Seeburger - CPALookupException error

Hi,
In my testing environment, I'm pulling EDI doc's from my VAN but nothing is triggered in XI.  After putting the Seeburger FTP on debug, I was able to find this error message:
CPALookupException: Couldn't retrieve binding for the given channelid... 
Usually this is related to cache problems but in my case, it's all good!  So any idea on what to do here?
Rgds,
Yves

HI,
Check out with CPACache refresh- like this-
http://<server>:<port>/CPACache?refresh=full
Also check the configuration in XI once. And try to reactivate the configuration objects like sender agreement.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards,
Moorthy

Similar Messages

  • Seeburger : DECRYPTION ERROR

    Hi guys,
    I'm having the following error :
    I'm using Seeburger AS2 adapter and I'm trying to receive a message from an external partner.
    I've the corresponding configs on the sender agreement from the external partner:
    sender agreement
    Sender Configuration
         Authentication Certificate : \AS2\testPartner     
    Receiver Configuration
         Decryption Key: \AS2\testMykey
         Signing Key: \AS2\testMyKey
    And I'm getting the following error
    Error while parsing AS2 message: DECRYPTION_ERROR # Error while loading decryption certificate: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: There is no key entry with such alias in keystorecom.seeburger.ediint.edi.EDIMessageException: cannot decrypt message (certificate or private key missing)
    I've tried several certificates, generated other keys but the error is always the same....
    It seems that the alias is not found? But it's there...
    Does anyone had the same problem?

    Hi Peter,
    Thanks for your quick response.
    I'll restart the J2EE Engine and I'll give you feedback. Thanks for remembering.
    I've noticed that you used on the receiver agreement the partnersKey for the encryptionCertificate. It was a mistake, right?
    "receiver agreement:
    Signing Key: TRUSTED/AS2/AS2myKey
    Encryption Certificate: TRUSTED/AS2/partnersKey
    Authentication Certificate: TRUSTED/AS2/AS2myKey"
    it should be
    "receiver agreement:
    Signing Key: TRUSTED/AS2/partnersKey
    Encryption Certificate: TRUSTED/AS2/AS2myKey
    Authentication Certificate: TRUSTED/AS2/AS2myKey"
    Right?
    Again, thanks for your quick reply.
    P.S. - I'll give you feedback on the other threads. I'm doing stress tests with my external partner, and literally stressed tests

  • Seeburger Module Error at Compilation Time

    Hi,
    I am using the below modules for configuring the EDI P.O (850) scenario, Initially I am taking the EDI file to one folder up to this fine, after that I am processing this file by using sender File adapter with modules, at the compilation time i am getting this error
    "Error: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of SeeClassifier."
    Sender file adapter modules
    Processing Sequence:
    1     localejbs/SeeClassifier     Local Enterprise Bean     classifier
    2     localejbs/CallBicXIRaBean     Local Enterprise Bean     bic
    3     localejbs/Seeburger/MessageSplitter     Local Enterprise Bean     splitter
    4     localejbs/CallSapAdapter     Local Enterprise Bean     exit
    Module Configuration:
    bic                classifierAttID                     additionalInfo
    bic                classifierMappingID            additionalInfo
    bic                destSourceMsg                  MainDocument
    bic                destTargetMsg                   MainDocument
    bic                mappingName                     AUTO
    bic                splitter                                splitter
    classifier      destSourceMsg                 MainDocument
    classifier      showInAuditLog                true
    Thanks
    Ramesh
    Edited by: Venkataramesh Boppana on Nov 8, 2010 8:55 PM

    Hi Ramesh,
    "...Object not found in lookup of SeeClassifier..." means, that the Classifier module can not be found.
    Did you deploy SeeBaseTools and SeeExtendedTools and SeeModuleCollection?
    regards,
    Daniel

  • Reg:Seeburger BIC Error

    Hello All,
    I was working on XML to EDIFACT Map in BIC Mapping Designer in seeburger,I am getting following Error while running the map:
    [Error:ID=3056;LEVEL=1] InhouseDocWriter setField() Error: Exception at create or setField(UNB.SG0.UNH:S009.0065) :
    java.lang.Exception: Segment not allowed here (UNB:SG0).
    Any one please guide me reg this issue.
    Thanks,
    Kishore

    Hi,
    Can you explain about your mapping?
    Could you quote your result for message mapping test tab?
    Regards,
    Sushama

  • Seeburger AS2 error: No Trusted Certificate found

    Dear SAP experts,
    Good day!
    Need your expert advice regarding the error that I am getting in Seeburger AS2.
    Here's the scenario:
    SAP XI is sending messages to Trading Partner via AS2 adapter which resides in Seeburger.
    I've trigerred already messages but they are getting this kind of error:
    Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found # , SEEBURGER AS2: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found # : javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found # , SEEBURGER.
    Kindly advice if there are missing or invalid certificates on both sides?
    What would be the cause of the issue?
    Many Thanks!
    Godo

    Godo,
    I think you are using secure communication for your seeburger CC. Can you pls. check if you have installed(keystore) certifcate on J2EE engine and configured certificate provided by ftp client in your CC.
    Also one more important thing,
    Make sure that you have entry with ftp server name and correspoding ip address in hosts.inc on a system where your adapter engine resides.
    Check detail error messsage at:
    http://XI server : port / nwa --> Message Monitoring --> Logs and Trances and select DefaultTrace in second drop down list. You will find all events details with description. ( If you run your interface and check you will find recent activities on XI server. Hope this will give you much better picture)
    Hope this will help.
    Nilesh

  • PI Seeburger AS2 Error: Object not found in lookup of as2..

    Hi ALL
    Can you please help us understand which object the following error refers to....
    Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2..
    Your help is greatly appreciated!!
    Thank you,
    Patrick

    Please check the module chain (module configuration). Very likely reason is that you have the solutionid module as2 defined (which is default) but forgot to deploy the solution id module (you can find it in the distribution tools folder. Name of the deploy file: SeeXISolutionIdModule.ear).

  • Seeburger ResourceException error for FTP/VAN adapter

    Hi all,
    I'm trying to connect to VAN using FTP/VANadapter...I created the resource in the Seeburger workbench...but still I get the following error:
    Information Message entered AF MP exit bean and will be passed to the JCA adapter now.
    Error Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: Cannot create reservation, reason: Resource not available for reservation!; affected object : Resource (type:LOGICAL/id:ftp_gxs/name:ftp_gxs), Cannot create reservation, reason: Resource not available for reservation!; affected object : Resource (type:LOGICAL/id:ftp_gxs/name:ftp_gxs)
    Error Adapter Framework caught exception: Fatal exception: javax.resource.ResourceException: Cannot create reservation, reason: Resource not available for reservation!; affected object : Resource (type:LOGICAL/id:ftp_gxs/name:ftp_gxs), Cannot create reservation, reason: Resource not available for reservation!; affected object : Resource (type:LOGICAL/id:ftp_gxs/name:ftp_gxs)
    Error Delivering the message to the application using connection FTP_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: Cannot create reservation, reason: Resource not available for reservation!; affected object : Resource (type:LOGICAL/id:ftp_gxs/name:ftp_gxs), Cannot create reservation, reason: Resource not available for reservation!; affected object : Resource (type:LOGICAL/id:ftp_gxs/name:ftp_gxs).
    Any inputs to what I have to do??
    Thanks,
    Srini

    Reservation is not getting created...I can create a resource...assign it to a server but I don't see any reservation getting created...all I can see is RecoverTimer_DEFAULT in the reservation, but not for the resource which I created...
    Thanks,
    Srini

  • Seeburger Adapter Error

    Hi Everyone,
    I am trying to send messages to a VAN using Seeburger. However I am facing the following error
    Message processing failed. Cause: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at solution, the whole lookup name is localejbs/Seeburger/solution/van
    I have seen other threads with same error however unfortunately after resolution no has posted the solution. Can I please request some help with this.
    regards

    Hi,
    you are trying to execute a Module in the Module Chain which does not exist ("localejbs/Seeburger/solution/van")
    For testing, you can remove this module from the module chain. If there are no other errors in your configuration, you should be able to use this channel now. However, you also should deploy the missing module ("localejbs/Seeburger/solution/van") in order to have a standard configuration, which includes the Solution Module.
    regards,
    Daniel

  • Seeburger AS2: Error while parsing AS2 message: AUTHENTICATION_ERROR #

    Hello all,
    unfortunaltey we get follow error back, if we receive a message from our partner:
    Error while parsing AS2 message: AUTHENTICATION_ERROR #
    The channel setup is correctly ( I think)
    (Sender Agreement:)
    By the Aapter-Specific Attributes:
    AS2 Sender Configuration
    Authentication Certificate: <Certificate of the Partner>
    AS2 Receiver Configuration
    Decryption Key: Private Key from us
    Signing Key: Private Key from us
    The MDN Channel has setup follow:
    AS2 Sender Configuration
    Authentication Certificate: <Partner Certificate>
    The AS2 Communication Channel has setup as follow:
    AS2
    disable Authentication required
    Asynchrones MDN
    Server Certificate <Partner's Certificate>
    Private Key for Client Authentication is empty
    But always we get the message back as I put in the topic.
    Any ideas ?
    Thanks for your help

    Hi Stephen
    From the configuration side everything looks fine.
    I strongly believe that some configuration at your partner side must be wrong.
    For testing purpose,  if you have BIS Spoke please create a dummy  configuration and send message to PI.
    First test with Disabling certificate authentification and  then with certificate
    Regards,
    Dhanish

  • AS2 Seeburger error troubleshooting

    Hi,
    I just would like to ask if anybody knows how to troubleshoot errors on AS2 Seeburger.  We usually have the below errors in the Seeburger Monitor:
    - Error on send, will not be retried     Could not send ansynchrone MDN to partner!
    - Error on receive, task will not be retried     Cannot initiate received message to backend system AND max retry reached!
    - Error on receive, task will not be retried      Could not send ansynchrone MDN to partner - url not set!
    - Initiation to Backend Pending                    Could not send ansynchrone MDN to partner!
    - MIC error
    Do you happen to have materials about Seeburger which shows how to resolve and prevent such issues?  I also need to get the root cause of these issues, can you kindly help me identify the actions I need to take to get to the root cause?
    I look forward to hearing form you.
    Kind regards,
    Grace

    - Error on send, will not be retried Could not send ansynchrone MDN to partner!
       1. Tell Business partner to not to request MDN when  they send document to you.
       2. check the authentication certificate in your sender agreement
    - Error on receive, task will not be retried Cannot initiate received message to backend system AND max retry reached!
       1.Sender might be using wrong certificate.
    - Error on receive, task will not be retried Could not send ansynchrone MDN to partner - url not set!
      same like first answer
    - Initiation to Backend Pending Could not send ansynchrone MDN to partner!
    same like like first answer
    - MIC error
    valide sender is not identified, check the AS2 id and certifcates

  • Seeburger adapter monitoring

    We are running Seeburger AS2 adapter with XI3.0.
    All inbound messages that the adapter can handle are passed to XI and we have access to those from XI message monitoring.
    From there we have alerting setup.
    Whenever an external party presents a message with a bad certificate the AS2 adapter refuses the message.
    We can see trace of that in the adapter monitor. But there is no message in error passed to XI. So nothing we could get in message monitoring.
    We saw we have a logfile containing those errors on the server. We could setup a logfile monitor on this file and get errors in CCMS. And from there, we could trigger alerts. But that does not look very elegant.
    Is there a best way to get Seeburger adapter error generating alerts ?

    Hi,
    If the check is happening in the Adapter then the Alerts needs to be raised by Adapter framework.
    So you have to set up Alert rule for the Adapter framework.
    The message goes to message montioring only if the adapter sends the date to the Adapter engine and then you can see the message in the message monitoring.
    If the rejection is at AF levelt hen you need to check in the Communication Channel if you are getting the Error?
    Regards
    Vijaya

  • EDI 810 signal

    Hi Experts,
    I need a small help. currently I'm working on scenario wherein XML file is sent to customer via EDI. The PI system picks up the XML file and convert it into EDI 810 ANSI X12 5010 Version and sends to customer. The problem is PI system generating EDI XML and while sending it to Seeburger below error message is showing Runtime Workbench.
    MP: Exception caught with cause javax.resource.ResourceException: --- Conversion of synchronous request from module chain ended with errors ---[Error:ID=3069;LEVEL=3] SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment S_ST found: 0 instead of 1 offset :2175 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment S_ST ([not specified]/[not specified]).
    I copied the EDI XML data and executed in BIC and it is converting into EDI ANSI X12 format, but failing in RWB. Can anybody help me out. Let me know how to resolve it?
    Thanks
    Faisal

    HI Failsal,
    From error message i could see that, the segment S_ST should have a value 1. In Module parameter you should modifiy the parameter for this segment and check your scenario, because method checkAndResetChildrenCounter() expects the S_ST to be repeated atleast 1 times not 0 times.
    Regards,
    RK

  • As2 receiver channel, SEEBURGER AS2: 500 Internal Server Error

    Hi,
    There is one scenario in our landscape, its running in production, Proxy to As2. The interface working fine for last 2 weeks, today its showing error in As2 receiver channel saying
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 500 Internal Server Error # , SEEBURGER AS2: 500 Internal Server Error #
    I have searched in forum, but couldnt get much idea on why this error encounters and how can we resolve it.
    Kindly provide your inputs to help me resolve this.
    Thanks,
    Ruchi

    Hi Ruchi,
    500 means the requested server does not understand the request (the requested service is unknown). The reason is obvisiously outside of PI. You have to contact the 3rd party owner and ask why the system is refusing the request instead of responsing like before.
    Regards,
    Udo

  • Error in Seeburger Message Monitoring

    Hi ,
    I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file.
    I m getting error in seeburger message monitoring with status as "Could not send ansynchrone MDN to partner - url not set!". can anybody tell me whats the reason behind it,where it went wrong.

    Really didn't understand your scenario. That sentence makes no sense:
    "I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file."
    But what I understand from the error message you have provided...................
    if you are using Seeburger AS2 adapter as Receiver Comm Channel..........then there is definitely some cofig error is settings for MDN acknowledgement.
    Under Parameters Tab:
    You must have set the following parameter
    MDN Mode = "ASYNC"
    And has not provided the following parameter just below it :
    Receipt Delivery Address
    This parameter should have value: the URL of your own AS2
    server where the asynchronous MDNs are
    to be delivered.
    Hope this solves your problem.
    Regards,
    Suddha

  • Variable substitution error while using Seeburger module parameter

    Hi Freinds,
    I would like to use the variable substitution in a receiver file adapter to add the invoice no.
    (which is contained in the XML file) to the target filename.
    In addition I have to convert the XML file to an X12 EDI format using the seeburger module "localejbs/CallBicXIRaBean".
    As soon as this entry is made in the modules the following error message occurs:
    "com.sap.aii.adapter.file.configuration.DynamicConfigurationException:
    Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException:
    Caught SAXException while parsing XML payload: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:
    XMLParser: No data allowed here: (hex) 53, 4f, 48(:main:, row:1, col:3)"
    My problem is that the conversion from XML to X12 EDI is done before the variable substitution is started.
    That`s why the reference for the variable is no longer valid as the file is already converted to a X12 EDI (=flatfile) format.
    If I disable one of the two steps (either 1:1-mapping or variable substitution) the other step runs properly.
    Has anybody an idea how to solve this topic?
    Is it possible to specify the variable substitution as module?
    If this is possible I could solve it by just reordering the two steps in the module chain.
    Regards
    Venkatesh

    Use Dynamic Configuration Bean to set this value. You have to use this well before "localejbs/CallBicXIRaBean".
    Check SAP note : 974481 for more information.
    Blog: [/people/jin.shin/blog/2007/04/27/sap-netweaver-xi-variable-substitution-with-adapter-specific-message-attributes-via-dynamicconfigurationbean|/people/jin.shin/blog/2007/04/27/sap-netweaver-xi-variable-substitution-with-adapter-specific-message-attributes-via-dynamicconfigurationbean]
    Second Approach if the above approach doesnt work.
    Use Dynamic Configuration concept in UDF to set the filename under message Mapping.
    Thanks,
    - Gujjeti.
    Edited by: Praveen Gujjeti on Feb 25, 2009 11:25 AM

Maybe you are looking for