Segment E1EDP20 is missing in IDOC ORDERS05

Hi All,
   EDI Message Type:     ORDRSP
   Basic IDOC type:         ORDERS05
   Function Module:     IDOC_OUTPUT_ORDERS
   IDOC extraction function module: IDOC_OUTPUT_ORDRSP
   While saving the sales order in back end the basic IDOC ORDERS05 is triggering . Segment E1EDP20 is missing.
Please any one explain the above two function module. when it will trigger.
Thanks in advance.
SN

Hi,
Condition records needs to be maintained for the line items in the sales order. Only then E1EDP05 will be populated.
Kindly check for the condition records.
Regards,
Prasana.

Similar Messages

Segments E1EDK04 and E1EDK05 in IDOC ORDERS05 for PO's

Hi all,
I am using program RSNASTED and form ALE_PROCESSING to generate IDOC ORDERS05 for purchase orders. This works fine but, eventhough the purchase orders contain tax conditions (NAVS) and several header discounts (e.g. RA01), the relevant segments, E1EDK04 and E1EDK05, are not included in my IDOC.
Anyone have an idea how to include these segments?
Thanks and regards, Patrick

Michal_Krawczyk_PIXI wrote:
Hi,
>
> if your SAP version is <4.6A then you need to do it manually
> if not then it should work automatically
>
> Regards,
> Michal Krawczyk
Michal, Sorry it is not working as expected.

Segment E1EEDPO4 is missing in outbod message type ORDERS05

Hi Gurus,
When I create an Output type for PO using Message type ORDERS05, the segments E1EDP04 is missing in data records. Eventually this segment should carry the tax information. The tax information is very much appeared in Po and it is missing in IDOC. what should I do to make this segment appear in outbound IDOC data records.
Please mention the T codes and steps.
Thanks and regards
Rohini kumar

Hi,
You can use user exits EXIT_SAPLEINM_002 to populate segment E1EDP04 for outbound IDoc ORDERS05.
This segment is not populated in standard FM IDOC_OUTPUT_ORDERS.
Regards,
Ferry Lianto

Problem in message mapping (outbound IDOC ORDERS05 from SAP R/3)

Hi to all,
I have an outbound interface from sap r3
sap r3 --> XI --> ftp server
idoc --> XI --> text file
Using IDOC orders05
The problem is in segment E1EDP01/E1EDP19
Segment E1EDP01 is unbounded and i map it well. If it contains E1EDP19, works fine. But in some cases, E1EDP19 not appears at E1EDP01segments. So then XI fails at mapping:
IDOC OUTPUT (OK)
1-E1EDP01/E1EDP19
2-E1EDP01
3-E1EDP01/E1EDP19
4-E1EDP01
XI WRITES (FAILURE)
1-E1EDP01/E1EDP19
2-E1EDP01/E1EDP19 (INFORMATION FROM LINE 3)
3-E1EDP01 (WRONG)
4-E1EDP01 (WRONG)
You can take a look of Mapping mode here:
<a href="http://img505.imageshack.us/my.php?image=orders05mappingcj8.jpg">[IMG]http://img505.imageshack.us/img505/1536/orders05mappingcj8.th.jpg[/IMG]</a>
We don't use BPM and wanna use a solution without it.
Pls ask me for more information if necessary.
Thanks a lot for your help; Regards

Hi all,
The mapping function includes an exists and a mapwithdefault.
Now the creation of the segment is handled ok, but not as well its fields. Its unable to determine the write of the second E1EDP19 segment and it does:
1- OK
2- OK
3- Writes E1EDP20 but not the 19
4- OK
Thanks for your interesting

IDOC-Orders05 extension for Inbound process

Hi experts,
Here am struggling with one IDOC requirement,the requirement is Updating the data for the three fields in VBKD through inbound idoc.
since those fields are standard fields that is missing in the segment of standard IDOC-Orders05,so here am doing the extension of orders05 the basic steps like segment creation,assigning message type,assigning functional module has been done,now am copied the standard function module IDOC_INPUT_ORDERS to Z and now i have to find out the exact point where i have to insert my logic to update those fields.
No where am finding the option to modify the VBKD table,Can you please help me on this.

Hi Dinesh,
Please try to use BAPI 'BAPI_CUSTOMERCONTRACT_CHANGE' to update your required data in VBKD table , Please use this BAPI in inside your IDOC FM.
Below Sample code are there , Please try to use.
d_VBELN = '50000172'.
contract_header_inx-updateflag = 'U'.
CLEAR contract_items_in.
contract_items_in-itm_number = '100'.
contract_items_in-material = 'H51-YY019'.
contract_items_in-target_qty = '2'.
APPEND contract_items_in.
contract_items_inx-updateflag = 'U'.
contract_items_inx-itm_number = '100'.
contract_items_inx-material = 'X'.
contract_items_inx-target_qty = 'X'.
APPEND contract_items_inx.
CALL FUNCTION 'BAPI_CUSTOMERCONTRACT_CHANGE'
EXPORTING
SALESDOCUMENT = D_VBELN
contract_header_in = contract_header_in
contract_header_inx = contract_header_inx
TABLES
return = return
contract_item_in = contract_items_in
contract_item_inx = contract_items_inx.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Regards,
Prasenjit

Inbound Sales Order IDoc ORDERS05

Hi there,
I'm using the Idoc ORDERS05 Process Code ORDE to create Sales Order, all the process it's working perfectly. I would like to know if I can fill the header text of the order using the Idoc. The FM that I'm using is IDOC_INPUT_ORDERS
I have included in the idoc the following segments:
E1EDKT1                     003 EN   0001      0001
    E1EDKT2                     XXXXXXXXXXXXXXXXX
but the header text in the order created is empty.
Any idea about this, thanks in advance.
Alexis Ramirez

Hello Alexis
Below you see part of the XSLT mapping (on SAP-XI) for EDI purchase orders which are mapped to ORDERS.ORDERS05 IDocs (-> sales order).
I assume that in your case the name of TDOBJNAME (here = 'String') is missing.
                         <E1EDKT1 SEGMENT="1">
                              <TDID>Z091</TDID>
                              <TSSPRAS>D</TSSPRAS>
                              <TSSPRAS_ISO>DE</TSSPRAS_ISO>
                              <TDOBJECT>VBBK</TDOBJECT>
                              <TDOBNAME>String</TDOBNAME>
                              <E1EDKT2 SEGMENT="1">
                                   <TDLINE>
                                        <xsl:if test="../S_UNB/C_S002/D_0004='12345'">
                                             <xsl:value-of select="S_BGM/D_1004"/>
                                             <xsl:text>/RY</xsl:text>
                                        </xsl:if>
                                        <xsl:value-of select="S_FTX/C_C108/D_4440"/>
                                   </TDLINE>
                                   <TDFORMAT/>
                              </E1EDKT2>
                         </E1EDKT1>
Regards
Uwe

MATKL missing in IDoc but value exist in PO

Hi Experts,
PO caught Runtime Exception in Message-Mapping transformation as it
cannot produce target element because of the missing field IDoc material class (MATKL) in the segment E1EDP01.
and when I checked the PO in R/3, it got the field with value (but not going to IDoc) and on clicking the Messages it shows Outtype ZALE ( PO for ALE) with status No communication data has been defined for transmission medium A.
Is this the cause of error?
Please suggest on how to rectify this issue.
Thanks in advance,
MK

Please suggest on why the field is missing in the IDoc, when it exists in the PO.

Problems with idoc ORDERS05

Hi experts,
I created a new Z segment for idoc ORDERS05 and it works fine. This idoc is generated whenever a PO is created or modified. But if the PO has locked or deleted items, there is no segment for this items in the IDOC. Should I modify any code or something in SPRO??
Thanks in advance,
Maria

Hi again...
I'm trying to make a copy of the standr FM IDOC_OUTPUT_ORDERS because I think it may be easier to add the segments I need. I have also created in tx. WE41a new operation code ZME10 with my new fm. An in tx. WE20 I have assigned ZME10.
The problem is when I run ME9F i get this error:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_FUNC',
was neither
caught nor passed along using a RAISING clause, in the procedure
"NEW_DYN_PERFORM" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The program "RSNASTED" contains the CALL FUNCTION statement.
The name of the function module to be called is "ZIDOC_OUTPUT_ORDERS".
but "ZIDOC_OUTPUT_ORDERS" cannot be found in its function group.
Any idea ??
thanks in advance !

Idoc error mapping error for segment "E1EDT13 006" in DESADV idoc

Hi SAP Gurus,
DESADV IDOC for few articles is not getting passed from SAP to legacy system. It is missing one segment"E1EDT13 006" for goods issue.
Why is this mapping error happening. How can this be resolved.
Regards.
Sumi

Hi Nsangle/SAP gurus,
Thanks for that. But, I have already compared the failing idoc with the successful one. It's the segment E1EDT13 006 missing in the wrong idoc. I have already added that idoc and reprocessed it.
But, I wanted to know why such kind of idoc segment missing/ mapping error happens.
Regards.
Sumi

Inbound IDoc ORDERS05

HI,
I have to design an Inbound IDoc for create an Sales Order from a plain file
The Idoc I use is ORDERS05
Can anybody help me with some easy example???
I have some problem when I tried to match the fields in the segments of the Idoc and the fields in the transaction VA01....

Hi,
Please check this links for inbound IDOC ORDERS05 data mapping.
http://www.erpgenie.com/sapgenie/docs/sapedi/ordersin.xls
http://www.erpgenie.com/sapgenie/docs/sapedi/ordedi.xls
http://www.erpgenie.com/sapgenie/docs/sapedi/ordi1.doc
If the above links do not work for you, then please try to use WE19 (IDoc testing tool) for data mapping and simulate the inbound sales order. You can also use this tool for testing purposes as well.
Once done, then you can try to process your inbound IDoc file using standard program RSEINB00 to read the file and generate IDoc(s). Please ensure all your ALE and IDoc configuration are done such as distrribution model (BD64), partner profile (WE20), IDoc Port Processing (WE21) and so on.
Hope this will help to start with.
Regards,
Ferry Lianto

Segment E1EDPO4 is missing in outbod message type ORDERS01

Hi
I have a problem. Though tax code is existing in PO, in the outbond IDOC type ORDERS01 the segment EIEDP04 is missing. Some cases , this segment is appearing. I really dont know the reason why it is behaving so eratic.
and Plant is defined in the item level for a meterial, it is now showing blank in in the segment EIEDPO1.
dont know the reason why it is behaving so earatically. Please let me know the reason.
It is very very urgent.
regards
rohini kumar

Hey Biju,
The fields are attached to the segments and the data is availble in PO and the Problem is why they are not picking up in original IDOC( while creating an IDOC).
eg: Tax code: V0 has been mentioned in Invoice segment in PO line item. but that is not showing in IDOC output. infact that segment EIEDP04( for taxes) it self is missing in output.
dont know the reason why it is not pickingup.
regards
rohinik umar

Idoc ORDERS05 for PO Outbound for the Output type ZSUS.

I have a standard Idoc ORDERS05 for the PO.
I have Extended this Idoc and Created a Z- Segment below E1EDKA1 which is ZE1EDKA1.
There are Four Fields in it. i.e. ZZFNAME, ZZLMAE, ZZEMAIL & ZZADDRESS.
When I create the PO using ME21N OR Change using ME22N and use the MEssage type ZSUS which is Configured in the NACE T-Code.
The Idoc Just does not get triggered . I tried to do the same through the test tool. WE19 but yet the Idocs gets Created but the Z-segment does not get populted nor is seen.
I have writtem my code in the Exit 'EXIT_SAPLEINM_002' and have poulated the above mentioned four fields.
But the Idocs just does not reach the user Exit and hence these four fields do not get populated.
I have done the neccessary configuration in WE82 and also in WE57.
Can u please provide me with the Solution.
Regards,
Deepak.

Hi,
Use table NAST

Inbound IDoc ORDERS05 : PO Rejection Indicator Issue

Hello,
We are receiving idoc ORDERS05 with message type ORDRSP from vendor(PO Confirmation) with 003 as ACTION in field E1EDP01-Action.
but still rejection indicator for PO item is not getting Set.Hence we see PO item is not marked deleted.
Could you please suggest what we are missing ?

Hi,
check the step by step config setting for purchase order..
The transaction codes that are required for this method are
We81
We30
We31
We82
We21
We20
Bd64
Nace
Me22n (purchase order), va02 (sales order) etc.
Ex: purchase order.
Message type: ORDERS
Idoc type: ORDERS05
Outbound process code for purchase order: me10
The steps that are to be followed are:
Check for the message type in the transaction in we81.
check for the idoc type in the transaction we30.
check we82 in which the link between message type and idoc type is there.
create the port in we21.
Configure the partner profiles in we20.
Click on the + button outbound parameters and give the message type, receiver port,Idoc type.
Now press on the message control tab, this is the place where u give the outbound process code. The message type in the message control is the output type that is used in the nace transaction.
Create a distribution model in bd64.
Go to purchase order transaction (me22n).and press the messages tab
In the messages tab give the output type and the distribution medium as distribution-ale and then save it.
Reward if helpful.
Regards,
Nagaraj

IDoc - ORDERS05 - Inbound - IHREZ_E

What segment/field/qualif should I be using to populate the field VBKD-IHREZ_E at the header level?
When creating a new sales order, I am able to populate VBKD-IHREZ_E at the item level by using E2EDP02/BELNR and qualifyier 044.
However, i would like to populate the field at the header level but haven't been able to find the right segment/field
Thank you for your help

I'm not suer about you scenario, but we create sales orders with IDoc ORDERS05 (since SAP R3 46C).
We create segment E1EDK02 with QUALF "069" and BELNR "XY". After IDoc processing we have the value "XY" in VBKD-IHREZ_E.

Idoc-extend custom idoc orders05

I have to extend standard custom idoc orders05 with one zsegment having 6 fields,so i have to write the code for extending it in the userexit,so only forzsegemnts?is it like that.What is the approach of writing it.

" 1.You must first have to create a custom segemnt with all the necessary fields in WE31.
" 2.Then goto transaction WE30 and extend the basic idoc type ORDERS05 to the required idoc typea "and add the custome segemnt at the correct hierarchy level.
" 3.Now you need to go the enhancement and populate the fields of the custom segment work area first "and then pass the work area data with segemnt name to a
SE37-->IDOC_OUTPUT_ORDERS-->DOuble click(PERFORM FUELLEN_IDOC_INTTAB)-->
double click on the ( PERFORM customer_function) after you segment which you want to fill
-->Nex write below code..
Loop at int_edidd.
CASE int_edidd-segnam.
WHEN 'E1EDK01'.                       "Read your Segment..if you are using read extension segment.
                                                    "remember always ZSEGMENT is atchild level
                                                    "so read parent segment and add you code at child segment
IF control_record_out-cimtyp EQ 'ZORDCMPT'.       "check your idoc extension then appen data to segmeny
"add your code and append to zsegment with index captured from parent segment
ENDIF
ENDLOOP.
next activate the segment in SMOD..
Regards,
Prabhudas
Edited by: Prabhu Das on Apr 20, 2009 7:19 PM
Edited by: Prabhu Das on Apr 20, 2009 7:21 PM

Segment E1EDP20 is missing in IDOC ORDERS05

Similar Messages

Maybe you are looking for