Seeburger BIC mapping error(on changing mandatory fields)

Hi Experts,
I am working on IDOC to EDIFACT file scenario with seeburger.
Earlier my end to end scenario was working fine. I got a requirement to change all the mandatory fields of segment NAD into non mandatory field. To acheive this i changed my Seeburger BIC mapping and target XSD in PI. After this process i create .sca file and ask basis to upload it.
But after deployment i am getting error in communication channel where i am using BIC mapping. The error is message is quite big, still i am attaching a part of it. Please help
Message processing failed. Cause: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: BICMapping: runMapping() FATAL ERROR: java.lang.OutOfMemoryError: Java heap space (failed to allocate 16777240 bytes) Stacktrace: java.lang.OutOfMemoryError: Java heap space (failed to allocate 16777240 bytes) at java.io.ByteArrayOutputStream.write(ByteArrayOutputStream.java:95) at java.io.BufferedOutputStream.write(BufferedOutputStream.java:105) at sun.nio.cs.StreamEncoder$CharsetSE.writeBytes(StreamEncoder.java:336) at sun.nio.cs.StreamEncoder$CharsetSE.implWrite(StreamEncoder.java:395) at sun.nio.cs.StreamEncoder.write(StreamEncoder.java:136) at java.io.OutputStreamWriter.write(OutputStreamWriter.java:191) at java.io.BufferedWriter.flushBuffer(BufferedWriter.java:111) at java.io.BufferedWriter.write(BufferedWriter.java:212) at java.io.Writer.write(Writer.java:126) at com.seeburger.jucon.dochandler.util.GrammarFileWriter.write(GrammarFileWriter.java:262) at com.seeburger.jucon.dochandler.EdiSegmentData.write(EdiSegmentData.java:234) at com.seeburger.jucon.dochandler.Segment.write(Segment.java:645) at com.seeburger.jucon.dochandler.EdiSegmentData.write(EdiSegmentData.java:390) at com.seeburger.jucon.dochandler.Segment.write(Segment.java:645) at com.seeburger.jucon.dochandler.EdiDocWriter.write(EdiDocWriter.java:367) at com.seeburger.jucon.dochandler.InhouseDocWriter.flush(InhouseDocWriter.java:884) at com.seeburger.jucon.mapping.Mapping.run(Mapping.java:2429) at com.seeburger.jucon.seebicapi.BICMapping.runMapping(BICMapping.java:1724) at com.seeburger.jucon.seebicapi.BICMapping.run(BICMapping.java:2518) at com.seeburger.jucon.seebicapi.BICMapping.startSyncMapping(BICMapping.java:1415) at com.seeburger.bicxiadapter.CCIInteraction.convert(CCIInteraction.java:1201) at com.seeburger.bicxiadapter.CCIInteraction.convertCalledFromModule(CCIInteraction.java:911) at com.seeburger.bicxiadapter.CCIInteraction.execute(CCIInteraction.java:313) at com.seeburger.xi.api.cci.impl.nw71.SeeXIInteractionProxy71.execute(SeeXIInteractionProxy71.java:86) at com.seeburger.bicxiadapter.module.CallBicXIRaBean.process(CallBicXIRaBean.java:384) at com.seeburger.xi.api.module.impl.nw71.SeeModuleAdapter71.process(SeeModuleAdapter71.java:78) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal
java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:169) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:266) DESCRIPTION: BICMapping: FATAL ERROR: Internal Fault. Class could not be load or instatiated. Check Installation, access rights. Last error: java.lang.OutOfMemoryError: Java heap space (failed to allocate 16777240 bytes)
Regards,
Shradha

Hi,
Even I faced a Similar problem...
1) make sure that the size of the data that is coming to BIC map is not larger than the size defined in the Source field (Check In BIC and SAP XI/PI map.
2) Make sure id any other seeburger mapping are working fine , This is because you have to deploy the file in form of Active mapping.sca in SAP XI/PI after the changes are made on BIC side.
3) Check the Adapter Engine Cache ...
Hope this helps..
Regards,
Sainath Chutke

Similar Messages

  • Error in Seeburger BIC Mapping

    Hi all,
    I am working on Seeburger BIC Mapping Designer.
    As i am starting off with it, i have planned to do a very simple scenario File to file.
    Source would be an XML and target also would be an xml.
    Compilation is fine, but while converting I am gettuing an error
    "[Error:ID=2023;LEVEL=1] InhouseDocReader readNextSegment(): offset[4(read Segment : KA\)]: caught ReadingException: Length limit exceeded - no SEG. delim. found!!!
    DESCRIPTION: InhouseDocReader causes an ReadingException while trying to read the next segment of current file, abort
    <<ErrorStreamEnd>>
    Conversion error "
    Please let me know what should be done.
    Even I have enabled SetIngnoreCRLF option in the source options.
    Cheers,
    Karthick

    Hi Karthick,
        Where do you get this error?
    In BICMD ?
    Have you created the E2X and/or X2E mapping programs in BICMD tool?
    Test it locally in the tool intself before deploying the mappings to XI server.
    Follow these steps to create a 1;1 mapping for XML to EDI and EDI to XML conversion program:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b66651-eeea-2b10-e5a6-8459ec30d948;jsessionid=(J2EE3414900)ID2060961950DB01298938248398894809End
    Regards,
    Ravi

  • Can SeeBurger BIC Mapping tool automatically remove Delimiters?

    Hi all,
    When we map IDOC's to EDI X12 messages using the SeeBurger BIC Mapping tool, we sometimes have delimiters occur in fields such as name or address. We are using the setDestinationDelimiter and have changed our delimiters so this occurance is rare. However the problem may still occur. This causes an invalid message to be passed to our partner.
    One option is to use XI mapping and the replace function on each field however this is cumbersome and not the ideal solution.
    Is there a way to automatically remove Delimiter characters from fields as part of the BIC Mapping.
    Cheers,
    John

    Hi Satish,
    Thanks for re-iterating the problem. You are absolutely right that this does cause an invalid message.
    Also thanks for your suggestion regarding asking business not to enter the data, this has been done and as stated the occurences of these delimiters in the fields will be low, usually due to user error.
    We still however want to cater for these occurrences and prevent an invalid message being sent to the partner.
    I'm not sure if you've ever used the BIC Mapping tool and what I'm really looking for is someone with experience in this area to give a solution that works. Anyone out there who can help?
    Cheers,
    John

  • BIC mapping error with Text as trasnfer mode & File type

    Hi guys,
    I am using ftp adapter in my sender channel and also using BIC mapping in the sender side.
    When i specify "Binary" as my transfer mode as well as File type, It is working fine.
    When i specify "Text" as my transfer mode as well as File type, i am getting the below BIC mapping error. According to client requirement i am supposed to use Binary. Can anyone help me on this.
    SEEBURGER BICXIADAPTER --- CONVERSION ERROR ---Error: [Error:ID=2023;LEVEL=1] InhouseDocReader readNextSegment(): offset[12(read Segment : BILLINGHEADER)]: caught ReadingException: only whitespaces as fill characters allowed!, Trace: [com.seeburger.jucon.dochandler.util.WrongFormatException: only whitespaces as fill characters allowed! at com.seeburger.jucon.dochandler.inhousereader.InhouseSegmentReader.readNextSegment(InhouseSegmentReader.java:384) at com.seeburger.jucon.dochandler.inhousereader.InhouseSegmentReader.readNextSegment(InhouseSegmentReader.java:193) at com.seeburger.jucon.dochandler.InhouseDocReader.readNextSegment(InhouseDocReader.java:2399) at com.seeburger.jucon.dochandler.InhouseDocReader.moveNext(InhouseDocReader.java:1818) at com.seeburger.jucon.mapping.E2X_DT_BILLINGDATA_2.main(E2X_DT_BILLINGDATA_2.java:991) at com.seeburger.jucon.mapping.Mapping.run(Mapping.java:2313) at com.seeburger.jucon.seebicapi.BICMapping.runMapping(BICMapping.java:1636) at com.seeburger.jucon.seebicapi.BICMapping.run(BICMapping.java:2386) at com.seeburger.jucon.seebicapi.BICMapping.startSyncMapping(BICMapping.java:1343) at com.seeburger.bicxiadapter.CCIInteraction.convert(CCIInteraction.java:1167) at com.seeburger.bicxiadapter.CCIInteraction.convertCalledFromModule(CCIInteraction.java:873) at com.seeburger.bicxiadapter.CCIInteraction.execute(CCIInteraction.java:294) at com.seeburger.bicxiadapter.module.CallBicXIRaBean.process(CallBicXIRaBean.java:363) at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:102) at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:292) at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103) at com.sap.aii.adapter.file.File2XI.send(File2XI.java:3672) at com.sap.aii.adapter.file.File2XI.processFtpList(File2XI.java:2408) at com.sap.aii.adapter.file.File2XI.invoke(File2XI.java:630) at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java:513) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:219) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) ] DESCRIPTION: InhouseDocReader causes an ReadingException while trying to read the next segment of current file, abort

    Hi Pratichi,
    in my point of view having text as the file type,the file will be having characters that are used for Segment separators or Element separators ( like space ) in the standard EDI format message.  Hence it is throwing exception in X2E mapping. It is just my point of view but not sure.
    Thanks,
    Shabbir.

  • How to import the IDOC into Seeburger BIC mapping designer

    Hi All,
    Can u please tell me how to import the IDOC into Seeburger BIC mapping desginer.
    I have scenario My scenario is SAP GTS 7.0.....>Seeburger BIS.....>Atlas customs system for Germany
    Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send
    to Atlas systeam.
    Regards,
    Ramesh.

    Hi Ramesh
    BIC is a tool from Seeburger to transmit the XML data to EDI and EDI to XML.
    Seeburger mapping programs for transferring the XML data to EDI data and EDI data to XML data, but not for the structure changing, in the IR your mapping program is same.
    Receiver side you need AS2 Adapter for converting data to EDI target structure. we have many EDI versions are available, for converting the EDI to XML or vice versa AS2 gives some default mapping programs, xml to EDI or EDI to XML convertion done through this mapping programs.
    Seeburger AS adapter provider provides some mapping programs(for example EDI4010 version or other), if you are using the same EDI version(4010) then you can use that mapping programs, if the version is different then we can manually generate the Seeburger X2E and E2X mappings for the corresponding version and signal(850 or 810 or ..), for this seeburger provides the mapping designer tool (BIC), there we can develope the X2E and E2X mapping programs and configure this in the Seeburger work bench.
    Regards
    Ramesh

  • IDoc to File[EDI] using seeburger BIC Mapping Tool

    Hi Gurus,
    I'm having a scenario of IDoc to EDI FIle, I'll be using IDoc DESADV.DELVRY03.ZDELVR0X; Kindly advise steps needed in BIC Mapping Tool. I've already referred to this post /people/dijesh.tanna/blog/2008/05/25/sap-pixi-content-conversion-using-generator-mapping-functionality-of-seeburger-part-1 but still can't get it right.
    Thanks.

    Thanks a lot experts :D....
    I'll be using a file adapter for my scenario..
    Any Idea on what Seeburger BIC mapping module should I use?
    am I just use the ff module?
    Module u2013 Processing Sequence                                   
    Number     1     Name     localejbs/CallBicXIRaBean     Type     Local Enterprise Bean     Module Key     bic
    Number     2     Name     localejbs/CallSapAdapter     Type     Local Enterprise Bean     Module Key     exit
    Module u2013 Module Configuration                         
    Module Key     bic     Parameter name     destSourceMsg     Parameter value     MainDocument
    Module Key     bic     Parameter name     destTargetMsg     Parameter value     MainDocument
    Please advise.
    Thanks.
    Edited by: Devilbatz on Dec 8, 2010 8:31 AM

  • Need Seeburger BIC Mapping names for standard Msg types - EANCOM2002

    Hi All,
    I need Seeburger Bic Mapping names for standard Msg types.
    <b>Orders
    ORDRSP
    DESADV
    Note that they are in EANCOM2002 format.</b>
    Kindly provide them asap.
    Can anyone pls send the document to [email protected] if you have the Seeburger mapping names for EANCOM2002 and ANSIX12.
    Thank You.
    Regards
    Seema.

    Hi Marcos,
    >> IF they have been deployed in your system the names will be:
    >> See_E2X_ORDERS_UN_D96A
    >> See_X2E_ORDERS_UN_D96A
    >> See_E2X_DESADV_UN_D96A
    >> See_X2E_DESADV_UN_D96A
    R u sure of we can use these mappings for EANCOM2002 format.??
    R u sure EANCOM2002 is equavalent to UN D96A???
    -Seema.

  • Seeburger BIC Mapping Designer-Project Explorer.......

    Hi Everyone,
          I have a Problem with Seeburger BIC Mapping Designer. The problem is All the Projects/Mappings that i have done are suddenly disappeared in the Project Explorer, but my projects are available in the C:\Program Files\SEEBURGER\MappingDesigner\user\bicmd folder. I think the file "Project.xml" is refreshed.
    what could be the problem and please suggest me with the suitable solution.
    I am currently using 6.3.2 Version of BICMD.
    Regards,
    Varun Reddy.K
    Edited by: Varun Reddy K on May 7, 2008 4:58 PM

    Hi Seshagiri,
        Thanks for your reply, even i opened and closed it multiple times, but no use.
    Regards,
    Varun.

  • Seeburger BIC Mapping-Small info required

    Hi folks,
            I am currently working on Seeburger BIC Mapping designer, Are there any forums for Seeburger BIC Mapping related Issues, can we discuss the Seeburger BIC Mapping related issues in this forum.
            Please let me know.
    Regards,
    Varun

    hi
    check the link related to bic mapping
    1./people/nithiyanandam.au2/blog/2008/02/20/handling-edi-interfaces-using-seeburger-bic-modules
    2.Building own schemas in Seeburger bic mapper
    3.BIC mapping names / classes
    4.Seeburger - BIC configured as Module
    BR
    Kasturika

  • Seeburger BIC Mapping deployment issue in PI 7.1

    Hi experts
    We have upgraded from XI 3.0 to PI 7.1 and seeburger is also upgraded to  a compatible version.(2.x).
    Mappings_user.sda was used in 3.0 environment.
    But we are not able to deploy the same in 7.1. I think sda format is not supported in 7.1.
    Is there any way to convert .sda to .sca and deploy?
    Or how can we generate a compatible deployment file for 7.1?
    I have tried using BIC mapping designer,but it shows the option for .sda and .jar only.
    Thanks in advanceDhanish Joseph

    Hi
    I have installed BICMD  632 version and imported .BICMD project file.
    Then assigned sda/sca number to it and created deploy file.(Mapping_user00.sda).
    Then installed this in PI system using JSPM.
    I have tested allmost all the mappings successfully except one in PI system.(EDI 990 message).
    When i send data to PI  data comes to channel and it shows conversion error. But detailed information not available.
    In seeburger monitoring  the message goes to recovery mode.
    I have used the input 990 X12 and tested in Seeburger BIC MD. And there it is success!!!!!! So i am confused what is happening when it comes to PI system.
    I faced some issues>>>
    1.  while importing project file into BIC MD it asked for apply some autocorrection  for one map.(different than this). I have clicked on cancel
    2. When i assigned SDA number to my project i have selected 2.1.0  SDA version( 1.8.0 option was also there).
    Your prompt reply is greatly appreciated .
    Thanks

  • Seeburger BIC Mapping Designer: Special Character (German Umlaut) Problem

    Hi,
    i have created a Mapping with Seeburger Mapping Designer (Invoicd96a to XML). I started the test environment, compiled the mapping and converted the Message to XML. I got a syntax error in the destination file so i added the setSourceEncoding("UTF-8") option and i got a working xml file.
    My problem is that all special characters, will be displayed as ? So the word "Beträge" will be converted to "Betr?ge".
    What i have to di, to fix this problem ?
    Thanks in advance 
    Matthias

    hi,
    i have to create an Edifact to XML Mapping with the BIC Mapping Designer. After creation i can deploy this mapping to SAP XI and calling it by using it as module in the specified adapter.
    My idea is that the mapping should working correct in test enviroment before i deploy to SAP PI.
    Perhaps anyone has an idea.
    regards
    Matthias
    P.S.: A few month ago i had a similar problem with the conversion agent and it was just a "secret" checkbox

  • Problem in SEEBURGE BIC mapping adapter

    Hi experts
               I am using SEEBURGER MAPPING adapter for file to idoc scenario .I have to convert an input flat file into xml using BIC mapping adapter.The problem is that when i am giving input file to convert into xml ,the conversion is failing with a error that a special character(?) occurs in the begining of file.when we r opening the file then we r not able to see any special character.The file is in UTF16 Little endian encoding. we r unable to find that how the spechial character is coming in the input files and how to debugg it.Plz guide me how to proceed.Is there any function in SEEBURGER to remove special character from the source file?
    Regards
    Neha

    Hi Neha,
    Seeburger is providing Modules (Configurable in CC module chain) described in SAPXI_SeeXIModules_en.pdf with additional functionality like Replace String,Start Local Up, Charset Conversion, zip and dynamic Configuration.
    So if you have those modules installed you can use Replace String functionality to replace this string.
    Regards
    Naycho

  • Seeburger BIC let errors pass

    Hi,
    We have a scenario where we read from a FTP site. We are using seeburger BIC to convert the messages to something readable.
    Unfortantly there are also som junk messages in the file folder or they contain a UNA that Seeburger does not understand. This mean that the seeburger module throws an error. It seems like the FTP adapter cannot move the file to the error folder, so the next file can be processed.
    Any ideas on how this can be changed so we can process the files even when some of the messages are failing..
    Daniel
    [figaf|http://figaf.com]

    Hello Daniel,
    It seems like the FTP adapter cannot move the file to the error folder, so the next file can be processed.
    Any ideas on how this can be changed so we can process the files even when some of the messages are failing..
    It could probably be also related to the issue of the file adapter archiving e.g processing mode is set to archive and when there are errors, the rest of the messages cannot be processed or at least some a stucked. What we have done is to set the mode to delete and disable archiving for the moment. Maybe if you also disable the archiving for faulty files, it could also work on your end.
    Hope this helps,
    Mark

  • Seeburger BIC Mapping Designer Material & Further Validations

    Hi Guys,
    I was hoping if someone can point me to more material on BIC Mapping designer as only thing i have the standard PDF which came with it. However I need to do more stuff e.g. enhance validations and put a few more checks in. Was wondering If one available?
    regards

    Hi Mimranacc,
           Can you please give me an example of the kind of validation that you would like to do?
          SEEBURGER do have separate integration tool called SEEBURGER BIS(Business Integration Server).Check with any of your friends who are working on that.They can help you out for more material.Some times the content tend to change based on the version of BICMD do check that also .I don't think its available on SDN as its SEEBURGER proprietary content.
    Thanks,
    Ram.

  • Mappings_user.sca - Seeburger BIC Mapping Designer

    Hello experts,
    I have read SAP note 1353318 about how to start the BIC adapter on PI 7.1.
    Question: where do I get the file "mappings_user.sca" from? It says it is on the BIC Mapping Designer-CD, but the installation files I received via the Internet - I do not have the CD.
    Can I somehow create that file with the BIC Mapping Designer that I have already installed?
    Thank you for any hint you can give me!
    Best regards,
    Peter

    Hey peter,
                       go to your seeburger installation directorys bin folder and check for bicdesigner.ini file and add the  below cmd
    CmdLnArgX=-ProjectAdmin  where X will be 4 (i.e. count of cmd line agrs used ) .
    Then start the bic mapping designer tool and go to tools option there you can see a new option called Assign Projects to SDA, after that you can create a deploy file..This is new option provided by seeburger bic so that only project Admin can have rights of creating the deploy file.
    If you still face any problems post the same..
    HTH
    Rajesh

Maybe you are looking for

  • [JS CS3] A question about clearing scriptArgs

    Do parameters remain in the app object until they are cleared? I'm invoking scripts from indesign server, supplying parameters which the scripts read using app.scriptArgs.getValue(). Should I call app.scriptArgs.clear() in all scripts, after the "arg

  • Had to re-install iTunes. Get so far, then I get an error message

    I was prompted to upgrade iTunes to the new version 11.1.4. In doing so, I was getting an error message that it installed improperly, and received another dialogue box telling me to re-install iTunes. So, I un-installed it, and tried re-installing. I

  • Auto Logoff while in Shared Services Security Mode

    Pretty simple question but I still haven't found the answer. My client's essbase server is set up in Shared Services Security Mode, so now the auto logoff options for the server don't apply. Is there a way to set this via shared services? Or is there

  • I phone 4 gets no service anywhere... why???

    I Upgraded the i phone 4 to the ios 5 and i get NO service anywhere even when im at home im connected to wi fi and every 1 else has service but me..... why is that i had the i phone 3g before and it worked great!! but ever since i upgraded and took m

  • Cannot install tryout

    I have just downloaded and tried to install Acrobat 3D tryout. But a error message comes up saying 'Error 1311. Source file not found: C:\DOCUME......\Data1.cab. Verify that the file exists and that you can access it. Please help me how to proceed th