Select Object tool not working

Newbie here. I used the Select Object tool once on a document.
Clicked on the tool on the toolbar.
Clicked once on the page.
A blue box appeared.
Then I double-clocked to edit.
Well. Since then, no amount of clicking is getting the blue box to appear.
Can anyone tell me what I'm doing wrong?
I'm trying to remove one line of text. Any better way, perhaps?
Thanks.
Acro 8

Are you trying to select graphics, text, or something else. If you select graphics, then typically a double click with bring up the default editor to edit that graphic. It may be that you do not have the editor specified or on your system.
For text, use the text touchup tool.

Similar Messages

Why select query is not working?

CREATE OR REPLACE TYPE prod_type AS OBJECT (
pid INT,
pprice NUMBER,
MEMBER PROCEDURE display(pid IN NUMBER));
create table prod of prod_type (pid primary key);
CREATE OR REPLACE TYPE deal_type UNDER prod_type (
ctr NUMBER,
OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
insert into prod values(deal_type(101, 4, 1));
insert into prod values(deal_type(102, 5, 0));
------below given select query is NOT WORKING ---------
select ctr from prod p where p.pid=101;
Thanks,
-Nid

------below given select query is NOT WORKINGWondering how you inserted data ...
SQL> CREATE OR REPLACE TYPE prod_type AS OBJECT (
2 pid INT,
3 pprice NUMBER,
4 MEMBER PROCEDURE display(pid IN NUMBER));
5 /
Type created.
SQL>
SQL> create table prod of prod_type (pid primary key);
Table created.
SQL>
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
4 );
5 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
4/1      PLS-00103: Encountered the symbol ")" when expecting one of the
         following:
         , not pragma <an identifier>
         <a double-quoted delimited-identifier> final instantiable
         current order overriding static member constructor map
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER));
4 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
1/1      PLS-00590: attempting to create a subtype UNDER a FINAL type
SQL>You made an attempt to create a subtype UNDER a FINAL type - that the reason why can not work ...
Avoid deriving a subtype from this FINAL type.
HTH

Multi-select LOV does not work in forms

the multi select LOV does not work in the form.
the LOV works individually but in the form it does not work. it does not allow multiple selection from the list.
is there a workaround for this or is this a bug ...?
any ideas ...?
thanx a lot.
null

Right, we cannot store more than one value in a single column in a table :), we were getting a lot of requests to support multiple select LOVs but requirements were contradictory if not mutually exclusive.
The only sense it makes is when used together with user-defined object types (nested tables for example) but the current [application building]infrastructure we have does not support this. However, we are looking into this and this feature maybe implemented in a future release.

Converting WordPerfect to PDF with desktop printer tool: Not working

I have been a monthly subscriber to Adobe CreatePDF for many years! I work mainly with Correl WordPerfect, but with the change to the Pack version it is not supported. I downloaded the desktop printer tool; it is installed. However, when I follow instructions and print, I get nothing. Where does the PDF go? What can I do? Please help! I cannot continue to pay monthly if I don't get service.

Thank you very much. I have uninstall adobe desktop printer tool and my wordperfect. Next step is follow your suggestions but I am no computer anything, lol. 1. How do I know if I have a win 7 sp1? I have win 7 that much I know. 2. Where can download the hotfix? 3. With adobe createpdf, I didn't need adobe ps printer setup, I don't have a laser printer at home, I have an hp inkjet printer.
Please help again and soon, :).
Date: Tue, 7 Jan 2014 11:52:08 -0800
From: [email protected]
To: [email protected]
Subject: Converting WordPerfect to PDF with desktop printer tool: Not working
    Re: Converting WordPerfect to PDF with desktop printer tool: Not working
    created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
Please do following
(A). If your system is Win 7 SP1 then install a hot fix to correct inetpp.dll version at C:\Windows\System32 folder.After installing the hot fix version will be 6.1.7601.21819 from 6.1.7601.17514.
Note please uninstall CreatePDF Desktop printer then reinstall after applying the hot fix
(B). If you have not installed Adobe Postscript driver yet then please install one as below:
How to Install PS printer:
1. Open Start menu > Devices and Printer ( or from control panel) and select "Add a printer"
2. Select "Add a local printer"
3. Select "Use an existing port: LPT1: (Printer port)
4. Select any company and any PS printer with Adobe PS printer driver(not clone) such as Xerox and Xerox Phaser 6120PS
Adobe PS driver files:
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532123/450-202/PagesfromHowToInstall_PS_PrinterDriver_onWin7.jpg
(C) Go to the printer configure port and verify your Adobe ID and password
1. Goto Start> Devices and Printers > Adobe CreatePDF Desktop Printer
2. Click right mouse to open “Printer properties”.
3. Select “Ports” tab
4. Select ”Internet Port: Adobe CreatePDF Desktop printer”
5. Click “Configure Port…” button at the bottom
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532115/410-417/IPP_Scr eenshot.png
When printing to PDF you will see below and an email is delivered to your email inbox. The converted PDF file will be stored at https//files.acrobat.com.
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532116/395-199/IPP_Scr eenshot_Queue.png
Thank you
Hisami
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5989811#5989811
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5989811#5989811
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5989811#5989811. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

CS5 Refine Edges tool not working how its suppose to

Hello everyone - well I like the title says refine edges tool not working right -
I open an image in photoshop - make a quick selection of a part of the image and then go into refine edges - Click on smart radious and when I use the brush to get a better selection that part becomes transparent - I tried seaching everywhere for an answer but noone seems to know
Thank you

Could you please post a screenshot with the pertinent Panels visible?
The videos you might have seen might simply be using images that lend themselves to the task better than your image.

Authorization Object is not working when report is modified.

Hi BW Guru's
We have Company Code as Authorization Object .and we have 3 company Codes (xxxx,yyyy,zzzz).where the users under Company code xxxx are not supposed to view company code yyyy,zzzz data etc.
I modified an existing Report and transported to production.But the Authorization Object is not working for that report.The Report is defaultly displaying all the company codes data(xxxx,yyyy) for all the users.But for the other reports its(company code ) is working fine.
What could be the problem?Is theproblem in transporting the objects.But i transported all the objects inluding auhorization object.
Please send me the solution as it is very much urgent.
The solution will be def. awarded with full points.
Regards
Sanjay

hi Sanjay,
please don't post the same question again, check and response back from your previous thread
Re: Authorization Object is not working when report is Modified.
hope this helps.
would be nice if you reward for helpful answers to all of your previous postings, e.g
docs related to RRI

Select() function is not working properly in solaris 10.

Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.
Thanks a lot.
Regards,
Srikanth.

haisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
    9      sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
    tv_sec = -4198732
    tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul

Creative cloud photoshop blur tool not work as it should be

creative cloud photoshop blur tool not work as it should be !
I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
at least it not bluring enough to see any major changes.
the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
(note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
just need advise not to share system specs.
and thats what this forums board is for getting advice and read what others say about the issue at hand.
it's not to post or share system specs !!!
so with that out of the way I need advice only please ?

Hi,
It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
If you zoom to 100% do you see any change when using the blur tool?
What are the pixel dimensions of the image?
(Image>Image Size)
If you try a small image, does the blur tool work?
What about when you use the mouse instead of your tablet?
Can you at least tell us what operating system and version of photoshop your using?

Select query is not working in BDC Program

Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........

If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
    where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
    where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
    FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond

Select Object Tool Adobe Pro 9.0

Can someone please help me. My "Select Object Tool" under Tools, Advance Editing is greyed out. Does any one know how to activate it?
Thank you in advance
[email protected]

Are there any security settings on the document?

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
-CharlieH23

Copy and paste only this area, you may have to scroll down.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 6019 MB
Free memory: 3360 MB
Memory available to Photoshop: 5227 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2112 MB
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4000
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
Driver Version: 10.18.10.3958
Driver Date: 20140930000000.000000-000
Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2112 MB

Extension in Select-Options is not working

Hi,
The extension of select-options is not working for the following statement........
SELECTION-SCREEN: BEGIN OF BLOCK sel WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_tp_no FOR e070-trkorr.
SELECTION-SCREEN: END OF BLOCK sel.
Please Help.......
Thanks,
Sheel

SELECTION-SCREEN: BEGIN OF BLOCK sel WITH FRAME TITLE text-001.
SELECTION-SCREEN: END OF BLOCK sel.
Remove the colan ':' from ur code after SELECTION-SCREEN
write it as
SELECTION-SCREEN BEGIN OF BLOCK sel WITH FRAME TITLE text-001.
SELECTION-SCREEN END OF BLOCK sel.

Select button will not work

My 2gb nano's select button will suddenly not work. The rest of the clickwheel and buttons work find, but not the center select button.
I restored it to original settings. Then after it restarts, you have to select a language. The select button would still not work, but then I slid the "hold" button back and forth and the select button worked to allow me to chose a language. But at the next screen of options (Music/Photos/Extras, etc.) the select button will again not work. Sliding the hold button back and forth doesn't work. I cannot do a menu+select reset because I can't get the select button to respond.
I have made sure that I have the most updated softward for the nano.
Any suggestions?

My select button has not worked for a loong time.. It will occasionally work if I press for long enough or hard enough.. but not very often. This seems to be a common enough problem so there should be a way to fix it..I hope..

Select list pagination not working for big tables

Hi,
i am trying to view a table with large amount of data using tabular form. the pagination using select list is not working in this page. i have selected select list kind of pagination but it is showing "row range 1-15 16-30(with set pagination)' type of pagination. when i lowered the amount of data in the table the pagination type will automatically change to select list pagination. could you please tell me why this happens and any possible work around if any.
Thanks,
Jo

Hi Jo,
I don't know what you call a large amount of records, but the effect you describe might be intentional by apex.
The select list pagination would generate a selection tag with (number of records in table/15) options in your page HTML.
Although there isn't a hard limit to the number of options a select list can have there certainly is a limit to what your browser/pc can render.
Think about it
Let's say you table contains a million rows. this would result to a select list with 66666 options. Which your browser won't handle :)
I very possible the apex team resolved this by simply reverting to row range pagination when the number of select options would grow to large.
Geert

SELECT DISTINCT does not work - Another Problem!

Dear All
Previous Post
I just posted a thread, which has been answered by an expert. It's here:
SELECT DISTINCT does not work. Why?
My original problem was that the Query returned duplicate records, and SELECT DISTINCT did not work.
The solution was to change this select:
T0.[U_SupInv]      AS 'Link'
... to this:
CAST(T0.[U_SupInv] as nvarchar(100))      AS 'Link'
The amended Query worked.
New Problem
I just discovered that resolving the problem created a new one.
The field U_SupInv (Link) is in fact a UDF.
I created it so that all Suppliers' Invoices could be Scanned to pdf files, and these pdf could be linked
to the respective AP Invoice.
Originally, when I clicked 'Link' in my Query results, the pdf scan pops up.
When the Query is amended by adding CAST, the link becomes dead.
Help
Could anyone tell me how I can make SELECT DISTINCT work, as well keeping the LINKS live?
The main purpose of my Query is to help users view the pdf scans by clicking on the links.
Thanks
Leon Lai
Here's my Original Query
SELECT
T0.[UpdateDate] AS 'Update Dt',
T0.[TaxDate] AS 'Doc Dt',
CASE T5.[TransType]
     WHEN '18' THEN 'PU ' + CONVERT(VARCHAR(6), T0.[DocNum])
     WHEN '19' THEN 'PC ' + CONVERT(VARCHAR(6), T0.[DocNum])
END 'SAP Ref.',
T1.[ImportLog]     AS 'Ship #',
T0.[CardCode] + '' AS 'Supplier #',
T0.[CardName]      AS 'Supplier Name',
T0.[DocTotal]      AS 'Rs',
T1.[BlockNum]      AS 'Reqn #',
T0.[DocNum]        AS 'Doc No',
T0.[U_SupInv]      AS 'Link'
FROM klship.[dbo].[OPCH] T0
INNER JOIN klship.[dbo].[PCH1] T1 ON T0.[DocEntry] = T1.[DocEntry]
INNER JOIN klship.[dbo].[OJDT] T5 ON T0.[TransID] = T5.[TransID]
WHERE
(T0.[UpdateDate] >= '[%2]' AND
T0.[UpdateDate] <= '[%3]' AND
T0.[U_SupInv] IS NULL)
OR
(T0.[UpdateDate] >= '[%4]' AND
T0.[UpdateDate] <= '[%5]' AND
T0.[U_SupInv] IS NOT NULL)
FOR BROWSE

Dear István Korös,
Thanks a lot for your answer.
I will test your suggestion tomorrow, as it's night and I am returning home now.
However, I do not think it will suit my requirements for the foll reasons:
- I worked hard to get rid of the need to enter anything in the @Scan2 field.
- This UDF was created solely as a text of instruction for my staff.
   Unfortunately I had to fill in something to make the Query work.
- The problem is that if the user forgets to click the drop-down arrow and leaves @Scan2
   blank, the query does not work.
- With the help of another expert, I succeeded in ignoring @Scan2 altogether.
- I posted only a simplified version of my Query on the forum, without the codes relating to eliminating the
need to enter something in @Scan2, so you may not be aware of my requirement.
- I hope you understand my reluctance. But I will try your suggestion nevertheless.
My Suggestion
I think using PCH1.VISORDER may be the solution.
If we select only those rows where visorder = 0, then
   - there will be no duplication
   - I need not use SELECT DISTINCT
   - All my LINKS to pdf files will be live because I need not use CAST
   - I may retain that part of my Query which permits ignoring @Scan2 altogether.
- A Dream!-
The problem is that I don't know how and where to place that VISORDER.
If you think I may be right, could you help me along that line?
Best Regards
Leon Lai

Select Object tool not working

Similar Messages

Maybe you are looking for