Send direct print to printer from client, Reports 10G, Windows environment,

We are using windows 2003 based server. Oracle Form and Report Services . Database 10g . Reports 10G.
Trying to send direct print to printer from client side using Destination Parameter : Printer.
I am getting output in pdf at client side. but direct print to printer is failed.

Make sure that the client printer is also known on the application server, since that is where the print job is generated.

Similar Messages

Printing font Barcode3of9 from Crystal Reports XI

I have an issue with printing font Barcode3of9 from Crystal Reports XI utilizing Manhattan Associates Performance Management (PM) UI application.
The font is applied to a field that is converted from a number to a text using the CStr formula in Crystal Reports XI in order to display the value as a barcode.
The barcode on the report is converted successfully in the PM UI 100% of the time. However the business tries to print the report using the print or the export the report functions and the barcode is not converted 100% of the time into a barcode only the value of the field displays.
The font is installed on the server that the business accesses and I have installed the font on the web server for our testing environment, but it still does not aide with fixing the issue.
Does anybody have any experience with this issue?
Thank you

Please contact Manhatten Assoc. for supporting their software.

Pass the file id or a parameter from a report (10g) to the distribution.xml

Is there any way to pass the file id or a parameter from a report (10g) to the distribution.xml file?

Hi,
Please review article ID 273960.1 on metalink.
The article actually describes an issue one may run into while enabling a reports distribution xml file to accept dynamic values, but you can extract the answer you're looking for by studying the above mentioned note.
Best Regards and Good Luck,
Mircea.

SQL Developer BRIDGE command from command line on Windows environment

Is it possible to call SQL Developer BRIDGE command from command line on Windows environment?

Hi <please supply your name>,
SQL Developer Worksheet is not available from the command line.
The BRIDGE command is only supported in the Worksheet.
Its an interesting idea though. Are you trying to script data move from a non Oracle database to an Oracle database using the BRIDGE command?
The BRIDGE command was initially done to allow a simple data move from a non Oracle database to Oracle. We then build the "Copy to Oracle" feature out of it.
http://dermotoneill.blogspot.com/2010/11/cross-database-bridge-statement.html
http://dermotoneill.blogspot.com/2010/11/copy-to-oracle.html
Since the BRIDGE command references connection names, which have to be defined in UI of SQL Developer any solution to run this on the command line would have to work this out.
There are number of ways you can do this without using the BRIDGE command.
1) Perform a capture/convert of your non Oracle database and then generate the "offline" data move scripts.
Theses scripts use SQL*Loader and your non Oracle database tool (Ex: Sybase BCP).
These are run from the command line and can be modified ....
2) Use a database link from your Oracle database to your non Oracle database and reference /query the data that way.
I would interested to hear your thoughts.
Regards,
Dermot
SQL Developer Team.

How can I print PDF attachments from ABAP report in transaction ME23N?

Hi,
Users attach PDF files using "services for objects" in transaction ME23N.
How can I print the PDF attachments from ABAP report ?
Thanks in advance,,

Hi,
check this link,this might help you to solve your problem
/people/thomas.jung3/blog/2005/04/28/setting-up-an-adobe-writer-for-abap-output
Regards
Kiran Sure

Printing over internet from mobile network and windows

Hello. I have two kids living with their mother half of the time. They often needs to print things for their studies. How can I set up my print-server so they can print from their mothers computer. It's a win xp machine with mobile network. I have the printer shared with samba and I'm running an Apache server with a DynDNS IP-adress.

if everything (samba) is configured correctly, the printer should just show up on the network and can be added from the control panel->add printers wizard. you will probably have to install the printer drivers on the client (your kids) computers, which if you don't have the disk are normally available from the manufacturers website.
Last edited by Cyrusm (2010-09-13 17:52:42)

Cofiguring & sending email with attachment from Oracle Report 10g

I want to run report from Oracle 10g reports to be sent as email attachement to differnt people with their respective personal content.
The first problem is to know how to configure Oracle reports 10g to be able to send output to email address.
The second problem is to be able to route seperate pages of the report to seperate email address.
Thanks to all.

For configuring email for reports
http://download-east.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#sthref472
For sending the output to different mail id's you can use bursting and distribution feature of Oracle Reports. For details,
http://download-east.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_dist.htm#i1007338

Calling a report from a report (10g)

Hi
I am using DeveloperSuite 10g and Application Server 9.0.4 - I am trying to call a report from another report.
I believe I am correct in thinking that as buttons don't exist in reports any more I have to use a hyperlink containing the URL to the reports service with appropriate parameters to invoke the required report.
My problem is that when I click on the hyperlink I do not see the called report, but get an html screen saying "Oracle Report Status - Successfully run".
My hyperlink is formed like this:
/reports/rwservlet?module=reportb.rdf
Is there an additional parameter I must pass to get the report to display on the client browser window?
Thanks

Hi,
Can someone let me know as to what the maximum length of the URL string that could be formed? I believe in IE browser a maximum of 64,000 characters can only be formed. If I need to pass many parameters and the length of the values passed exceeds the default length in IE, the rest of the values will not be captured in the report server.
Please let me know on how to proceed with this problem.

How to upgrade froms and reports 10g to froms,Repor 11g on weblogic server

I need to setup a test environment to upgrade Oracle Developer Suite (Forms and Reports 10g) and Oracle BI (Discover) to weblogic. We are using Oracle 10g.
What software I need to install and and in which order? Help will be highly appreciated. Thanks

Hi,
You can find many articles on oracle site for this subject.
However in brief following are the steps
1) Create a directory source,executables,images,reports and logfiles.
2) Copy all your forms, menus and pll's in source directory
3) All your images in your image directory
4) All your reports in reports directory
5) All yuor fmx,mmx and plx in executables directory
6) Any log files in logfiles directory
7) Add path of images and executables directory in FORMS_PATH in default.env
8) Configure your formsweb.cfg as your need.
9) Configure report.conf and rwservlet.properties according to your applications.
10) Make jar of icons say myicons.jar.
11) copy myicons.jar in forms/java directory
12) Check yuor form services if they are running or not.
13) Invoke the URL in internet explorer
http://<ip_address>:<port_no>/forms/frmservlet?form=testform.fmx
I think that's enough from my side.. For more info you can go through the documentation.
Regards
Anuj

How can I print some pages from multipage report

Hello,
I have created a multipage report in word. I would like the user to be able to print the pages selected (as in word printing: pages: 1, 2-3);
I am using Office 2007 pro, the LabVIEW Report Gen Toolkit, LabVIEW 2009, and Windows XP.
I used the suggestion in thread:
http://forums.ni.com/t5/LabVIEW/How-can-you-print-a-single-page-of-a-multipage-report/m-p/155233 , modifying the print VI that comes shipped with LabVIEW: NI_ReportGenerationToolkit.lvlib:Word_Print.VI.
first of all I put two integer constants on "From" and "To" in the Invoke node (PrintOut), but Labview return an error:
Error 1015 occurred at NI_ReportGenerationToolkit.lvlib:Word_Print.vi -> NI_Word.lvclassrint Report.vi -> print2.vi
Then I searched for PrintOut Method in word 2007 Reference guide, and I saw that for using From and To the Range field must have the string wdPrintFromTo;
I insert wdPrintFromTo string in RANGE Field and tryed.... same error......
After that I change approach; removed all constants and used the field Pages; I put a string "1-2" connected to this field and now the printer respond, but all pages was printed!
What's wrong?
many thanks
Attachments:
print2.vi ‏18 KB
parte comune.doc ‏43 KB

Thanks, Alex!
ok, I try first approach in print4.vi, but Labview return an error (view jpg); if I cut From, To controls, the VI print all pages. The same things happen also if I trasform I32 in Variant.
I don't try second approach, because at this time I have only one report
I try also with VB macro: this is better (print3.vi) but.....if I use:
Sub Print_Pages_From_To()
ActiveDocument.ActiveWindow.PrintOut Range:=wdPrintFromTo, From:="2", To:="3"
End Sub
is ok; print the pages selected; if I use:
Sub PrintPages()
ActiveDocument.ActiveWindow.PrintOut Pages:="2-3"
End Sub
printer print all pages.
what do you think?
regards,
Italo
Attachments:
print Problem.jpg ‏39 KB
print4.vi ‏19 KB
print3.vi ‏19 KB

Print PDF documents from a report

Hello all,
I need to print a PDF document residing on my hard drive(without actually opening the document, just a print) from a custom ABAP report. Any ideas how we can do this? Can we do this with OLE's? Sample code is appreciated.
Thanks,

Hello,
Thanks for the response. The link you provided shows how to write output to PDF and print. All I need to do is print some external PDF document resisding on my hard drive through some code in my custom report.
Any ideas on this? Thanks.

Print Word File from Oracle Report Builder 6.0

Dear All
I am using Reports 6 , I have a requirement that i have to print a word document (somewhere around 8 to 9 pages) after printing a report is there any way to execute the same. The word file has the details like agreement , etc so each and every time when i print that particular report , i want to print the contents also which is there in word file. If possible please tell me the steps to do. Thanks in Advance.
V.Sat

Possibilities are a bit limited. You can embed a word file as an OLE object in Reports.
However, OLE can only display one page. So, you have to split your original documents in several one page documents. Put each page in a separate OLE field.
You can also put the OLE pages (again, single pages only) in a BLOB in the database. In a query you select the pages from the BLOB.
You have to store the pages through Forms, though. You cannot simply upload them to the table through pl/sql.

Print problem in Forms y Reports 10g via OAS

Hello:
I am using 10g Reports and Forms10G and when command to print any report compelled me OAS calls passing through and I register with a user connection to lift the printing service. how to fix this problem?

hi
you have to install arabic language,modify registry something like this for all NLS_LANG in oracle Homes..
AMERICAN_AMERICA.AR8MSWIN1256and also check your database characterset. it should be AL32UTF8.
select * from NLS_DATABASE_PARAMETERS
where PARAMETER='NLS_CHARACTERSET';SARAH

Problem to send text file to mail from ALV report

Hi Friends,
I have a problem in my ALV report with text file. As per the requirment, when we execute the program then text attachment should go to the particual email.
When i am using file type as XLS i am getting attachment with all 4 recoreds( input for 4 records) in mail. But all 4 records are coming in SAME ROW. It should come 4 records in 4 rows. when I use file type as TXT and separated by pipe symble in code, it is showing only one recored for same above input.
When i use file type as XLS and click the attachment in email, it will triggire one popul with three options like SAVE, OPEN, CANCEL.
But when i click on text file attachment, it is directly showing ony one recored.
Please correct me on this.
my code is
PERFORM send_file_as_email_attachment
                               tables i_message
                                      i_attach
                                using v_email
                                      'User last log on details'
                                      'XLS'
                                      'User log on list'
                             changing v_error
                                      v_reciever.
FORM send_file_as_email_attachment tables pi_message
                                          pi_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: l_error    TYPE sy-subrc,
          l_reciever TYPE sy-subrc,
          l_mtitle LIKE sodocchgi1-obj_descr,
          l_email LIKE somlreci1-receiver,
          l_format TYPE so_obj_tp ,
          l_attdescription TYPE so_obj_nam ,
          l_attfilename TYPE so_obj_des ,
          l_sender_address LIKE soextreci1-receiver,
          l_sender_address_type LIKE soextreci1-adr_typ,
          l_receiver LIKE sy-subrc.
l_email   = p_email.
l_mtitle = p_mtitle.
l_format              = p_format.
l_attdescription      = p_attdescription.
l_attfilename         = p_filename.
l_sender_address      = p_sender_address.
l_sender_address_type = p_sender_addres_type.
Fill the document data.
v_doc_data-doc_size = 1.
Populate the subject/generic message attributes
v_doc_data-obj_langu = sy-langu.
v_doc_data-obj_name = 'SAPRPT'.
v_doc_data-obj_descr = l_mtitle .
v_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR v_doc_data.
READ TABLE i_attach INDEX v_cnt.
v_doc_data-doc_size =
     ( v_cnt - 1 ) * 255 + STRLEN( i_attach ).
v_doc_data-obj_langu = sy-langu.
v_doc_data-obj_name   = 'SAPRPT'.
v_doc_data-obj_descr = l_mtitle.
v_doc_data-sensitivty = 'F'.
CLEAR i_attachment.
REFRESH i_attachment.
i_attachment[] = pi_attach[].
Describe the body of the message
CLEAR i_packing_list.
REFRESH i_packing_list.
i_packing_list-transf_bin = space.
i_packing_list-head_start = 1.
i_packing_list-head_num = 0.
i_packing_list-body_start = 1.
DESCRIBE TABLE i_message LINES i_packing_list-body_num.
i_packing_list-doc_type = 'RAW'.
APPEND i_packing_list.
Create attachment notification
i_packing_list-transf_bin = 'X'.
i_packing_list-head_start = 1.
i_packing_list-head_num   = 1.
i_packing_list-body_start = 1.
DESCRIBE TABLE i_attachment LINES i_packing_list-body_num.
i_packing_list-doc_type   = l_format.
i_packing_list-obj_descr = l_attdescription.
i_packing_list-obj_name   = l_attfilename.
i_packing_list-doc_size   = i_packing_list-body_num * 255.
APPEND i_packing_list.
Add the recipients email address
CLEAR i_receivers.
REFRESH i_receivers.
i_receivers-receiver = l_email.
i_receivers-rec_type = 'U'.
i_receivers-com_type = 'INT'.
i_receivers-notif_del = 'X'.
i_receivers-notif_ndel = 'X'.
APPEND i_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = v_doc_data
            put_in_outbox              = 'X'
            sender_address             = l_sender_address
            sender_address_type        = l_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = v_sent_all
       TABLES
            packing_list               = i_packing_list
            contents_bin               = i_attachment[]
            contents_txt               = i_message
            receivers                  = i_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
l_error = sy-subrc.

Hi,
declare the following constant in u r program and concatenate at the end of each and every record in your internal table.
CONSTANTS : LV_CRLF TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF.
for eg.
if u internal table has values like
row1
row2
row3
concatenate the 1st record lv_crlf into first record.
conactenate second record lv_crlf into second record.
concatenate third record lv_crlf into third record.
now attach the internal table to the FM which u use for sending email. Each and every row will come in new line. The LV_CRLF will hold nothing but a line feed character (#).
Hope it will solve u r problem
Regards,
Rose.

Can't Print to PDF from any application in Windows 8 with Acrobat V8

Can anyone help me? Adobe doesn't prvoide support for Acrobat 8 anymore. I used to be able to print to Adobe PDF from other applications before I upgraded to Windows 8. Now it never works, just gives me an error message that says "printer is in error state." I am using Acrobat V8.0.0. Thank you for any help you can give.

Acrobat 8 is not compatible with Windows 8, so such errors are to be
expected.

Send direct print to printer from client, Reports 10G, Windows environment,

Similar Messages

Maybe you are looking for