Send multiple files in different directories using Receiver File Adapter
Hi Experts,
I have one File to File without ESR scenario where I have to pick multiple files from different directories and to save them in different directories on receiver side.
Can anyne help me to send multiple files in different directories using receiver file adapter.
Is it possible??
Any help will be appreciated.
Regards,
Danish
hi ,
that is possiable without esr,
we need to create one sender communication channel , in that we nend to use "adavnced selection for source file " for sending multiple files from multiple directories.
we need to create 'n' receiver communication channels and 'n' receiver agreements based on communication channels .
in receiver determination, provide multiple receivers
In interface determination , provide * symbol for receiver communication components
thanks,
Similar Messages
-
Save file in multiple directories using receiver file adapter?
Hi,
Is it posible to save file in multiple directories using receiver file adapter?
Regards,
AshishWell, there is a round about way to do that -
The idea is to use multi mapping. 1:n mapping
1) Map ur message to 2 different record set nodes. Since you want to use the same file both the mapping will look exactly the same. make sure that the filepath and filename are a part of the output payload message
2) In the file adapter config. make sure the the file name and file path are from these payload fields. You can use a context object to refer these fields. Voila...the files are created in the 2 direcoties you mentioned.
of course the simplest way is to route the same message to 2 business systems/services and write them out using 2 ccs.,
Arvind R -
Create multiple files in different directories for receiver system
Hi,
My scenario is File-XI-File. Based on a value of a field(1...Unbounded) & its occurance in source file XI needs to create same file number of times(based on occurance of field in source file) in different directories on receiver system(Single Business System).
What different ways/solutions are available to achieve this?
Regards,
Bharat
Edited by: Bharat Rathod on Nov 21, 2009 5:24 PMHi Bharath,
>>Based on a value of a field(1...Unbounded) & its occurance in source file XI needs to create same file number of times(based on occurance of field in source file) in different directories on receiver system(Single Business System).
This logic needs to be handled in message mapping ... and you need to use multimapping..check the link here
http://help.sap.com/saphelp_nw04/helpdata/en/42/f3b31d48fb1bc8e10000000a11466f/content.htm
Regards
Suraj -
How to send the payload to a jsp using receiver Http adapter?
Hi experts,
I have this scenario from Legacy to XI to external app server.I have a test jsp to execute that functionality .Its a jsp which has 1 textarea named "test" and when I click on the submit buton I get a response back.This way I am able to test this independently.Now from XI when I am executing my scenario I am getting status code '1250' and message as ' http request(test) is null'.Now in the scenario in http adapter I just provide the target host : ip of server ,
service number : port no ,
path: the container or the request handler. But this scenario fails and gives me the above erroneous response.Now Basically I am not able to get how to send the value to the textarea "test"? please provide help as soon as possible.Do we have to put the name of the jsp in the "path" in http adapter and use prolog as test=.I tried this but it doesnt work.
Is there any way to check the URL that it forms after appending the querystring in the url ...?
So please provide help on this or suggest a solution to [email protected] as soon as possible.....
Thanx in advance.
Akshatahey Shekhar,
thanx for that prompt reply but I have configured the communication channel in the same manner as suggested by u.
actually I have this jsp page http://xx.xx.xx.xx:8080/abcdef/try/efg.jsp where there is a textarea "test" which has to be filled and there is a submit button.When I test this http client i.e the above jsp page independently then it goes to handler
http://xx.xx.xx.xx:8080/abcdef/trial/ And it gives a proper response message after clicking on the submit button.
now I want to carry out the same using receiver http adapter. I need to pass the value for this inputfield names "test" on that jsp . so right now I have configyured the adapter as
addressing type: url
target host : xx.xx.xx.xx
service no:8080
path : here I have given the path of handler i.e /abcdef/trial I tried giving the jsp page also but logically I guess it should be the handler.
content type: text/xml; charset=iso-8859-1
xml code: UTF-8
Mask special characters (URL escaping) checked.
now since the name of the inputfield is "test" in the prolog I gave test=
But it doesnt work I get this error "http request parameter [test] is null" in the response message which I guess suggests that it is not able to send the value for the field"test" to that handler.Please suggest how to send this and tell me if there are any other configurations that I have to do in the receiver communication channel.
Thanx ,
Akshata -
How to send mails to "CC" and "BCC" using receiver mail adapter dynamically
Hi,
Due to business requirement PI need to send mails dynamically to u201CCCu201D and u201CBCCu201D using receiver mail adapter.
We have an option to send mails to u201CTou201D dynamically, but are there any option to send mails u201CCCu201D and u201CBCCu201D dynamically.
Please some help to resolve the issue. Thanks
Regards,
Sreeramulu Konjeti.Hi Sreeramulu,
As mentioned by Lucas, you can use the UDF. Inn addition to that, you need to define the Variable Headers under Variable transport binding after enabling the Adapter Specific Message Attributes.
For the Enabling ASMA, follow the below steps and check for the variable attributes.
Select the Advanced tab page.
To save adapter-specific attributes in the message header of the XI message, select Use Adapter-Specific Message Attributes and Variable Transport Binding.
The following attributes in the message header are then available for processing:
○ User: (technical name: TServerLocation)
○ Authentication key: (technical name: TAuthKey)
The following mail header fields are available for processing:
○ From: (technical name: THeaderFROM)
○ To: (technical name: THeaderTO)
○ Cc: (technical name: THeaderCC)
○ Bcc: (technical name: THeaderBCC)
○ Subject: (technical name: THeaderSUBJECT)
○ Reference to the mail that is to be replied to: (technical name: THeaderIN-REPLY-TO)
○ Reply to: (technical name: THeaderREPLY-TO)
○ Mail client program: (technical name: THeaderX-MAILER)
○ Send confirmation of receipt: (technical name: THeaderDISPOSITION-NOTIFICATION-TO)
○ Priority: (technical name: THeaderPRIORITY)
○ Importance of message: (technical name: THeaderIMPORTANCE)
To transfer further header fields, set the relevant indicator for Variable Header. The technical names for the fields are XHeaderName1, XHeaderName2, and XHeaderName3.
The parameters are included in the mail header under the names specified here.
The attribute namespace for the adapter is http://sap.com/xi/XI/System/Mail.
Thanks, -
How to read multiple files of different name using single file adapter
There are two inbound locations inbound1 and inbound2 , and the files structure present in these two inbound locations are same but the files start with different names example
(1)files in inbound1 starts with file1,file2...
(2)files in inbound2 starts with abc1,abc2...
by using same file adapter with read option how can i read both files....Hi K.A.N.N.,
You can define multiple directories using the above link in 11g and poll for the file as \*.*.
Alternatively you can use the Synchronous Read and specify the file name at runtime.
You can also use Pick activity to define multiple branches each with a File Adapter to read from a specified location with specified file name. Although it would contain multiple Adapter Definitions at Development-time, only one of the Adapters will execute at Run-Time.
Regards,
Neeraj Sehgal -
Multiple files in different directory using single FILE adaptor
Hi Guys,
How can we handle multiple files having different format(PDF,TXT,EXCEL) and in different directory with the single FILE adaptor.
I know by using "." we ca get mutilple files, but here tthe files are of different format and in different directory.
Could you please explain as to how we can handle this scenarios?
Thanks
SahilHi,
The short answer is - "No".
The Long Question - "Why do you want to use a SINGLE channel".
If your idea is to reuse the interface then dont worry... Except for the Senderchannel and Sender agreement all your other objects can be reused ...provided your sender apter converts the different files into the same XML format..
For TXT you can use the simple file adpater..
For excel see if you can use save the file as .CSV format...then you can use it directlky by the simple FIle adapter..
For PDF use conversion agent... Here a blog to get u started on that ->
/people/shabarish.vijayakumar/blog/2009/05/17/trouble-writing-out-a-pdf-in-xipi
regards
Arvind R -
How to configure a scenario which posts same file to different directories
How to configure a scenario which posts same file to different directories of a receiving system?
Consider an Idoc to file scenario where I have to post same file to two different directories but logical receiver system has to be same.Hi,
You can try out like this: Using multiple receiver interfaces you can send it to multiple directories with the help of enhanced interface determination/conditions and with the help of multiple receiver communication channels.
Another option is to copy the file from one target directory into another directory with the help of Unix script by executing the same from the OS command level.
One more option is to create a Java Server Proxy and inside the proxy, you can write java code to FTP into different locations.
Hope this helps,
Regards,
Moorthy -
How to include header files from different directories?
Hi,
Sorry for the newb question, but I can't figure this out. I'm trying to compile a simple piece of code (C++) that uses header files in a directory different from the Project directory; header files are in /opt/csw/postgresql/include/pqxx. I've tried a few different things, adding that directory to the include directives under Resource Files, add existing files from a folder, etc etc. Whenever I try to build, dmake bails with status -1. I can't seem to get this working, can someone explain how to use header files from different directories?
Thanks,
SlowToadyHeader files are usually specified relative to a base directory. If the base directory is not a system directory -- /usr/include or the compiler installation directory -- add a command-line directive
-I path/to/base/dirfor each such directory.
The path can be absolute, such as
-i /opt/csw/postgresql/includeor relative, such as
-I ../../my/includeIn your source code, specify the header file relative to the base directory, and be sure to use quotes, not angle brackets. Example:
#include "header.h" // right
#include <header.h> // wrongThe angle brackets are used for system headers, like <iostream> or <stdlib.h>.
The rules above are common to all compilers on Unix and Linux, and generally to all C and C++ compilers.
For more details, read about the -I option in the C++ Users Guide. You can find the guide by pointing your browser to the "docs" directory in the compiler installation, or go here:
http://docs.sun.com/app/docs/doc/819-5267
All command-line options are described in Appendix A. -
How to send multiple customer statements by email using RFKORD11
Hi All,
How to send multiple customer statements by email using RFKORD11 program.
As of now we copied the stanadard program and sending the customer statements by email, one by one.
if i execute the z program it will show the customer statement and send mail option.
if i click send mail it will send that customer statement to the corresponding customer.
then again i need to click back, it will show next customer statement and click on send mail.
Pl guide me, if any one worked on this program.
Regards,
MaheshHi .
You first need to copy that program to Z and make the changes in it. Can you convert sapscript to smartform?
then you can write a logic to send mail in the loop.
to send the pdf file
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/mailsendthroughoutputcontrols
Regards,
Madhuri
Edited by: madhuri sonawane on Jun 10, 2009 4:20 PM -
Hi
In my scenario,we are sending plain request to web service using receiver sender adapter and PI will receive response as excel attachment. What are standard module required to achieve this and sequence? or checking Keep attachment box will help us to achieve this?
is it possible to receive excel sheet as attachment from receiver soap adapter ?
Thanks in AdvanceHi,
This issue might be due to the invalid .pem certificate file.
Make sure to include the beginning and end tags on each certificate.
The result should look like this:
-----BEGIN CERTIFICATE-----
(Your Primary SSL certificate: your_domain_name.crt)
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
(Your Intermediate certificate: DigiCertCA.crt)
-----END CERTIFICATE-----
For more detailed information, you could refer to:
https://www.digicert.com/ssl-support/pem-ssl-creation.htm
Regards -
Send multiple records to rfc without using BPM
Dear Experts,
Could you please help on the following scenario.
I need to send multiple customer master data records from a file to rfc without using BPM.
The following is the mapping i am using
source Target( RFC)
====== =============
Tree occurance type Tree occurance
cust_mt 1..1
customer 0..unbound -
> ztest_cust( rfc ) 1..1
cname 1..1 -
> cname 0..1
cno 1..1 -
> cno 0..1
bank -
> bank 0..1
item : 0..unbound
code -
> code 0..1
name -
> name 0..1
location -
> location 0..1
1. Multiple banks possible for one customer
2. Multiple customers possible in datafile from mdm
Problem 1:Only one customer record from file is being sent to RFC thouth many records are in the file, the second, third .. and so on records not being sent to rfc.
Problem 2:
if add o.. unbound for the rfc occurance, <messages>,<message1> tags are getting added in message mapping, and no single customer record sent to rfc..
Your help is rewarded with good points.
Appreciate your help.
Thanks.
sravya.Hi VJ,
Thank you for the immediate reply.
one more thing, when i tried to change the occurences of ztest_cust( rfc) to 0..unbound,
I am not seeing the occurances updated in the imported rfc structure.
The following is the wsdl for rfc, could you please help me to add occurances 0..unbound.
Thanks a lot.
sraya.
<?xml version="1.0" encoding="ISO-8859-1"?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:rfc="urn:sap-com:document:sap:rfc:functions" name="ZTEST_CUST" targetNamespace="urn:sap-com:document:sap:rfc:functions">
<wsdl:documentation>
test for mdm
</wsdl:documentation>
<wsdl:types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions">
<xsd:element name="ZTEST_CUST">
<xsd:complexType>
<xsd:all>
<xsd:element name="CNAME" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CNO" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="BANK" minOccurs="0">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" type="ZST_CUST" minOccurs="0" maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
<xsd:element name="ZTEST_CUST.Response">
<xsd:complexType>
<xsd:all>
<xsd:element name="BANK" minOccurs="0">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" type="ZST_CUST" minOccurs="0" maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="ZST_CUST">
<xsd:sequence>
<xsd:element name="CODE" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="60" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="NAME" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="60" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LOCATION" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="60" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ZTEST_CUST.Input">
<wsdl:part name="parameters" element="rfc:ZTEST_CUST" />
</wsdl:message>
<wsdl:message name="ZTEST_CUST.Output">
<wsdl:part name="parameters" element="rfc:ZTEST_CUST.Response" />
</wsdl:message>
<wsdl:portType name="ZTEST_CUST.PortType">
<wsdl:operation name="ZTEST_CUST">
<wsdl:input message="rfc:ZTEST_CUST.Input" />
<wsdl:output message="rfc:ZTEST_CUST.Output" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="ZTEST_CUST.SAPBinding" type="rfc:ZTEST_CUST.PortType">
<rfc:binding style="rfc" />
<rfc:type name="ZST_CUST">
<ifr:container xmlns:ifr="urn:sap-com:ifr:v2:metamodel" xmlns:xlink="http://www.w3.org/1999/xlink">
<ifr:descriptor>
<ifr:description language="EN">
test
</ifr:description>
</ifr:descriptor>
<ifr:properties>
<ifr:sourceSystem />
<ifr:sourceClient>
020
</ifr:sourceClient>
<ifr:release>
640
</ifr:release>
<ifr:category>
structure
</ifr:category>
<ifr:unicode1>
true
</ifr:unicode1>
<ifr:unicode2>
true
</ifr:unicode2>
<ifr:isFlatStructure>
true
</ifr:isFlatStructure>
</ifr:properties>
<ifr:definition>
<ifr:internalLength1>
180
</ifr:internalLength1>
<ifr:internalLength2>
360
</ifr:internalLength2>
<ifr:fields>
<ifr:field name="CODE" category="simple">
<ifr:descriptor />
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:offset1>
0
</ifr:offset1>
<ifr:offset2>
0
</ifr:offset2>
</ifr:properties>
<ifr:definition>
<ifr:scalarType>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
60
</ifr:length>
<ifr:internalLength1>
60
</ifr:internalLength1>
<ifr:internalLength2>
120
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
</ifr:field>
<ifr:field name="NAME" category="simple">
<ifr:descriptor />
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:offset1>
60
</ifr:offset1>
<ifr:offset2>
120
</ifr:offset2>
</ifr:properties>
<ifr:definition>
<ifr:scalarType>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
60
</ifr:length>
<ifr:internalLength1>
60
</ifr:internalLength1>
<ifr:internalLength2>
120
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
</ifr:field>
<ifr:field name="LOCATION" category="simple">
<ifr:descriptor />
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:offset1>
120
</ifr:offset1>
<ifr:offset2>
240
</ifr:offset2>
</ifr:properties>
<ifr:definition>
<ifr:scalarType>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
60
</ifr:length>
<ifr:internalLength1>
60
</ifr:internalLength1>
<ifr:internalLength2>
120
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
</ifr:field>
</ifr:fields>
</ifr:definition>
</ifr:container>
</rfc:type>
<wsdl:operation name="ZTEST_CUST">
<ifr:container xmlns:ifr="urn:sap-com:ifr:v2:metamodel" xmlns:xlink="http://www.w3.org/1999/xlink">
<ifr:descriptor>
<ifr:description language="EN">
test for mdm
</ifr:description>
</ifr:descriptor>
<ifr:properties>
<ifr:sourceSystem />
<ifr:sourceClient>
020
</ifr:sourceClient>
<ifr:release>
640
</ifr:release>
<ifr:package>
$TMP
</ifr:package>
<ifr:akhNode />
<ifr:released>
external
</ifr:released>
<ifr:outbound>
false
</ifr:outbound>
<ifr:synchronous>
true
</ifr:synchronous>
<ifr:asynchronous>
false
</ifr:asynchronous>
<ifr:unicode1>
true
</ifr:unicode1>
<ifr:unicode2>
true
</ifr:unicode2>
</ifr:properties>
<ifr:definition>
<ifr:parameters>
<ifr:parameter name="CNAME">
<ifr:descriptor>
<ifr:description language="EN">
Character Field Length = 10
</ifr:description>
</ifr:descriptor>
<ifr:definition>
<ifr:scalarType name="CHAR10">
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:fixedValuesListDefined>
false
</ifr:fixedValuesListDefined>
<ifr:mixedCaseSupported>
false
</ifr:mixedCaseSupported>
<ifr:signedNumber>
false
</ifr:signedNumber>
</ifr:properties>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
10
</ifr:length>
<ifr:internalLength1>
10
</ifr:internalLength1>
<ifr:internalLength2>
20
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
<ifr:outputLength>
10
</ifr:outputLength>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
<ifr:properties>
<ifr:direction>
in
</ifr:direction>
<ifr:class>
import
</ifr:class>
<ifr:type>
scalar
</ifr:type>
<ifr:optional>
true
</ifr:optional>
<ifr:basedOnDictionaryReference>
true
</ifr:basedOnDictionaryReference>
</ifr:properties>
</ifr:parameter>
<ifr:parameter name="CNO">
<ifr:descriptor>
<ifr:description language="EN">
Character Field Length = 10
</ifr:description>
</ifr:descriptor>
<ifr:definition>
<ifr:scalarType name="CHAR10">
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:fixedValuesListDefined>
false
</ifr:fixedValuesListDefined>
<ifr:mixedCaseSupported>
false
</ifr:mixedCaseSupported>
<ifr:signedNumber>
false
</ifr:signedNumber>
</ifr:properties>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
10
</ifr:length>
<ifr:internalLength1>
10
</ifr:internalLength1>
<ifr:internalLength2>
20
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
<ifr:outputLength>
10
</ifr:outputLength>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
<ifr:properties>
<ifr:direction>
in
</ifr:direction>
<ifr:class>
import
</ifr:class>
<ifr:type>
scalar
</ifr:type>
<ifr:optional>
true
</ifr:optional>
<ifr:basedOnDictionaryReference>
true
</ifr:basedOnDictionaryReference>
</ifr:properties>
</ifr:parameter>
<ifr:parameter name="BANK">
<ifr:descriptor>
<ifr:description language="EN">
test bank type
</ifr:description>
</ifr:descriptor>
<ifr:definition>
<ifr:complexType xmlns:xlink="http://www.w3.org/1999/xlink" name="ZST_CUST" type="structure" xlink:role="type" xlink:href="/Content?TYPE=type&NAME=ZST_CUST" />
</ifr:definition>
<ifr:properties>
<ifr:direction>
inout
</ifr:direction>
<ifr:class>
tables
</ifr:class>
<ifr:type>
structure
</ifr:type>
<ifr:optional>
true
</ifr:optional>
<ifr:basedOnDictionaryReference>
true
</ifr:basedOnDictionaryReference>
</ifr:properties>
</ifr:parameter>
</ifr:parameters>
</ifr:definition>
</ifr:container>
</wsdl:operation>
</wsdl:binding>
</wsdl:definitions> -
Cut vedio file into different frames using java
Hi friends,
I would like o know how we can cut the vedio file into different formate using JMF.
Given an input media file, the object is to cut pieces from the file and generate an output file from that.
i want to cut vedio from X time to Y time.
If any one is work on this please help.Why "split" the file? Just write a packet with a DataOutputStream(GZipOutputStream()), send it, and then read it back with a DataInputStream(GZipInputStream()) ...
1. The GZip*Streams take care of compression.
2. The Data*Streams take of byte order and so on.
3. Your DatagramPacket handles the transport.
The hardest part is figuring out what buffer size works best for your network... there is no "right" answer to that. -
Music and Video on Nas in folders but how do i set up itunes on multiple computers to see and use these files and create libraries?
So i have had a itunes set up on my old PC, bought a NAS and copied the folders over to the NAS, i did this incorrectly and so then even when i told the old PC to use that folder it saw all the songs but wasnt able to play the songs as it was looking in the incorrect place.
So now i want my Mac as well as my PC and others to all use the music, videos etc on the NAS they are in itunes friendly folders (as they were compiled this way by the itunes on the old PC.
When i tell the mac to use the itunes library.itl file it sees the song list (about 100gb) but cant see any songs, so i have removed this file to another location for now with the hope to set up a new file and then get it to see the songs on the folder from the NAS.
Can someone tell me how to do this for all the Mac's and PC's on my network as i really want one master library that all use and add too.
Thanks for your help in advance.I have the same question but I am using two pc's
-
how can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?
Does the order matter here?Because the photos will be sent for printing. If there is any other reason, can you please cite example.
Maybe you are looking for
-
MBP no longer connects to network via Airport
today my MBP will not connect to my network via airport. Several other apple devices connect to the network no problem. MBP connects to the network OK via ethernet cable. When I try to connect it just keep prompting for network password & user passw
-
I'm trying to figure out some issues with a friend's MacBook Pro (2008/Lion). There's something going on with the hard drive and it won't boot normally. It hangs on the grey screen with spinning gear. I've booted into the Recovery partition and run F
-
Is there a way in iTunes to "stich" or combine songs? Example Journey's Anytime and Feeling That Way are always played together on the radio. Or ZZ Tops Waitin' For the Bus and Jesus Just left Chicago are always played together. Is there a way to c
-
Error when logical standby database
Hii all, First time i am creating logical standby database on oracle 10gR2 by oracle doc. but When i try to create logical standby database it give error DG 2011-07-11-09:44:24 0 2 755997031 Operation CTL_GET_STATUS cancelled during phase 2, error =
-
Why can't I place an html snippet where I want it?
I am trying to place a snippet at the bottom of one of my pages. I save the page. Publish it, and when I view the page after refreshing, it is somewhere else entirely, covering up text on another part of the page. Thanks in advance for your help. Her