Selectboolean Checkbox value on Page load

Hi,
My requirement is : I have a Selectbooleancheckbox on a jspx page and I want to display Selectbooleancheckbox[b] "checked" when I run the jspx page...what should I do for this?Should I write some code in the getter method of Selectbooleancheckbox?If yes ,then what is the code?
Please reply ASAP.
Thanks,
Shantala.

Hey Mike,
The best way to do this is to use AJAX . I am not sure if the other item you are referencing is an item on the same page or an item from a previous page. The only differenceis that is the that item is on the same page, then you will need few more AJAX code ,to trigger the value of that field ( something like OnItemChange....).
However, if it is an item on a prvious (other) page, then all what you need to do is to add AJAX code to your page ( On Page Load) that simply preset the checklist checked values based on the passed item value.
Hope this helps,
Sam K

Similar Messages

Retain Values on Page load

Hello,
I am using Application Express 4.1.0.00.3.
I have a page load process- On Load Before header- which loads the values in the page items if :P4_ID is not null. I give the condition as :P4_ID IS NOT NULL : All works fine.
But I don't want this process to be executed if somebody presses on Upload1 and Upload2 buttons on the same page. So I give this condition under PL/SQL expression :
:P4_ID IS NOT NULL AND :REQUEST != 'UPLOAD1' AND :REQUEST != 'UPLOAD2'
--It doesn't load any values at all.
I tried with this syntax :
:P4_ID IS NOT NULL AND :REQUEST < > 'UPLOAD1' AND :REQUEST< > 'UPLOAD2'
(I have less than and greater than sign in between :REQUEST and UPLOAD1 . Similar way with UPLOAD2. Not sure why it is not displaying here. So editing the message )
Any idea how the condition should be written so that the process runs when the P4_ID is not null and no UPLOAD1 or UPLOAD2 buttons are pressed.
Regards,
Archana
Edited by: archana2 on Aug 9, 2012 6:32 PM
Edited by: archana2 on Aug 9, 2012 6:33 PM

Joe,
Thank you for the reply.
I have following fields on the page : P4_ID, P4_Name, P4_details , P4_state
Buttons : Upload1, Upload2, Submit_Record
If I am editing the record, P4_ID has a value :say eg : 1234, and on load I am loading values into these fields - P4_ID, P4_Name, P4_details , P4_state - from the table
This is the scenario where I have problem :
I edit the record, change the value of P4_details -- Press the button :Upload1 - Page gets submitted.
Now P4_details has a new value but because of the page load process , it again loads the values from the table. Newly entered value is lost.
I want the final Submission into the table to happen only when 'Submit_Record' button is pressed. But I want to retain newly entered values after 'Upload1' and 'Upload2' button press.
So , the condition is -run the process only when P4_ID is not null and button pressed is not UPLOAD1 and button pressed id not Upload2.
Not sure why my condition given is not working. Any problem in the syntax or anything else i need to change ?
Regards,
Archana

Skillbuilders Super LOV - map values on page load?

Hi,
I'm passing an ID from one page into a SuperLOV item on another.
Is there any way to make it perform the defined column mappings immediately to populate the other page items as if the ID had been selected manually?
Regards
Mark

Execute javascript on load:
$('#P53_COMPROD_ID').apex_super_lov('setValuesByReturn', $('#P53_COMPROD_ID_HIDDENVALUE').val());Is what i usually do. Second parameter is the return item value.
>
The getValuesByReturn and setValuesByReturn methods can be used to programmatically fetch return values and set the item using the return values. getValuesByReturn will return a JSON object with the results from the fetch. setValuesByReturn goes a step further using the return values to set the display and return values for the item. Example(s):
$('#P1_ITEM_NAME').apex_super_lov('getValuesByReturn', '101');
$('#P1_ITEM_NAME').apex_super_lov('setValuesByReturn', '999');

Dependent field not available on page load

I have a form on my website to that uses java script to map dependent values. If I set the first value on page load, the values in the second field aren't available. If I cycle the first field, the scripting runs and the dependent options are available.
The dropdowns work when the first is pre-selected in IE and Safari, this is causing problems for our Firefox users.

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

Populate LOV on page load

Hi,
I have a requirement that when the OA page is first time invoked, there is an Account ID request parameter that will be passed. I need to set the Id in LOV so that it will display the value on page load.
Example: AccountID=123 is passed as request param. Then LOV should display "Account123" on page load. Account123 is display value and 123 is key value.
Thanks,
Bhavnesh.
Edited by: bhavnesh_p on Feb 25, 2009 3:49 PM

Hi
u can do in this way in processRequest method
String Account_ID =(String) pageContext.getParameter("Account ID ");
OAMessageLOVInputBean mtiBean = (OAMessageTextInputBean)table.findIndexedChildRecursive("LovField_ID");
mtiBean.setText( pageContext,Account_ID );
Thanx
Pratap

Place default checkbox value "in SESSION" on initial page load

Oracle 11.2
Apex 4.1
Desire outcome: Chart renders on inital page load using default value of checkbox in query.
I have a checkbox with a default (checked) value. It shows checked when the page renders for the first time but the value is not in the SESSION state. I use this value in a query for a chart. I do not want to use a Submit button so I have a dynamic action submitting the value for the checkbox and the chart refreshes as desired when I check and uncheck the box.
I tried "Fire on Page Load" in the DA Execution Options, as well, but that caused a loop where the page renders and immmediately renders, and immediately renders, etc.
Is there a declarative solution that submits the current, in this case default, values when the page is loaded? I only need and want the default values used the first time the page is accessed. This is the initial page of the application but I need the same behavior on all pages for the separate checkbox selections found there.
May God Bless,
Howard

Howard (DBA in Training) wrote:
If I remove the Default Value and add a Before Header page computation for the item with static assignment to
a:bI get the 2 A/B checkboxes, both checked, and the value is set in session state.If you log in here, you can see it up close and personal!
http://apex.oracle.com/pls/apex/f?p=21997:3 Login: Dever / Ima9Dever
The Default Value colon-delimited string must contain the checkbox values, not the labels. In a static LOV the checkbox options are specified as <tt>label;value</tt> pairs. Thus in your checkbox LOV the labels are A/B, whilst the values are a/b. The values are case-sensitive.
The Default Value should therefore be:
a:bwhereas you've specified:
A:BWith the checkbox item LOV Display Extra Values property set to Yes, APEX displays these extra values that are not included in the LOV definition as additional checkboxes. You can see this if you inspect the rendered checkbox elements in the HTML source:
<input type="checkbox" id="P3_CHECKBOX_0" name="p_v01" value="a">
<input type="checkbox" id="P3_CHECKBOX_1" name="p_v01" value="b">
<input type="checkbox" id="P3_CHECKBOX_2" name="p_v01" value="A" checked="checked">
<input type="checkbox" id="P3_CHECKBOX_3" name="p_v01" value="B" checked="checked">You get the a/b values defined in the LOV, plus the extra A/B values the LOV knows nothing about.
==== ) How do you keep it from setting/resetting these values each time the
page is rendered? The need is to do it only the very first time? ( ====Put a Value of Item / Column in Expression 1 Is NULL condition on the Computation. Problem then is that the computation will be run if the user can [legitimately] deselect all of the checkboxes, either leaving you back where you started, or requiring the use of a further item to flag whether it is the really "the very first time" (which I find intellectually deeply unsatisfactory). This may be a sign that the control should really be a radio group that always has one option set, rather than a check box.

Passing checkbox values to popup window on page submit

Hello,
I'm using APEX 3.2.
On one page I have a SQL report with checkboxes that are dynamically created using SQL: select apex_item.checkbox(1, bm_id) as "check", ...
I now want to add a button to the page and when a user clicks on the button, the page should submit and a popup window should open with some extra fields to fill in. Now, in the popup window, I want to add a PL/SQL process and loop to all the values of the checked checkboxes in the parent page using the APEX_APPLICATION.G_F01() array. Can I do this? I tried it but the array always seems to be empty. Do I have to pass all checked values to the Javascript function which opens the popup window??
Thanks,
Matthias

Matthias:
The APEX_APPLICATION.G_F01() will have values only after the form has been submitted.
So,your best bet is to use javascript to make the selected checkbox values available in the pop-up window.
Varad

Date Picker has to submit the default value after the page load???

Hello All,
I have 2 date pickers 'Start' and 'End' on a screen with report that has a where clause using above values. Start defaults to current date, End defaults to current month end date, I have another radio group with default to Monthly......
Now when the page loads, I see the default values for 'Start' and 'End' date pickers but the report doesn't reflect those values. I added an on change dynamic action, and so when I change the value of 'End' date picker, it submits the page and now the values are reflected in the report........
I tried creating another dynamic action > with event On Page Load.....and disable fire on page load, and to submit the page, this is causing an infinite loop of submitions........can you please tell me how to achieve this with out putting an exclusive submit button on the Screen.......
Thanks for your time.
DK

user12296343 wrote:
Hello All,
I have 2 date pickers 'Start' and 'End' on a screen with report that has a where clause using above values. Start defaults to current date, End defaults to current month end date, I have another radio group with default to Monthly......
Now when the page loads, I see the default values for 'Start' and 'End' date pickers but the report doesn't reflect those values. I added an on change dynamic action, and so when I change the value of 'End' date picker, it submits the page and now the values are reflected in the report........
I tried creating another dynamic action > with event On Page Load.....and disable fire on page load, and to submit the page, this is causing an infinite loop of submitions........can you please tell me how to achieve this with out putting an exclusive submit button on the Screen.......
Thanks for your time.
You don't have to submit the page here.
What version of apex?
What report is it? i.e. Interactive report/Classic report
Depending on your version of apex you can simply use the Page Items to Submit attribute to set the session state

Setting components values in the ADF page load time

Hi,
We are trying to set the components labels dynamically, so each time the page is loaded we are loading the related labels from the database, instead of using the default database column names driven labels.
We get the labels text okay from the database in the afterPhase method, but we do not have access to the output text UI items then, so a call scuh as this getOutputText1() will return null.
We have also tried to use value binding for the output text, e.g. value=#{backing_untitled2.verbiage}, where verbiage attribute was set in the afterPhase method. The method is called okay and sets the attribute, but for some reason the attribute is then set back and displayed as null.
The same code is executed okay in a command button.
Any idea why is that failing, or how to populate these labels dynamically in the page load time better than the above?
Thanks in advance
Mohamed Elmallah

Hi,
I think you should re-think your strategy and not read the labels from the database all the time. Instead, read it into a class that extends HashMap one time and put it into the session. Then reference the bean #{sessionScope.beanname['label'], which will call the HashMap's getter method. Use the "label" name to find the label for the particular key
If you r application becomes big, you may want to think of handling the session bean size through leaning it under specific conditions
Frank

Checkbox values dont submit when loaded from .fdf file

Hello,
I have created a form using LiveCycle. The form is part of a web application that allows users to edit and save forms using .fdf data. The user gets a .fdf file which grabs its template from my web server. The fdf fills in the saved data fine, but when they submit, checkbox values are not sent correctly. If the user manually unchecks and checks the box, the data is sent, but if they dont change it at all, leaving the box checked, the value is not submitted. The form submits using an http submit button pointed to my server. Everything comes over correctly, except the checkboxes.
Any help would be greatly appreciated.

Do you have the PDF and FDF posted anywhere that we could look at? I've used a /F tag pointing to an HTTP location many times ... it does work.

"Compile time user.agent value doesn't match the run time user.agent value" alert on each page load.

My Firefox was working fine, and now I just changed the settings (History) to delete all the data once, I closed the browser as default and installed LinkExtend, WOT and SecretAgent plugins, and Firefox is showing me an error message. I have reset the settings back and disabled the extensions, but still its showing an alert message for each page load(atleast once it'll show for each page load, sometimes it may exceed to 2 (or) 3. Here, I've given the link for my problem : https://dl.dropboxusercontent.com/u/76460759/Firefox_Error.png . Any here suggest me how to solve this issue.

Please update to Firefox 21 [[Update Firefox to the latest version]]

How to Auto Select some RadioButton on page load using ADF/JSF

Hi,
I am learning ADF and need some help. I have multiple radio buttons and couple of text boxes on my page. How can I make some radio button be selected based on some value from a database table and also populate the text boxes with the corrosponding value when a page loads. Any tips on how it can be done using ADF. Any sample tutorial will be helpful.
Thanks

Hi,
when you e.g. use ADF BC then the radio button should be selected automatically based on the value of the attribute. If the row is new then you can have a default value specified in the ADF BC ViewObject attribute.
However, if you just dragged the radio button and checkboxes onto the page - not using any ADF binding - then you will have to create a managed bean with a field variable (incl. setter/getter methods) to link the radio button's value property to it using Expression Language
Frank

APEX dynamic action - How to hide an item after the page loads

Hello
I have a form with item Type, lesson and page. I want to create a dynamic action like "on page load" if Type = x then don't show lesson and page items. .
How do I say if Type=x then don't show lesson and page. otherwise show them.
Please note Dynamic action, Event=Page load
Thanks

create dynamic action like
Event:Change
Selection Type:Item
Item:Type
Condition:Equal To
value:X
Select Action:Hide
Select Items to hide
also create opposite false action
and click on page checkbox below action to yes
Hope this may helps
pars.

I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded

Here is a ticket regarding our current client web application ( Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
503 error occurs.
. Below is a conversation with Host Server support assistant.Can you take a look at it?
Ben (support) - Hi
Customer - We're having an issue with our windows host
Ben (support) - What's the issue?
Customer - 503 errors
Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error?
Customer - no, it comes and goes without any change Customer - could you have access to any logs ?
Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections
Ben (support) - You can review more about this at the link \
Customer - probably yes - how can we troubleshoot ?
Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once
Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner
Customer - we're low traffic, this is an image DB to show our product details to our customers
Customer - ahhhh, so we could have straying sessions ?
Ben (support) - Correct Customer - any way you could check if it's the case ?
Customer - because it was working previously
Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay.
Customer - so our 2/3 max concurrent users can max out the 200 sessions
Customer - correct ?
Customer - is there a timeout ?
Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine
Customer - thank you so much
Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months
Customer - any changes from your side ? lowering of the value maybe ?
Customer - I'm trying to understand what I can report as a significant change
Ben (support) - We haven't touched that limit in years
Ben (support) - This could just be more users to your site than normal or even more images
Customer - I was thinking that could be it indeed
Customer - so I need to research how to quickly close connections when not needed
Ben (support) - Correctly
Ben (support) - correct
Customer - thanks !!
Ben (support) - Your welcome
Analysis :
The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors.
From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks.
Cheers,
Customer

Hi Md,
Thank you for posting in the MSDN forum.
>>
I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
Since
Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
If yes, I suggest you could post the issue directly on
ASP.NET forum, it would better support your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Retrieving checkbox values from JSP

In my program I have an 'ADD' form.
In that form I ask the question "Do you have a car?"
with a single checkbox for reply.
The code I use is below.
Can anyone tell me how to set the checkbox to 'ticked' or 'unticked' in my
main jsp by sending paramters from the ADD form's checkbox??
ADD FORM...
<form action='post' method='servlet/controller?task=addEmployee'>
<input type'text' name='emplpoyee'>
<input type='checkbox' name='car' value='true'>
<input type='submit' name='submit' value='Add'>
</form>
Through a class I retrieve the values posted
public Page doTask() {
Employees employee = new Employees();
employee.setName(request.getParameter("name"));
employee.setCar(Boolean.getBoolean(request.getParameter("car")));
try{
String submit = request.getParameter("submit");
if(submit.equals("Add")){
model.addEmployee(employee);
Page nextPage = new Page("/servlet/Controller?task=GetAllEmployeesTask");
return nextPage;
This class sends the parameters to my main JSP where
this information is inserted. ('employees.jsp')
my name is retrieved so...
<= employees.getName()>
how would I retrieve/set a checkbox value

request.getParameter("car")
the thing is that the browser will not send unchecked checkbox values. so you can only know it was checked by the presense or absense of the value.

Selectboolean Checkbox value on Page load

Similar Messages

Maybe you are looking for