Seeking Flash Development "Guru" in New England

Am seeking avenues for finding expert-level Flash developers
in the New England area, especially eastern and central
Massachusetts.
We are now encountering more-than-occasional call for Flash
development expertise, and I'd like to have a short list of
reliable, "Guru"-level Flash developers to call upon for such
projects. Are there any resources either through Adobe or through
other places on the 'net to find such expertise? This would be
Flash at a sophisticated level, as for developing fully interactive
training materials.
Suggestions, or recommendations, anyone??

there's a job forum where you may have luck finding someone:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=38&catid=219&entercat= y
but if you don't need face-to-face meetings, you don't need
to limit yourself to someone in your area.

Similar Messages

  • Looking for FLASH developer/guru to create a Flash Intro for a Clan Site.

    I am looking for a FLASH developer to create a custom FLASH
    Intro for my gaming clan forums.
    A bit about us:
    Clan Name: =bURnT=
    Site:
    http://burnt.swisshut.com
    Games Played: Battlefield 2 & Battlefield 2142
    What we would like in the Intro:
    - That it somehow complements our forums
    - Includes the clan name
    - Looks professional and loads within reasonable time
    - Some sort of music / background soundtrack
    We are a small clan and don't have the biggest budget but
    please consider us and give us a estimate of price if you are able
    to do this for us.
    Regards,
    Dieter Balmer (OzButcher)
    [email protected]

    ..please visit my personal site
    http://bizgraphix.com
    ...thanks

  • Desperately seeking Flash design guru

    The market's red-hot at the moment and with that you Flash
    guru's are now at the centre of the universe. My client is one of
    Melbourne's top design houses with blue chip work banking up.
    They're soooo desperate to attract the best that the cheque book is
    open. So if you have at least 3 years experience in Flash design
    and have built sites that glide so beautifully that the user just
    wants to close them down so they can see them load again - then we
    need to talk.
    Contact NEWMEDIA PEOPLE by email [email protected]
    or call Denis on 03 8610 8380
    Hope you can help
    denis

    I posted earlier in a different forum about design
    patterns. I was able to find one new source, and I
    knew about the Head First Design Patterns. Please,
    is there another comprehensive catalog that has Java
    code examples of patterns like: composite/iterator,
    observer, decorator, template etc..?Yes, Java itself has lots of these built into the language: java.util.Observer, java.util.Iterator.
    java.io.InputStream is a Decorator.
    The java.sql package is all Template or Strategy stuff, right?
    >
    I am very new to this and appreciate your help sincerely.If you really understand the patterns you should start looking for them in your own code.
    %

  • PhD Laser Physicist with 15+ years LabVIEW experience - New England Area

    I have a PhD in Laser Physics and 15+ years experience writing successful LabVIEW software at the heart of R+D, test and manufacturing automation projects.
    My previous LabVIEW projects have included;
    Non-linear simulation tools
    User configurable automated test and measurement suites interfacing to 10's of commercial instruments, DAQ interfaces, vision systems and custom microprocessor boards.
    Custom  scripting language implementations on top of LabVIEW test suites.
    Multi-threaded data analysis code with virtual addressing to work with data sets larger than available RAM.
    Cameralink and GigE vision system interfacing and image processing analysis and  test suites
    Writing driver libraries for new instruments.
    Hardware Interfacing with DAQmx, IMAQ, GPIB, Serial, USB, GigE vision, Camera Link etc.
    Distributed network variable deployment for multi program and multi PC/ networked server/client interfacing solutions.
    Interfacing with test equipment such as oscilloscopes, spectrum analyzers, DMM, power supplies, cameras etc. etc.
    Excel report generation, data file export.
    I also have experience with other languages:
    C++ code for my own custom microprocessor solutions (MSP430 family) and development of existing C/C++ code for other target devices.
    Visual Basic
    AutoIT (for automation of legacy MS Windows software without documented APIs)
    Excel VBA
    I can also design and implement basic electronics (interfacing to microprocessors and DAQ boards)
    My specialty is designing complete turn-key test solutions including;  software, firmware, test equipment procurement, custom PC hardware assembly, electronics, microprocessors, test fixturing, documentation, report generation.
    My Linked in profile is at: http://www.linkedin.com/profile/view?id=2380460
    I live in Massachusetts and would consider opportunities in the New-England area.
    References and a copy of my Resume available on request (please PM me).
    Kind regards,
    Dr. Peter Reeves-Hall

    Hi Peter,
    I just saw your resume on NI site...are you still looking for employment in NE ?  We are manufacturer of PVD systems located in Scituate MA  looking for a Labview Engineer.
    If you are interested, please send me an e-mail to [email protected]
    Regards,
    Linda Tardie
    Exec. VP
    AJA International, Inc

  • Flash builder vs. Flash Pro vs. Flash develop

    Hello!
    I've bought Ainol NOVO 7" Elf - Chinese high performans/low cost Android 4.0 tablet and everithing works fine, except for applications I've build using Adobe Air, which is pretty sad becouse it suppose to be for testing apps
    To be more specific:
    I am using:
    Flash Profesional CS 5.5 - the app changes the orientation of the screen and turns to black except for toolbar.
    One friend of mine is using :
    Flash Developer - the app does not change the orientation, everything turns to black except for 3 dark gray dots where the home button etc. were.
    And the other one is using:
    Flash Builder - the app is adjusting its orientation to the physical orientation of the device and everything seams to work just fine, even smoother then the iOS version.
    So, what's the main deferince between those three?
    Is there something I might change in settings before compiling?

    I don't know did this post had some imapact but new version of AIR for andorid fixed this problem. Thank you Adobe!

  • I have got a problem with flash development

    Hallo guys, I am new to flash development, that's why I ask you to help me.
    I have got the following problem:
    Actually, we want to create service for internal use in our companies in Russian cities. This service must solve following problem: when an employee leaves work, he must have a possibility to login to our web site, turn on his web camera through web interface on this site, so that he would be able to see the picture from his web camera in the player on the site. Than he leaves his workplace and goes home, when he gets home, he must be able to login on the same site, and see, what is happening on the camera. Ideally,  we must also provide such function: when nothing changes on the camera, our service realizes, that everything is ok, when someone walks in the camera or something changes on the picture this service must "realize" that somebody is walking in front of the camera and it should alert users via e-mail and send him some letter with a photo of object, which appeared in the camera.I found one site, which allows to do that dompodprismotrom.ru on this site, everything happens through the flash.
    I understand that this task should be divided into 4 parts:
    1.Getting image from video camera and broadcast it to the player on the site
    2. Send and store this video on the server
    3.Analyze video (if something changes an alert should be sent)
    4.Sending an alert letter with notification to the mail of the user.
    Maybe someone of you can tell whether there are any open source solutions for any of these 4 problems?And how can I realize all this functionality?Maybe there are such services in America or Europe?
    I will be very greatful for any information.

    Hi saigon88,
    If you are having issues with the display on your MacBook Pro, you may find the following article helpful:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Regards,
    - Brenden

  • Component Development Guru

    Any component development guru's interested in assisting with
    project? Please provide contact information. Thanks!

    What kind of assistance are you looking for?
    Carson
    Carson Hager
    Cynergy Systems, Inc.
    http://www.cynergysystems.com
    Macromedia Flex Alliance Solutions Partner
    Email: [email protected]
    Office: 866-CYNERGY
    Mobile: 1.703.489.6466
    "ToFlexOrNotToFlex" <[email protected]>
    wrote in message
    news:e52khl$sfc$[email protected]..
    > Any component development guru's that can assist with
    project? Please
    > provide contact information. Thanks!

  • Best forum to find a Flash developer?

    I will be posting a job opening for a full time Flash developer next week for the Fortune 200 company I work for. I would like to advertise this opening in the most effective forums to receive qualified applications. Any suggestions?

    There are certainly lots of good developers in this forum. The terms of use explicitly prohibit advertising goods or services, but I don't see anything about seeking services. Could be wrong about that and expect to draw fire almost immediately if so. I don't think a link to your website or other personal contact info belongs in a message but would be ok in your Public Profile.
    If it turns out your notice isn't welcome in this forum, I would suggest one of the many other OS/X developer forums on the web. Just take the time to read some of the threads to assess the level and quality of the advice that's given. Atm I don't know of any boards exclusively devoted to OS/X developer employment, but there must be some, so Google for those too.
    Btw, your previous threads got my attention, since Universal Access technology is one of my interest areas (not too long ago I was tasked with making a suite of Windows business apps compatible with JAWS, and learned about some of amazing software available at that time). However the interface you described was beyond anything I'm competent to do on the Mac, so all I could do was hope for your success. I'm especially interested in the research going on into ways to operate a computer directly from brain activity sensors and I'm sure that's going to be the future of the kind of work you want to do.
    I wish you every possible success!!

  • I am trying to install flash player on my new Macpro hardrive.  It is downloaded but I get the continual message that my I.D. and password are wrong. Help please!

    I am trying to install my downloaded flash player on my new MacPro hard drive.  I get the continual message that my I.D. and password are wrong.  I know they are not wrong and have tried a lot of combinations from old Macs and old passwords too.  Nothing works.  How can I get the job done?

    Hi,
    On Mac, this password prompt is presented by your operating system, and is intended to keep you from accidentally installing software which can harm your system. Flash Player does not throw this prompt, Apple does that.
    Please provide machine credentials of currently logged in User to continue with the installation.
    Hope this helps.
    Thanks
    Piyush

  • DW CS4: How to play a Flash Movie in a NEW window after clicking a link or a button on a page?

    Hi, using Adobe Dreamweaver CS4, I would like to have a link or a button on a webpage that when clicked will play a Flash Movie in a new window.
    Using the 'Insert Panel' > Media: FLV I managed to insert the .flv file on the page, but the movie plays 'in line' instead of in a new window. So far I can't find any 'Properties' or settings to change this behaviour. E.g. like Target _blank for opening e.g. a .pdf in a new Window.
    > Please help.
    Thank you!

    Try using one of the popular javascript methods for this. I use shadowbox and you can find examples, info and a download here: http://www.shadowbox-js.com

  • How do I get my library off of my flash drive onto my new computer?

    I just got a new computer today, so this morning I made sure to put everything that has to do with itunes on my flash drive so I could transfer my library onto the new computer. I have tried following many steps on how to move a library from an old computer to a new one, but so far I have only recovered purchased songs. I have plugged in my flash drive into the new PC and I can see the itunes library file, but when I click it, nothing happens. I hhave installed itunes on the new PC and like I said only some of my songs are in it. When I plug my ipod nano into my new PC, I get a message asking if i want to scan and fix my ipod. I have hit "continue scanning", but if I do hit scan and fix, will that erase all the songs on my ipod? I really can't have that happen, so I'm trying to be very cautious on what I do. Also, I have my ipod plugged in and in itunes I hit the arrow next to my ipod and it shows the drop down menu including my music. All of the songs that are in my old library and currently on my ipod are there, but they're all grayed out. I've tried copying the music folder to my ipod and it says I don't have enough space, but like I said, I am not going to erase all of the songs on my ipod. If someone could please help me out I'd really appreciate it! By the way I have Windows 7.

    This is how you should have done it. I don't know if you still have the files to do it this way:
    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.

  • How do I download adobe flash player on my new imac

    how do I download adobe flash player on my new imac

    This is asking you to store persistent Flash Cookies (meaning, they are not deleted when you delete your ordinary cookies.) Some sites will not work unless you allow them. Here's how to prevent them from getting on your computer in the first place, while keeping Flash and these sites working.
    If you use Firefox, get the Add-on Better Privacy, which will delete them when you quit Firefox.
    Or, trick these sites into thinking they are actually storing this crap: (These directions are for Flash Player 10 and above.)
    Using the following, no LSOs (Flash Cookies) will be stored and yet Flash is tricked into thinking they are. As far as I can tell all sites employing Flash will function properly; nothing will be broken, including Comedy Central with its streaming video content. (In the directions above, I had mistakenly recommended setting the Storage panel in the local Flash Pref Pane to not allow. It must be left as "Allow sites to store...." This was why the Comedy Central clip I had been trying to play wasn't working.)
    First, to get a new, clean folder, start by trashing the Macromedia folder in ~/Library/Preferences. That's in your user Library. Next, do not visit the local Flash Pref Pane in Sys Prefs. Instead, go directly to Adobe Global Privacy settings in the Adobe Settings Manager and set Camera and Mic to "Always deny." Visiting the Settings Manager will automatically create a new, clean Macromedia folder.
    (If you first visit the local Flash Pref Pane, the new Macromedia folder will lack the empty default #shared objects folder and its also empty enclosed folder (this is the one with a combination of characters and numerals.) I haven't tested to see what will happen if those two folders are not present. I assume, providing the Macromedia folder is unlocked, they would be created as soon as one visits a Flash site, but they will not be empty and this would defeat the entire purpose.)
    If you visit the local Flash Pref Pane now, all the defaults will remain, except for the Camera and Mic panel, where "Always deny" will be checked. Next, it seems prudent to go to the Playback panel and check "Block all sites from using peer assisted networking." But, important, in the Storage panel, you must leave the default "Allow sites to save...." checked. This is how sites using Flash are tricked into thinking storage of Flash Cookies is being allowed when they are, in fact, not.
    Next, go back to the Macromedia Folder and, using GetInfo/CMD-I, recursively lock all its enclosed folders. This means starting from the back working ones way up to the front. And, finally, lock the enclosing Macromedia folder itself. Nothing gets stored and everything keeps on working.
    (Thanks to Anon at XYMer's for this.)
    EDIT: Maybe something I don't know, but I don't think AdBlock in Safari will defeat Flash Cookies. There may be some Safari extension that will.
    Maybe this extension
    http://sweetpproductions.com/safaricookies/index.htm
    EDIT: in order to see and access your Users Library in Lion:
    http://www.macstories.net/tutorials/miscellaneous-lion-tips-and-tricks/
    Message was edited by: WZZZ

  • Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?

    The documentation for Flash Builder 4 beta says that after opening flash from flash builder, I should click a "done" button in flash and flash should close and what I created in flash should be included as a component or container in Flash Builder.  Using the Flash Builder 4 beta on Windows, when I click on the "create in flash" button on the properties panel for either the new flash component or container, Flash CS4 opens, I create something in Flash and no "done" button is present.  Nor is anything present in the menus resembling a "done" option.  Where is it?

    Hi Jeffrey:
    Still no done button.  Now under commands in Flash I can convert symbols to flex components and containers and these show up in the Flash library.
    Thanks:
    Jim
    Date: Wed, 30 Sep 2009 09:58:10 -0600
    From: [email protected]
    To: [email protected]
    Subject: Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
    Hi,
    You may need to install FlexComponentKit.mxp to your Flash CS4 beforehand.
    Jeffrey
    Date: Tue, 29 Sep 2009 17:04:36 -0600
    From: mailto:[email protected]
    To: mailto:[email protected]
    Subject: Flex Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
    I apparently didn't get one.  I've looked under various workspace configurations.  Another thing that seems odd is that when Flash opens I get the opening panel that allows me to select the type of file and version of AS I want to use.  I select new file with AS3.  Any ideas on why the "done" button wouldn't be present and if the opening panel is what I should expect on opening Flash after clicking the "create in Flash" button?
    >
    >

  • From flash develop into flash builder?

    Recently, I'm trying to use flashbuilder as the editor to associate with augmented reality. I'm useing in2ar sdk to compile the ar function. In the official in2ar tutorial they used flash develop as a example. However, when I import the sdk to the flash builder and try to run the example, it just samplely not working. In the console window, it just show [SWF] with the path of Main.swf - 1.285 bytes after decompression. Anyone know what wrong with this? The sdk and example works perfect in flash develop.

    Go to the Insert menu in DW and select swf. Find the .swf that you want to use and select it. Save the file and then use the Preview in Browser tool. Alternately, you can use the Publish function in the File menu in Flash to publish an html docuement that you can then open in DW.

  • Each time I create a new album in IPhoto, photos from another album or from photo stream are automatically dumped into the new album..  how do I create a blank album and then import photos from a flash drive into the new album?

    each time I create a new album in IPhoto, photos from another album or from photo stream are automatically dumped into the new album..  how do I create a blank album and then import photos from a flash drive into the new album?

    just import the iPhoto
    Surely you meant "just import the photo"?  The Spell checker is dangerously creative !

Maybe you are looking for