Seeburger mapping licence fee in PI 7.1

while using Seeburger mapping is there licence fee required to pay or it is free in PI 7.1

If no discount is given, you pay 75K. Depending on discount you might endup paying 18K(for 75% discount), 45K (for 40% discount).
There is genrally a maintaince fee(that applies in general for any software product. As such SAP products also have this fee) & is generally 20% or 30% of the price at which it is bought. So annually you might pay 6K (30% of 18K) for ongoing support/ newer patches of the product.
As you might be aware that XI is license is Volume based, so are seeburger adapters.
-SM

Similar Messages

How to... fetch SeeBurger Mapping Variables from a BPM

Hi,
I am currently having a problem in fetching some values on the Seeburger Mapping Variables from an BPM. What I currently do is the normal way of fetching the value using an UDF in my message mapping: below is the sample code that I did on my function:
import seeburger.functions.permstore.impl.;com.seeburger.functions.permstore.;
try {
   VariableBeanServlet vbs;
   vbs = (VariableBeanServlet)VariableFactory.getVariableInstance(VariableFactory.PROPERTY_CLASSNAME_DEFAULT);
   return vbs.getStringVariable(a);
}catch(PermstoreException e){
   return "";
did i missed something on my code?
best regards,
mike

The values are written on the Seeburger --> MappingVariables under Variables section. These has been predefined by me beforehand. I've checked the code without passing thru the BPM and it works but when it was used with the BPM the values doesn't turn up..
best regards,
Mike

Seeburger Mapping See_E2X_ORDERS_UN_D96A

Hello,
I was using See_E2X_ORDERS_UN_D96A mapping in our scenario but then we had a problem with special characters where the message used to fail at Seeburger level whenever it contained Special characters(Russian)
Then I created my own mapping E2X_ORDERS_UN_D96A where I set an option setDestinationEncoding= UTF-8.
Now,message is not failing at Seeburger,but I cant see any special characters.
I cannot see the original file sent by the partner ,but looking at the result available in XI message ,I believe ,Seeburger mapping is cutting down these special characters,they are not even reaching XI.
Has anybody observed this behavior?
Is there any way,I can get special characters in XI?
Thanks in advance.
Regards,
Shweta

Hello,
In the worst case, if we assume that Seeburger deletes these special characters ,the problem gets severe when we receive data as:
ABCXYZ hvcdjjfvhgfvfdvjfgvb НАУШН/ПРОВОД СЕРБР:ATLANTA SEEBURGER123
in such cases,it produces output as:
ABCXYZ hvcdjjfvhgfvfdvjfgvb НАATLANTA SEEBURGER123
i.e.It deletes : which separates two fields along with special characters like СЕРБР
Now,this field can have a specified maximum length,but as it is merging next field as well (ATLANTA SEEBURGER123)
length goes beyond maximum value and it fails at Seeburger even though they are sending data of correct length
We need to handle this somehow .
Kindly suggest.
Thanks.
Regards,
Shweta

Ovi Map licence on N96, error code 3 when i want t...

Hello,
I tried to buy map licence 9.99 euro for 1 year. but when it's confirming, it showed error code 3. I don't know what's happen. So how can i do? And do you have another way to buy the licence? example via internet, IDEALI live in Netherland)
Thank you

I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.

Converter Error in Seeburger Mapping Designer

Hi,
I try to convert an ANSIX12 document from EDI to XML with the Seeburger Mapping Designer, but I have an error:
Converter Error or Warning:
[Error:ID=2023;LEVEL=1] InhouseDocReader readNextSegment(): offset[1211(read Segment :
)]: caught ReadingException: Length limit exceeded - no SEG. delim. found!!!
DESCRIPTION: InhouseDocReader causes an ReadingException while trying to read the next segment of current file, abort.
If I check the "setIgnoreCRLF" in the "Source Options", the mapping works, but when I deploy the mapping to XI, I have the same error, on the deploy, the map not recognize the "setIgnoreCRLF" within XI.
How can I deploy this check to XI or how I do to mapping ignore the CRLF without the "Source Options"??
Greetings,
Hervey

Hi,
I am also facing same problem.
How did you corrected your file.
Do I need to redeploy my mapping on PI
Regards,
Akshay.

Need Seeburger Mapping name for DESADV .

Hi All,
I want the Seeburger mapping name for DESADV .
The format of the file is ANSI file.
Also i want the folder name or standard number for DESADV ??
I mean like for Orders the folder name will be " ANSIX12_V3020_850 "
Kindly let me know asap.
Thank You.
Regards
Seema.

Hi,
    These are the few naming conventions that will be followed while doing mapping in SEEBURGER BIC mapping designer.Let me know if they help u in any way..
ADOPTED NAMING CONVENTIONS
1 - For Application Rules:
DOCUMENT_APLLICATION_DIRECTION_DATA (FILE EXTENSION FOR REFERENCE)
Length for each:
Document = 3     Samples of: PUR, POC, POA, ASN, TXT
Application = 4   Samples of: RECL, SOMS, HRMS, CORP, COMS, CONT
Direction = 1       Samples of: I or O
Data = 3              Samples of: DAT, XML, RPT
NOTE: Since spaces are not allowed in the names, S will be used as filler .
Sample Application Naming:
For 824 for Banking doc   TXT_CORP_I_RPT
2 - For Project Rules:
We decided that we would group these by related documents. Ex. All POs would be together.
Following are the Project definitions:
ORDERS (PURCHASING) = 850, 880
BANKING = 820, 824 (Related to the banking 820 only)
TRANSPORTATION = 404, 858, 856, 940, 945, 990, ..
INVOICING = 810, 857
TEXT = 824, 864, 870
INVENTORY = 852, 830, 846,..
3 General Rules:
1- IF mapping is the same with HRMS & COMS
      THEN Use CONT for Application
    ELSE Use HRMS or COMS (which ever is appropriate)
2- IF document is the same for the entire corporation
       THEN Use CORP as the Application
3- IF Generic
      THEN No Suffix is required
     ELSE Trading Partner Specific maps add the suffix
For Trading Partner specific rules, add the Name extension to the end of the rule
Thanks .

Seeburger Mapping Name for ORDERS EANCOM D01B format

Hi Experts,
Can anyone please let me know the Seeburger mapping name for ORDERS_EANCOM_D01B format.
See_E2X_ORDERS_EANCOM_D01B doesn't seem to be working.
Thanks.
Regards,
Shweta

Log on tothe physical system of the XI system, go to the Seeburger folder(Usually found in the D Drive).
Something like D:/Seeburger/HT/EDI Message Catalog/
Then look into the Folder corresponding to your EDI Standard/Message/Version combination.
YOu will find 3 files in the folder.
In that you will find a file name starting with msg_<XXXXXX>
YOu can get an Idea of the Mapping name because the mapping name would then be See_E2X_<XXXXXX>

Seeburger mapping name required for ASN

Hi
I am trying to use the Seeburger AS2 adapter to send ASN (Advance shipping notification) to our partners.
The format of the EDI file is EANCOM2002. I want the standard Seeburger mapping name which will convert from xml to EDI EANCOM2002 format for ASN message.
Thanks in advance.
Shantha

If you are expecting the naming conventions for SEEBURGER Mapping (BIC Mapping designer) here are few .Let me know if they are useful.
ADOPTED NAMING CONVENTIONS
1 - For Application Rules:
DOCUMENT_APLLICATION_DIRECTION_DATA (FILE EXTENSION FOR REFERENCE)
Length for each:
Document = 3 Samples of: PUR, POC, POA, ASN, TXT
Application = 4 Samples of: RECL, SOMS, HRMS, CORP, COMS, CONT
Direction = 1 Samples of: I or O
Data = 3 Samples of: DAT, XML, RPT
NOTE: Since spaces are not allowed in the names, S will be used as filler .
Sample Application Naming:
For 824 for Banking doc TXT_CORP_I_RPT
General Rules:
1- IF mapping is the same with HRMS & COMS
 THEN Use CONT for Application
 ELSE Use HRMS or COMS (which ever is appropriate)
2- IF document is the same for the entire corporation
 THEN Use CORP as the Application
3- IF Generic
 THEN No Suffix is required
 ELSE Trading Partner Specific maps add the suffix
For Trading Partner specific rules, add the Name extension to the end of the rule.

IDOC to EDI Seeburger Mapping Issue

Hi,
I am new to seeburger, Currently I am working on PAYEXT IDOC to EDI scenario using seeburger adapter.
As per my little knowledge i can understand that i need two step mapping:
1) IDOC XML to EDI XML
2) EDI XML to EDI
Now the problem is how can i do 1st mapping if i have to do 1:1 mapping in PI mapper than it will be a tedious task as I dont know which idoc field is mapped to which EDI XML field.
Also i dont know how i can map the 2nd mapping.
when we installed seeburger adapter than i got three files from basis guys related to PAYEXT
msg_PAYEXT_UN_D96A.xml
msg_XML_PAYEXT_UN_D96A.xml
XML_PAYEXT_UN_D96A.xsd
Note: I imported .xsd file in IR, but i dont know what to do with these xml files.
Please experts reply soon as it is delaying my project
Regards,
Shradha

Shradha,
You can check the seeburger software component versions where all the mappings would be provided by Seeburger as part of the package.
You can have a look whether PAYEXT is there and would be useful
To start with
1. You need a functional or EDI Business analyst to guide you on the various mapping specifications needed.
2. You should also liase with your business partners to prepare an business rules and other conditions.
3.Also decide whether you are going to deliver it via AS2 communication or via VAN
4. Accordingly you need to configure the seeburger adapters.
5.The mappings provided to you are from XML to EDI and EDI to XML which is a second stage automatically done by seeburger once you specify the module steps in the comms channel.
I am afraid that without knowing business rules or mapping specifications, you can't work on EDI.
Regards
Krish

Seeburger Mapping

Hi,
I am venkatesh , working on EAI mainly in EDI mapping with tools like GXS,Gentran...
I have knowledge on SAP XI.
I have gone through all the links/threads specified in the SDN regarding seeburger and I have also seen some material on configuration of seeburger adapter to XI but
I need training material (pdf,ppt)on Seeburger EDI mapping or seeburger BIC mapping guide or any document which tells how to use the BIC mapper in detail in seeburger with SAP XI.
Can anyone help me on this..Your help will be really appreciated..
My mail id is [email protected]
Thanks and Regards
Venkatesh

hi
Go through below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Thanks

Pls.. Help Needed.. Seeburger Mapping Names..!!

Hi All,
Can any one help me with the default Mapping Program names supplied by SEEBURGER for both inbound and outbound.
EDI Orders
EDI Order Ack/Confirmation outbound
Delivery
Invoice
Also pls clarify below questions if you have an idea.
1. I heard that the XSD's will be already available for all the standard EDI message types.?? If Yes, we can i get them?? I mean which location in the server do i get them.
2. Is it mandatory that i need to use Only AS2 adapter to call the below Seeburger modules.?
Is the below sequence is correct??
Process Sequence :
localejbs/callBicXIRaBean bic
localejbs/ModuleProcessorExitBean exit
Module Configuration :
bic mappingName See_E2X_ORDERS_UN_D96A
exit JNDIName deployedAdapters/OFTP/sharable/OFTP
Thanks in Advance.
Regards
Seema
Message was edited by:
 reddy seema

Hi,
Check some links on Seeburger.
http://www.seeburger.com
Please see the below blogs
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards,
Phani
Reward Points if Helpful

Error Seeburger Mapping Designer

Hi Experts.
I have an Scenario file to file and I try to convert an ANSIX12 document from EDI to XML with the Seeburger BIC, but I have an error:
- Conversion of synchronous request from module chain ended with errors ---Error: [Error:ID=2023;LEVEL=1] InhouseDocReader readNextSegment(): offset[1085(read Segment : )]: caught ReadingException: Length limit exceeded - no SEG. delim. found!!!, Trace:
I check the "setIgnoreCRLF" in the "Source Options", and the the mapping works on Seeburguer, but when I deploy the mapping to PI, I have the same error, on the deploy, the map not recognize the "setIgnoreCRLF" within PI.
Anybody Help me?
Edited by: Luis Ortiz on Jul 17, 2009 12:36 PM

HI,
You have two option to reslove this error ...
1)If you are called BIC module with Mapping Name is Auto then you need to call the Classifier module in Communcation Channel.
2)you just call the BIC module with Mapping Name is "your mapping name not Auto option "what u deployed in PI server.
Regards
ramesh

Character encoding in Seeburger mapping

Hello all,
In my EDI project, i use Seebruger EDI Adapter.
We have discover a problem when you use french character has é, è, à, etc... In fact, Seeburger see the "é" has A@A, it convert the letter so when we arrive in the bic mapping of seeburger it crash down because for him, the field is too long.
exemple :
Field 1 after integration engine (limit on 4 characters in bic mapping) : éert
Field 1 interpreted by seeburger : A@Aert => so we are above the authorized limit.
I know that we send message in UTF-8 but i am a little bit surprise that Seeburgerr doesn't read UTF-8.
Is someone has an idea ?
Regards,
JP

Hi,
Well, you could use a JavaMapping logic to correct that, but if you want it to do it with seeburger tools for that cases you need to use the module ReplaceString in seeburger:
In the "Module" option of the channel, you have 2 parameters, "Processing Sequence" and "Module Configuration"
There you need to do the following:
Processing Sequence:
Module name: localejbs/Seeburger/ReplaceString
Module Type: Local Enterprise Bean
Module Key: 1 <= key for calling that sequence
Module Configuration:
Module Key: 1
Parameter Name: searchString
Parameter Value: "à" <= search value
Module Key: 1
Parameter Name: replaceString
Parameter Value: "a" <= replace with
You would need to do that for every character you have, when you save the order would probably change leaving replace first instead of search, but i'll work anyway, that doesn't affect anything
Hope you find that helpful,
Regards,

Seeburger - Mapping Variables

From the Seeburger Workbench there is a tab "Mapping Variables" -- Is there a document or a blog entry that discussing reading these values in an operation mapping, and/or using the attribmapper module?

You can read the counter and varible in java mapping., You also need to import jar file SeeCommonCollection PI.jar and SeeFunctionPI.jar
Reading (and incrementing)
a counter
try {
CounterBean be=CounterFactory.getCounterInstance();
return "" + be.nextCounter("COUNTERNAME");
} catch (Exception e) {
throw new RuntimeException(e);
Setting a variable
try {
VariableBean
be=VariableFactory.getVariableInstance("");
be.setStringVariable("VARIABLE",value);
return "";
} catch (Exception e) {
throw new RuntimeException(e);
Reading a variable
try {
VariableBean
be=VariableFactory.getVariableInstance("");
return be.getStringVariable("VARIABLE");
} catch (Exception e) {
throw new RuntimeException(e);

PI Seeburger Map Problem

Hi,
Plzz help me on this issue,
I am working on edi to idoc scenarion using seeburger.
I want to map EDI850 to Idoc. In PI Repository I have standard Mappings with version 4010.BUt,
I need Version 4030 Mappings. Where do i get these version mappings.
Can use same version mappings. Plzz help me on this.
Thanks,
Singh.

Hi Seenu/Singh ( Why mutiple names??),
When you say mappings, there are two types of mapping in Seeburger EDI scenarios.
1) EDI2XML, XML2EDI mappings which convert the ED formatI to XML and vice versa.
2) The actual EDIXML data to the IDOCXML data.
The first type of mappings, you should use BIC mapping designer to develop and then deploy in the PI server.
The second mapping, you have to create in your Integration repository(Within PI system).
The External definition that you see is not the one you want.
If you want to map the IDOC to the EDI 850 V4030, then you should do the following.
1) Login into the physical server of the PI system using Remote Desktop (The userid and pwd are not the ones u use for logging into IR or ID. Contact your basis team to get access to the physical server of PI system)
2) Open the file explorer in that system and navigate to a directory by name seeburger. Inder that you have to search for XSD file corresponding to your EDI Document and version.
3) Copy that file and paste it on your desktop.
4) Then open your IR.
5) Right Click on the external definitions node and click on new.
6) Then import the xsd file which is now tehre on your desktop into PI system.
7) Now, create a message mapping under the mappings node.
8) Drag your IDOC structure as the source and External Definition as your target.
9) Then you can do your mapping as per the requirement.
Regards,
Ravi Kanth talagana

Seeburger mapping licence fee in PI 7.1

Similar Messages

Maybe you are looking for