Segmentation Fault while installing on Solaris 9

Hi,
I was able to install Sun One Studio on Solaris 8 as root and was able to run it.
However I am trying to re-install it on Solaris 9 as a user with super user previlages.
I keep getting segmentation Fault when i run s1s5se-sol-sparc-en.bin
Any pointers?
thanks
Sri

Hi,
From the develpers.sun.com KB:
Installation
S1S5 : Segmentation Fault when running Solaris S1S5 Installer
Whenever i try to run the installer on a Solaris 9 machine as root I get Segmentation fault as follows-
root[(k)sh]@score1# ./s1s5se-sol-sparc-en.bin Segmentation Fault root[(k)sh]@score1#
Reason for Problem :-
The cause of this Segementation Fault problem is due to a directory read permissions problem. The installer could not be invoked because the user did not have read permission to a directory above the one containing the installer.

Similar Messages

  • Segmentation fault while install Grid 11.2.0.3

    Hi guys.
       I try to install  a stand alone oracle Database 11.2.0.3 with ASM over a RedHat 6.4 x86_64 Vmware server.
    Hardware
    4 cores
    32 GB RAM
    Vmware server 5.1.0
    Operating System
    RedHat 6.4 x86_64, 2.6.32-358.6.2.el6.x86_64 (update today with yum update).
    All needs packages installeds (i think so).
    Vmware tools installed and updated.
    Software
    p10404530_112030 software packages.
    Disk are mapping with udev/multipath, not ASM.
    Installing steps.
    1.- Execute enviroment shell.
    ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
    ORACLE_SID=+ASM; export ORACLE_SID
    ORACLE_HOME=/u01/app/11.2.0.3/grid; export ORACLE_HOME
    PATH=$PATH:$ORACLE_HOME/bin:$BASE_PATH; export PATH
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
    CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
    2.- Execute Grid runInstall
    3.- Chose Configurarion Grid for Standalone server.
    4.- ASM disk are founded, listed and selected.
    5.- Requirement validator only warning pdksh package, but Redhat 6 has ksh package (and it's installed). So, i ignored that warning and continue.
    6.- Install process start fine.
    7.- Install process want executed root scripts
    [root@oraclepruebas ~]# /u01/app/oraInventory/orainstRoot.sh
    Changing permissions of /u01/app/oraInventory.
    Adding read,write permissions for group.
    Removing read,write,execute permissions for world.
    Changing groupname of /u01/app/oraInventory to oinstall.
    The execution of the script is complete.
    [root@oraclepruebas ~]# /u01/app/11.2.0.3/grid/root.sh
    Performing root user operation for Oracle 11g
    The following environment variables are set as:
        ORACLE_OWNER= oracle
        ORACLE_HOME=  /u01/app/11.2.0.3/grid
    Enter the full pathname of the local bin directory: [/usr/local/bin]:
       Copying dbhome to /usr/local/bin ...
       Copying oraenv to /usr/local/bin ...
       Copying coraenv to /usr/local/bin ...
    Creating /etc/oratab file...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root script.
    Now product-specific root actions will be performed.
    Using configuration parameter file: /u01/app/11.2.0.3/grid/crs/install/crsconfig_params
    Creating trace directory
    LOCAL ADD MODE
    Creating OCR keys for user 'oracle', privgrp 'oinstall'..
    Operation successful.
    LOCAL ONLY MODE
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    Failure with signal 11 from command: /u01/app/11.2.0.3/grid/bin/crsctl pin css -n oraclepruebas
    Pin node (/u01/app/11.2.0.3/grid/bin/crsctl pin css -n oraclepruebas) ... failed
    So, if i execute crsctl command, i have a nice Segmentation fault error, but if i try to execute another grid command, everyting is fine.
    [root@oraclepruebas oracle]#  /u01/app/11.2.0.3/grid/bin/crsctl
    Segmentation fault
    [root@oraclepruebas oracle]#
    [root@oraclepruebas oracle]#  /u01/app/11.2.0.3/grid/bin/ocrcheck
    Status of Oracle Cluster Registry is as follows :
             Version                  :          3
             Total space (kbytes)     :     262120
             Used space (kbytes)      :         92
             Available space (kbytes) :     262028
             ID                       :  756593197
             Device/File Name         : /u01/app/11.2.0.3/grid/cdata/localhost/local.ocr
                                        Device/File integrity check succeeded
                                        Device/File not configured
                                        Device/File not configured
                                        Device/File not configured
                                        Device/File not configured
             Cluster registry integrity check succeeded
             Logical corruption check succeeded
    This is weird, because i has installed a RAC 11.2.0.3 databases and standalone databases (all with grid) over Vmware and RedHat 6.4 and works fine. I have even compared the rpm packages between a functionally installation with this server and matched all !!!.
    I think that i am making a mistake, but i can't see it. I wan't reinstall or clone a funcionally virtual machine, because i want to learn with my mistake.
    I has googled too much and i searched into metalink but i can't find something similar.
    I apreciate your help, suggestions, anything.

    I had similar issue while installing 32bit version by mistake. Just to checkyou have x86-64 in the filenames of oracle software distribution
    p10404530_112030_Linux-x86-64_1of7.zip
    p10404530_112030_Linux-x86-64_2of7.zip
    p10404530_112030_Linux-x86-64_3of7.zip
    Regards
    Ed
    http://erudans.blogspot.com

  • RunInstaller line 132: Segmentation fault $CMDIR/install/.oui formCluster

    Hi There,
    I'm trying to install Grid infrastructure on a VM and I'm encountering the error below.
    ./runInstaller line 132: 3564 Segmentation fault $CMDIR/install/.oui $* -formCluster
    Machine's details:
    Vmware Infrastructure
    Oracle Linux server release 6.2 - 32 bit
    Grid Infrastructure 11.2 for 32-bit
    and "free -m" shows "3523"(free) as swap.
    I did go through the Document ID 1328616.1 and it did not help. Some posts suggested that it could be an issue with the swap space, I also tried adding more swap space and it did not help either. Please advise.
    Thanks
    Edited by: user12142200 on Aug 13, 2012 2:12 AM

    Pl post exact version of "11g", along with the last 100 lines from the install log
    Pl see if these MOS Docs can help
    runInstaller: line 63: Segmentation fault $CMDDIR/install/.oui -oneclick          [Document 435687.1]
    Getting Segmentation Fault When Running Runinstaller          [Document 1328616.1]
    HTH
    Srini

  • Error while installing on Solaris 10

    Hi
    i am getting following error while installing weblogic server10.3.1 on Solaris 10.
    +Installation fails with Fatal error encoutered during self-extraction. Click Yes to exit, No to continue as a Net installation.[No space left on device] message.+
    I tried redirecting it to new local temp folder but it didn't helped.
    Please help.
    Thanks
    Chinmay
    Edited by: user12143775 on Nov 13, 2009 8:53 AM

    Hi Vijay
    I can see a constarint on / and /dev directory.Rest Of directory has a lot of available space.Can this cause the problem.
    Filesystem size used avail capacity Mounted on
    / 2.0G 1.6G 371M 82% /
    /dev 2.0G 1.6G 371M 82% /dev
    /lib 59G 8.3G 50G 15% /lib
    /platform 59G 8.3G 50G 15% /platform
    /sbin 59G 8.3G 50G 15% /sbin
    /usr 59G 8.3G 50G 15% /usr
    /usr/local 30G 2.3G 26G 8% /usr/local
    /usr/openv 6.0G 3.1G 2.8G 53% /usr/openv
    proc 0K 0K 0K 0% /proc
    ctfs 0K 0K 0K 0% /system/contract
    mnttab 0K 0K 0K 0% /etc/mnttab
    objfs 0K 0K 0K 0% /system/object
    swap 102G 392K 102G 1% /etc/svc/volatile
    /platform/SUNW,T5240/lib/libc_psr/libc_psr_hwcap2.so.1
    59G 8.3G 50G 15% /platform/sun4v/lib/libc_psr.so.1
    /platform/SUNW,T5240/lib/sparcv9/libc_psr/libc_psr_hwcap2.so.1
    59G 8.3G 50G 15% /platform/sun4v/lib/sparcv9/libc_psr.so.1
    fd 0K 0K 0K 0% /dev/fd
    swap 102G 48K 102G 1% /tmp
    swap 102G 48K 102G 1% /var/run
    3.24.144.10:/vol/preprovis_88
    25G 972M 24G 4% /u01
    Thanks
    Chinmay

  • Segmentation fault while updateing [SOLVED]

    Hello all,
    I got this probem a few days ago, trying to run 'pacman -syu' ends in a segmentation fault.
    I have no clue what to do abou it..
    I first tryed to update zlib manual as it was last in the list, worked fine. So i tryed wine and trying to update wine end in a segmentation fault.
    I uninstalled wine and now i cant reinstall it.
    Output from --debug
    output 1: before i tryed anything
    output 2: after installing zlib and removing wine
    output 3: from when i try to install wine again.
    output 1:
    debug: config: attempting to read file /etc/pacman.conf
    debug: config: new section 'options'
    debug: config: HoldPkg: pacman
    debug: config: HoldPkg: glibc
    debug: config: SyncFirst: pacman
    debug: config: architecture: x86_64
    debug: config: new section 'core'
    debug: registering sync database 'core'
    debug: config file /etc/pacman.conf, line 64: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server URL to database 'core': [url]ftp://mirrors.kernel.org/archlinux/core/os/x86_64[/url]
    debug: setlibpaths() called
    debug: option 'cachedir' = /var/cache/pacman/pkg/
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'extra'
    debug: registering sync database 'extra'
    debug: config file /etc/pacman.conf, line 67: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server URL to database 'extra': [url]ftp://mirrors.kernel.org/archlinux/extra/os/x86_64[/url]
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'community'
    debug: registering sync database 'community'
    debug: config file /etc/pacman.conf, line 73: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server URL to database 'community': [url]ftp://mirrors.kernel.org/archlinux/community/os/x86_64[/url]
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'multilib'
    debug: registering sync database 'multilib'
    debug: config file /etc/pacman.conf, line 79: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server URL to database 'multilib': [url]ftp://mirrors.kernel.org/archlinux/multilib/os/x86_64[/url]
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'archlinuxfr'
    debug: registering sync database 'archlinuxfr'
    debug: adding new server URL to database 'archlinuxfr': [url]http://repo.archlinux.fr/x86_64[/url]
    debug: config: finished parsing /etc/pacman.conf
    debug: registering local database
    :: Synchronizing package databases...
    debug: destfile found, using mtime only
    debug: using 'core.db.tar.gz' for download progress
    debug: HTTP_PROXY: (null)
    debug: http_proxy: (null)
    debug: FTP_PROXY: (null)
    debug: ftp_proxy: (null)
    debug: ust.mtime: 1292198641 local_time: 1292198641 compare: 0
    debug: ust.size: 36849 local_size: 36849 compare: 0
    debug: files are identical, skipping core.db.tar.gz
    core is up to date
    debug: destfile found, using mtime only
    debug: using 'extra.db.tar.gz' for download progress
    debug: HTTP_PROXY: (null)
    debug: http_proxy: (null)
    debug: FTP_PROXY: (null)
    debug: ftp_proxy: (null)
    debug: ust.mtime: 1292277403 local_time: 1292277403 compare: 0
    debug: ust.size: 462732 local_size: 462732 compare: 0
    debug: files are identical, skipping extra.db.tar.gz
    extra is up to date
    debug: destfile found, using mtime only
    debug: using 'community.db.tar.gz' for download progress
    debug: HTTP_PROXY: (null)
    debug: http_proxy: (null)
    debug: FTP_PROXY: (null)
    debug: ftp_proxy: (null)
    debug: ust.mtime: 1292269249 local_time: 1292269249 compare: 0
    debug: ust.size: 410459 local_size: 410459 compare: 0
    debug: files are identical, skipping community.db.tar.gz
    community is up to date
    debug: destfile found, using mtime only
    debug: using 'multilib.db.tar.gz' for download progress
    debug: HTTP_PROXY: (null)
    debug: http_proxy: (null)
    debug: FTP_PROXY: (null)
    debug: ftp_proxy: (null)
    debug: ust.mtime: 1292018227 local_time: 1292018227 compare: 0
    debug: ust.size: 23111 local_size: 23111 compare: 0
    debug: files are identical, skipping multilib.db.tar.gz
    multilib is up to date
    debug: destfile found, using mtime only
    debug: using 'archlinuxfr.db.tar.gz' for download progress
    debug: HTTP_PROXY: (null)
    debug: http_proxy: (null)
    debug: FTP_PROXY: (null)
    debug: ftp_proxy: (null)
    debug: ust.mtime: 1292246820 local_time: 1292246820 compare: 0
    debug: ust.size: 24155 local_size: 24155 compare: 0
    debug: files are identical, skipping archlinuxfr.db.tar.gz
    archlinuxfr is up to date
    debug: loading package cache for repository 'local'
    debug: database path for tree local set to /var/lib/pacman/local/
    debug: loading package cache for repository 'core'
    debug: database path for tree core set to /var/lib/pacman/sync/core/
    :: Starting full system upgrade...
    debug: checking for package upgrades
    debug: loading package cache for repository 'extra'
    debug: database path for tree extra set to /var/lib/pacman/sync/extra/
    debug: loading package cache for repository 'community'
    debug: database path for tree community set to /var/lib/pacman/sync/community/
    debug: loading package cache for repository 'multilib'
    debug: database path for tree multilib set to /var/lib/pacman/sync/multilib/
    debug: loading package cache for repository 'archlinuxfr'
    debug: database path for tree archlinuxfr set to /var/lib/pacman/sync/archlinuxfr/
    debug: new version of 'dhcpcd' found (5.2.8-1 => 5.2.9-1)
    debug: adding package dhcpcd-5.2.9-1 to the transaction targets
    debug: new version of 'diffutils' found (3.0-1 => 3.0-2)
    debug: adding package diffutils-3.0-2 to the transaction targets
    debug: new version of 'fluidsynth' found (1.1.3-1 => 1.1.3-2)
    debug: adding package fluidsynth-1.1.3-2 to the transaction targets
    debug: new version of 'heimdal' found (1.3.3-3 => 1.3.3-4)
    debug: adding package heimdal-1.3.3-4 to the transaction targets
    debug: new version of 'kernel26' found (2.6.36.1-3 => 2.6.36.2-1)
    debug: adding package kernel26-2.6.36.2-1 to the transaction targets
    debug: new version of 'kernel26-headers' found (2.6.36.1-3 => 2.6.36.2-1)
    debug: adding package kernel26-headers-2.6.36.2-1 to the transaction targets
    debug: new version of 'libdrm' found (2.4.22-1 => 2.4.22-3)
    debug: adding package libdrm-2.4.22-3 to the transaction targets
    debug: new version of 'man-pages' found (3.31-1 => 3.32-1)
    debug: adding package man-pages-3.32-1 to the transaction targets
    debug: new version of 'mesa' found (7.9-1 => 7.9.0.git20101207-2)
    debug: adding package mesa-7.9.0.git20101207-2 to the transaction targets
    debug: new version of 'raptor' found (1.4.21-1 => 1.4.21-2)
    debug: adding package raptor-1.4.21-2 to the transaction targets
    debug: new version of 'rasqal' found (0.9.20-1 => 0.9.21-1)
    debug: adding package rasqal-0.9.21-1 to the transaction targets
    debug: new version of 'redland' found (1.0.12-2 => 1.0.12-3)
    debug: adding package redland-1.0.12-3 to the transaction targets
    debug: new version of 'syslog-ng' found (3.1.2-1 => 3.2.1-1)
    debug: adding package syslog-ng-3.2.1-1 to the transaction targets
    debug: new version of 'telepathy-glib' found (0.12.5-1 => 0.12.6-1)
    debug: adding package telepathy-glib-0.12.6-1 to the transaction targets
    debug: new version of 'udev' found (164-2 => 164-3)
    debug: adding package udev-164-3 to the transaction targets
    debug: new version of 'usbutils' found (0.91-3 => 0.91-4)
    debug: adding package usbutils-0.91-4 to the transaction targets
    debug: new version of 'wine' found (1.3.8-1 => 1.3.9-1)
    debug: adding package wine-1.3.9-1 to the transaction targets
    debug: new version of 'zlib' found (1.2.5-2 => 1.2.5-3)
    debug: adding package zlib-1.2.5-3 to the transaction targets
    error: segmentation fault
    Internal pacman error: Segmentation fault.
    Please submit a full bug report with --debug if appropriate
    Output 2:
    debug: config: attempting to read file /etc/pacman.conf
    debug: config: new section 'options'
    debug: config: HoldPkg: pacman
    debug: config: HoldPkg: glibc
    debug: config: SyncFirst: pacman
    debug: config: architecture: x86_64
    debug: config: new section 'core'
    debug: registering sync database 'core'
    debug: config file /etc/pacman.conf, line 64: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server URL to database 'core': [url]ftp://mirrors.kernel.org/archlinux/core/os/x86_64[/url]
    debug: setlibpaths() called
    debug: option 'cachedir' = /var/cache/pacman/pkg/
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'extra'
    debug: registering sync database 'extra'
    debug: config file /etc/pacman.conf, line 67: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server URL to database 'extra': [url]ftp://mirrors.kernel.org/archlinux/extra/os/x86_64[/url]
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'community'
    debug: registering sync database 'community'
    debug: config file /etc/pacman.conf, line 73: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server URL to database 'community': [url]ftp://mirrors.kernel.org/archlinux/community/os/x86_64[/url]
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'multilib'
    debug: registering sync database 'multilib'
    debug: config file /etc/pacman.conf, line 79: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server URL to database 'multilib': [url]ftp://mirrors.kernel.org/archlinux/multilib/os/x86_64[/url]
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'archlinuxfr'
    debug: registering sync database 'archlinuxfr'
    debug: adding new server URL to database 'archlinuxfr': [url]http://repo.archlinux.fr/x86_64[/url]
    debug: config: finished parsing /etc/pacman.conf
    debug: registering local database
    :: Synchronizing package databases...
    debug: destfile found, using mtime only
    debug: using 'core.db.tar.gz' for download progress
    debug: HTTP_PROXY: (null)
    debug: http_proxy: (null)
    debug: FTP_PROXY: (null)
    debug: ftp_proxy: (null)
    debug: ust.mtime: 1292198641 local_time: 1292198641 compare: 0
    debug: ust.size: 36849 local_size: 36849 compare: 0
    debug: files are identical, skipping core.db.tar.gz
    core is up to date
    debug: destfile found, using mtime only
    debug: using 'extra.db.tar.gz' for download progress
    debug: HTTP_PROXY: (null)
    debug: http_proxy: (null)
    debug: FTP_PROXY: (null)
    debug: ftp_proxy: (null)
    debug: ust.mtime: 1292277403 local_time: 1292277403 compare: 0
    debug: ust.size: 462732 local_size: 462732 compare: 0
    debug: files are identical, skipping extra.db.tar.gz
    extra is up to date
    debug: destfile found, using mtime only
    debug: using 'community.db.tar.gz' for download progress
    debug: HTTP_PROXY: (null)
    debug: http_proxy: (null)
    debug: FTP_PROXY: (null)
    debug: ftp_proxy: (null)
    debug: ust.mtime: 1292269249 local_time: 1292269249 compare: 0
    debug: ust.size: 410459 local_size: 410459 compare: 0
    debug: files are identical, skipping community.db.tar.gz
    community is up to date
    debug: destfile found, using mtime only
    debug: using 'multilib.db.tar.gz' for download progress
    debug: HTTP_PROXY: (null)
    debug: http_proxy: (null)
    debug: FTP_PROXY: (null)
    debug: ftp_proxy: (null)
    debug: ust.mtime: 1292018227 local_time: 1292018227 compare: 0
    debug: ust.size: 23111 local_size: 23111 compare: 0
    debug: files are identical, skipping multilib.db.tar.gz
    multilib is up to date
    debug: destfile found, using mtime only
    debug: using 'archlinuxfr.db.tar.gz' for download progress
    debug: HTTP_PROXY: (null)
    debug: http_proxy: (null)
    debug: FTP_PROXY: (null)
    debug: ftp_proxy: (null)
    debug: ust.mtime: 1292246820 local_time: 1292246820 compare: 0
    debug: ust.size: 24155 local_size: 24155 compare: 0
    debug: files are identical, skipping archlinuxfr.db.tar.gz
    archlinuxfr is up to date
    debug: loading package cache for repository 'local'
    debug: database path for tree local set to /var/lib/pacman/local/
    debug: loading package cache for repository 'core'
    debug: database path for tree core set to /var/lib/pacman/sync/core/
    :: Starting full system upgrade...
    debug: checking for package upgrades
    debug: loading package cache for repository 'extra'
    debug: database path for tree extra set to /var/lib/pacman/sync/extra/
    debug: loading package cache for repository 'community'
    debug: database path for tree community set to /var/lib/pacman/sync/community/
    debug: loading package cache for repository 'multilib'
    debug: database path for tree multilib set to /var/lib/pacman/sync/multilib/
    debug: loading package cache for repository 'archlinuxfr'
    debug: database path for tree archlinuxfr set to /var/lib/pacman/sync/archlinuxfr/
    debug: new version of 'dhcpcd' found (5.2.8-1 => 5.2.9-1)
    debug: adding package dhcpcd-5.2.9-1 to the transaction targets
    debug: new version of 'diffutils' found (3.0-1 => 3.0-2)
    debug: adding package diffutils-3.0-2 to the transaction targets
    debug: new version of 'fluidsynth' found (1.1.3-1 => 1.1.3-2)
    debug: adding package fluidsynth-1.1.3-2 to the transaction targets
    debug: new version of 'heimdal' found (1.3.3-3 => 1.3.3-4)
    debug: adding package heimdal-1.3.3-4 to the transaction targets
    debug: new version of 'kernel26' found (2.6.36.1-3 => 2.6.36.2-1)
    debug: adding package kernel26-2.6.36.2-1 to the transaction targets
    debug: new version of 'kernel26-headers' found (2.6.36.1-3 => 2.6.36.2-1)
    debug: adding package kernel26-headers-2.6.36.2-1 to the transaction targets
    debug: new version of 'libdrm' found (2.4.22-1 => 2.4.22-3)
    debug: adding package libdrm-2.4.22-3 to the transaction targets
    debug: new version of 'man-pages' found (3.31-1 => 3.32-1)
    debug: adding package man-pages-3.32-1 to the transaction targets
    debug: new version of 'mesa' found (7.9-1 => 7.9.0.git20101207-2)
    debug: adding package mesa-7.9.0.git20101207-2 to the transaction targets
    debug: new version of 'raptor' found (1.4.21-1 => 1.4.21-2)
    debug: adding package raptor-1.4.21-2 to the transaction targets
    debug: new version of 'rasqal' found (0.9.20-1 => 0.9.21-1)
    debug: adding package rasqal-0.9.21-1 to the transaction targets
    debug: new version of 'redland' found (1.0.12-2 => 1.0.12-3)
    debug: adding package redland-1.0.12-3 to the transaction targets
    debug: new version of 'syslog-ng' found (3.1.2-1 => 3.2.1-1)
    debug: adding package syslog-ng-3.2.1-1 to the transaction targets
    debug: new version of 'telepathy-glib' found (0.12.5-1 => 0.12.6-1)
    debug: adding package telepathy-glib-0.12.6-1 to the transaction targets
    debug: new version of 'udev' found (164-2 => 164-3)
    debug: adding package udev-164-3 to the transaction targets
    debug: new version of 'usbutils' found (0.91-3 => 0.91-4)
    debug: adding package usbutils-0.91-4 to the transaction targets
    error: segmentation fault
    Internal pacman error: Segmentation fault.
    Please submit a full bug report with --debug if appropriate.
    Output 3:
    debug: config: attempting to read file /etc/pacman.conf
    debug: config: new section 'options'
    debug: config: HoldPkg: pacman
    debug: config: HoldPkg: glibc
    debug: config: SyncFirst: pacman
    debug: config: architecture: x86_64
    debug: config: new section 'core'
    debug: registering sync database 'core'
    debug: config file /etc/pacman.conf, line 64: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server URL to database 'core': [url]ftp://mirrors.kernel.org/archlinux/core/os/x86_64[/url]
    debug: setlibpaths() called
    debug: option 'cachedir' = /var/cache/pacman/pkg/
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'extra'
    debug: registering sync database 'extra'
    debug: config file /etc/pacman.conf, line 67: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server URL to database 'extra': [url]ftp://mirrors.kernel.org/archlinux/extra/os/x86_64[/url]
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'community'
    debug: registering sync database 'community'
    debug: config file /etc/pacman.conf, line 73: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server URL to database 'community': [url]ftp://mirrors.kernel.org/archlinux/community/os/x86_64[/url]
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'multilib'
    debug: registering sync database 'multilib'
    debug: config file /etc/pacman.conf, line 79: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: adding new server URL to database 'multilib': [url]ftp://mirrors.kernel.org/archlinux/multilib/os/x86_64[/url]
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: new section 'archlinuxfr'
    debug: registering sync database 'archlinuxfr'
    debug: adding new server URL to database 'archlinuxfr': [url]http://repo.archlinux.fr/x86_64[/url]
    debug: config: finished parsing /etc/pacman.conf
    debug: registering local database
    debug: loading package cache for repository 'local'
    debug: database path for tree local set to /var/lib/pacman/local/
    debug: loading package cache for repository 'core'
    debug: database path for tree core set to /var/lib/pacman/sync/core/
    debug: loading package cache for repository 'extra'
    debug: database path for tree extra set to /var/lib/pacman/sync/extra/
    debug: loading package cache for repository 'community'
    debug: database path for tree community set to /var/lib/pacman/sync/community/
    debug: loading package cache for repository 'multilib'
    debug: database path for tree multilib set to /var/lib/pacman/sync/multilib/
    debug: adding package wine-1.3.9-1 to the transaction targets
    error: segmentation fault
    Internal pacman error: Segmentation fault.
    Please submit a full bug report with --debug if appropriate.
    Cheers
    X
    Last edited by Xenonn (2010-12-13 23:02:27)

    skunktrader wrote:Perhaps the pacman cache is corrupted.  Try pacman -Syyu
    worked like a charm )
    Thank you very much

  • Brasero segmentation fault while selecting Plugins from menu

    Hello,
    Brasero is seg faulting for me when I select Plugins from the File menu. I am running a standard Gnome DE 3.12.2 with startx to login. When I launch brasero from terminal, it tells me:
    [bryan@nas ~]$ brasero
    (brasero:5300): GLib-GObject-CRITICAL **: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
    (brasero:5300): GLib-GObject-CRITICAL **: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
    and then once I click Plugins it says additionally:
    (brasero:5300): GLib-GObject-CRITICAL **: g_type_instance_get_private: assertion 'instance != NULL && instance->g_class != NULL' failed
    Segmentation fault
    Brasero version is 3.11.3
    Any ideas what causes this problem?
    Pacman -Syu is done before posting this message...
    Thanks

    Upstream bug report: https://bugzilla.gnome.org/show_bug.cgi?id=728376

  • "Segmentation fault" while running code, how can I increase the stack size?

    Hi, I only have very limited knowledge about c+ codes and compiling them and I would be very happy if someone can assist me.
    My problem: I have two c++ codes, one with an array size of ~100,000, the other with ~1,500,000. When I compile them using terminal g++ -o commands, the smaller one works with no problem (it takes less than a minute to run), the larger one gives "Segmentation fault". I think it is a memory allocation problem and I am not an expert on dynamic memory allocation which I want to avoid for now.
    My question: When I compile the large code in Windows Visual Basic, I can go to settings to increase the stack and heap sizes and it does work. Is there a similar thing in OS X Leopard? I found some commands to do that in the terminal window but I wasn't able to resolve my problem.
    Thanks for all your help.

    Thanks for the link, I actually looked for a developer discussion group but was not able to find it through the main discussion page. I reposted to my question there.

  • 10g Universal Installer kernel errors while installing on Solaris 5.10

    Hi all,
    I have been trying to install Oracle 10g on a Solaris 5.10 machine (32-bit) as per the official Oracle Documentation for a couple of days now. It seems that the Universal Installer fails it's pre-installation steps and throws up error at the following kernel parameters:
    Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
    Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
    Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
    Checking for semsys:seminfo_semmsl=256; found no entry. Failed <<<<
    Check complete. The overall result of this check is: Failed <<<<
    I have followed the Oracle Documentation which says to change the kernel parameters using the resource control facility. For this I already have a project "oracle" which the user "oracle" has been assigned to:
    $ id -ap oracle
    uid=100(oracle) gid=100(oinstall) groups=100(oinstall),101(dba) projid=100(oracle)
    Following are the snapshots from the prctl command on the current state of the kernel paramters:
    For Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
    $ prctl -n project.max-shm-memory -i project oracle
    project: 100: oracle
    NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
    project.max-shm-memory
    privileged 254MB - deny -
    system 16.0EB max deny -
    The Oracle recommended value is 4GB - I expect Universal Installer check to fail for this, so I change the parameter using the resource control facility by logging in as root in a new terminal and keeping one oracle session active.
    # prctl -n project.max-shm-memory -v 4gb -r -i project oracle
    I can see that the parameter has been set correctly when I do:
    $ prctl -n project.max-shm-memory -i project oracle
    project: 100: oracle
    NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
    project.max-shm-memory
    privileged 4.00GB - deny -
    system 16.0EB max deny -
    For Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
    $ prctl -n project.max-sem-ids -i project oracle
    project: 100: oracle
    NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
    project.max-sem-ids
    privileged 128 - deny -
    system 16.8M max deny -
    The Oracle recommended value is 100 - I do not expect Universal Installer check to fail at this parameter
    For Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
    $ prctl -n project.max-shm-ids -i project oracle
    project: 100: oracle
    NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
    project.max-shm-ids
    privileged 128 - deny -
    system 16.8M max deny -
    The Oracle recommended value is 100 - I do not expect Universal Installer check to fail at this parameter
    Also when I try to issue the command:
    $ prctl -n project.max-sem-nsems -i project oracle
    I get:
    prctl: failed to get resource control for project.max-sem-nsems: Invalid argument
    Oracle recommends I should set a value of 256.
    After setting up all this I still get the following errors from Universal Installer:
    Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
    Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
    Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
    Checking for semsys:seminfo_semmsl=256; found no entry. Failed <<<<
    Check complete. The overall result of this check is: Failed <<<<
    Now when I modify the kernel settings by editing the /etc/system file without even a reboot I'm can see all my Universal Installer Kernel checks as passed.
    Not sure if I'm missing out some crucial step while setting up the kernel parameter using the resource control facility?
    ~ Somjit

    It is bug in OUI.
    OUI is looking at /etc/system to check the kernel parameter settings, but this file is not used (by default) in Solaris 10
    It should check the kernel parameter settings using the prctl.
    Check metalink note 363436.1
    workaround is to
    ./runInstaller -ignoreSysPrereqs
    or as You already did, change /etc/system as well.

  • Segmentation Fault while starting weblogic server - Weblogic 6.0-6.1 on RedHat Linux

    Hi, I have this problem with 6.0 and 6.1 : Can you help me please ?

    Hi ,
    I installed it on Debian 2.2R4 and it works fine so far.
    I only had to tweak the name for a library.
    Probably the SEG Fault comes from the "performance" pack.
    Did you try to run without it?
    What JVM are you using?
    Dan
    "Vincent Morello" <[email protected]> wrote in message
    news:[email protected]..
    Hi, I have this problem with 6.0 and 6.1 : Can you help me please ?

  • Disk Access Failed while Installing Solaris Container.

    I have setup 5 guest domains together with the Control Domain.
    $ ldm list
    Name State Flags Cons VCPU Memory Util Uptime
    primary active -t-cv SP 4 4G 0.8% 2d 2h 15m
    secondary active -t--v 5000 4 2G 0.5% 3h 5m
    dmz active -t--- 5001 8 2G 0.0% 46m
    sunray inactive -----
    application inactive -----
    identity active -t--- 5002 4 4G 0.1% 1h 2m
    In each of the guest domain, I plan to install a number of Solaris Containers to run different applications. While installing one Solaris container (zoneadm �z <zone name> install) in dmz domain, I start the installation/configuration (either zoneadm �z <zone name> install or zlogin �C <zone name>) of another Solaris container in identity domain. Everything starts OK until half way I get an error message as follow:
    Jun 13 18:33:16 dmz vdc: NOTICE: [1] disk access failed.
    The installation of the Solaris Container in dmz halts as soon as I see the message above. Nothing will work except a force stop in the Control Domain using ldm stop �f dmz and restart.
    What happen to the Solaris Container installation/configuration in identity domain? It either continues the process without error or fails with the same error message shortly after. For example,
    Jun 13 18:33:24 identity vdc: NOTICE: [1] disk access failed.
    The vdisks for each guest domain are setup by following the steps on section �Using ZFS Over a Virtual Disk� in LDoms 1.0 Administration Guide. Each guest domain is booted from a disk image in the Control Domain and has two 9GB data vdisks (mapped to two physical 9GB disks on A5200 disk array) running ZFS striping. Each guest domain vdisks are serviced by a separate vdisk server.
    Any idea?

    I am not sure if multiple virtual disk servers are officially supported under current LDoms release.
    I had tried using only one virtual disk server. The same problem exhibited. I thought may be the vds was not able to keep up with the virtual disk I/O. That's why I setup multiple vds.

  • Apache - Weblogic plug-in - Segmentation fault. Please Help me!

    Hi all,
    Im trying to set up Apache weblogic plug-in, and im having problems with
    that.
    Im running Solaris 9 with Apache/1.3.26 (Unix) and Weblogic 7 with sp2.
    Here is what i did:
    I copied mod_wl_ssl.so from
    /bea/weblogic700/server/lib/solaris/mod_wl_ssl.so to /usr/apache/libexec
    Added entries in httpd.conf as
    LoadModule weblogic_module /usr/apache/libexec/mod_wl_ssl.so
    AddModule mod_weblogic.c
    <LocationMatch "\.jsp$">
    SetHandler weblogic-handler
    StatPath false
    </LocationMatch>
    <LocationMatch "/(service1|service2|service3)/">
    SetHandler weblogic-handler
    StatPath false
    </LocationMatch>
    <IfModule mod_weblogic.c>
    WebLogicHost 127.0.0.1
    WebLogicPort 7001
    HungServerRecoverSecs 300
    ConnectTimeoutSecs 5
    </IfModule>
    When i access the url with out specifying port 7001 it's not working.
    I checked the /var/apache/logs/error_log file. Im getting the error as
    child pid 805 exit signal Segmentation Fault (11)
    Am i missing anything here?
    Thank you
    Raja

    You may want to check the certifications for Solaris 9 and the Apache plug-in at
    http://e-docs.bea.com/wls/certifications/certifications/sun_solaris9.html#40366.
    It looks like you will have to upgrade to at least Apache 2.0.39. We had to do
    this on Solaris 8 as well.
    "Raja Balasubramanian" <[email protected]> wrote:
    Thank you Eric,
    I will do that
    Raja
    "Eric Gross" <[email protected]> wrote in message
    news:[email protected]...
    I believe this is going to require more debugging such as attachinga
    debugger(gdb) to Apache and getting a backtrace.
    I suggest opening up a support case.
    Regards,
    Eric
    "Raja Balasubramanian" <[email protected]> wrote in message
    news:[email protected]...
    Hi Eric,
    Thank you for the replies.
    I tried with the same test as you specified. Still im getting the
    same
    problem.
    [Mon Mar 10 13:57:21 2003] [notice] child pid 1184 exit signal
    Segmentation Fault (11)
    Im running Solaris 9 in SPARC platform. It's a Sun E450 server.
    Im using the default apache package which comes with Solaris 9. Ididn't
    do
    anything with apache.
    Bea website says that Weblogic 7 sp2 is certified for Soalris 9.
    That's
    y
    i
    installed Solaris 9.
    I tested the same on a Linux Machine (Redhat Linux 7.1 on IA). It
    works
    fine
    without any problem.
    How can i make things work?
    Thank you for your kind replies
    Raja
    "Eric Gross" <[email protected]> wrote in message
    news:[email protected]...
    Looks like it should work.
    Let's simplify your test:
    <Location /test>
    WebLogicHost 127.0.0.1
    WebLogicPort 7001
    Debug ALL
    DebugConfigInfo ON
    SetHandler weblogic-handler
    </Location>
    Try with just that.
    Another thing is that I am unsure as to whether we have tested
    with
    Solaris
    9. This is SPARC right? Also, can you outline the steps you took
    when
    building apache? Did you use GCC?
    Thanks,
    Eric
    "Raja Balasubramanian" <[email protected]> wrote
    in
    message
    news:[email protected]...
    Hi,
    Now i changed to mod_wl_ssl.so.
    And i changed the httpd.conf as
    LoadModule weblogic_module libexec/mod_wl_ssl.so
    <IfModule mod_weblogic.c>
    WebLogicHost 127.0.0.1
    WebLogicPort 7001
    Debug ALL
    DebugConfigInfo ON
    StatPath true
    HungServerRecoverSecs 300
    ConnectTimeoutSecs 5
    </IfModule>
    But im getting the same error. NO wlproxy.log file is created
    in my
    server.
    I tried Debug ON also. Still the same.
    Am i doing anything wrong?
    Please help me...
    Thank you
    Raja
    "Eric Gross" <[email protected]> wrote in message
    news:[email protected]...
    That means that your apache instance is compiled with -DEAPI
    and
    should
    use
    the mod_wl_ssl.so.
    Can you please try to set Debug ALL and get the log in
    /tmp/wlproxy.log
    and
    share that?
    Thanks,
    Eric
    "Raja Balasubramanian" <[email protected]> wrote
    in
    message
    news:[email protected]...
    Hi Eric,
    When im using mod_wl.so im getting warning from Apache as
    [Mon Mar 10 12:41:15 2003] [warn] Loaded DSO
    libexec/mod_wl.so
    uses
    plain Apache 1.3 API, this module might crash under
    EAPI!
    (please
    recompile it with -DEAPI)
    Thank you
    Raja
    "Eric Gross" <[email protected]> wrote in message
    news:[email protected]...
    Are you using modssl or any apache with EAPI compiled in?
    Otherwise, you should be using the mod_wl.so.
    As well, please set Debug ALL to see if we can get more
    debug.
    Thanks,
    Eric
    "Raja Balasubramanian" <[email protected]>
    wrote
    in
    message
    news:[email protected]...
    Hi all,
    Im trying to set up Apache weblogic plug-in, and im having
    problems
    with
    that.
    Im running Solaris 9 with Apache/1.3.26 (Unix) and Weblogic
    7
    with
    sp2.
    Here is what i did:
    I copied mod_wl_ssl.so from
    /bea/weblogic700/server/lib/solaris/mod_wl_ssl.so to/usr/apache/libexec
    Added entries in httpd.conf as
    LoadModule weblogic_module/usr/apache/libexec/mod_wl_ssl.so
    AddModule mod_weblogic.c
    <LocationMatch "\.jsp$">
    SetHandler weblogic-handler
    StatPath false
    </LocationMatch>
    <LocationMatch "/(service1|service2|service3)/">
    SetHandler weblogic-handler
    StatPath false
    </LocationMatch>
    <IfModule mod_weblogic.c>
    WebLogicHost 127.0.0.1
    WebLogicPort 7001
    HungServerRecoverSecs 300
    ConnectTimeoutSecs 5
    </IfModule>
    When i access the url with out specifying port 7001 it's
    not
    working.
    I checked the /var/apache/logs/error_log file. Im getting
    the
    error
    as
    child pid 805 exit signal Segmentation Fault
    (11)
    Am i missing anything here?
    Thank you
    Raja

  • 2.6.30 kernel + powernow-k8 gives modprobe segmentation fault at boot

    Dear all,
    hi there, that's another (Archlinux) forum newbie.
    I've been running the 64 bit flavour of Archlinux flawlessy on my asus l5d (1st generation amd athlon 64 3000+, 768 mb ram) until the recent kernel version bump (2.6.29.4 => 2.6.30).
    From there on my system is experiencing segmentation fault while loading powernow-k8. Here you have the relevant dmesg extract
    processor ACPI_CPU:00: registered as cooling_device0
    powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores)
    (version 2.20.00)
    BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
    IP: [<ffffffffa041451d>] powernowk8_cpu_init+0x364/0xad2 [powernow_k8]
    PGD 2ee22067 PUD 2e8dc067 PMD 0
    Oops: 0002 [#1] PREEMPT SMP
    last sysfs file: /sys/module/snd_pcm_oss/initstate
    CPU 0
    Modules linked in: powernow_k8(+) freq_table processor vboxnetflt vboxdrv snd_se
    q_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_a
    c97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundco
    re ac97_bus slhc skge rtc_cmos rtc_core rtc_lib ext3 jbd mbcache ohci_hcd sr_mod
    ehci_hcd cdrom sd_mod usbcore ata_generic pata_amd pata_acpi libata scsi_mod
    Pid: 975, comm: modprobe Not tainted 2.6.30-ARCH #1 L5D
    RIP: 0010:[<ffffffffa041451d>] [<ffffffffa041451d>] powernowk8_cpu_init+0x364/0
    xad2 [powernow_k8]
    RSP: 0018:ffff88002eec3cc8 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: ffff88002eecd100 RCX: 0000000000000000
    RDX: 0000000000000003 RSI: 00000000000c3500 RDI: 0000000000000012
    RBP: ffff88002efe6300 R08: 0000000000000003 R09: ffff88002efe6600
    R10: ffff88002ef032a0 R11: 0000000000000000 R12: ffff88002ebde640
    R13: 0000000000000003 R14: ffff88002efe6340 R15: 0000000000000002
    FS: 00007f00d10276f0(0000) GS:ffff88000100b000(0000) knlGS:0000000000000000
    CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 000000000000001c CR3: 000000002ee62000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Process modprobe (pid: 975, threadinfo ffff88002eec2000, task ffff88002efab280)
    Stack:
    ffffffff807c1e60 000000000d58bd2a ffff88002eec3d28 ffffffff803bde0f
    000000020000000e 000000000d58bd2a 000000000000e790 000000000d58bd2a
    0000000000000000 0000000000000000 ffff88002eecd100 ffff880001016428
    Call Trace:
    [<ffffffff803bde0f>] ? vsnprintf+0x30f/0x5d0
    [<ffffffff8048059d>] ? cpufreq_add_dev+0x1cd/0x690
    [<ffffffff8054e8e8>] ? __mutex_lock_slowpath+0x238/0x340
    [<ffffffff80461906>] ? sysdev_driver_register+0xb6/0x150
    [<ffffffffa0414c8b>] ? powernowk8_init+0x0/0xca [powernow_k8]
    [<ffffffff8047f3c4>] ? cpufreq_register_driver+0xa4/0x190
    [<ffffffff8020907b>] ? do_one_initcall+0x4b/0x1b0
    [<ffffffff802727a9>] ? __blocking_notifier_call_chain+0x79/0xc0
    [<ffffffff80288680>] ? sys_init_module+0xd0/0x220
    [<ffffffff8020c442>] ? system_call_fastpath+0x16/0x1b
    Code: 49 8b 04 00 48 69 d0 e8 03 00 00 48 39 d1 74 23 69 d0 e8 03 00 00 48 c7 c7
    b0 56 41 a0 31 c0 e8 2d 84 13 e0 48 8b 45 38 44 89 ea <c7> 44 d0 04 ff ff ff ff
    41 83 c5 01 44 3b 6d 68 0f 82 0c ff ff
    RIP [<ffffffffa041451d>] powernowk8_cpu_init+0x364/0xad2 [powernow_k8]
    RSP <ffff88002eec3cc8>
    CR2: 000000000000001c
    ---[ end trace 7086b00b1b998fa9 ]---
    The system continues booting surprisingly well, but everything gets hotter and hotter (I used to have it running at 800 mhz to reduce fan activity, as I don't really need full speed).
    I only wrote to know if anyone has got into similar troubles - I had a look over recent kernel ChangeLog and I've seen some activity about powernow-k8, but not really something
    I might have thought would blow everything up. I'd like also to be pointed at custom patches someone may have come up with  - I've no problem messing with kernel recompilation: if this doesn't get fixed in a new package, I'm thinking about reverting to 2.6.29.4 - or maybe some kernel parameters to cover the thing (at the moment and up until 2.6.29, II need "noapic nolapic").
    Thank you in advance. Let me know if you need additional info.

    I can confirm that powernow_k8 is broken somehow. I just got this when trying to change the governour. But I cannot reproduce it.
    INFO: task kondemand/0:3657 blocked for more than 120 seconds.
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    kondemand/0 D ffff88007e7992f0 0 3657 2
    ffff88007e7992f0 0000000000000046 000000007ef643c0 ffffffff8023f294
    ffffffff80826130 ffff88007ea2eb50 ffff88007e799590 00000000000111c0
    000000000000cb68 ffff88007e799590 ffff88007be8fdd0 ffff8800010211c0
    Call Trace:
    [<ffffffff8023f294>] ? task_rq_lock+0x64/0xc0
    [<ffffffff8054d9a9>] ? schedule+0x29/0x70
    [<ffffffff80550525>] ? __down_write_nested+0x95/0xe0
    [<ffffffff8048030b>] ? lock_policy_rwsem_write+0x5b/0xb0
    [<ffffffffa0d8b8c9>] ? do_dbs_timer+0x69/0x370 [cpufreq_ondemand]
    [<ffffffffa0d8b860>] ? do_dbs_timer+0x0/0x370 [cpufreq_ondemand]
    [<ffffffff80266431>] ? worker_thread+0x161/0x300
    [<ffffffff8026c6d0>] ? autoremove_wake_function+0x0/0x60
    [<ffffffff802662d0>] ? worker_thread+0x0/0x300
    [<ffffffff8026c0b4>] ? kthread+0x64/0xc0
    [<ffffffff8024ae30>] ? schedule_tail+0x30/0x80
    [<ffffffff8020d4fa>] ? child_rip+0xa/0x20
    [<ffffffff8026c050>] ? kthread+0x0/0xc0
    [<ffffffff8020d4f0>] ? child_rip+0x0/0x20
    INFO: task cpufreq-set:14658 blocked for more than 120 seconds.
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    cpufreq-set D 000000007c9e91cb 0 14658 1
    ffff88006a0bf1a0 0000000000000082 0000000000000000 ffff880040d6ed80
    ffff88006a0bc570 ffff88007ee52c30 ffff88006a0bf440 00000000000111c0
    000000000000cb68 ffff88006a0bf440 ffff88006a0c7740 ffff880040d6ed80
    Call Trace:
    [<ffffffff8054d2e7>] ? thread_return+0x4e/0x6e7
    [<ffffffff80214d05>] ? sched_clock+0x5/0x10
    [<ffffffff8054d9a9>] ? schedule+0x29/0x70
    [<ffffffff8054df25>] ? schedule_timeout+0x1a5/0x1f0
    [<ffffffff8054d9a9>] ? schedule+0x29/0x70
    [<ffffffff8054df25>] ? schedule_timeout+0x1a5/0x1f0
    [<ffffffff8054cd6d>] ? wait_for_common+0xdd/0x1b0
    [<ffffffff802494d0>] ? default_wake_function+0x0/0x40
    [<ffffffff80267210>] ? __cancel_work_timer+0x1c0/0x1d0
    [<ffffffff80266b50>] ? wq_barrier_func+0x0/0x40
    [<ffffffffa0d8bce7>] ? cpufreq_governor_dbs+0x117/0x37c [cpufreq_ondemand]
    [<ffffffff803ba272>] ? __up_read+0x32/0xe0
    [<ffffffff8047e5bc>] ? __cpufreq_governor+0xec/0x170
    [<ffffffff8047f2be>] ? __cpufreq_set_policy+0x15e/0x1c0
    [<ffffffff8047fb93>] ? store_scaling_governor+0x113/0x230
    [<ffffffff80480c10>] ? handle_update+0x0/0x40
    [<ffffffff8047fa80>] ? store_scaling_governor+0x0/0x230
    [<ffffffff80480ad1>] ? store+0x71/0xc0
    [<ffffffff8036b535>] ? sysfs_write_file+0xe5/0x190
    [<ffffffff802fc204>] ? vfs_write+0xe4/0x1c0
    [<ffffffff802fc3fe>] ? sys_write+0x5e/0xb0
    [<ffffffff802f8f2b>] ? do_sys_open+0xdb/0x130
    [<ffffffff8020c442>] ? system_call_fastpath+0x16/0x1b

  • Solaris 9 live upgrade to solaris 10 segmentation fault

    pre-upgrade work:
    apply patch doc 72099
    upgrade live upgrade to solaris 10.
    lucreate-m /:/dev/dsk/c0t1d0s0:ufs -m /var:/dev/dsk/c0t1d0s1:ufs -m /opt:/dev/dsk/c0t1d0s3:ufs -n sol10
    it works well
    oot Environment Is Active Active Can Copy
    Name Complete Now On Reboot Delete Status
    sol9 yes yes yes no -
    sol10 yes no no yes -
    But luupgrade -u -n sol10 -s /sol11
    Validating the contents of the media </sol11>.
    The media is a standard Solaris media.
    The media contains an operating system upgrade image.
    The media contains <Solaris> version <11>.
    Constructing upgrade profile to use.
    Locating the operating system upgrade program.
    Checking for existence of previously scheduled Live Upgrade requests.
    Creating upgrade profile for BE <sol10>.
    Determining packages to install or upgrade for BE <sol10>.
    Performing the operating system upgrade of the BE <sol10>.
    CAUTION: Interrupting this process may leave the boot environment unstable
    or unbootable.
    /usr/sbin/luupgrade&#91;677&#93;: 6549 Segmentation Fault(coredump)
    ERROR: Installation of the packages from this media of the media failed; pfinstall returned these diagnostics:
    The Solaris upgrade of the boot environment <sol10> failed.

    I would break your mirror and do a liveupgrade on the available mirror. Then boot that disk.

  • Java.Lang Error while installing SMC on Solaris 8 x86

    Hi
    I am sukrut and I am facing one problem during installation of Solaris Management Console.
    When I am executing the installlation script by #sh Solaris_Management_Console.shar then
    in my system is showing following error at console.
    Stack trace failed with exception: java.lang.NullPointerException
    SIGSEGV 11* segmentation violation
    si_signo [11]: SIGSEGV 11* segmentation violation
    si_errno [0]: Error 0
    si_code [1]: SEGV_MAPERR [addr: 0x20]
    stackpointer=DB2BFF3C
    Inconsistent thread : best efforts attempt (may fail)
    "AWT-EventQueue-0" (TID:0x832b978, sys_thread_t:0x832b8c8, state:R, thread_t: t@8, threadID:0xdb2c0d68, stack_bottom:0xdb2c0d68, stack_size:0x1fd68) prio=6 current thread
    [1] java.awt.EventDispatchThread.pumpOneEvent(EventDispatchThread.java:100)
    [2] java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:91)
    [3] java.awt.EventDispatchThread.run(EventDispatchThread.java:83)
    Inconsistent thread : best efforts attempt (may fail)
    <null>./installer[186]: 662 Segmentation Fault(coredump)
    Removing temporary files...

    Thanks Thiru.
    It was a trivial issue. The cfgenv.sh file was not executed properly and that was causing all the issues. Thanks for your reply. Issue has been resolved on this server.
    But on another server I am getting a different error while trying to configure the gateway server. Please if anybody has faced this issue before kindly provide the solution.
    Running InstallShield Wizard...
    Loading Configuration wizard File,
    "/siebel/install_ini/8.1.1.0/gateway_response.xml" with configuration wizard
    "<NULL>" failed.
    [Press Enter to close Siebel Configuration Wizard]

  • Error while installing a patch for Mainwin 5.0.2 on Solaris 2.8

    Hi,
    I am relatively new in this field, so i apologise for any slip-ups.
    We use a Solaris 2.8-SPARC server. I was given an external drive which contained the porting software Visual Mainwin 5.0.2 and was told to install it from the drive. On checking it, i found that the entire folder structure of the software was damaged, i.e. every file of the software was changed to uppercase. UNIX being highly case-sensitive, i manually changed each and every file present in the software directory to lowercase and then ran it.
    The software ran fine, it got installed and the license server was also up. the licenses were also nicely distributed. everything was fine until i was asked to install the patch 'vmw502_sunos5_HF1.sh'. While installing i got the following output :
    # sh vmw502_sunos5_HF*
    Extracting installation package to "/tmp/mwspselfextr27624".
    Please stand by ... Done.
    =====================================================================
    Visual MainWin Patch Installation
    HF1 for VMW 5.0.2 <sunos5> 24-Jul-2003.14:01 Cycle115
    =====================================================================
    ***Error: cannot find file
    /export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini
    Something wrong with your Visual MainWin installation - aborting
    when i checked the installation directory, i found that the file 'mwversion.ini' was present inside the directory 'mwver'. I cant see any reason why the patch is not recognizing the file.
    Can anybody help?? Any kind of help will really be appreciated.
    -SD

    Hope you already tried: ls -l /export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini If ls returns the file name, try running the script under truss to find some clues.
    % truss -f -vall -rall -wall -o /tmp/mwpatch.log sh vmw502_sunos5_HF*

Maybe you are looking for

  • Unable to upload only modified files to FTP site

    Everytime I upload to FTP host, I select "Only modified files", but all files are updated instead. What's the problem? Thanks, Greg

  • List of Open Hub Destination

    Hi All, Is there a table which list out all the open hub destination? Saurabh.

  • IPod to iTunes transferring *from different account*

    Okay so i ran out of money on my itunes account so i used my moms to get Scheibe by Lady GaGa, i downloaded it on my ipod touch. I need to transfer it to my computer but it wont let me. I tried authorizing my itunes with her account and signing in on

  • Tables without any entries in it.

    Hello experts, I am new to ABAP development environment. The following tables do not have any valid data in client 001.  The tables are :  MARA, BKPF, BSEG,EKKO,EKPO,VBAK,VBAP But i don't have the access to any other client...so can you please tell m

  • Adding Sound to Movie Clips

    I am relatively new to Flash and I have taken over a Flash project that was made out of Movie Clips (.swfs). This was done by creating the presentation out of 5 separate documents (saved as .swfs) with a behavior action added to the last frame of eac