE" not Copy items to the iphoto library

    when I check this option in the preferences it copies the photos to iphoto and it leaves me with 2 copies! Why?!?! I just want to move them into the iPhoto library permanently, but if I uncheck the box it just links to it! How do I "MOVE" items to th

  • Exposure and Brightness, how to use

    When a photo needs to be corrected it being too light or too dark, I really don't know whether to use the exposure or the brightness rulers and what to use first? Since I think I get the same effect, my feeling is that it doen't seem to matter? But I