Seeburger bic module mapping parameter

Hi all,
I'm implementing a Invoice02 to 810 scenario, my mapping name in repository is MM_xyz..
But I'm using the standard content of Seeburger...there are lot of mapping transformation..
So do I need to create 1:1 mapping in BIC mapper or can I use See_X2E_ANSIX12_810_V4010 as my mappingName in bic module config...
Thanks,
Srini

>
Srinivas Davuluri wrote:
> Hi all,
>
> I'm implementing a Invoice02 to 810 scenario, my mapping name in repository is MM_xyz..
> But I'm using the standard content of Seeburger...there are lot of mapping transformation..
> So do I need to create 1:1 mapping in BIC mapper or can I use See_X2E_ANSIX12_810_V4010 as my mappingName in bic module config...
>
> Thanks,
>
> Srini
Dont confuse yourself with the data mapping and the BIC mapping.
Note that the data mapping transforms your IDoc XML to 810 EDI XML. Here you have a transformation logic via the business rules. The BIC mapping is nothing but a structure conversion something you can say like FCC in file adapter which will convert the EDI XML to the EDI flat file
The BIC is at an adapter level conversion as it is part of a module. You actual IDOC to EDI XML transformation is done by your message mapping.

Similar Messages

  • Seeburger BIC module not working

    I am using Seeburger BIC module in my sender file adapter. But when I pick up an EDI file using this file adapter, the BIC module is not called. The file adapter simply passes the EDI file to Integration Engine without passing it through the BIC module. Hence, message mapping fails at Integrating Engine as the Message is not in XML form. Also I am not getting any error in adapter monitoring/Message monitoring saying that the adapter module does not exist.
    The BIC module is deployed on XI server. I have activated my communication channel. I have put the module names correctly and in proper sequence and also there are no typo errors in entering the parameter names.
    Please help.
    Regards,
    Shweta

    R u passing the correct mapping name under the parameter value in module configuration?
    Regards,
    Anoop

  • Seeburger BIC module

    Hi all,
    I am using seeburger BIC module to convert XML file to EDI.
    My question is, can we configure BIC module parameter "srcDelimiter" dynamically rather than supplying any value?
    Thanks

    I dont think you can dynamically set the values for the parameters of the same..
    There is an option which you can look for is how to pass dynamic parameters to the mapping using some other module..
    In that direction you need to look for..but for bic and for delimiter parameter you cannot pass the values dynamically..
    HTH
    Rajesh

  • Seeburger BIC Mapping-Small info required

    Hi folks,
            I am currently working on Seeburger BIC Mapping designer, Are there any forums for Seeburger BIC Mapping related Issues, can we discuss the Seeburger BIC Mapping related issues in this forum.
            Please let me know.
    Regards,
    Varun

    hi
    check the link related to bic mapping
    1./people/nithiyanandam.au2/blog/2008/02/20/handling-edi-interfaces-using-seeburger-bic-modules
    2.Building own schemas in Seeburger bic mapper
    3.BIC mapping names / classes
    4.Seeburger - BIC configured as Module
    BR
    Kasturika

  • Seeburger BIC Help!!

    We have followed all the steps for deploying Seeburger BIC module. I am currently trying to use File adapter and configure BIC module in the file adapter. I am successfully able to post IDOCS from R/3 but cannot see any errors or messages at the. If I post IDOCS without configuring BIC everything works fine (in terms of message transfer not EDI mapping).
    Does anyone have an idea on why this is happening? how to debug BIC? Where I can find logs ?
    Any help is greatly appreciated.

    Hi,
    You can folow the following steps inorder to send the IDOC into EDI
    1) Find out the Correct Mapping Name in BIC mapping Designer. In order to get the Standard Mappings into your BIC tool you need to import the “prj_GeneratorMappings.zip.bicmd” which is found under the path
    “\user\bicmd\Exchange” after installing the BIC map designer. This will import the Standard
    Mappings that are available with the Map designer by creating a new “GeneratorMappings”
    project tab.
    2) And also we need to import another file “prj_SeeburgerFormatMapping_1.7.zip.bicmd” which
    comes with the Seeburger EDI adapter package. Once we import this we will have all the
    standard Structure for the EDI messages and standard mappings to convert the EDI Message
    structure to XML and vice versa.
    3)Now we need to copy all the standard mappings which ever is required from the
    SeeburgerFormatMapping_1.7 project to ActiveMappings project Tab, to generate the SDA
    file which needs to be deployed in XI server through SDM.
    Note: This SDA file generated will always have the lastest mapping that needs to be deployed in
    the server or in other words, once we generate an SDA file with selected mappings and if we
    need to include few more mappings in the later stage then we have to append all those mappings
    in the Active mappings directory and regenerate the SDA file.
    Regards
    Seshagiri

  • Dest Delimiter parameter in bic module

    Hi Experts,
    I am working on a IDoc to EDI scenario using seeburger modules (bic).
    While creating a EDI file on Target FTP server ,EDI content is written into file as a single line instead of a new line after every record.
    Please let me know if i had to use some bic module parameter in receiver file channel to insert a new line after every record.
    Also , can some one explain destDelimter parameter usage.I know that it is a string with the length of 6 characters order of the delimiter is as follows:subfield, field, decimal, quoting, fieldgroup, segment.
    But i want to know what quoting,fieldgroup and segment refer to in a EDI interchange.
    Thanks and Regards,
    Jyothsna

    Hi,
    > While creating a EDI file on Target FTP server ,EDI content is written into file as a single line instead of a new line after every record.
    For this you can use another module, that is newLine parameter (BIC     newLine     TRUE)
    > Also , can some one explain destDelimter parameter usage.I know that it is a string with the length of 6 characters order of the delimiter is as follows:subfield, field, decimal, quoting, fieldgroup, segment.
    > But i want to know what quoting,fieldgroup and segment refer to in a EDI interchange.
    Check the below link (read point 1 (For Delimiters variable in target side, Map UDF (setDynamicParameters) as below))
    Dynamic Configuration for Seeburger AS2 Adapter
    Regards,
    Venkata Ramesh

  • IDoc to File[EDI] using seeburger BIC Mapping Tool

    Hi Gurus,
    I'm having a scenario of IDoc to EDI FIle, I'll be using IDoc DESADV.DELVRY03.ZDELVR0X; Kindly advise steps needed in BIC Mapping Tool. I've already referred to this post /people/dijesh.tanna/blog/2008/05/25/sap-pixi-content-conversion-using-generator-mapping-functionality-of-seeburger-part-1 but still can't get it right.
    Thanks.

    Thanks a lot experts :D....
    I'll be using a file adapter for my scenario..
    Any Idea on what Seeburger BIC mapping module should I use?
    am I just use the ff module?
    Module u2013 Processing Sequence                                   
    Number     1     Name     localejbs/CallBicXIRaBean     Type     Local Enterprise Bean     Module Key     bic
    Number     2     Name     localejbs/CallSapAdapter     Type     Local Enterprise Bean     Module Key     exit
    Module u2013 Module Configuration                         
    Module Key     bic     Parameter name     destSourceMsg     Parameter value     MainDocument
    Module Key     bic     Parameter name     destTargetMsg     Parameter value     MainDocument
    Please advise.
    Thanks.
    Edited by: Devilbatz on Dec 8, 2010 8:31 AM

  • Seeburger BIC mapping designer : querry

    Hi,
         We have installed the SeeBurger BIC adapter. I have a querry regarding the mapping that we specify as a parameter to the BIC module in the modules tab of the communication channel.
          Are there standard mappings provided with the installation for EDI -> XML and vice versa , and we simply need to provide the name of the mapping that needs to be used or do we need to develop the mappings from scratch using the BIC mapping designer.
          If the first case is true then how to get the names of all the mappings that are provided so that we can make out which one do we need to use. If it is not so please help me with the BIC mapping designer manual path on the installation as we are not able to figure out the path to the manual.
    Thanks in advance,
    Pravesh Puria.

    Hi Babu,
    <i>1."you can use these mappings in "Modules" of your seeburger communication channel."
    >> can we use these developed mappings with BIC MD in any communication channel of Seeburger like OFTP,FTP ,AS2 ,BIC or we need to use those mapping with only BIC communication channel?</i>
    >>> Yes Babu,You can use this in all communication channel modules .
    one thing, "BIC" is not a seeburger adapter type.
    You need to deploy BIC Mappings in your XI server.
    You have to refer Seeburger manuals for this.
    <i>2.lets say if we have developed mappping with BIC MD ,then do we need to develop mapping with XI mapper too or its not needed?but if we do mapping with Xi then data format will be of xml but it needs to be converted to/from EDI ,so how it can be possible just with XI maping and no BIC MD mapping?</i>
    >>> No, You Cannot do it in only  with XI Mapper.
    First you need to use BIC Mapping in modules which will convert your EDIFACT format to EDI-XML.
    After this you need to Apply XI Mapping Which will Convert EDI-XML to your IDOC-XML.i.e. your mapping program.
    Thanks & Regards,
    Akshay Jamgaonkar.
    Reward Points For Good Answer .

  • Check mapping used in BIC module

    Hello gurus
    we have an EDI scenario. modules are used in the EDI receiver communication channels.
    Following is the processing sequence and module configuration of one of the channels :-
    Processing sequence:
    1    localejbs/Seeburger/solution/sftp         Local Enterprise Bean    solutionid
    2    localejbs/CallBicXIRaBean                  Local Enterprise Bean    bic
    3    localejbs/ModuleProcessorExitBean    Local Enterprise Bean    exit
    Module Configuration:
    bic    LogAttID                 ConverterLog
    bic    destEncoding          ISO-8859-1
    bic    destTargetMsg         MainDocument
    bic    mappingName         See_X2E_DESADV_UN_D93A
    bic    srcEncoding            ISO-8859-1
    bic    srcTargetMsg          MainDocument
    exit    JNDIName             deployedAdapters/SeeXISFTP/shareable/SeeXISFTP
    Is it possible to get the mapping that is used here i.e See_X2E_DESADV_UN_D93A to view or edit?
    I am new to BIC and BIC MD. I went through the documents that are available for mapping designer but i am now even more confused.
    The mapping designer can be used to output .xsd file which can be imported into the ESR as external definition and then graphically mapped to the IDoc. Then what is the purpose of this mapping separately and where can i find it??
    Appreciate any help coming my way.
    Regards,
    Xineohpi

    Hi Iphoenix
    The XSD file should be imported into ESR as an External Definition, so that it can be used as a source/target for graphical message mapping.
    As for the BIC mapping, this is deployed as an SCA file into the PI system. This is normally done via JSPM by the Basis team.
    Normally, if your partner is using X12 or EDIFACT, you might not need to change anything with BIC mapping. Only in cases where your partner's X12/EDIFACT definition deviates from the international standard, then you might need to adjust the BIC mapping accordingly using BIC MD.
    In the case where the standard is used, you just need to double check that Seeburger already provides that XML to EDI conversion mapping, and that it has been deployed by your Basis team (you can check in the Seeburger Workbench to see what has been deployed.) Once the BIC mapping is there, you use that mapping in the BIC module configuration.
    To summarize, for an IDoc to standard EDI interface, your main development/configuration effort would be:-
    i) Create graphical mapping from IDoc to EDI (XML format)
    ii) Configure communication channel to use BIC mapping for X2E conversion.
    Rgds
    Eng Swee

  • Seeburger - BIC configured as Module

    Has any one sucessfully used the BIC as module and convereted the EDI document to XML-EDI format and viceversa. I have configured the BIC as a module and i am running in to all sort of Isssues. Tried to use the Classifier Module to Classify the Message and all it could return was
    <classifier><type>AnsiX12</type>
    <classifierMappingID>null</classifierMappingID>
    <encoding>US-ASCII</encoding>
    <additionalIdentifier></additionalIdentifier>
    </classifier>
    Because the Mapping Id was Null and with the Information that classifier passed to the Bic Module it resolved the mapping name to See_AnsiX12  and i got the Functional Acknowledment in XML-EDI format.
    I got fed up and took out the classifier Module and Provided the mappingName as Parmeter for the BIC module and specified the MAP to be used as bic     mappingName See_E2X_ANSIX12_850V4010. Now when i try to Process the the 850 EDI File i get an error: ISA Segment Filed I15 is empty even though it has the value "/"
    trying to see if any one went through the headchae of Seeburger EDI Adapter and got it working.
    <b>Adapter Error:</b>
    Sender Adapter v1830 for Party 'Business_Partner_1', Service 'EDI':
    Configured at 19:15:57 2005-08-01
    Last message processing started 19:19:07 2005-08-01, Error: Module Exception 'com.sap.aii.af.mp.module.ModuleException: Adapter call failed. Reason: --- Conversion of synchronous request from module chain ended with errors ---[Error:ID=2088;LEVEL=3] FieldData checkInputSyntax(): Mandatory, incoming field is empty. Segment:'ISA', Field:'I15'
    DESCRIPTION: FieldData Error in Segment [not specified] incoming mandatory Field [not specified] is empty. Check class files.
    ' found, cause: javax.resource.ResourceException: --- Conversion of synchronous request from module chain ended with errors ---[Error:ID=2088;LEVEL=3] FieldData checkInputSyntax(): Mandatory, incoming field is empty. Segment:'ISA', Field:'I15'
    DESCRIPTION: FieldData Error in Segment [not specified] incoming mandatory Field [not specified] is empty. Check class files.
    last retry interval started 19:19:21 2005-08-01
    length 10,000 secs
    <b>Actual Input Document:</b>
    ISA00          00          ZZCA7045542000   14007944580RTE   0503240823U004000063519450P/
    GSPOCA7045542000007944580RTE2005032408236351945X4010
    ST8506351945
    BEG00SA450013584120050324*AC
    CURBYUSD*1.000
    N1SO922431
    REFZZ3000*PAORG-
    REFZZ903*PAGRU-
    PERCNMc JunkinTE5409215020
    PERCNNAFTA Purchasing OrgFX5409215030
    N1BTCONTACT THE PST AT 704-554-377892903
    N2*NO BILL-TO ADDRESS AVAILABLE
    REFZZ3000*PAORG-
    REFZZ903*PAGRU-
    PERCNMc JunkinTE5409215020
    PERCNNAFTA Purchasing OrgFX5409215030
    N1VN920001008751
    REFZZE*SPRAS-
    N1STNarrows, VA924022
    N2*Celanese Acetate, LLC
    N3*3520 Virginia Ave.
    N4NarrowsVA24124US
    REFZZE*SPRAS-
    REFZZVA*REGIO-
    PO10001025EA3.62PEPI0VN55159103IN*30300754
    PIDF***Pins,RETAINER #66267536008 FOR 3/4 DRIVE
    REFWO000050248591
    MSG*PINS, RETAINER #66267536008 FOR 3/4 DRIVE SOCKETS-LARGE, ,
    SCH25EA**06720050408
    N1STNarrows, VA924022
    N2*Celanese Acetate, LLC
    N3*CC SHOP
    N3*3520 Virginia Ave.
    N4NarrowsVA24124US
    REFZZE*SPRAS-
    PERCNtmckinne4381
    PO10002050EA3.62PEPI0VN55142194IN*30300755
    PIDF***Pins,RETAINER F/3/4 IN DRIVE SOCKET SMAL
    REFWO000050248591
    MSG*PINS, RETAINER F/3/4 IN DRIVE SOCKET SMALL #66267936007, ,
    SCH50EA**06720050408
    N1STNarrows, VA924022
    N2*Celanese Acetate, LLC
    N3*CC SHOP
    N3*3520 Virginia Ave.
    N4NarrowsVA24124US
    REFZZE*SPRAS-
    PERCNtmckinne4381
    CTT*2
    SE486351945
    GE16351945
    IEA1006351945
    Message was edited by: Sudheer Nagalla
    Message was edited by: Sudheer Nagalla

    Hello,
    I have forwarded your problem, do you have an OSS note open for this problem, already?
    At a first glance I think it is missing a deimiter at the end of the ISA segment, but thats just a rough guess. I can tell you tomorow.
    Greetings
    Bernd

  • Seeburger BIC mapping error(on changing mandatory fields)

    Hi Experts,
    I am working on IDOC to EDIFACT file scenario with seeburger.
    Earlier my end to end scenario was working fine. I got a requirement to change all the mandatory fields of segment NAD into non mandatory field. To acheive this i changed my Seeburger BIC mapping and target XSD in PI. After this process i create .sca file and ask basis to upload it.
    But after deployment i am getting error in communication channel where i am using BIC mapping. The error is message is quite big, still i am attaching a part of it. Please help
    Message processing failed. Cause: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: BICMapping: runMapping() FATAL ERROR: java.lang.OutOfMemoryError: Java heap space (failed to allocate 16777240 bytes) Stacktrace: java.lang.OutOfMemoryError: Java heap space (failed to allocate 16777240 bytes) at java.io.ByteArrayOutputStream.write(ByteArrayOutputStream.java:95) at java.io.BufferedOutputStream.write(BufferedOutputStream.java:105) at sun.nio.cs.StreamEncoder$CharsetSE.writeBytes(StreamEncoder.java:336) at sun.nio.cs.StreamEncoder$CharsetSE.implWrite(StreamEncoder.java:395) at sun.nio.cs.StreamEncoder.write(StreamEncoder.java:136) at java.io.OutputStreamWriter.write(OutputStreamWriter.java:191) at java.io.BufferedWriter.flushBuffer(BufferedWriter.java:111) at java.io.BufferedWriter.write(BufferedWriter.java:212) at java.io.Writer.write(Writer.java:126) at com.seeburger.jucon.dochandler.util.GrammarFileWriter.write(GrammarFileWriter.java:262) at com.seeburger.jucon.dochandler.EdiSegmentData.write(EdiSegmentData.java:234) at com.seeburger.jucon.dochandler.Segment.write(Segment.java:645) at com.seeburger.jucon.dochandler.EdiSegmentData.write(EdiSegmentData.java:390) at com.seeburger.jucon.dochandler.Segment.write(Segment.java:645) at com.seeburger.jucon.dochandler.EdiDocWriter.write(EdiDocWriter.java:367) at com.seeburger.jucon.dochandler.InhouseDocWriter.flush(InhouseDocWriter.java:884) at com.seeburger.jucon.mapping.Mapping.run(Mapping.java:2429) at com.seeburger.jucon.seebicapi.BICMapping.runMapping(BICMapping.java:1724) at com.seeburger.jucon.seebicapi.BICMapping.run(BICMapping.java:2518) at com.seeburger.jucon.seebicapi.BICMapping.startSyncMapping(BICMapping.java:1415) at com.seeburger.bicxiadapter.CCIInteraction.convert(CCIInteraction.java:1201) at com.seeburger.bicxiadapter.CCIInteraction.convertCalledFromModule(CCIInteraction.java:911) at com.seeburger.bicxiadapter.CCIInteraction.execute(CCIInteraction.java:313) at com.seeburger.xi.api.cci.impl.nw71.SeeXIInteractionProxy71.execute(SeeXIInteractionProxy71.java:86) at com.seeburger.bicxiadapter.module.CallBicXIRaBean.process(CallBicXIRaBean.java:384) at com.seeburger.xi.api.module.impl.nw71.SeeModuleAdapter71.process(SeeModuleAdapter71.java:78) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal
    java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:169) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:266) DESCRIPTION: BICMapping: FATAL ERROR: Internal Fault. Class could not be load or instatiated. Check Installation, access rights. Last error: java.lang.OutOfMemoryError: Java heap space (failed to allocate 16777240 bytes)
    Regards,
    Shradha

    Hi,
    Even I faced a Similar problem...
    1) make sure that the size of the data that is coming to BIC map is not larger than the size defined in the Source field (Check In BIC and SAP XI/PI map.
    2) Make sure id any other seeburger mapping are working fine , This is because you have to deploy the file in form of Active mapping.sca in SAP XI/PI after the changes are made on BIC side.
    3) Check the Adapter Engine Cache ...
    Hope this helps..
    Regards,
    Sainath Chutke

  • Seeburger BIC Mapping deployment issue in PI 7.1

    Hi experts
    We have upgraded from XI 3.0 to PI 7.1 and seeburger is also upgraded to  a compatible version.(2.x).
    Mappings_user.sda was used in 3.0 environment.
    But we are not able to deploy the same in 7.1. I think sda format is not supported in 7.1.
    Is there any way to convert .sda to .sca and deploy?
    Or how can we generate a compatible deployment file for 7.1?
    I have tried using BIC mapping designer,but it shows the option for .sda and .jar only.
    Thanks in advanceDhanish Joseph

    Hi
    I have installed BICMD  632 version and imported .BICMD project file.
    Then assigned sda/sca number to it and created deploy file.(Mapping_user00.sda).
    Then installed this in PI system using JSPM.
    I have tested allmost all the mappings successfully except one in PI system.(EDI 990 message).
    When i send data to PI  data comes to channel and it shows conversion error. But detailed information not available.
    In seeburger monitoring  the message goes to recovery mode.
    I have used the input 990 X12 and tested in Seeburger BIC MD. And there it is success!!!!!! So i am confused what is happening when it comes to PI system.
    I faced some issues>>>
    1.  while importing project file into BIC MD it asked for apply some autocorrection  for one map.(different than this). I have clicked on cancel
    2. When i assigned SDA number to my project i have selected 2.1.0  SDA version( 1.8.0 option was also there).
    Your prompt reply is greatly appreciated .
    Thanks

  • Error in Seeburger BIC Mapping

    Hi all,
    I am working on Seeburger BIC Mapping Designer.
    As i am starting off with it, i have planned to do a very simple scenario File to file.
    Source would be an XML and target also would be an xml.
    Compilation is fine, but while converting I am gettuing an error
    "[Error:ID=2023;LEVEL=1] InhouseDocReader readNextSegment(): offset[4(read Segment : KA\)]: caught ReadingException: Length limit exceeded - no SEG. delim. found!!!
    DESCRIPTION: InhouseDocReader causes an ReadingException while trying to read the next segment of current file, abort
    <<ErrorStreamEnd>>
    Conversion error "
    Please let me know what should be done.
    Even I have enabled SetIngnoreCRLF option in the source options.
    Cheers,
    Karthick

    Hi Karthick,
        Where do you get this error?
    In BICMD ?
    Have you created the E2X and/or X2E mapping programs in BICMD tool?
    Test it locally in the tool intself before deploying the mappings to XI server.
    Follow these steps to create a 1;1 mapping for XML to EDI and EDI to XML conversion program:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b66651-eeea-2b10-e5a6-8459ec30d948;jsessionid=(J2EE3414900)ID2060961950DB01298938248398894809End
    Regards,
    Ravi

  • How to import the IDOC into Seeburger BIC mapping designer

    Hi All,
    Can u please tell me how to import the IDOC into Seeburger BIC mapping desginer.
    I have scenario My scenario is SAP GTS 7.0.....>Seeburger BIS.....>Atlas customs system for Germany
    Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send
    to Atlas systeam.
    Regards,
    Ramesh.

    Hi Ramesh
    BIC is a tool from Seeburger to transmit the XML data to EDI and EDI to XML.
    Seeburger mapping programs for transferring the XML data to EDI data and EDI data to XML data, but not for the structure changing, in the IR your mapping program is same.
    Receiver side you need AS2 Adapter for converting data to EDI target structure. we have many EDI versions are available, for converting the EDI to XML or vice versa AS2 gives some default mapping programs, xml to EDI or EDI to XML convertion done through this mapping programs.
    Seeburger AS adapter provider provides some mapping programs(for example EDI4010 version or other), if you are using the same EDI version(4010) then you can use that mapping programs, if the version is different then we can manually generate the Seeburger X2E and E2X mappings for the corresponding version and signal(850 or 810 or ..), for this seeburger provides the mapping designer tool (BIC), there we can develope the X2E and E2X mapping programs and configure this in the Seeburger work bench.
    Regards
    Ramesh

  • Mappings_user.sca - Seeburger BIC Mapping Designer

    Hello experts,
    I have read SAP note 1353318 about how to start the BIC adapter on PI 7.1.
    Question: where do I get the file "mappings_user.sca" from? It says it is on the BIC Mapping Designer-CD, but the installation files I received via the Internet - I do not have the CD.
    Can I somehow create that file with the BIC Mapping Designer that I have already installed?
    Thank you for any hint you can give me!
    Best regards,
    Peter

    Hey peter,
                       go to your seeburger installation directorys bin folder and check for bicdesigner.ini file and add the  below cmd
    CmdLnArgX=-ProjectAdmin  where X will be 4 (i.e. count of cmd line agrs used ) .
    Then start the bic mapping designer tool and go to tools option there you can see a new option called Assign Projects to SDA, after that you can create a deploy file..This is new option provided by seeburger bic so that only project Admin can have rights of creating the deploy file.
    If you still face any problems post the same..
    HTH
    Rajesh

Maybe you are looking for

  • Free of charge Order Process/ Release Delivery block

    hi all, i am new to Workflow. i have a issue to be done in wrokflow. The work flow has to be incorporated with Free of Charge order process.  The work flow process will allow a delivery block / credit block to be released only based on  authorized us

  • Getting Error 404 when trying to open php documents in DW CS3 Test server

    I am new to DW, php, MySQL and Apache. I have set up a test environment but obviously have done something wrong. I currently create my web pages from scratch in notepad and update my site with a GUI FTP program, but I know with these new tools, I wil

  • Can t buy book from iphoto

    i can t buy a book, i ve got the message " an error occured uploading your order", i re tried many times in vain

  • Not able to start EM on Windows2003

    Install went through fine for DB server, however, DBConsole is failing to come up, any one seen this before? E:\oracle\product\10.1.0\bin>emca -r STARTED EMCA at Fri Aug 19 17:20:18 IST 2005 Enter the following information about the database to be co

  • Can't access iTunes library.

    I've turned home sharing on and off several times on the MBP and the ATV (2 gen) and even tried rebooting the ATV but my itunes library can still not be found.  Other features of ATV are working fine and my photo stream can be brough in.  What am I d