Self-adjusting tax types for the US
Hi everyone,
In the US, there are 89 tax types. I know that UI and FICA taxes are self-adjusting. How do I find out if say tax type 51 - ee occupation tax is self-adjusting? This could tax authority dependent because say for tax type 51, one state may have a max/limit but another state may not.
Is there a way I can find this out?
Regards,
Jasper
Hi there,
Currently, in the standard system, the following tax types have been
hard-coded within U.S. payroll processing to self-adjust.
Tax Type Description
07 State Unemployment Insurance Tax
08 Social Charge Tax
09 Employer Special Payroll Tax
10 Employer Unemployment Tax
11 Employer Debt Repayment Tax
13 Er Emplmt Security Enhancmt Tx
14 Er Re-Emplmt Placemt Tx
15 Er Job Devmt Assessmt Tx
16 Employment Training Tax
17 Employer Health Insurance Tax
18 Employer Workforce Devlmt Tx
28 Er Combined WF&SWF/HC/DI Tax
29 Special Admin Reserve Fund Tax
36 Workforce Enhancement Fee
37 Administrative Contingency Fund Tax
38 Employer Investment Fee
39 Employment Administration Fund
47 Joint Economic Dev. District
You may wish to review SAP note 1259877 in order to obtain more details on the feature 10STT which allows you to configure your self adjusting tax types
Similar Messages
-
Withholding tax type for special G/L accounts
Hi,
Is there a way to define a witholding tax type for a special G/L account type? Up now we can define a withholding tax type for a vendor, but we need to define withholds for particulars vendors/special GL accounts type combination.
What we need is each time an invoice is posted, a withold is made for the vendor only if the posting account has a particular special G/L account type associated.
I hope reqs. beeing understandable.
Any idea is welcome.
mr.Hi
Withholding tax type for special G/L or advance payment can be created as per tax type defined for general invoice/bill entry.
But here the description will be different and '"central invoice proportionate" radio button has to be ticked.As it will help in deducting the tax which has been paid in advance.
So that balance tax can be adjusted when invoice will be entered.
Plz assign points if it is helpful.
Regards
Tapan -
Define Withholding Tax Type for Payment Posting
Hey Guys, I'm configuring Withholding Tax for a company. I know the purpose for defining the withholding tax type for invoice posting, but do understand where is the Withholding tax type for payment posting used? Is it used for advance(down) payment or something else?
Thanks,Hi ,
In some countries there is requirement that you need to deducted Withholding tax either at time of Invoice or payment which ever is ealier . so if you get Invoice first then you deduct the Withholding tax on Invoice and define the tax type and assign to company . but if you make paymnet first which we called advance or down payment then we configure Withholding tax on payment .
If a vendor is liable for withholding tax on invoice it may be liable for payment as well if you think you may pay some advances .
Please let me know if you need more information -
Withholding Tax Type for Payment Posting - Customer Accumulation -
We are using the Withholding Tax Type for Payment Posting for customer with the accumulation per month and checking the minimum/maximum withholding tax base amount to calculate the tax.
When we run the F110 transaction (Automatic Payment) the system creates a BIll of Exchange as Noted items and keep the accounting document created from the SD opened. After the customer pay the bill, the bank send a file informing the payment, then we clearing the accounting document.
But the system updated the WITH_ITEM Table and filled the fields AUGBL(Clearing Document) and AUGDT (Clearing Date) with the number and date of the BIll of Exchange that was created during the F110 running.
I am confused about this situation because according the Withholding Tax Type for Payment Posting, the system only could updated the table WITH_ITEM with an accounting document. Noted items are not an accounting document.
I would like to konw if the system is working properly, or can have something wrong in our configuracion?
Thanks and regards
AugustoHi ,
In some countries there is requirement that you need to deducted Withholding tax either at time of Invoice or payment which ever is ealier . so if you get Invoice first then you deduct the Withholding tax on Invoice and define the tax type and assign to company . but if you make paymnet first which we called advance or down payment then we configure Withholding tax on payment .
If a vendor is liable for withholding tax on invoice it may be liable for payment as well if you think you may pay some advances .
Please let me know if you need more information -
Tax model, Tax combinations and Tax types for New Jersey
We are having problems in computing taxes correctly for Employees who have their Work tax area and Residence tax area as New Jersey.
Can anyone please help with the best Tax model, tax combination and Tax types for these combination for New Jersey.
It will be better if you have employees in New Jersey, who have their Taxes deducted correctly.
We are in an implementation and unfortunately it has been a while since we have applied any Tax related SAP notes or BSI tubs.
Appreciate all help.i have been researching and have found that NJ state taxes are like Puerto Rico taxes. The Schema UMOT may have to be used with a different modifier to calculate Withhoding tax for NJ , different from FED.
Has anyone of you used this schema ? I find that UTAXRAUTHY ( tax authority) is an Operation in the deecisison tree .Can anyone confirm if Tax type is also an operation?
I shall appreciate any related feedback.Thanks. -
HI,
I have used the function module ME_PO_PRICE_SIMULATION to give the pricing details in one report. In the same function module it is also giving the tax applicable for the vendor-material-site combination. ie., tax code and the tax. procedure. Is it possible to find out the Tax type using
this data ie,, if it is LST or CSTHi ,
I think from the taxcode you can findout LST(or) CST
try
G.Ganesh Kumar -
How to add a document type for the residence status GB in infotype 48
Hi Team,
How to add a document type for the residence status GB in infotype 48.
Please answer this at the earliest.PFA screnshot.
Thanks
chrisI believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
When a relationship is created you may watch it also from either end (again INFO is the starting point).
It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it. -
Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark KamoskiHi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Maintaing Tax Types in the Table CRMC_TAX_GROUP
Hi All
In order to download Materials from ECC to CRM2007 via Middleware, I need to maintain the Tax Groups in the Table CRMC_TAX_GROUP and then assignt the Tax Types to the ECC Tax Classifications.
However, I am unable to add entries to the table CRMC_TAX_GROUP either through SE16 or SM30.
I am only able to run the report in Data Browser (SE16) in display mode. When I try to maintian the table using sm30, I get the following Exit Message:
Check maintenance object CRMC_TAX_GROUP or update
function group CRM_PRSALESTAX_C
I request your help and suggestions in this regard.
Thanks in advance.
Regards
ChaitanyaHi,
You can maintain that table using a maintainence view 'CRMV_TAX_GROUP' in sm30.
Thanks
Swagatika -
How I can get the Billing Type for the sales order and its items
How I can get the Billing Type for the sales order and its items. I mean from which SAP tables and how?
Hi,
You need to use two tables.
First use VBFA. Enter the sales order number in the field Predecessar and the value M in SubCt field. This will give all the billing document number for the sales order items.
Then use the billing document numbers in table VBRK, where in you can get the billing document type.
Regards, -
Withholding Tax Report for the Vendor
Hi Friends,
I want to use the report S_PL0_09000447 - Withholding Tax Report for the Vendor, in the selection paramaters the field "Country Variant" is mandatory but in this list i cannot find the relevent country code here.
Could any one please let me know where to maintain this?
Regards,Dear Sapref,
the documentation for that report says:
To use the report for additional countries, select an appropriate
variant as reference; hide the country-specific heading by selecting the
field Country not in heading and entering the required country in the
field Additional heading.
Please be kindly informed that You can use an existing country variant which may match the closest to
your requirement.
Aas far as I know there is no country validation between the company code's country and
the country variant.
Please be kindly informed that You can use the generic report: RFIDYYWT.
I hope this can help You.
Mauri -
Not possible to determine a condition type for the price in ME49
Hi,
While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
Not possible to determine a condition type for the price
Message no. 06657
Diagnosis
When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
Procedure
Contact your system administrator.
The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
UtsavHi Utsav,
You can refer to the following link. it might be useful to you
RFQ price
Thanks
Nisha -
Reg: In Which Table Tax Details for the invoice are stored
Team,
Can you please help me in which table : tax information for the invoice is stored.
I need the following tax : QST_PAID_AMOUNT ,GST_PAID_AMOUNT, GST_CONTRA_AMOUNT information for invoice.
Thanks.Hello Vinay,
Here's the answer -
select single *
from SEOMETAREL
where clsname = 'CL_BBBB'
and reltype = '2'.
The class for which you want to find the superslass will be the field CLSNAME, the superclass itself will be REFCLSNAME and this inheritance relationship is specified through the parameter RELTYPE.
I don't think any further explanation is necessary.
Regards,
Anand MAndalika.
p.s. Please do reward the points if this answer has helped you. -
Calculate teh tax maintained for the PO line items
I need to calculate teh tax maintained for the PO line items...how do i do it????
can somebody help??
kanishakHi,
Use this FM to get data from KOMP
tax amount = komp-mwsbp
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
EXPORTING
comm_head_i = komk
comm_item_i = komp
language = nast-spras
IMPORTING
comm_head_e = komk
comm_item_e = komp
TABLES
tkomv = tkomv
tkomvd = tkomvd.
Regards
Krishna -
Output type for the tcode f.27
Hi All,
Can any body please suggest what is the standard output type for the tcode f.27(Customer Statements).
Thanks in advance,
NagendraHi Brad,
Thanks for reply.
My requirement is to get the out put of f.27 in pdf format in french or english.
Please let me know is there any FM and how to start work on this issue.
Thanks in advance,
Nagendra
Maybe you are looking for
-
My apple id does not work on my home computer
my apple id work son my i phone, ipad, and my work laptop but not on the app store or mobile me on my home computer
-
Free goods not free but at Rs 1
Dear All, I have a requirement under which the free goods determined exclusively will not be free but will have a price of Rs 1.How can I acheive that? Regards, Puneet Makkar
-
What are the iphone 5s wifi roaming thresholds? and are they settable?
I am looking for information on what parameters are used by Iphone5s to perform roaming decision? (signal power or signal quality or a combination of both) What is the set value for each parameter? Is it possible to change these parameters to avoid s
-
My wife was trying to recreate something she had done in MS Word the other day, using Pages, but there is no Word Art or apparently no resources for clip art with iWork. AppleWorks had some clip art available. Are there any resources for clip art for
-
When the user clicks on the SUBMIT button, Acrobat creates an email message that includes directions intended for the recipient of the form. Is it possible to change the text of that message?