Selection issue 1px gap

Hi,
Hi , I have drawn a path using the pen tool in photoshop cs5  then I use 'command j'  to copy the selection to new layer, then I delete the selection from the back ground layer. This should look no different however I can see a 1 px gap between the background and the new layer. I don't why this is happening as it didnt happen yesterday. I tried with the marquee tool and I got the same problem along two edges.  Any idea why? how do I fix this?   Thanks

So I guess thats why when I rang adobe and spoke to them on the phone for over an hour and gave them access to my desktop they had no clue what was causing the problem and did not mention anything you are saying. This also does not happen on the computers at my uni.
Besides the fact that my image is of a size that if I were to work at 100% or more then It would be too big on the screen and so I could not see wjhat Im doing. What then?? I cant shrink my images, they have to be a certain size.
Also if my image is at 50% zoom when I choose print then the artefact gets printed.!!!    This has never been an issue until yestereday. When was the last update?   Im thinking I was updated automatically and this is a bug. It has to be.
Oh and here is a screen shot at 100% which goes against what you are telling me-

Similar Messages

  • Photoshop CS4 selection tool 1px off

    HI,
    for some reason, when using rectangular marquee tool in PS CS4, the selection is 1px off. Ie, when i draw a selection rectangle around a box, on 100% zoom it seems a perfect fit, but when zooming closer, the selection is off to the left by 1 px.
    When i use "transform selection" and drag the selection 1px to match the shape again on high zoom, it shows OK both on 100% and zoomed in.
    using Mac Pro 2x2.66Xeon Intel, OS X 10.5.6 , ATI RadeonX1900
    Thanks, A.

    Chris Cox wrote:
    Of course, if you can provide us with information about your GPU and OS version, we can try to track down the cases we missed, and continue to work with Apple and the GPU makers to get the driver issue resolved.
    Since you asked... still 1 pixel off with openGL on, Mac OS X 10.6.6 and Photoshop 12.01.
    ATI Radeon HD 5770:
      Chipset Model: ATI Radeon HD 5770
      Type: GPU
      Bus: PCIe
      Slot: Slot-1
      PCIe Lane Width: x16
      VRAM (Total): 1024 MB
      Vendor: ATI (0x1002)
      Device ID: 0x68b8
      Revision ID: 0x0000
      ROM Revision: 113-C0160C-155
      EFI Driver Version: 01.00.436
      Displays:
    DELL U2711:
      Resolution: 2560 x 1440 @ 60 Hz
      Pixel Depth: 32-Bit Color (ARGB8888)
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Rotation: Supported
      Connection Type: DisplayPort
      Television: Yes

  • MSOutlook HTML newsletter issues - large gaps between large images and small gaps...

    Please can you help me!
    Searched the web & found plently of advice but still getting formatting display issue when viewing HTML newsletter in MS Outlook.
    Fully aware on the basics regarding the multiple issues when creating HTML newsletters but this is driving me crazy.
    Apparently there is a image height limit within Outlook (can't find out what this is) so I have sliced my larger images into 5/6 parts which solves the display issue in Outlook.
    But the gaps between the slices are now being displayed as small blank spaces within Hotmail.
    I did use <br> between each slice as without caused the fixed 600px wide containing table to expand due to the slices stacking hoz.
    Also still getting small gaps (like <br> spaces) between all images in Outlook when displaying perfectly (no gaps) in a browser.
    This is my newsletter displaying correctly via a browser:
    http://eu.shorts.tv/site-admin/modules/mod_mail/SHORTSTV_DECEMBER_2012.htm
    Using Dreamweaver 4 (do have the latest version via Adobe Creative Cloud Membership but not on this system).
    Hope you can help
    Many thanks

    Many thanks David
    I also found this article which is currently sitting on my desk.
    Pdf would make perfect sense or even a url link to view via a browser but these guys need it contained within the email.
    Thanks again for your kind advice.
    Regards
    ShortsTV
    Date: Fri, 30 Nov 2012 18:05:08 -0700
    From: [email protected]
    To: [email protected]
    Subject: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
        Re: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
        created by David__B in Adobe Creative Cloud - View the full discussion
    Hey Shortstv, Not something I know much about, searched and found thishttp://robcubbon.com/create-html-email-newsletters-outlook/ Maybe create it as a PDF attachment instead? -Dave
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4888255#4888255
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4888255#4888255
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4888255#4888255. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Menu selection issues in Flash CS4 for Mac

    I'm having a few menu selection issues in Flash. It seems some fields are de-selecting automatically (and quickly). For instance:
    1) When I double-click a layer to change it's name, it highlights then immediately de-selects. I can only rename by right-clicking and bringing up the Properties dialog.
    2) Fields highlight briefly then immediately de-select in the Properties menu when using the Tab button to advance or cycle thru fields. I have to click on each field individually to enter dimensions/characters.
    Possibly related...
    On occasion, I'm having an issue in Photoshop where the tools are off by 30 pixels or so. Examples:
    - Paint brush affects an area approximately 30px to the right and down from the brush head.
    - Selection tool selects an area approximately 30px to the right and down from the arrow head.
    This only happens on occasion and can be fixed by restarting Photoshop. I have not had any luck fixing the problems experienced within Flash.
    I'm experiencing this on two different machines that have CS4 installed. My only guess is a conflict with a Logitech driver OR a Wacom driver, but I have uninstalled the software and unplugged the Logitech mouse and Wacom tablet to no avail.
    Long time Flash/Photoshop user.... never had a problem like this.
    Anyone else have these issues or know a fix?
    Mac OS X 10.5.7
    Macbook Pro & iMac
    Logitech Control Center 2.7.0
    Wacom Driver 6.1.1-2(RC) for Mac OS X v. 10.4 & 10.5

    Hi there,
    This is a known issue, however we have not been able to reproduce it internally. The way to fix it (assuming it's the same problem) is to change your workspace (such as resetting to a default shipping layout, and then modifying from there), as it seems as though something about the workspace is causing the problem. It could be very specific to where its layed out on your monitor(s), some exact pixel size of a panel and/or grouping - and so on. However, we haven't been able to reproduce this internally yet - only reproed and fixed similar problems - so I cannot say for sure, however changing the workspace has fixed it for the other users I've talked to seeing this one.
    If you are able to share the following about one or both of your computers and send it to jdh (at) adobe, greatly appreciated:
    * workspace XML file from the Configuration directory (before changing the workspace!)
    * description monitor layout (ie: primary on left, secondary on right... or "one" )
    * monitor resolution(s)
    * screenshot(s) of your layout exhibiting the problem
    Thanks!

  • Datagrid select issue

    I am using flex builder 2.01 and have been using datagrids
    for a while now. I have recently ran into a weird situation where I
    have one datagrid out of three that just will not allow a manual
    selection. If I set the index to 0 for instance, the initial view
    of the datagrid shows the first item selected. If I go to select a
    different item, the first item becomes unselected and no other item
    can be selected. If I leave the initial state to be no item
    selected, I can never select an item. All other datagrids are
    working fine. I have tried to set selectable to true but that
    didn't help. This is really odd, any assistance would be greatly
    appreciated.

    Mmmm... Well the good news is I fixed it. The bad news is I
    have no clue why it fixed it. This particular datagrid is in a
    different tab in a tabnavigator panel. Attached is the expanded
    working code. On the line:
    <mx:Canvas label="Archived" width="100%" height="100%"
    id="ArchiveTab">
    I had a click="{GetPropertyArchive()}" to refresh the data on
    tab selection. This was old code that was made unnecessary at a
    later date but I did not remove the code. My guess is the datagrid
    assumed the characteristics of the parent tabnavigator and instead
    of ... wait that can't be right. If that was the case then changing
    the datasource would not have fixed the select issue because the
    'click' definition on the tabnavigator still existed. I would
    really like to understand why this mattered so I could avoid this
    issue in the future. Any ideas??

  • HP Laserjet 2200dtn paper select issue

    I have an HP Laserjet 2200dtn connected via jet direct with a direct ip. I can print to the device with one issue. All print jobs using the "Automatically Select" option for paper tray go to the manual tray and require me to tell the printer to continue. Prior to Snow Leopard the driver would go to the first available paper feed drawer (if paper was in manual it would go there, otherwise it went to either tray 2 or tray 3 on its on). Any Ideas? I would rather the printer automatically select tray 3 to print from and have me manually select tray 1 when I need it.
    Thanks.

    Chances are the printer has a small bit of paper that is still jammed in it. When paper jams always try to pull in the direction of the paper path! If it tears then remove the toner cartridge to see if you can see any bits of paper inside. I have the Laserjet 1012 which is a similar design, early in it's life I had a similar issue, after removing the toner cartridge and seeing all bits of paper were gone I still got an error. I then removed the top cover of the printer, located and removed the offending piece of paper, put it back together and now several thousands of pages later all is fine.
    If that doesn't work then contact HP's support (they will reply to an email with 24 hours) or go the chat route. If you try to call because you are well out of warranty there will be charge.

  • [Wine] Sound card selecting issues

    Since a month or too, after one of my weekly updates, wine started to select the wrong sound card for its audio playback. Thus, alas, no sound in wine applications.
    When selecting the audio tab in winecfg, I get the following console output:
    fixme:mixer:ALSA_MixerInit No master control found on HDA NVidia, disabling mixer
    fixme:jack:JACK_drvLoad error loading the jack library libjack.so.0, please install this library to use jack
    I don't use jack, so that can be ignored. The HDA NVidia - the S/PDIF on my NVidia video card I presume, I don't use either. What I do use is my onboard sound chip in combination with alsa, which works perfectly on non-wine applications.
    So, I got the following set up:
    $ cat /proc/asound/modules
    0 snd_hda_intel
    1 snd_hda_intel
    $ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: SB [HDA ATI SB], device 0: VT1818S Analog [VT1818S Analog]
    Subdevices: 2/2
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    card 0: SB [HDA ATI SB], device 1: VT1818S Digital [VT1818S Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    $ ls -l /sys/module/snd/holders
    total 0
    lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hda_codec -> ../../snd_hda_codec
    lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hda_codec_hdmi -> ../../snd_hda_codec_hdmi
    lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hda_codec_via -> ../../snd_hda_codec_via
    lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hda_intel -> ../../snd_hda_intel
    lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_hwdep -> ../../snd_hwdep
    lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_pcm -> ../../snd_pcm
    lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_seq -> ../../snd_seq
    lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_seq_device -> ../../snd_seq_device
    lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_seq_oss -> ../../snd_seq_oss
    lrwxrwxrwx 1 root root 0 Feb 21 12:14 snd_timer -> ../../snd_timer
    $ lsmod|grep '^snd' | column -t
    snd_hda_codec_hdmi 22593 4
    snd_hda_codec_via 52963 1
    snd_seq_dummy 1479 0
    snd_seq_oss 29240 0
    snd_seq_midi_event 5516 1 snd_seq_oss
    snd_seq 50562 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 5281 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_hda_intel 21837 1
    snd_hda_codec 74577 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
    snd_hwdep 6222 1 snd_hda_codec
    snd_pcm 72321 2 snd_hda_intel,snd_hda_codec
    snd_timer 19537 2 snd_seq,snd_pcm
    snd 58906 12 snd_hda_codec_hdmi,snd_hda_codec_via,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    snd_page_alloc 7361 2 snd_hda_intel,snd_pcm
    Note that I already blacklisted snd_hda_codec_nvhdmi, which was in the above output before blacklisting.
    Also note the weirdness of having two identical modules for card 0 and card 1. I guess the chip on the video card is Intel as well. I this possible?
    Now the list of things I tried, all without a positive result.
    First, I completely reconfigured my alsa set up.
    Secondly, I blacklisted snd_hda_codec_nvhdmi in /etc/rc.conf
    Thirdly, I used the info from http://wiki.winehq.org/UsefulRegistryKeys to force wine to use card0:
    AutoScanCards=N
    AutoScanDevices=N
    DeviceCTL1=hw:0
    DevicePCM1=hw:0
    Fourthly, I edited .asoundrc to force alsa to use only card0:
    # define soundcard to use, hw0:0
    pcm.!default {
    type hw
    card SB
    # device 0
    # define control device to use, hw0:0
    ctl.!default {
    type hw
    card SB
    # device 0
    Finally, I tried the above globally in /etc/asound.conf
    I even waited two wine updates to see if that would fix it.
    All above did not solve the sound issue and winecfg still gives the same error output as before.
    Note that the sound works fine in everything, except in wine.
    Anyone has any ideas or insight?

    Hi!
    Similar problem here
    [zom@myhost ~]$ winecfg
    fixme:mixer:ALSA_MixerInit No master control found on HDA NVidia, disabling mixer
    fixme:mixer:ALSA_MixerInit No master control found on HDA NVidia, disabling mixer
    err:module:load_builtin_dll failed to load .so lib for builtin L"winemp3.acm": libmpg123.so.0: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio
    fixme:winmm:proc_PlaySound Couldn't play header
    fixme:winmm:proc_PlaySound Couldn't play header
    [zom@myhost ~]$ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    [zom@myhost ~]$ cat /proc/asound/modules
    0 snd_hda_intel
    1 snd_hda_intel
    I will follow some of your steps and research a bit to see if I can find something.
    Please remember to post if you get it working!
    Regards,
    Edit:
    Seems the card is not well specified in your /etc/asound.conf
    % cat /etc/asound.conf
    pcm.!default {
    type plug
    slave.pcm {
    type hw
    card 0
    device 3
    I think you should put the device also, as shown on your "aplay -l". Try and let me know (I will try asap).
    Edit: Forget what I just said and just follow strictly the wine wiki page. In my case it was a problem when installing lib32-openal from the repos. It gave an error and did not install the first time, but I thought it was removed from the repos and wasn't needed anymore.
    Last edited by Darkzom (2011-03-24 01:00:55)

  • F150- Free selection issue

    Hi,
    Dunning run is carried out only for a particular group of Industry (KNA1-BRSCH)  in the transaction F150. It is not even selecting a single customer in the group when we consider it in the free selection. I have not ticked the exclude check box in the free selection tab when I consider the industry wise dunning.
    But when we take individual customers and run then it is giving us the log.
    please provide your inputs on this issue.
    kind regards
    sap student

    Hi,
    Please find length of the field KNA1-BRSCH in table KNA1 using transaction code SE11.
    If industry value you enter in free selection (F150) is less than the character length defined for the field then you have to prefix it with Zeros.
    For example if reconciliation account is of length 10 in table but your GL account length is 8 characters then you have to add two zeros before you GL account while using reconciliation account in free selection in F150 or F110.
    Thanks!
    Raju

  • Path Selection issue in Table Test

    Hi All
    I got issue in adding Form actions (ex:- Table test, Text matching test ) in my Oracle Forms and report product. It is not selecting the Path..
    Can any one suggest why the Path is not selecting ...?
    Appreciate your feed back.
    Regards,
    Sairam

    Hi Deepu,
    Please find the code below while doing text matching test
    web.window("//forms:window[(@name='WIN1')]").verifyText(
                                  "uniform", "365", Source.DisplayContent,
                                  TextPresence.PassIfPresent, MatchOption.Exact);
    Regards,
    Sairam

  • Path selection issue

    Hi All
    I got issue in adding Form actions (ex:- Table test, Text matching test ) in my Oracle Forms and report product. It is not selecting the Path..
    Can any one suggest why the Path is not selecting ...?
    Appreciate your feed back.
    Regards,
    Sairam

    Hi Deepu,
    We are using OATS version 12.2, JAVA Version 6.0.350 and erp application is our own application developed in oracle 10g forms. We did not get any errors while installing OATS.
    Regards,
    Sairam

  • Web font selection issue in Muse?

    Web font issue in Muse, when I load web fonts which have various weights i.e. regular and bold I an unable to select this font in any weight at all. Is anybody else experiencing this issue and has anybody got a solution?

    Hi Zak
    Just a quick follow-up after checking this issue at home. I opened Muse and loaded several web fonts, some of which had various weights available. I was able to select these fonts and change the weights fine. However I left Muse open and returned several hours later and found that I was unable to select any of these fonts.
    So you workaround (turning Muse off and on again) certainly works but the bug is still there. FYI I am using the latest version of Muse on an iMac using Yosemite OSX. One thought, I have a screensaver set up on my home iMac, could this possibly cause this problem?
    I will continue to monitor Muse on my iMac at work running on OSX Maverick to see if I get the same problem. I don’t have a screen saver set-up on this iMac as it’s never left long enough for it to start up.
    This then may help determine if this is either an OSX Yosemite issue or a screen saver issue.
    Kind Regards
    Jeremy

  • Variable selection issue

    can someone plzzz help me regarding the following issue..........
      how to limit set of master data values in variable selection during query execution?
    cheers
      hari.

    Hi,
    check this link
    it's for increasing the limit you can use it to decrease the limit.
    BEX - number of displayed values
    Thanks

  • AIR 3.6 + Android 4.1.2 + StageText + Tap Text To Select issue

    Hi,
    Have anyone experience the follwoing?. When tapping the StageText to select the text, the app moves up, the StageText moves down (originally the text appears in the text box, see the screenshot) and the top menu in Android (Menu to Cut, paste etc)  goes behind the status bar, see screenshot. In general the StageText seems to beahve very erractic and very bad in Android (I dont know if it is specific for a certain Android OS or not). Any tricks, tips to make the StageText behave a bit more decently in Android?

    Thanks for reporting the issue, Could you please raise it as a bug @ bugbase.adobe.com. Also, please do upload a sample application/sources and steps to demonstrate the problem. Also, please mention the device you're facing problem on.
    Please share the bug number here for reference.
    -Thanks
    Pahup

  • BW-BPS Attribute variable selections issues

    Hi Marc / Gerd,
    I am using an attribute variable on material that has a lot of filters for values on material group, material type, EANUPC, and even a date such as created date / product start date (reference 0date). 
    The function /layout has issues if the selection has no material choosen and I know we needed to create exit variables on a previous project (someone else did the ABAP and I set out the spec) to do material group / category selection based on material attribute and the material group variable. 
    Any other good options or work arounds since we cannot use variable in attribute variables?
    Thanks,
    Mary

    Hi Marc,
    1. I checked the layout configuration and the config was transported okay to QA so the field that I want to input does not have compariable checked and it should be open for input.
    2. there are no data slices yet.
    3. Validation check - that might be an issue.  The BW loads originally had some master data not loaded in BWQ and have some mapping not occuring as it should and I have been asking for them for the last 2 load cycles.  I was told all missing master data have been since loaded and I need to ask for a load of the transaction again but the BW person is waiting for some missing mapping.  Also we had to document enabled some infoobjects. 
    But the category we are using for the integration testing should have all the master data correctly set up since I checked on it end of last week.  Do I have to set up some system settings for the document server? Do I need to force it to regenerate after some transports?
    The master data we used for the 2 systems are different since the DEV has very little master data and some were manually maintained or uploaded via flat files.  The BW QA has a lot of master data since R/3 QA has been refreshed recently. 
    Thanks,
    Mary

  • Member Selection issue Smart View 11.1.2.1.102

    Hi there!
    I am experiencing an issue with several different cubes when accessing the member selection function in Smart View version 11.1.2.1.102. The issue is isolated to 4 Essbase cubes, but among the 4 are both ASO & BSO.
    When I highlight the top, left-most Dimension name and click member selection, NO member names display and the dropdown list is unavailable. As soon as the given Dimension is moved out of the POV, I am able to see the full member list. This also means that the member that has moved into the top, left-most position now has the issue of not being able to select any members (certain dimensions are fine no matter their position).
    I am able to move members around by pivoting the dimension and the member selection function behaves normally for some, but the issue pops back up as soon the dimension is moved back to the POV position.
    If anyone has run into this issue with SmartView before and has a fix, please let me know. I would be happy to clarify my issue if anyone is unclear on what exactly I am trying to describe.
    Thank you for your time!

    This was a bug in 11.1.2.1.102. I'm not sure if it was fixed in 11.1.2.1.103 or 11.1.2.2 (I think 11.1.2.103)
    It does not hurt you to upgrade to a higher version of Smart View

Maybe you are looking for