Select data into deep internal table

Dear Experts.
I created a dynamiv deep internal table.
while selecting data , into the internal table it is giving a dump. saying that deep structure.
SELECT OBJTY OBJID ARBPL WERKS from crhd
INTO CORRESPONDING FIELDS OF TABLE <f_tab>
where WERKS = pr_werks.
I used the field catalog also.even same error is comming.
how to get data into deep internal table by select statement.
Please help me,
Regards,
Rahul

HI,
Try creating dynamic internal table like:
Field-symbols: <dyn_table> type standard table,
 <dyn_wa> ,
 <dyn_field>.
Data: dy_table type ref to data,
 ifc type lvc_t_fcat ,
 xfc type lvc_s_fcat ,
 Count type i ,
 Count1 type i ,
 Index type i ,
 dy_line type ref to data.
 Data counter type i.
Data: line type string ,
 List like table of line.
Data: idetails type abap_compdescr_tab,
 xdetails type abap_compdescr .
Data: ref_table_des type ref to cl_abap_structdescr.
*Looping at field cat internal table to populate another field cat to be passed
* In method used below for creating final dynamic internal table
Loop at fieldcat into fieldcat1.
 Clear xfc.
 Xfc-fieldname = fieldcat1-fieldname.
 Xfc-datatype = fieldcat1-datatype.
 Xfc-intlen = fieldcat1-intlen.
 Append xfc to ifc.
endloop.
Clear fieldcat1.
*Method called to create dynamic internal table on the basis of field catalog created above
Call method cl_alv_table_create=>create_dynamic_table
 Exporting
 it_fieldcatalog = ifc u201Cfield catalog appended above
 Importing
 ep_table = dy_table. u201CDynamic internal table which will be created
Assign dy_table->* to <dyn_table>.
*Create dynamic work area and assign to FS
Create data dy_line like line of <dyn_table>.
Assign dy_line->* to <dyn_wa>.
Then use this dynamic internal table created from above method
in the Select Query.
Hope it helps
Regards
Mansi

Similar Messages

How to select data from an internal table

material                          norm                    date last modified
B2-SP HEAT                 50.000               20090420
BF COKE                                 575.000               20090419
GROSS COKE                 200.000               20090419
B2-SP HEAT                 100.000               20090419
TWT                                 33.000               20090330
B7-SP HEAT                 2.000               20090310
B1-SP HEAT                 1.000               20090309
B7-SP HEAT                 615.000               20090308
B2-SP HEAT                 585.000               20090308
B1-SP HEAT                 100.000               20090308
B3-SP HEAT                 610.000               20090308
BF COKE                                 68.500               20090308
GROSS COKE                 72.600               20090308
B8-SP HEAT                 600.000               20090308
B9-SP HEAT                 625.000               20090308
BX-SP HEAT                 615.000               20090308
B9-SP HEAT                 58.000               20090307
B1-SP HEAT                 100.000               20090307
B6-SP HEAT                 350.000               20090306
B2-SP HEAT                 888.000               20090306
Like above there r numerous data in a table :
how will i select data into another internal table where material above is not repeated with latest modified date.please help.

Hi Sonu,
The main task is to move the contents of the one internal table to another with some condition.
First sort and delete the duplicate entries from the First Internal table like below :
sort it_tab by material ascending date_modified descending.
delete adjacent duplicates from it_tab.
Then move that Internal table contents to another internal table.
Define another internal table with the same structure as you have first internal table and then
Second Step :
it_itab1 = it_itab.
If you are using seperate Header line and Body then you can do like below :
       it_itab1[] = it_itab[].
This will fix the issue.
Please let me know if you need any further explonation.
Regards,
Kittu
Edited by: Kittu on Apr 24, 2009 12:21 PM

How to read a table and transfer the data into an internal table?

Hello,
I try to read all the data from a table (all attribute values from a node) and to write these data into an internal table. Any idea how to do this?
Thanks for any help.

Hi,
Check this code.
Here i creates context one node i.e flights and attributes are from SFLIGHT table.
DATA: lo_nd_flights TYPE REF TO if_wd_context_node,
 lo_el_flights TYPE REF TO if_wd_context_element,
 ls_flights TYPE if_main=>element_flights,
 it_flights type if_main=>elements_flights.
navigate from <CONTEXT> to <FLIGHTS> via lead selection
lo_nd_flights = wd_context->get_child_node( 'FLIGHTS' ).
CALL METHOD LO_ND_FLIGHTS->GET_STATIC_ATTRIBUTES_TABLE
IMPORTING
 TABLE = it_flights.
now the table data will be in internal table it_flights.

Select Data from 2 intern tables

Hi Experts,
how I can select Data from 2 intern Tables into another intern table?
For Example:
My Result Table has the fields: mandt, user, ID, ID_Name.
My select table no. 1 has the fields mandt, XYZ (like A_Name), ID, ID_Name, ...
My select table no. 2 has the fields mandt, A_Name, User, ...
I want to search for all entries in select table no. 1 and 2. where are a_name have the same worth.
How I can select my Dates?
Regards,
Mike

hii
you can do it by using for all entries and with READ statement ..do like follow code
IF i_marc[] IS NOT INITIAL.
    SELECT matnr                       " Material Number
           werks                       " Plants
           lgort                       " Storage Location
      FROM mard
      INTO TABLE i_mard
       FOR ALL ENTRIES IN i_marc
     WHERE matnr EQ i_marc-matnr
       AND werks EQ i_marc-werks
       AND lgort IN s_lgort.
ENDIF.                               " IF i_mara[] IS NOT INITIAL
IF sy-subrc EQ 0.
    LOOP AT i_output INTO wa_output.
      READ TABLE i_mard INTO wa_mard WITH KEY matnr = wa_output-matnr.
      wa_output-lgort = wa_mard-lgort.
      MODIFY i_output FROM wa_output.
      CLEAR wa_output.
    ENDLOOP.                           " LOOP AT i_output
ENDIF.                               " IF sy-subrc EQ 0
regards
twinkal

How can i add two table data into third internal table see below

hi i insert diffferent table data into different internal table i did try to insert two different internal table data into third internal table by using move
but only single data is coming please help me
i want this two internal table data inot third internal table.
sELECT * FROM J_1IEXCHDR INTO CORRESPONDING FIELDS OF ITAB1 WHERE STATUS = 'P'.
SELECT * FROM J_1IEXCDTL INTO CORRESPONDING FIELDS OF ITAB2 WHERE LIFNR = J_1IEXCHDR-LIFNR.
                         AND DOCYR = J_1IEXCHDR-DOCYR,
                         AND DOCNO = J_1IEXCHDR-DOCNO.
WRITE: / ITAB1-LIFNR,
          ITAB1-DOCNO,
          ITAB1-EXYEAR,
          ITAB1-BUDAT,
          ITAB2-EXBED,
          ITAB2-RDOC,
          ITAB2-ECS.
ENDSELECT.
ENDSELECT.
thank you .

hi
Two add two internal tables data. first we need to create third internal table with all the fields of first two internal tables.
later u move the two internal tables data to third internal table
by looping the internal table which have more records or depending on the requirement and move the corresponding fields of first internal table to the third internal table and use the read statement with condition based on primary key of first itab and get the corresponding data of 2table into 3table.
i am sending the sample code to u.
check it out. i think u will understand how to move.
select vbeln waerk netwr erdat audat kunnr
   into table it_vbeln
   from vbak
   where vbeln in s_vbeln
     and erdat in s_erdat.
if not it_vbeln[] is initial.
select kunnr name1
   into table it_kunnr
   from kna1
   for all entries in it_vbeln
     where kunnr = it_vbeln-kunnr.
endif.
loop at it_vbeln.
clear it_final.
   it_final-vbeln = it_vbeln-vbeln.
   it_final-waerk = it_vbeln-waerk.
   it_final-netwr = it_vbeln-netwr.
   it_final-erdat = it_vbeln-erdat.
   it_final-audat = it_vbeln-audat.
read table it_kunnr with key kunnr = it_vbeln-kunnr.
   it_final-name1 = it_kunnr-name1.
append it_final.
endloop.

How to send multiple row data into an internal table??

I have a view with table control.i want to select multiple row and send all the row data into an internal table.i am able to select multiple row but all the selected row data is not going to the internal table.....only a particular row data which is lead selected is going.
Do anyone can help me regarding this issue?
Thanks in advance,
Subhasis.

Hey,
Some code example:
declaring an internal table and work area to get all the elements from the node.
data : lt_Elements type WDR_CONTEXT_ELEMENT_SET,
         ls_Element type WDR_CONTEXT_ELEMENT_SET,
considering flights is my node.
         lt_data type sflight.
Node_Flights is the ref of the node to which ur table is binded.
Use Code Inspector to read the node.
lt_Element = Node_Flights->GET_ELEMENTS
loop at lt_elements into ls_Element.
l_bollean =   ls_elements->is_selected ( returns abap true/false ).
    if l_bollean IS INITIAL.
       append ls_Element to lt_data.
   endif.
Hope this would help.
Cheers,
Ashish

Header data and item data into same internal table

Hi Experts,
I WANT TO KNOW THE LOGIC TO POPULATE HEADER DATA AND ITEM DATA INTO SAME INTERNAL TABLE AND AGAIN DOWNLOAD THE SAME TO EXCEL FILE .Output file should be displayed like this format
Header1 rectyp ,hdnum ,sbank ,bankl ,accnr , paytp , crda ,iso.
Item1 : rectyp ,valut ,cknum ,amount,bankl,accnr,pdate,bnktc.
Item2 : rectyp ,valut ,cknum ,amount,bankl,accnr,pdate,bnktc.
Header2: rectyp ,hdnum ,sbank ,bankl ,accnr , paytp , crda ,iso.
Item1 : rectyp ,valut ,cknum ,amount,bankl,accnr,pdate,bnktc.
Thanks
Moderator message: Please do not use all upper case in the future.
Edited by: Thomas Zloch on May 12, 2010 3:10 PM

Hi,
for example we have 3 internal tables
1> it_header 2>it_items 3>it_final (which contains all the header and item fields)
once it_header it_items are filled
loop at it_items.
read table it_header with key xyz = it_item-xyz.
if sy-subrc = 0.
here move all the header fields to it_final like below.
it_final -xfield = it_header-xfield.
endif.
here move all the item fields to it_final like below.
it_final -yfield = it_item-yfield.
append it_final.
clear it_final.
endloop.
now header and item fileds will be fillled in it_item

Download the KTOPL field data and GLT0 table data into one Internal table

Hi,
I have downloaded GLT0 table fields data to PC file . But i need to download KTOPL(Chart Of Accounts) data also. in GLT0 table there is no KTOPL field.
But in SKA1 table have KTOPL field. Then what is the issue is GLT0 data & KTOPL field data needs to download into one Internal Table.
anybody could you please solve this problem. immediately need to solve this.
Below is the code.
REPORT ZFXXEABL_1 NO STANDARD PAGE HEADING
 LINE-SIZE 200.
Tables Declaration
TABLES : GLT0.
Data Declaration
DATA : FP(8) TYPE C,
 YEAR LIKE GLT0-RYEAR,
 PERIOD(3) TYPE C,
 DBALANCE LIKE VBAP-NETWR VALUE 0 ,
 CBALANCE LIKE VBAP-NETWR VALUE 0.
*Internal table for for final data..
DATA : BEGIN OF REC1 OCCURS 0,
 BAL LIKE GLT0-TSLVT value 0,
 COAREA LIKE GLT0-RBUSA,
 CA(4) TYPE C,
 KTOPL LIKE ska1-ktopl,
 CCODE LIKE GLT0-BUKRS,
 CREDIT LIKE VBAP-NETWR,
 CURRENCY LIKE GLT0-RTCUR,
 CURTYPE(2) TYPE N,
 DEBIT LIKE VBAP-NETWR,
 YEAR(8) TYPE C,
 FY(2) TYPE C,
 ACCOUNT LIKE GLT0-RACCT,
 VER LIKE GLT0-RVERS,
 VTYPE(2) TYPE N,
 CLNT LIKE SY-MANDT,
 S_SYS(3) TYPE C,
 INDICATOR LIKE GLT0-DRCRK,
 END OF REC1.
DATA : C(2) TYPE N,
 D(2) TYPE N.
DATA REC1_H LIKE REC1.
Variable declarations
DATA :
 W_FILES(4) TYPE N,
 W_DEBIT LIKE GLT0-TSLVT,
 W_CREDIT LIKE GLT0-TSLVT,
 W_PCFILE LIKE RLGRAP-FILENAME ,
 W_UNIXFILE LIKE RLGRAP-FILENAME,
 W_PCFILE1 LIKE RLGRAP-FILENAME,
 W_UNIXFIL1 LIKE RLGRAP-FILENAME,
 W_EXT(3) TYPE C,
 W_UEXT(3) TYPE C,
 W_PATH LIKE RLGRAP-FILENAME,
 W_UPATH LIKE RLGRAP-FILENAME,
 W_FIRST(1) TYPE C VALUE 'Y',
 W_CFIRST(1) TYPE C VALUE 'Y',
 W_PCFIL LIKE RLGRAP-FILENAME.
DATA: "REC LIKE GLT0 OCCURS 0 WITH HEADER LINE,
 T_TEMP LIKE GLT0 OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF REC3 OCCURS 0.
 INCLUDE STRUCTURE GLT0.
DATA: KTOPL LIKE SKA1-KTOPL,
 END OF REC3.
DATA: BEGIN OF T_KTOPL OCCURS 0,
 KTOPL LIKE SKA1-KTOPL,
 SAKNR LIKE SKA1-SAKNR,
 END OF T_KTOPL.
Download data.
DATA: BEGIN OF I_REC2 OCCURS 0,
 BAL(17), " like GLT0-TSLVT value 0,
 COAREA(4), " like glt0-rbusa,
 CA(4), " chart of accounts
 CCODE(4), " like glt0-bukrs,
 CREDIT(17), " like vbap-netwr,
 CURRENCY(5), " like glt0-rtcur,
 CURTYPE(2), " type n,
 DEBIT(17), " like vbap-netwr,
 YEAR(8), " type c,
 FY(2), " type c, fiscal yr variant
 ACCOUNT(10), " like glt0-racct,
 VER(3), " like glt0-rvers,
 VTYPE(3), " type n,
 CLNT(3), "like sy-mandt,
 S_SYS(3), "like sy-sysid,
 INDICATOR(1), " like glt0-drcrk,
 END OF I_REC2.
Selection screen. *
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1.
SELECT-OPTIONS : COMPCODE FOR GLT0-BUKRS,
 GLACC FOR GLT0-RACCT,
 FISYEAR FOR GLT0-RYEAR,
 no intervals no-extension, "- BG6661-070212
 FISCPER FOR GLT0-RPMAX,
 busarea for glt0-rbusa,
 CURRENCY FOR GLT0-RTCUR.
SELECTION-SCREEN END OF BLOCK BL1.
SELECTION-SCREEN BEGIN OF BLOCK BL2 WITH FRAME TITLE TEXT-BL2.
PARAMETERS:
P_UNIX AS CHECKBOX, "Check box for Unix Option
P_UNFIL LIKE RLGRAP-FILENAME, " Unix file Dnload file name
 default '/var/opt/arch/extract/GLT0.ASC', "- BG6661-070212
P_PCFILE AS CHECKBOX, "Check box for Local PC download.
P_PCFIL LIKE RLGRAP-FILENAME " PC file Dnload file name
 default 'C:\GLT0.ASC'. "- BG6661-070212
 DEFAULT 'C:\glt0_gl_balance_all.asc'. "+ BG6661-070212
SELECTION-SCREEN END OF BLOCK BL2.
*eject
Initialization. *
INITIALIZATION.
Try to default download filename
p_pcfil = c_pcfile.
p_unfil = c_unixfile.
if sy-sysid eq c_n01.
 p_unfil = c_unixfile.
endif.
if sy-sysid eq c_g21.
 p_unfil = c_g21_unixfile.
endif.
if sy-sysid eq c_g9d.
 p_unfil = c_g9d_unixfile.
endif.
Default for download filename
*{ Begin of BG6661-070212
CONCATENATE C_UNIXFILE
 SY-SYSID C_FSLASH C_CHRON C_FILENAME INTO P_UNFIL.
*} End of BG6661-070212
AT SELECTION-SCREEN OUTPUT.
loop at screen.
 if screen-name = 'P_PCFIL'. "PC FILE
 screen-input = '0'.
 modify screen.
 endif.
 if screen-name = 'P_UNFIL'. "UN FILE
 screen-input = '0'.
 modify screen.
 endif.
endloop.
if w_first = 'Y'.
 perform path_file.
 w_first = 'N'.
endif.
if w_cfirst = 'Y'.
 perform cpath_file.
 w_cfirst = 'N'.
endif.
Start-of-Selection. *
START-OF-SELECTION.
*COLLECT DATA
PERFORM COLLECT_DATA.
*BUILD FILENAMES
PERFORM BUILD_FILES.
*LOCAL
IF P_PCFILE = C_YES.
 PERFORM LOCAL_DOWNLOAD.
ENDIF.
*UNIX
IF P_UNIX = C_YES.
 PERFORM UNIX_DOWNLOAD.
ENDIF.
IF P_PCFILE IS INITIAL AND P_UNIX IS INITIAL.
 MESSAGE I000(ZL) WITH 'Down load flags both are unchecked'.
ENDIF.
END-OF-SELECTION.
IF P_PCFILE = C_YES.
WRITE :/ 'PC File' , C_UNDER, P_PCFIL.
ENDIF.
*& Form DOWNLOAD
 Download *
FORM DOWNLOAD.
P_PCFIL = W_PATH.
DATA LIN TYPE I.
DESCRIBE TABLE I_REC2 LINES LIN.
WRITE:/ 'No of Records downloaded = ',LIN.
CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
 FILENAME = P_PCFIL
 FILETYPE = C_ASC "c_dat "dat
 TABLES
 DATA_TAB = I_REC2 " t_str
 fieldnames = t_strhd
 EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_WRITE_ERROR = 2
 INVALID_FILESIZE = 3
 INVALID_TABLE_WIDTH = 4
 INVALID_TYPE = 5
 NO_BATCH = 6
 UNKNOWN_ERROR = 7
 OTHERS = 8.
IF SY-SUBRC EQ 0.
ENDIF.
ENDFORM.
*& Form WRITE_TO_SERVER
 text *
--> p1 text
<-- p2 text
FORM WRITE_TO_SERVER.
DATA : L_MSG(100) TYPE C,
 L_LINE(5000) TYPE C.
P_UNFIL = W_UPATH.
DATA LIN TYPE I.
DESCRIBE TABLE I_REC2 LINES LIN.
WRITE:/ 'No of Records downloaded = ',LIN.
OPEN DATASET P_UNFIL FOR OUTPUT IN TEXT MODE. " message l_msg.
IF SY-SUBRC <> 0.
 WRITE: / L_MSG.
ENDIF.
perform header_text1.
LOOP AT I_REC2.
 TRANSFER I_REC2 TO P_UNFIL.
ENDLOOP.
CLOSE DATASET P_UNFIL.
WRITE : / C_TEXT , W_UPATH.
SPLIT W_UNIXFILE AT C_DOT INTO W_UNIXFIL1 W_UEXT.
CLEAR W_UPATH.
IF NOT W_UEXT IS INITIAL.
 CONCATENATE W_UNIXFIL1 C_DOT W_UEXT INTO W_UPATH.
ELSE.
 W_UEXT = C_ASC. " c_csv.
 CONCATENATE W_UNIXFIL1 C_DOT W_UEXT INTO W_UPATH.
ENDIF.
ENDFORM. " WRITE_TO_SERVER
*& Form BUILD_FILES
FORM BUILD_FILES.
IF P_PCFILE = C_YES.
 W_PCFILE = P_PCFIL.
***Split path at dot**
 SPLIT W_PCFILE AT C_DOT INTO W_PCFILE1 W_EXT.
 IF NOT W_EXT IS INITIAL.
 CONCATENATE W_PCFILE1 C_DOT W_EXT INTO W_PATH.
 ELSE.
 W_PATH = W_PCFILE1.
 ENDIF.
ENDIF.
IF P_UNIX = C_YES.
 W_UNIXFILE = P_UNFIL.
 SPLIT W_UNIXFILE AT C_DOT INTO W_UNIXFIL1 W_UEXT.
 IF NOT W_UEXT IS INITIAL.
 CONCATENATE W_UNIXFIL1 C_DOT W_UEXT INTO W_UPATH.
 ELSE.
 W_UPATH = W_UNIXFIL1.
 ENDIF.
ENDIF.
ENDFORM.
FORM CPATH_FILE.
CLEAR P_PCFIL.
 CONCATENATE C_PCFILE
 C_COMFILE SY-SYSID C_UNDER SY-DATUM SY-UZEIT
 C_DOT C_ASC INTO P_PCFIL.
ENDFORM. " CPATH_FILE
FORM PATH_FILE.
CLEAR P_UNFIL.
if sy-sysid eq c_n01.
 CONCATENATE C_UNIXFILE
 C_COMFILE SY-SYSID C_UNDER SY-DATUM SY-UZEIT
 C_DOT C_ASC INTO P_UNFIL.
endif.
if sy-sysid eq c_g21.
concatenate c_g21_unixfile
 c_comfile sy-sysid c_under sy-datum sy-uzeit
 c_dot c_asc into p_unfil.
endif.
if sy-sysid eq c_g9d.
concatenate c_g9d_unixfile
 c_comfile sy-sysid c_under sy-datum sy-uzeit
 c_dot c_asc into p_unfil.
endif.
ENDFORM. " PATH_FILE
Local_Download *
 Local *
FORM LOCAL_DOWNLOAD.
perform header_text.
LOOP AT REC1.
REC1-CLNT = SY-MANDT.
REC1-S_SYS = SY-SYSID.
MOVE: REC1-BAL TO I_REC2-BAL,
 REC1-COAREA TO I_REC2-COAREA,
 REC1-CA TO I_REC2-CA,
 REC1-KTOPL TO I_REC2-CA,
 REC1-CCODE TO I_REC2-CCODE,
 REC1-CREDIT TO I_REC2-CREDIT,
 REC1-CURRENCY TO I_REC2-CURRENCY,
 REC1-CURTYPE TO I_REC2-CURTYPE,
 REC1-DEBIT TO I_REC2-DEBIT,
 REC1-YEAR TO I_REC2-YEAR,
 REC1-FY TO I_REC2-FY,
 REC1-ACCOUNT TO I_REC2-ACCOUNT,
 REC1-VER TO I_REC2-VER,
 REC1-VTYPE TO I_REC2-VTYPE,
 REC1-CLNT TO I_REC2-CLNT,
 REC1-S_SYS TO I_REC2-S_SYS,
 REC1-INDICATOR TO I_REC2-INDICATOR.
APPEND I_REC2.
CLEAR I_REC2.
ENDLOOP.
IF NOT I_REC2[] IS INITIAL.
 PERFORM DOWNLOAD .
 CLEAR I_REC2.
 REFRESH I_REC2.
 ELSE.
 WRITE : / ' no record exist due to unavailability of data'.
ENDIF.
ENDFORM. " LOCAL_DOWNLOAD
*& Form UNIX_DOWNLOAD
FORM UNIX_DOWNLOAD.
LOOP AT REC1.
REC1-CLNT = SY-MANDT.
REC1-S_SYS = SY-SYSID.
MOVE: REC1-BAL TO I_REC2-BAL,
 REC1-COAREA TO I_REC2-COAREA,
 REC1-CA TO I_REC2-CA,
 REC1-KTOPL TO I_REC2-CA,
 REC1-CCODE TO I_REC2-CCODE,
 REC1-CREDIT TO I_REC2-CREDIT,
 REC1-CURRENCY TO I_REC2-CURRENCY,
 REC1-CURTYPE TO I_REC2-CURTYPE,
 REC1-DEBIT TO I_REC2-DEBIT,
 REC1-YEAR TO I_REC2-YEAR,
 REC1-FY TO I_REC2-FY,
 REC1-ACCOUNT TO I_REC2-ACCOUNT,
 REC1-VER TO I_REC2-VER,
 REC1-VTYPE TO I_REC2-VTYPE,
 SY-MANDT TO I_REC2-CLNT,
 SY-SYSID TO I_REC2-S_SYS,
 REC1-INDICATOR TO I_REC2-INDICATOR.
APPEND I_REC2.
CLEAR I_REC2.
ENDLOOP.
IF NOT I_REC2[] IS INITIAL.
 PERFORM WRITE_TO_SERVER.
 CLEAR I_REC2.
 REFRESH I_REC2.
ELSE.
 WRITE : / ' no record exist due to unavailability of data'.
ENDIF.
ENDFORM. " UNIX_DOWNLOAD
*& Form HEADER_TEXT
 text *
--> p1 text
<-- p2 text
*form header_text.
concatenate c_bal c_ba c_ca c_cc c_credit c_currency c_curtype
 c_debit c_fisyear c_fisvar c_acct c_ver c_vtype c_indicator
 into t_strhd
 separated by c_comma.
append t_strhd.
*endform. " HEADER_TEXT
*& Form HEADER_TEXT1
 text *
*form header_text1.
concatenate c_bal c_ba c_ca c_cc c_credit c_currency c_curtype
 c_debit c_fisyear c_fisvar c_acct c_ver c_vtype c_indicator
 into t_strhd1
 separated by c_comma.
append t_strhd1.
transfer t_strhd1 to p_unfil.
*endform. " HEADER_TEXT1
*& Form COLLECT_DATA
 Collect Data *
FORM COLLECT_DATA.
SELECT * FROM GLT0 INTO TABLE REC3
 WHERE BUKRS IN COMPCODE
 AND RYEAR IN FISYEAR
 AND RPMAX IN FISCPER
 AND RACCT IN GLACC
 AND RTCUR IN CURRENCY.
SELECT KTOPL FROM SKA1
 INTO TABLE T_KTOPL
 FOR ALL ENTRIES IN REC3
 WHERE SAKNR = REC3-RACCT.
LOOP AT REC3 .
 select *
 from glt0
 into table t_temp
 where rldnr = rec-rldnr
 and rrcty = rec-rrcty
 and rvers = rec-rvers
 and bukrs = rec-bukrs
 and ryear = rec-ryear
 and racct = rec-racct
 and rbusa = rec-rbusa
 and rtcur <> 'ZAR'
 and rpmax = rec-rpmax.
if sy-subrc = 0.
 rec1-bal = '0.00'.
else.
rec1-bal = rec-hslvt.
endif.
*READ TABLE T_KTOPL WITH KEY SAKNR = REC-RACCT BINARY SEARCH.
MOVE T_KTOPL-KTOPL TO REC3-KTOPL.
CLEAR: CBALANCE, DBALANCE.
REC1-BAL = REC3-HSLVT.
IF REC3-DRCRK = 'S'.
IF REC3-HSLVT NE C_ZERO.
 YEAR = REC-RYEAR.
 PERIOD = '000'.
 CONCATENATE PERIOD C_DOT YEAR INTO FP.
 REC1-INDICATOR = REC-DRCRK.
 REC1-DEBIT = C_ZERO.
 REC1-CREDIT = C_ZERO.
 REC1-CCODE = REC-BUKRS.
 REC1-YEAR = FP.
 REC1-CURRENCY = REC-RTCUR.
 REC1-ACCOUNT = REC-RACCT.
 rec1-bal = rec-hslvt.
 dbalance = rec1-bal.
 REC1-CURTYPE = C_CTYPE.
 REC1-FY = C_FY.
 REC1-COAREA = REC-RBUSA.
 REC1-VER = REC-RVERS.
 REC1-VTYPE = C_CTYPE.
 REC1-CA = C_CHART.
 APPEND REC1.
 C = 0.
 PERFORM D.
ENDIF.
IF REC3-HSL01 NE C_ZERO.
 YEAR = REC3-RYEAR.
 PERIOD = '001'.
 CONCATENATE PERIOD C_DOT YEAR INTO FP.
 REC1-INDICATOR = REC3-DRCRK.
 REC1-DEBIT = REC3-HSL01 .
 REC1-CCODE = REC3-BUKRS.
 REC1-YEAR = FP.
 REC1-CURRENCY = REC3-RTCUR.
 REC1-ACCOUNT = REC3-RACCT.
 rec1-bal = REC3-hsl01 + dbalance.
 dbalance = rec1-bal.
 REC1-CURTYPE = C_CTYPE.
 REC1-FY = C_FY.
 REC1-COAREA = REC3-RBUSA.
 REC1-VER = REC3-RVERS.
 REC1-VTYPE = C_CTYPE.
 REC1-CA = C_CHART.
 REC1-KTOPL = REC3-KTOPL.
 APPEND REC1.
 C = 1.
 PERFORM D.
ENDIF.
IF REC3-HSL02 NE C_ZERO.
 REC1-DEBIT = REC3-HSL02.
 YEAR = REC3-RYEAR.
 PERIOD = '002'.
CONCATENATE PERIOD C_DOT YEAR INTO FP.
 REC1-INDICATOR = REC3-DRCRK.
 REC1-DEBIT = REC3-HSL02.
 REC1-CCODE = REC3-BUKRS.
 REC1-YEAR = FP.
 REC1-CURRENCY = REC3-RTCUR.
 REC1-ACCOUNT = REC3-RACCT.
rec1-bal = REC3-hsl02 + dbalance.
dbalance = rec1-bal.
 REC1-CURTYPE = C_CTYPE.
 REC1-FY = C_FY.
 REC1-COAREA = REC3-RBUSA.
 REC1-VER = REC3-RVERS.
 REC1-VTYPE = C_CTYPE.
 REC1-CA = C_CHART. "-BF7957-070503
 REC1-KTOPL = REC3-KTOPL. "+BF7957-070503
 APPEND REC1.
 C = 2.
PERFORM D.
ENDIF.
IF REC3-HSL03 NE C_ZERO.
 YEAR = REC3-RYEAR.
 PERIOD = '003'.
 CONCATENATE PERIOD C_DOT YEAR INTO FP.
 REC1-INDICATOR = REC3-DRCRK.
 REC1-DEBIT = REC3-HSL03.
 REC1-CCODE = REC3-BUKRS.
 REC1-YEAR = FP.
 REC1-CURRENCY = REC3-RTCUR.
 REC1-ACCOUNT = REC3-RACCT.
 rec1-bal = REC3-hsl03 + dbalance .
 dbalance = rec1-bal.
 REC1-CURTYPE = C_CTYPE.
 REC1-FY = C_FY.
 REC1-COAREA = REC3-RBUSA.
 REC1-VER = REC3-RVERS.
 REC1-VTYPE = C_CTYPE.
 REC1-CA = C_CHART. "-BF7957-070503
 REC1-KTOPL = REC3-KTOPL. "+BF7957-070503
 APPEND REC1.
 C = 3.
PERFORM D.
ENDIF.
IF REC3-HSL04 NE C_ZERO.
 REC1-DEBIT = REC3-HSL04.
 YEAR = REC3-RYEAR.
 PERIOD = '004'.
 CONCATENATE PERIOD C_DOT YEAR INTO FP.
 REC1-INDICATOR = REC3-DRCRK.
 REC1-DEBIT = REC3-HSL04.
 REC1-CCODE = REC3-BUKRS.
 REC1-YEAR = FP.
 REC1-CURRENCY = REC3-RTCUR.
 REC1-ACCOUNT = REC3-RACCT.
 rec1-bal = REC3-hsl04 + dbalance .
 REC1-CURTYPE = C_CTYPE.
 REC1-FY = C_FY.
 REC1-COAREA = REC3-RBUSA.
 REC1-VER = REC3-RVERS.
 REC1-VTYPE = C_CTYPE.
 REC1-CA = C_CHART. "-BF7957-070503
 REC1-KTOPL = REC3-KTOPL. "+BF7957-070503
 APPEND REC1.
 dbalance = rec1-bal.
 C = 4.
 PERFORM D.
ENDIF.
Thanks and Regards,
Ram

use logical database SDF, nodes ska1 and skc1c
A.

How to populate data into Dynamic Internal Table.

Hi Experts,
I had created one Dynamic Internal table and one static internal table.I want to move data from Static Internal table to Dynamic interal table.And aslo the number of coloum of these two tables are not same.
So please help me for solving this issue.
Thanks,
Seema.

Hi,
Check out this sample program for dynamictable report.
REPORT YMS_DYNAMICDEMO
 NO STANDARD PAGE HEADING
 MESSAGE-ID zcs_c2c_001.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
 <dyn_wa>,
 <dyn_field>.
data: dy_table type ref to data,
 dy_line type ref to data,
 xfc type lvc_s_fcat,
 ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
perform write_out.
form get_structure.
data : idetails type abap_compdescr_tab,
 xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
Get the structure of the table.
ref_table_des ?=
 cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
 clear xfc.
 xfc-fieldname = xdetails-name .
 xfc-datatype = xdetails-type_kind.
 xfc-intlen = xdetails-length.
 xfc-decimals = xdetails-decimals.
 append xfc to ifc.
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
 exporting
 it_fieldcatalog = ifc
 importing
 ep_table = dy_table.
assign dy_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
form get_data.
Select Data from table.
select * into table <dyn_table>
 from (p_table).
endform.
form write_out.
Write out data from table.
loop at <dyn_table> into <dyn_wa>.
 do.
 assign component sy-index
 of structure <dyn_wa> to <dyn_field>.
 if sy-subrc <> 0.
 exit.
 endif.
 if sy-index = 1.
 write:/ <dyn_field>.
 else.
 write: <dyn_field>.
 endif.
 enddo.
endloop.
endform.
Thanks,
Shankar

To add the multiline data into an internal table from TextEdit

Hello Experts,
I have one requirement that I have to use the TextEdit field. and put the values into an internal table.
can you help me. with some sample code.
Thanks in Advance
Kuldeep

The problem is solved by using the following code
DATA: data TYPE REF TO CL_HTMLB_TEXTEDIT.
Data itab1 type itab.
data ?= CL_HTMLB_MANAGER=>GET_DATA(
                                request = runtime->server->request
                                 name    = 'textEdit'
                                 id      = 'txt1'
data text type string.
IF data IS NOT INITIAL.
text = data->text.
ENDIF.
SPLIT text AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO
      TABLE itab1.
Kuldeep

Conversion of PDF file data into ABAP internal table

Hi all,
I am unable to convert the binary data into text format by using some function modules and classes .please find tthe function modules names and classes:
SCMS_BINARY_TO_TEXT,SCMS_BIN_TO_TEXT, CL_ABAP_CONV_IN_CE,CL_ABAP_CONV_OBJ. But these are not working as per my requirement.
My requirement is we need to upload PDF file (legecy file)which is saved under the PC into SAP and display the same PDF data into the adobe interactive form. For thise i have done coding by using above function modules and classes but i got the unwant on the adobe form i.e display lke "##############$$%%^^&&*((((()))%%%%%%###*^^&&***"
Thanks,
Ramana

I don't understand, the pdf is put into an internal table at
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF
the table is pdf and all info for the pdf is there already in a table?
if you continue the source code the only thing is that the table is combined with a file name and makes it happen that you get an actual file.
or do you want to have the pdf in a single field ?
or do you want to store the document on a server where the location is stored in an internal table ??
kind regards
arthur de smidt

Popualting data into dynamic internal table

Hi all,
 I am working on Dynamic internal tables.I have created the structure of internal table but i am unable to populate data into it.Though i have seen some of the forums but those didn't help me. please provide me the solution. Here is my code what i did.I have the data in itab and itab1.
My requirement is meinh fileds are dynamic.thie meinh and umren are two fileds in mvke table.for one record ihave to populate umren value for that particular meinh value.Pls help me.
mtart vkorg werks mtanr Meinh(kg) Meinh(gl)
fert 0353 0303 3231 Umren value Umren value
REPORT z123.
 T Y P E - P O O L S
TYPE-POOLS :slis,abap.
 T A B L E S
*Tables
TABLES: mara,marm,mvke,marc.
 F I E L D - S Y M B O L S
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
 <dyn_wa> ,
 <dyn_field>.
 I N T E R N A L T A B L E S
Internal Tables declaration for ALV GRID/LIST
DATA: ls_fieldcat TYPE slis_fieldcat_alv, "FIELD CATALOG LIST
 tb_uom_cat TYPE slis_t_fieldcat_alv, "FIELD CATALOG
 ls_fieldcat1 TYPE lvc_s_fcat,
 tb_dy_cat TYPE lvc_t_fcat, "FIELD CATALOG
 tb_outputcat TYPE slis_t_fieldcat_alv,
 tb_events TYPE slis_t_event,
 ref_grid TYPE REF TO cl_gui_alv_grid,
 t_events LIKE LINE OF tb_events.
DATA: BEGIN OF itab OCCURS 0,
 mtart LIKE mara-mtart,
 vkorg LIKE mvke-vkorg,
 werks LIKE marc-werks,
 matnr TYPE mara-matnr,
 END OF itab.
DATA: BEGIN OF itab1 OCCURS 0,
 matnr TYPE marm-matnr,
 umren TYPE marm-umren,
 meinh TYPE marm-meinh,
 END OF itab1.
 V A R I A B L E S
Global Variables
DATA: g_repid LIKE sy-repid. "Report ID
DATA: dy_table TYPE REF TO data,
 dy_line TYPE REF TO data.
 S E L E C T I O N S C R E E N
For User Input(Selection Criteria)
SELECTION-SCREEN BEGIN OF BLOCK b0 WITH FRAME TITLE text-001.
SELECT-OPTIONS :
s_mtart FOR mara-mtart OBLIGATORY, " Material type
s_vkorg FOR mvke-vkorg OBLIGATORY, " Sales Organization
s_plant FOR marc-werks, " Plant
s_meinh FOR marm-meinh. " Unit of Measure
SELECTION-SCREEN END OF BLOCK b0.
 I N I T I A L I Z A T I O N
INITIALIZATION.
Program ID
g_repid = sy-repid. " Prog ID
 A T S E L E C T I O N - S C R E E N
AT SELECTION-SCREEN.
Validate Material Type
PERFORM check_mtart.
Validate Sales Organization
PERFORM check_vkorg.
Validate Plant
PERFORM check_werks.
Validate Unit of Measure (UOM)
PERFORM check_meinh.
 S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
Get Data
PERFORM get_data.
FIELD CATALOG FOR ALV
PERFORM fill_field_catalog_uom USING tb_uom_cat.
FIELD CATALOG FOR CREATING DYNAMIC INTERNAL TABLE
PERFORM fill_field_catalog_dy USING tb_dy_cat.
CREATING DYNAMIC INTERNAL TABLE
PERFORM dy_tab_create.
 End of selection *
 F O R M S
*& Form CHECK_MTART
 Validate Material Type
FORM check_mtart .
Material Type
DATA :l_mtart LIKE t134-mtart.
CHECK NOT s_mtart IS INITIAL.
SELECT mtart UP TO 1 ROWS
 INTO l_mtart
 FROM t134
 WHERE mtart IN s_mtart.
ENDSELECT.
IF sy-subrc <> 0.
 MESSAGE e899(mm) WITH 'Invalid Material Type'(002).
ENDIF.
ENDFORM. " CHECK_MTART
*& Form CHECK_VKORG
 Validate Sales Organization
FORM check_vkorg .
Sales Oraganization
DATA :l_vkorg LIKE tvko-vkorg.
CHECK NOT s_vkorg IS INITIAL.
SELECT vkorg UP TO 1 ROWS
 INTO l_vkorg
 FROM tvko
 WHERE vkorg IN s_vkorg.
ENDSELECT.
IF sy-subrc <> 0.
 MESSAGE e899(mm) WITH 'Invalid Sales Organization'(003).
ENDIF.
ENDFORM. " CHECK_VKORG
*& Form CHECK_WERKS
 Validate Plant
FORM check_werks .
Plant
DATA :l_werks LIKE t001w-werks.
CHECK NOT s_plant IS INITIAL.
SELECT werks UP TO 1 ROWS
 INTO l_werks
 FROM t001w
 WHERE werks IN s_plant.
ENDSELECT.
IF sy-subrc <> 0.
 MESSAGE e899(mm) WITH 'Invalid Plant'(004).
ENDIF.
ENDFORM. " CHECK_WERKS
*& Form CHECK_MEINH
 Validate Unit of Measure (UOM)
FORM check_meinh .
Unit of Measure (UOM)
DATA :l_meinh LIKE t006-msehi.
CHECK NOT s_meinh IS INITIAL.
SELECT msehi UP TO 1 ROWS
 INTO l_meinh
 FROM t006
 WHERE msehi IN s_meinh.
ENDSELECT.
IF sy-subrc <> 0.
 MESSAGE e899(mm) WITH 'Invalid Unit of Measure'(005).
ENDIF.
ENDFORM. " CHECK_MEINH
*& Form FILL_FIELD_CATALOG_UOM
 text
 FIELD CATALOG FOR ALV
FORM fill_field_catalog_uom USING l_fieldcat TYPE slis_t_fieldcat_alv.
DATA: BEGIN OF l_itab OCCURS 0,
 meinh TYPE marm-meinh,
 END OF l_itab.
DATA: l_count TYPE i.
DATA: l_fieldcat_col_pos TYPE i.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MTART'.
ls_fieldcat-key = ''.
ls_fieldcat-col_pos = 1.
ls_fieldcat-ref_fieldname = 'MTART'.
ls_fieldcat-ref_tabname = 'MARA'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'VKORG'.
ls_fieldcat-key = ''.
ls_fieldcat-col_pos = 2.
ls_fieldcat-ref_fieldname = 'VKORG'.
ls_fieldcat-ref_tabname = 'MVKE'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-key = ''.
ls_fieldcat-col_pos = 3.
ls_fieldcat-ref_fieldname = 'WERKS'.
ls_fieldcat-ref_tabname = 'MARC'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-key = 'x'.
ls_fieldcat-col_pos = 4.
ls_fieldcat-ref_fieldname = 'MATNR'.
ls_fieldcat-ref_tabname = 'MARA'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
l_fieldcat_col_pos = 5.
Getting the UOM as per user selection
SELECT msehi FROM t006
 INTO TABLE l_itab
 WHERE msehi IN s_meinh.
LOOP AT l_itab.
 ls_fieldcat-fieldname = l_itab-meinh.
 ls_fieldcat-key = ''.
 ls_fieldcat-col_pos = l_fieldcat_col_pos.
 ls_fieldcat-ref_fieldname = 'MSEHI'.
 ls_fieldcat-ref_tabname = 'T006'.
 APPEND ls_fieldcat TO l_fieldcat.
 CLEAR ls_fieldcat.
 l_fieldcat_col_pos = l_fieldcat_col_pos + 1.
ENDLOOP.
ENDFORM. " FILL_FIELD_CATALOG_UOM
*& Form DISPLAY_DATA
 text
--> p1 text
<-- p2 text
FORM display_data .
ENDFORM. " DISPLAY_DATAENDFORM. " FILL_FIELD_CATALOG_UOM
*& Form DY_TAB_CREATE
 text
--> p1 text
<-- p2 text
FORM dy_tab_create .
CREATE DYNAMIC INTERNAL TABLE AND ASSIGN TO FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = tb_dy_cat
 IMPORTING
 ep_table = dy_table.
ASSIGN dy_table->* TO <dyn_table>.
*CREATE DYNAMIC WORK AREA AND AASIGN TO FS
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
ENDFORM. " DY_TAB_CREATE
*& Form FILL_FIELD_CATALOG_DY
 text
 FIELD CATALOG FOR CREATING A DYNAMIC TABLE
FORM fill_field_catalog_dy USING l_fieldcat TYPE lvc_t_fcat.
DATA: BEGIN OF l_itab OCCURS 0,
 meinh TYPE marm-meinh,
 END OF l_itab.
DATA: l_count TYPE i.
DATA: l_fieldcat_col_pos TYPE i.
DATA: l_umren TYPE string.
DATA: l_var TYPE string.
CLEAR ls_fieldcat.
ls_fieldcat1-fieldname = 'MTART'.
ls_fieldcat1-key = ''.
ls_fieldcat1-col_pos = 1.
ls_fieldcat1-datatype = 'char'.
ls_fieldcat1-intlen = 4.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
ls_fieldcat1-fieldname = 'VKORG'.
ls_fieldcat1-key = ''.
ls_fieldcat1-col_pos = 2.
ls_fieldcat1-datatype = 'char'.
ls_fieldcat1-intlen = 4.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
ls_fieldcat1-fieldname = 'WERKS'.
ls_fieldcat1-key = ''.
ls_fieldcat1-col_pos = 3.
ls_fieldcat1-datatype = 'char'.
ls_fieldcat1-intlen = 4.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
ls_fieldcat1-fieldname = 'MATNR'.
ls_fieldcat1-key = 'x'.
ls_fieldcat1-col_pos = 4.
ls_fieldcat1-datatype = 'char'.
ls_fieldcat1-intlen = 18.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
l_fieldcat_col_pos = 5.
Getting the UOM as per user selection
SELECT msehi FROM t006
 INTO TABLE l_itab
 WHERE msehi IN s_meinh.
SORT l_itab ASCENDING.
DESCRIBE TABLE l_itab LINES l_count.
LOOP AT l_itab.
 ls_fieldcat1-fieldname = l_itab-meinh.
 ls_fieldcat1-key = ''.
 ls_fieldcat1-col_pos = l_fieldcat_col_pos.
 ls_fieldcat1-datatype = 'dec'.
 ls_fieldcat1-intlen = 5.
 APPEND ls_fieldcat1 TO l_fieldcat.
 CLEAR ls_fieldcat1.
 l_fieldcat_col_pos = l_fieldcat_col_pos + 1.
ENDLOOP.
ENDFORM. " FILL_FIELD_CATALOG_DY
*& Form GET_DATA
 text
--> p1 text
<-- p2 text
FORM get_data .
SELECT
amtart bvkorg cwerks amatnr
INTO TABLE itab
FROM mara AS a
JOIN mvke AS b ON bmatnr = amatnr
JOIN marc AS c ON cmatnr = bmatnr
JOIN marm AS d ON dmatnr = cmatnr
WHERE a~mtart IN s_mtart
 AND b~vkorg IN s_vkorg
 AND c~werks IN s_plant.
SORT itab ASCENDING.
DELETE ADJACENT DUPLICATES FROM itab.
SELECT matnr umren meinh FROM marm
APPENDING TABLE itab1
FOR ALL ENTRIES IN itab
WHERE matnr = itab-matnr
AND meinh IN s_meinh .
ENDFORM. " GET_DATA

can you check this for creation of dynamic table
******DATA DECLARATION*****************************
FIELD-SYMBOLS : <it_final> TYPE STANDARD TABLE,
 <wa_final> TYPE ANY,
 <w_field> TYPE ANY.
***DYNAMIC CREATION OF FIELDCATALOG****************
*FIRST 2 FIELDS FIELDS FIELD1 AND FIELD2 ARE CONSTANT, FIELDS OBTAINED IN THE LOOP ENDLOOP ARE DYNAMIC,
*LIKEWISE DYNAMIC FIELDCATALOG IS CREATED
wa_fieldcatalog-fieldname = 'FIELD1'.
wa_fieldcatalog-ref_table = 'E070'.
wa_fieldcatalog-outputlen = '13'.
wa_fieldcatalog-reptext = 'Created On'.
wa_fieldcatalog-seltext = 'Created On'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname = 'FIELD1'.
wa_fieldcatalog-ref_table = 'E070'.
wa_fieldcatalog-outputlen = '13'.
wa_fieldcatalog-reptext = 'Created On'.
wa_fieldcatalog-seltext = 'Created On'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
LOOP AT it_mandt WHERE mandt IN s_mandt.
 CONCATENATE 'CLNT' it_mandt INTO wa_fieldcatalog-fieldname.
 wa_fieldcatalog-inttype = 'NUMC'.
 wa_fieldcatalog-outputlen = '14'.
 wa_fieldcatalog-reptext = it_mandt.
 wa_fieldcatalog-seltext = it_mandt.
 APPEND wa_fieldcatalog TO it_fieldcatalog.
 CLEAR :wa_fieldcatalog ,it_mandt.
ENDLOOP.
********CREATE DYNAMIC TABLE************************
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fieldcatalog
 IMPORTING
 ep_table = new_table
 EXCEPTIONS
 generate_subpool_dir_full = 1
 OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ASSIGN new_table->* TO <it_final>.
*********CREATE WORK AREA****************************
CREATE DATA new_line LIKE LINE OF <it_final>.
ASSIGN new_line->* TO <wa_final>.
*********INSERTTING WORK AREAR TO INTERNAL TABLE******
 INSERT <wa_final> INTO TABLE <it_final>.
*******POPULATING DATA*******************************
LOOP.
 ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <wa_final> TO <w_field>.
 <w_field> = '12345'.
 ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_final> TO <w_field>.
 <w_field> = '21453DD'.
 FIELD1 AND FIELD2 ARE COMPONENTS OF FIELDCATALOG.
ENDLOOP.
ENDLOOP.

Selecting values into same internal table from 2 differrnt select statement

Hi Friends,
code :
types :
   begin of ty_bsad,
     augbl type bsad-augbl,
end of ty_bsad.
begin of ty_bsad1,
     augbl type bsad-augbl,
     belnr type bsad-belnr,
end of ty_bsad1.
select augbl
           from bsad
          into table it_bsad
          where belnr = l_vbeln and
                   bukrs = l_bukrs and
                  kunnr = l_kunrg.
       if sy-subrc = 0 .
           select belnr
                     into table lt_bsad1
                     from bsad
                    for all entries in lt_bsad
                   where augbl = lt_bsad-augbl and
                            kunnr = l_kunnr and
                            burks = l_bukrs and
                            blart   = 'xy'.
now my requiremnt is i need to get both the augbl and belnr in single internal table but not in differnrnt internal table.
how can i get it.
Regards,
Priyanka.
Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 10:53 AM

HI.
No Need to create two internal table because your feyching values from same table BSAD with diffrent where condition.try this code.it s work.
select augbl
from bsad
into table it_bsad
where belnr = l_vbeln and
bukrs = l_bukrs and
kunnr = l_kunrg and
blart = 'xy'.
else Refer this code.
LOOP AT it_bill_data INTO wa_bill_data.
    MOVE-CORRESPONDING wa_bill_data TO wa_final_data.
    READ TABLE it_material_data INTO wa_material_data
                                WITH KEY matnr = wa_bill_data-matnr.
    IF sy-subrc = 0.
      wa_final_data-meins_mara = wa_material_data-meins.
    ENDIF.
    APPEND wa_final_data TO it_final_data.
ENDLOOP.
Regards.
Jay
Edited by: Jay on Jan 8, 2009 2:53 PM
Edited by: Jay on Jan 8, 2009 2:57 PM
Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 10:56 AM

Inserting data into dynamic internal tables

Hello everyone, i need some suggestions on the following problem:
I have created a dynamic table that consist of storage locations(SL) belonging to a plant. Each record in the internal table would need to display all the SL on the same line. I have succesfully created it and displayed it on an ALV, the problem now is how to insert data for the dynamically created storage locations:
EXAMPLE: Created dynamic itab
colA | colB | SL1 | SL2 | ... | SLn | colC | <--header
data | data | 100 | 120 | ... | 200 | data | <--record
I would like to insert data from the fields of another itab into SL1 to SLn. How can i go about doing it?
Data from ColA to ColC has been filled through:
loop at itab into w_itab.
move-corresponding w_itab to <dyn_tab>.
endloop.
I cannot do the same to the SLs as the fields is dynamically created during runtime and the fieldname is different from the data that i am to insert in into.
Any ideas?

Hi,
I have the following code in my BADI:
ct_value_list is defined in the parameters of the method as a type standard table.
Create values list reference
CREATE DATA lv_value_list_ref LIKE LINE OF ct_value_list.
ASSIGN lv_value_list_ref->* TO <lfs_value_list>.
IF CT_VALUE_LIST IS INITIAL.
 lv_tabix = sy-tabix.
 IF NOT LT_DATA[] IS INITIAL.
 LOOP AT lt_data assigning <lfs_data>.
 assign <lfs_data> to <lfs_value_list>.
 assign <lfs_value_list> to <lv_value_list>.
 ASSIGN COMPONENT lc_prvar OF STRUCTURE <lfs_value_list>
 TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
Get the material id
 READ TABLE it_matkey_tab ASSIGNING <lfs_matkey>
 WITH KEY matnr = <lfs_attribute>.
 IF sy-subrc = 0.
 lv_matid = <lfs_matkey>-matid.
 ENDIF.
 ENDIF.
 ASSIGN COMPONENT lc_mktgr OF STRUCTURE <lfs_value_list>
 TO <lfs_attribute>.
 IF <lfs_value_list> IS ASSIGNED.
 READ TABLE it_loc ASSIGNING <lfs_loc>
 WITH KEY locno = <lfs_attribute>.
 IF sy-subrc = 0.
 lv_locid = <lfs_loc>-locid.
 ENDIF.
 READ TABLE it_matloc ASSIGNING <lfs_matloc_int>
 WITH KEY matid = lv_matid
 locid = lv_locid.
 if sy-subrc = 0.
 MATLOC: Assignment of Values - START
 ASSIGN COMPONENT 'MATLOCID'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-matlocid.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 INSERT <lfs_matloc_int> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'PLANNER_SNP'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-planner_snp.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'AT101'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-at101.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'AT102'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-at102.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'AT103'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-at103.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'AT104'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-at104.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'AT105'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-at105.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 endif.
 ENDIF.
 ASSIGN COMPONENT 'PRVAR'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-prvar.
 INSERT <lfs_value_list> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'PARPR'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-parpr.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'VARID'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-varid.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'VARCT'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-varct.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'VARTX'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-vartx.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'DMOAP'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-dmoap.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'PRDID'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-prdid.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'BRFAM'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-brfam.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MATKL'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-matkl.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'BRDIF'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-brdif.
 INSERT <lfs_attribute> INTO TABLE ct_value_list.
 ENDIF.
 ASSIGN COMPONENT 'MEIND'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-meind.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MKLEN'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-mklen.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'PCKTY'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-pckty.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'ITPCK'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-itpck.
 INSERT <lfs_attribute> INTO TABLE ct_value_list.
 ENDIF.
 ASSIGN COMPONENT 'PMEIN'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-pmein.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MKTHK'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-mkthk.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'FLIND'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-flind.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'EDTID'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-edtid.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'BNDTY'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-bndty.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'ITBND'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-itbnd.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'ITCSE'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-itcse.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'TPCOL'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-tpcol.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'SPFLV'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-spflv.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'PRSHP'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-prshp.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MKTGR'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-mktgr.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'SUBMK'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-submk.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'BOMHD'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-bomhd.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'BRDSC'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-brdsc.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MKSTR'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-mkstr.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'EDDSC'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-eddsc.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'EDCAT'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-edcat.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'CCIND'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-ccind.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'CGSTY'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-cgsty.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'FLTTY'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-fltty.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'CPIND'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-cpind.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MBIND'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-mbind.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'USPRP'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-usprp.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'EDDET'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-eddet.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'BRGEW'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-brgew.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'NTGEW'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-ntgew.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'GEWEI'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-gewei.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'VOLUM'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-volum.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'VOLEH'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-voleh.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'DMOAPP1'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-dmoapp1.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MAKTX'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-maktx.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'RPLVL'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-rplvl.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ENDLOOP.
 ENDIF.
ENDIF.
I get a shortdump in the code for the above code. There are diff types of inserts that I am trying to do and each one gives a short dump.
Looking forward to your inputs.
Your program is not applicable in my case as I have ct_value_list passed as a changing parameter of type standard table in my APO BADI.
cheers
Aveek

Field-Symbols: How to retrieve data into an internal table from FS

Hello All,
I am working on field symbols.I have declared the field symbols as shown.
FIELD-SYMBOLS: <gt_pos_data> TYPE table,
 <wa_pos_data> like <gt_pos_data>.
Data: Begin of itab occurs 0,
 field1(5) type c,
 field2(10)_type c,
 end of itab.
The FS <gt_pos_data> has 100 fields but I need to move only two fields from this FS to my internal table itab.I am doing the following.
loop at <gt_pos_data> assigning <wa_pos_data>.
itab-field1 = <wa_pos_data>-field1.
itab-field2 = <wa_pos_data>-field2.
append itab.
clear itab.
endloop.
But it is giving me an error saying "<wa_pos_data> is a table without header line and therefore has no componet FIELD1".How to achieve this requirement?
Thanks in advance
Sandeep

<wa_pos_data> should be defined LIKE LINE OF <gt_pos_data>, but it will still have no structure, so you need to assign a field symbol to the component as well.
FIELD-SYMBOLS: <gt_pos_data> TYPE table,
 <wa_pos_data> like LINE OF <gt_pos_data>,
 <field> type any.
Data: Begin of itab occurs 0,
field1(5) type c,
field2(10)_type c,
end of itab.
loop at <gt_pos_data> assigning <wa_pos_data>.
assign componet 'FIELD1' of structure <wa_pos_data> to <field>.
if sy-subrc = 0.
itab-field1 = <field>.
endif.
assign componet 'FIELD2' of structure <wa_pos_data> to <field>.
if sy-subrc = 0.
itab-field2 = <field>.
endif.
append itab.
clear itab.
endloop.
Regards,
Rich Heilman

Select data into deep internal table

Similar Messages

Maybe you are looking for