Send info. to email address in Flash

Hi
I'm creating a site that must contain a page where the user
must enter their email address which is then forwarded to the site
owner's email address.
They must enter this to access a certain section of the site.
I've only been able to find a tutorial that shows you how to
send info. to an email address that the user inputs themselves.
Any help would be much appreciated.
Cheers

Use the LoadVars and send method which sends variables to a
server side
script (CFM, PHP, ASP, CGI or Perl) which processes the email
and then sends
it to the correct location.
Dan Mode
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
"Dilroy" <[email protected]> wrote in
message
news:ea5blr$99p$[email protected]..
> Hi
> I'm creating a site that must contain a page where the
user must enter
> their
> email address which is then forwarded to the site
owner's email address.
> They must enter this to access a certain section of the
site.
> I've only been able to find a tutorial that shows you
how to send info. to
> an
> email address that the user inputs themselves.
> Any help would be much appreciated.
>
> Cheers
>

Similar Messages

How send SMS to email address - can't fnd "@"

On my other phones I have had I can specify an email address as the recipient of an SMS message. I can't figure out how to do that on the iPhone if the recipient's email address is not already saved as my contacts, mainly because I cannot find the symbols like @ and . that are needed for an email address. I would like to know how to type in an email address on the fly in the "To" of an SMS message.
Thanks!
Jenn

Also to clarify a bit more. Your old phone actually never did send a SMS to an email address. SMS can only go to numbers (phone numbers or special numbers like American Idol uses for voting). That is just how the protocol works.
What your old phone did was mix SMS and MMS together and allowed you to enter an email because MMS allows email addresses. Thus you were really sending an MMS (even if you didn't include a picture and just put text).
So, this is why the iPhone since the SMS app is just for SMS only allows the characters it allows for the SMS protocol. If you want to send to an email address, you will have to use your email program.

Need my conformation details send to my email address please

I order a all in one officejet pro 8610 printer but i order it over the phone and the representitive who made the ordr put in the wrong email address and I Need my conformation details send to my email address but the thing is once I've made the purchased and the order is ship I cannot fix my email from there so I need to know what I can do to change my email address and for them to send my conformation details to me. please help thanks

Call AppleCare & ask to talk to "Account Security". Contact numbers here:
http://support.apple.com/kb/HT5699?viewlocale=en_US

HT5557 since i updated my Apple ID with correct email address I can now only send imessages to email addresses and not iphone numbers - any idea how to fix this problem ?

since i updated my Apple ID with correct email address I can now only send imessages to email addresses and not iphone numbers - any idea how to fix this problem ?

You might want to try contacting Apple for assistance by going to https://expresslane.apple.com, then click See All Products and Services>iTunes>iTunes Store>Passwords & Security Questions>Lost or Forgotten Apple ID password. They should be able to explain what's going on and help you reset the password for the old ID if necessary. The call should be free.

HT201363 I am trying to reset my security questions but it won't send to my email address

I am trying to reset my security questions but it won't send to my email address

If you already have a valid rescue email address, send the email to it, wait a few hours, and check the spam filter. If you don't, use the instructions in that article to contact Apple as if you had one security question and lost the Apple ID password.
(88619)

My outlook is sending two invites in the icloud calandar. How can I stop this? I ony want the email send with my email address not the apple email

My MS outlook on the PC is sending two invites in the icloud calandar. How can I stop this? I ony want the email send with my email address not the apple email.

My phone is the 4. Not the 4s. And I went there but it's nowhere the option to delete from server.
I only see: ask before deleting and it's on.

Send Form Info To Email Address

I was wondering if someone could point me in the direction of
a tutorial that explains how to build a form that sends the
information captured to an email address.
Thanks!

I was wondering if someone could point me in the direction of
a tutorial that explains how to build a form that sends the
information captured to an email address.
Thanks!

How do I edit Send button designated email address on a web form in Dreamweaver CS6?

I have a webform on our website for folks requesting information. There is a country button which folks select. The send button submits the form and there is some script somewhere that sends submissions from say a USA based enquirer to a USA email address, UK based enquirer to a UK address, etc. How can I edit the script that controls that function? I am a newbie in CS6 but am learning fast!

Hi Fritz
In the source code I have:
<td height="30" colspan="2"><div align="center">
                  <input type="submit" value="Send" />
              </div></td>
            </tr>
          </table>
        </form>
If I click on </form> in Properties the action box shows an asp file /gdform.asp on the root. I opened that and it has no site specific info, i.e. my URL or any email address.
The webform can be viewed on www.aboutmeco.org/opportunities/index.html   Ther you see the Send button is at the bottom of the webform, which corresponds to the source code.   Do you think I am looking at the right form tag?
Stephen

I am trying to reset my security questions, however the reset security info to email address is not available to me

I am trying to reset my security questions, however the send reset security info to email option is not available to me.
Anyone know how I can fix this please.

The option to send reset info only shows if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. As you aren't getting the option then that implies that you don't have a rescue email address, and you won't be able to add one until you can answer 2 of your questions - so you will need to contact iTunes Support or Apple to get the questions reset : https://discussions.apple.com/docs/DOC-4551
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Problem sending to AOL email addresses from SBS2003 Exchange

Hi All,
I have a problem with a SBS2003 server with Exchange. They can't send emails to AOL email accounts ... they have tried 3 different email addresses and the response they get is
From: System Administrator
Sent: 03 December 2014 12:22
To: [removed]
Subject: Undeliverable: Fwd: Window
Your message did not reach some or all of the intended recipients.
Subject: Fwd: Window
Sent: 01/12/2014 12:15
The following recipient(s) cannot be reached:
[removed]@aol.com on 03/12/2014 12:22
Could not deliver the message in the time limit specified. Please retry or contact your administrator.
<[removed].co.uk #4.4.7>
I don't think they have ever been able to send to AOL but has recently become an issue as they have customers with AOL email accounts ...
Any ideas? I have checked blacklists and we aren't on there ... they can email everyone else without a problem.
Many thanks,
Graham.

It is the same issue when they reply to an aol email address. The recipients have been called to check they haven't received it and they haven't.
More details are as follows:
---------- Forwarded message ----------
From: System Administrator <[email protected]>
To: name <[email protected]>
Cc:
Date: Fri, 12 Dec 2014 10:51:25 -0000
Subject: Undeliverable: Windows
Your message
To: [email protected]; [email protected]
Subject: Windows
Sent: Wed, 10 Dec 2014 10:28:36 -0000
did not reach the following recipient(s):
[email protected] on Fri, 12 Dec 2014 10:51:24 -0000
Could not deliver the message in the time limit specified. Please
retry or contact your administrator.
<sendingdomain.co.uk #4.4.7>
[email protected] on Fri, 12 Dec 2014 10:51:24 -0000
Could not deliver the message in the time limit specified. Please
retry or contact your administrator.
<sendingdomain.co.uk #4.4.7>
Final-Recipient: RFC822; [email protected]
Action: failed
Status: 4.4.7
X-Supplementary-Info: <sendingdomain.co.uk #4.4.7>
X-Display-Name: [email protected]
Final-Recipient: RFC822; [email protected]
Action: failed
Status: 4.4.7
X-Supplementary-Info: <sendingdomain.co.uk #4.4.7>
X-Display-Name: [email protected]
This was actually sent to two aol.com email addresses but the response is the same as if sent to just one. There isnt much more here than in the other one though...
Thanks
G

553 errors sending to some email addresses, not others

Hi! I have several complaining companies who can't send emails to some domains, others are ok.
I have confirmed that each or these use <providername>.blackberry.net as the return address. These are the only ones affected. I have removed the Cmime service book entries on my Blackberry and resent, with no affect on the problem. I can send to these domains with a different return (from) address. The exact error is: 5.1.0 Unknown address error
553-"Requested action not taken mailbox name not allowed". The message never is seen by the destination server.
The interesting part is I can send to other domains with the blackberry.net zone, without this error. Can you shed some insight here?

The contacts are in MobileMe, but they are the same as in the phone, i.e., no email addresses.
So the answer to my question - is all contact info available in your MobileMe online address book is no?
I have tried syncing with Outlook 2007 and gave up - something as simple as phone number labels I have with the Address Book and iPhone such as "Main" for a phone number didn't compute with Outook - which is a garbage application IMO. I switched to using Windows Contacts for syncing contact info. A little better but with Windows Contacts, you can't have a company name designation only - Windows Contacts wants to place the company name as a first and last name in addition to the company name only, which I haven't been able to stop. I finally gave up trying to keep Outlook or Windows Contacts automatically synchronized with MM. If I want to add contact info or any changes, I have MM replace all contact info instead of automatically synchronized.

When I try to go to the photo gallery to choose a picture to send to my email address by using my Iphone it can't send or receive messages. Yahoo password is being asked which I have forgotten. How can I correct this?

With my my I phone as I try to choose a picture from the photo gallery to send it via email using my Iphone, I can't seem to send nor receive messages anymore. It is asking for my yahoo password. What password will that be as I have forgotten it. I know what my personal password on my yahoo address when I go to a regular laptop or desktop but with Iphone I am unable to to retrieve this password because it does not give you an option to change a password. What shall I do to correct this problem?

It's the same password. Go to settings - mail - yahoo - enter the password for your incoming and outgoing mail server.

How do i always send from one email address, even when replying?

Hello all
I just moved to MAIL after 12 years of Eudora.
I’m MAIL 2.1.3 in Mac OS 10.4.11 PPC.
my problem
People send emails to me at 2 different email addresses. Both of them are stored on two different servers, and thus two different POP setups. Let us call them Eunice.net and Poppy.net
I have MAIL setup to pull my emails off both different servers. I think it would be best to always send emails from one particular email address, ([email protected]) using the one particular email POP server. (Eunice.net)
My problem is that when I get an email sent to me at Poppy.net, want to hit reply and have it go out by way of the Eunice.net SMPT (POP) server (and with the return address as [email protected]
The problem is that I can’t find a way to configure my Preferences/Accounts to make this happen. As of now, I hit reply to an email sent to [email protected]… and it tries to send the email out via Poppy.net (and fails) - i get an error messsage.
Thanks for any help!

Mail, Preferences, Composing, Send New Mail from is indeed set properly - so this is why i'm baffled.
Note that this setting is "Send New Mail from", in other words, when you create a New message, not Reply to an existing message. When you create a new message, does it do send from the specified account? Note that this will only work if no message is selected, else it will create the new message using the account of the selected email (assuming Mail can figure out the account from the header).
The following is copied from the Mail help (note how it handles New messages and Replies differently):
*+How is the "From" address determined in a new message or a reply?+*
+Mail will try to determine the correct "From" address to use when you compose a new message or reply to a message.+
*+When you compose a new message, the From address is selected in the following order:+*
+If a message is currently selected, Mail uses the account the message belongs to, if it can be determined from the headers of the message, or by the IMAP mailbox the message resides in.+
+If an IMAP mailbox is currently selected, Mail uses the account the IMAP mailbox belongs to.+
+If no message or mailbox is selected, Mail uses the email address for the first account listed in the Accounts pane of Mail Preferences.+
*+When you reply to a message, the From address is selected in the following order:+*
+The To and Cc fields are compared to email addresses you have set up in Mail Preferences. Mail uses the first matching address it finds as the reply address.+
+If the message is in an IMAP mailbox, Mail uses the email address for the account the mailbox belongs to.+
+If all else fails, Mail uses the email address for the first account listed in the Accounts pane of Mail Preferences.+
One way to ensure that the messages are sent using the Eunice.net SMPT (POP) server is to set that server as the SMTP server in your Poppy mail account (putting your Eunice settings in the SMTP server settings dialog). That won't address the ReplyTo issue (although you can set that manually in the ReplyTo field, accessed via the button next to the subject line).
Hope this helps...

How do I send from different email address

I would like to use a clients email address when I send out thier survey form. It is more recognizable and less likely to get caught is spam filter compared to using my email address.

Thanks for your response. I am using the distribution function within FormsCentral. I guess what you are saying is that if I send my email invite (with link to the FormsCentral form) and my email client supports using a different "from" address then I am good to go. The alternative I was thinking about was changing my user credential/email address for this one project so this different email address was used…. But this comes with some consequences I am not sure I want to manage.
Doug

Can i send to multiple email addresses for the same contact

I coach a baseball team and I want to create contacts under the kids' names with email addresses for both parents listed. Can I send email to multiple email addresses listed inside the same contact? I hope this makes sense.
Thanks!

You can do it individually, but it can also be done with Groups in Contacts, but you will need to create two or more groups. Once you have created the Groups in Contacts, drag the contacts that have multiple email addresses into each group. Then, select Edit Distribution List… from the Edit menu in Contacts.
For each group, select one address or the other for each contact. Do the same for the other group.
When you address an email, add both Groups to the address field in Mail.

Send info. to email address in Flash

Similar Messages

Maybe you are looking for