Send and Recieve Error code " Receiving reported error (0x80004005): The operation failed"

This is what is happening after installing 2010 on to a computer that was running 2007 Outlook.  Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and receive
error. Then a pop up dialog box comes up with the following error
Receiving reported error (0x80004005): The operation failed
Does anyone know how to fix this
Nexusxox

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing. Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

Similar Messages

  • TS1717 When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

    When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

    Hi inharmony35,
    If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
    Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Apple Support: Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    - Brenden

  • Outlook 2007 after updates to iTunes and iOS: Task 'iCloud - Sending' reported error (0X80004005): 'The operation failed.'

    Since updating to the latest iTunes and the latest iOS, I am now unable to send calendar invites, which is what I use to keep my personal calendar, iCloud calendar, Thunderbird calendar, and two different work address calendars in sync.
    I've traced the problem to the inability of Outlook 2007 to send emails after the update.  I get the above error message when I try.
    One thing I noticed is that the location of my iCloud inbox and outbox changed to a location under my Personal Folders as opposed to where it used to be, under iCloud.  I think the issue is with the creation of different *.pst files and their locations, and the settings that Outlook 2007 automatically picked up after the iTunes and iOS updates.
    I'd like to fix this, but am not quite sure how.  I think it has to do with not being able to set the data file I believe to be the proper item as the Default.
    I assume others have also experienced this issue.  If so, has anybody managed to solve it yet?  If you have, please share your solution.
    -- Thanks,
       Mary

    Hi,
    Glad to know that you have found the solution.
    Thanks for your generous sharing. Have a nice day : )
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

    Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
    I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

    Hi,
    What’s your Outlook account? Exchange account or some other Internet email accounts?
    This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
    http://support.microsoft.com/kb/2231628
    If the issue persists, please create a new Outlook profile and add the email account to have a try:
    http://support.microsoft.com/kb/829918
    Regards,
    Winnie Liang
    TechNet Community Support

  • RW-50004: Error code received when running external process.

    Hi,
    I am trying to install 11.5.10 on windows vista and receiveing following error.
    RW-50004: Error code received when running external process. Check log for details. Running Database Install Driver for VIS Instance
    When checked on the log file following is the error. Could anyone pls help me with this regard
    There was an error while running the command - c:\OracleApps\visdb\9.2.0\temp\VIS_erp\adrun9i.cmd APPS APPS
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process.
    "dbInstancecfg" file shows below error
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    32-bit Windows Error: 2: No such file or directory
    Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=erp.erp)(Port=1521))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    32-bit Windows Error: 61: Unknown error
    LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 13-JUL-2008 05:48:04
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Starting tnslsnr: please wait...
    TNS-12546: TNS:permission denied
    TNS-12560: TNS:protocol adapter error
    TNS-00516: Permission denied
    32-bit Windows Error: 5: Input/output error
    addlnctl.cmd exiting with status 3
    OpenSCManager failed
    adsvdlsn.cmd exiting with status 1002
    ERRORCODE = 1002 ERRORCODE_END
    .end std out.
    System error 1060 has occurred.
    The specified service does not exist as an installed service.
    .end err out.
    File c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit_inst.cmd not instantiated in the current pass, this file will not be executed
    Executing script in InstantiateFile:
    c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit.cmd
    script returned:
    Sun 07/13/2008
    05:48 AM
    1 file(s) copied.
    1 file(s) copied.
    1 file(s) copied.
    "afmkinit.cmd exiting with status 0"
    ERRORCODE = 0 ERRORCODE_END
    .end std out.
    .end err out.
    Skipping INSTE8_PRF
    Skipping INSTE8_APPLY
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [SETUP PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp
    adsvdlsn.cmd INSTE8_SETUP 1002
    AutoConfig is exiting with status 1

    Thanks for the update and the link was informational.
    Can I install following on windows vista? Pls confirm.
    Oracle® Applications 11i Release 10.2 Media Pack for
    Microsoft Windows (32-bit) No That's not possible, if you would like to use this machine for Applications then the OS needs to be changed or install vmware/Microsoft Virtual PC with a Certified Operating system to be able to use Applications.
    Thanks
    Ronald

  • When you try to send or to receive email in Outlook 2010, you may receive one of these error messages: 0x8004010F: Outlook data file cannot be accessed. or 0x8004010F: The operation failed. An object could not be found.

    0x8004010F: The operation failed. An object could not be found.
    1. reviewed Profile instructions
    2. Ran SytTools thinking it would fix the error. NO although I could send received I ended up with a giant pst 
    3. Back to Profile Instructions.
    4. Set up new profile with my email address. email address tested well. Run Outlook. loads as outlook data PST
    and  gmail address PST.  Deleted all the Gmail subscriptions to improve speed. Original error was gone but have two GIGANIC PST FILES.
    5. Set up another new profile with my email address and a named pst.  Run Outlook under that Profile -
    comes up with newly named pst and the gmail addrress pst (although I can't figure out where that pst is located. Will not let me use email address as default Profile.  Tried different approaches and still ended up always with the gmail address pst.  Deleted
    all profiles but email address and comes   up.
    6. Should I just go ahead and use the gmail address pst  I need to import data or download data from gmail
    to get last years correspondence.e
    7. Outlook is my lifeblood, I am in communications and every submitted email gets moved to a file with an update.
    Help?
    8. One option is to merge psts but might make worse mess.
    Thanks.  Beautiful Beach weather here!

    To resolve error 0x8004010F , identify the current location of your default Outlook data file, and then create a new Outlook profile.
    Step 1- Locate the default Outlook data file
    Click Start, and then click Control Panel.
    In Control Panel, click Mail.
    In the Mail Setup - Outlook dialog box, click Show Profiles.
    Select your current Outlook profile, and then click Properties.
    In the Mail Setup - Outlook dialog box, click Data Files.
    Select the Data Files tab in the Account Settings dialog box, and then note the name and location of the default data file for your profile (a check mark will denote the default data file).
    Click Close.
    Step 2 - Create a new Outlook profile
    Step 3 - Configure your new Outlook profile as the default profile
    More detailed steps you can refer to this KB article:
    http://support.microsoft.com/kb/2659085

  • Application builder Error: Windows SDK function returned an error. (Error code -12) *** End Error Report

     try to create an installer in Labview 8.6.  The build fail and I got this message.
    CDK_CreateNewWizard_Invoke.vi.ProxyCaller >> CDK_CreateNewWizard_Invoke.vi >> CDK_InstallerConfiguration_Editor.vi 
    >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
    Loading product deployment information
    Loading product deployment information
    Loading product deployment information
    Loading product deployment information
    Adding files to installer
    Done adding files
    Preparing to build deployment
    Copying products from distributions
    Copying distribution 'NI LabVIEW 8.6.1 Datalogging and Supervisory Control Module' from: 
    D:\software\application\LabView\NI.LABVIEW\NI-Labview 8.6.1 DSC Module\ to: C:\Documents and Settings\Lidaoling\桌面
    \Builds\generate waveform\My Installer\
    Building deployment
    Copying setup files
    Setting merged database information
    Setting product information
    Setting developer part information
    Starting final build
    Validating...
    Copying files...
    Updating files...
    Creating merged database...
    *** Error: Windows SDK function returned an error. (Error code -12)
    *** End Error Report
    Done building deployment 

    Solution

  • Error when install 11.5.9: "Error Code received when.."

    Hi
    When try fresh install Oracle 11.5.9 and show the follewing error: "Error COde received when running external process. Check log file for details. Running Database Install Driver for PRD instance"
    This show when run adrundb.sh in step 3 of 5
    (My enviroment is AIX 5.2)
    Thans for your help.

    if you are runing the installation from stager area make sure that the permission for this stage area are 777 aslo you can run rapidwiz -restart so you can complet the installation

  • Suddenly, Receiving' reported error (0x80042108) in Outlook .......

    Here is the error message that has been appearing since Friday 10/17 when I try to retrieve verizon email via Outlook 2013:
    Receiving' reported error (0x80042108) : 'Outlook cannot connect to your incoming (POP3) e-mail server. If you continue to receive this message, contact your server administrator or Internet service provider (ISP).'
    I see a lot of references to this error. I'm convinced it's a probelm with Verizon, because I've:
    1) repaired the outlook.pst file
    2) reinstalled Outlook
    3) restored my pc to a state before the error appeared
    4) turned MS firewall on and off with no effect
    5) checked and rechecked the confiuration settings in Outlook for my verizon acct
    At this point, there is nothing more I can do. Please advise, thanks.
    J Mike
    Solved!
    Go to Solution.

    jmikef wrote:
    Why the silent treatment from Verizon?
    Because this is a peer-to-peer forum.  Verizon doesn't participate in discussions here.  If you want a response from Verizon, you have to contact them using chat or phone.
    Enjoy.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

    I am having problems  saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
    The document could not be saved. The server said:
    “The operation failed because an unexpected error occurred. (Result code 0×80020005)”
    Please ensure you have completed all required properties with the correct information and try again.
    I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
    Adobe Acrobat version 10.1.13
    SharePoint 2010

    Hi quodd,,
    We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
    1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
    2. How are you opening and saving the PDF, the exact workflow?
         Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
    3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
    4. Please verify that columns name do not contain spaces or some other special characters.
       Can you try to save PDF to library with Custom template and just a single managed metadata column  with a simple name
    Thanks,
    Nikhil Gupta

  • Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

  • I've spent 6 hours trying to update my iPad, and it doesn't work. It can't get past trying to back up, and just stops and gives an error code. I've deleted the backup, re-synced, and tried again and still no luck. What do I do now?

    I've spent 6 hours trying to update my iPad, and it doesn't work. It can't get past trying to back up, and just stops and gives an error code. I've deleted the backup, re-synced, and tried again and still no luck. What do I do now?

    I am not running any antivirus software on my Mac, and I have the firewall shut off. Any other ideas? I have not problem downloading all other Apple software updates. I downloaded the latest iTunes software before starting the iPad update process.

  • Can receive but not send emails in Outlook 2010 - error message 0x8DE000006 The operation failed

    I an @outlook.com email in my Outlook 2010 which worked well at first.
    It now come up with the error message - error message 0x8DE000006 The operation failed and on my Sync Issues it has the following note:
    19:35:57 Error: 3209. Server. We noticed some unusual activity in your Hotmail account. To help protect you, we've temporarily blocked your account.. 
    19:35:57 Contact Support (with the live link which brought me here)
    Which brought me here......any support would be amazing! Thanks

    19:35:57 Error: 3209. Server. We noticed some unusual activity in your Hotmail account. To help protect you, we've temporarily blocked your account.. 
    From this message, it seems that your Outlook.com account is blocked due to some unusual activity. Please first try login to your webmail and check if you can send emails from there. If you can't send email even from webmail, we may try to follow the following
    instructions to unblock your account to resolve the issue:
    http://windows.microsoft.com/en-IN/windows/outlook/account-temporarily-blocked
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • After loading Maverick iTunes will not launch.  I get an error code: -45054.  I am the administrator and have no groups or guests.  Sharing options don't fix this.  Als Fetch will not launch, I get error code: SSL error 9807.  These worked perfectly befor

    After loading Maverick iTunes will not launch.  I get an error code: -45054.  I am the administrator and have no groups or guests.  Sharing options don't fix this.  Also Fetch will not launch, I get error code: SSL error 9807.  These worked perfectly before installing Maverick.  Also everything that loads, all programs, take twice as long to load.  I have MacKeeper and have cleaned and discarded all the garbage. 

    Remove "MacKeeper" as follows. First, back up all data.
    "MacKeeper" is a scam with only one useful feature: it deletes itself.
    Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
    If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
    IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
    In the Finder, select
    Go ▹ Applications
    from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
    ☞ Quit MacKeeper before dragging it to the Trash.
    ☞ Don't empty the Trash. Let MacKeeper delete itself.
    ☞ Don't try to drag the MacKeeper Dock icon to the Trash.

  • When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

    When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

    FRANK M
    What computer operating system is your Premiere Elements 9 running on? I will assume Windows 7, 8, or 8.1 64 bit for now.
    As for the Help Menu/Update way for updating, are you doing that with antivirus and firewall(s) disabled? If not, please do so.
    Do you have the 9.0.1 Update of the program installed? What version of Camera Raw do you have installed?
    Premiere Elements 9 is an older program where you can still do manual installs for that one and only Update. And, Camera Raw for 9 is no longer being updated.
    For the 9.0.1 Update
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
    Camera Raw (last update possible for 9) is 6.5
    Camera Raw-compatible Adobe applications
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
    Please review and consider the above, and then let us know the outcome.
    Thank you.
    ATR

Maybe you are looking for

  • I can't get into the settings for fonts. How do I do that to change the font size?

    I had downloaded the latest updated version of Firefox and I ended up syncing it to my Android phone. I went into some kind of settings dialog and accidentally changed my font and text settings and now I can't read any of my Gmail that's in my accoun

  • Report to Find different between PCR & Schemas

    hi guru's, Can Any tell me the Report to Find different between PCR & Schemas in Two Clients,(For examle from 4.7 to 6.0) Regards, Bala

  • Oracle Collaboration Suite Calendar Portlet

    Hi, I have only oracle calendar installed from OCS 10G. I have seen from documentation that there is a Calendar Portlet available as part of the install. Does anyone know where the calendar portlet is installed, or is there a war or ear file that I c

  • Color Fill Button

    Is there a way to keep the color fill box from changing color each time I select a different cell?  I want it to stay the same color I select no matter which cell I click on.  I love Mac but having to deal with excel at work, I like how it is setup t

  • J2SE 5 - require references

    I'm planning to learn Java and thought going with teh latest J2SE 5 release directly would be a good idea. There are a few nbooks that I've seen on websites but could not et in local bookstalls - may its too early to get them : 1.> Head Start Java -