SEND_SYSTEM_RELATIONSHIP_TO_SUPP job fails with "No customer numbers ..."
While executing SOLMAN_CONNECT tcode, I get the error
SEND_SYSTEM_RELATIONSHIP_TO_SUPP job fails with "No customer numbers in transaction AISUSER".
SAP note
Note 1351731 - Termination SEND_SYSTEM_RELATIONSHIP_TO_SUPP/SOLMAN_CONNECT
says problem fixed against ST 400 with SP SAPKITL431.
I'm running NW 7.0 SPS 15 which has ST 400 SAPKITL425.
I need to get SAPKITL431. but when I search SWDC for this package, I can only find SAPKITL430. I need to get SAPKITL431 in the download basket and have someone at SAP to turn off the MOPZ requirement so I can use DLManager to get the SP dlownloaded and installed. Are there other dependent SPs required. Or am I better off downloading SPS 16 or later.
I need the MOPZ requirement turned off for this until I can get the fix and get MOPZ up and running.
Hi Andreas,
AISUSER was unchanged, which contained the S-user # for user DDIC and myself.
I went thru the steps in note 1140822, eventhough I had turned off BAdI months ago when I was setting up the RFCs for SAP-OSS. I maintain just one S-User. Therefore followed option 2 in the note.
Trying to implement snote 114822.
An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
Exception of class CX_SY_NO_HANDLER
An exception of type 'CX_SY_OPEN_SQL_DB' occurred, that was not caught anywhere in the call hierarchy. It was not handled locally or declared using a RAISING clause.
TC SE19 shows AI_SDK_SP_RFC_RP as active.
Selected New BAdI and Display.
Re-executed note 1140822 and it worked this time. Apparently, the display of AI_SDK_SP_RFC_RP activated this implementation.
Snote 1140822 completed. I set process status to completed.
I reran MOPZ under tc solution_manager. I now get a different error. ERROR: E:/TMWFLOW/MO_BACKEND:025.
I forced a run immediately on SEND_SYSTEM_RELATIONSHIP_TO_SUPPORT, whcih ran successfully NOW.
Now MOPZ runs fine and I can see my files to download. I did not have any logical systems to select, but MOPZ did pickup some patches anyway. Not sure why no logical systems at this point. I defined a few logicals for both SM and satellite systems. I'll address this issue separately and open new thread, if need be.
The one question that remains is using SE19 to display status of AI_SDK_SP_RFC_RP appears to of activated it. Is this right? It fixed something such that now the applying the snote worked in de-activating it.
Thanks for all your help.
-Don Isler - HP SAP CC.
P.S. Is there a way I can upload or email you a word doc that has my screen shots and details of what I tried?
Edited by: Don Isler on Jul 29, 2009 1:36 PM
Similar Messages
-
Background jobs failing with ABAP/4 processor: RFC_CONVERSION_FIELD
Hi Guru's,
Below are the backgroud jobs failing with runtime Error " ABAP/4 processor: RFC_CONVERSION_FIELD" in solution manager system (solution manager 3.0,SR2). Not sure why all these jobs failing with this dump on of sudden. i haven't made any changes to the system in the recent past.
BTC_CMS_COLLECTOR
SAP_APPLICATION_STAT_COLLECTOR
SESS_Y000001806_COLL_TRANS
ABAp Dump says that
Conversion error between two character sets
What happened?
Conversion error "ab_rfccon" from character set 4103 to character set 1100.
When executing a remote function call a conversion error occurred. This
occurred when receiving or sending the data. The conversion error can
only appear, when the data is transferred from a Unicode system to a
non-Unicode system.
Could some one please share some information if any one experienced the issue. Please note that all of our ECC systems are uni-code systems.
Thanks & Regards,
Vinod.Hi Vinod
Just try to understand the purpose of these jobs and may be these Notes will help you
Note 814707 - Troubleshooting for RFC connections Unicode/non-Unicode
Note 647495 - RFC for Unicode ./. non-Unicode Connections
Note 1361970 - Conversion problems during RFC communication -
Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:00:01 AM Error: 2014-08-15 10:00:07.20
Code: 0xC0047062 Source: Data Flow Task LEAN [6761]
Description: Teradata.Client.Provider.TdException: [Teradata Database] [3006] Logons are disabled.
at Teradata.Client.Provider.WpMessageManager.CheckForError()
at Teradata.Client.Provider.WpMessageManager.ProcessResponse()
at Teradata.Client.Provider.WpLogonManager.Action()
at Teradata.Client.Provider.WpSession.ManagerAction(WpMessageManager manager, UtlStopwatchWrapper watch, Int32 connectionTimeout)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout, String password)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout)
at Teradata.Client.Provider.Connection.Open(UtlConnectionString connectionString, UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.CreateConnection(UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.GetConnectionFromPool(Object owningObject)
at Teradata.Client.Provider.ConnectionFactory.GetConnection(Object owningObject, UtlConnectionString connStr)
at Teradata.Client.Provider.TdConnection.Open()
at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
End Error Error: 2014-08-15 10:00:07.35 Code: 0xC0047017 Source: Data Flow Task SSIS.Pipeline
Description: component "LEAN" (6761) failed validation and returned error code 0x80004005. End Error Error: 2014-08-15 10:00:07.48
Code: 0xC004700C Source: Data Flow Task SSIS.Pipeline Description: One or more component failed validation.
End Error Error: 2014-08-15 10:00:07.60 Code: 0xC0024107 Source: Data Flow Task
Description: There were errors during task validation. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:00:01 AM Finished: 10:00:07 AM
Elapsed: 6.692 seconds. The package execution failed. The step failed.
SQL Server agent job fails with above error, Please let me know process tohandle it.
Thanks,
Vishal.The error message suggests its the issue with Teradata source database to which SSIS tries to connect within the data flow task. Make sure Teradata database is available and LOGON is enabled.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
OIM - Reconciliation jobs fail with Error: OPERATIONS_ERROR
Hi,
after integrating OIM with OAM for Fusion Apps provisioning (11.1.3), LDAP Reconciliation jobs fail with error OPERATIONS_ERROR.
Connection to LDAP looks OK, new users created in OIM are synchronized to LDAP, just Reconciliation jobs fail:
<May 1, 2012 10:00:50 AM CEST> <Error> <oracle.iam.platform.entitymgr.provider.ldap> <IAM-0042016> <An error occurred while getting the change log from LDAP - {0}
javax.naming.NamingException: Error: OPERATIONS_ERROR
Virtualization Session closed [Root exception is oracle.ods.virtualization.service.VirtualizationException: Virtualization Session closed]
at oracle.ods.virtualization.jndi.OVDUtil.mapErrorCode(OVDUtil.java:200)
at oracle.ods.virtualization.jndi.OVDContext.search(OVDContext.java:439)
at oracle.ods.virtualization.jndi.OVDContext.search(OVDContext.java:329)
at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:248)
at oracle.iam.platform.entitymgr.provider.ldap.LDAPUtil.search(LDAPUtil.java:1049)
at oracle.iam.platform.entitymgr.provider.ldap.LDAPDataProvider.getChangelogResults(LDAPDataProvider.java:1531)
at oracle.iam.platform.entitymgr.provider.ldap.LDAPDataProvider.deltaDetect(LDAPDataProvider.java:1488)
at oracle.iam.ldapsync.scheduletasks.user.LDAPUserChangesReconTask.execute(LDAPUserChangesReconTask.java:152)
at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:145)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:196)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
Caused By: oracle.ods.virtualization.service.VirtualizationException: Virtualization Session closed
at oracle.ods.virtualization.service.DefaultVirtualizationSession.checkActiveAndIncrementOp(DefaultVirtualizationSession.java:425)
at oracle.ods.virtualization.service.DefaultVirtualizationSession.search(DefaultVirtualizationSession.java:183)
at oracle.ods.virtualization.jndi.OVDContext.search(OVDContext.java:429)
at oracle.ods.virtualization.jndi.OVDContext.search(OVDContext.java:329)
at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:248)
at oracle.iam.platform.entitymgr.provider.ldap.LDAPDataProvider.deltaDetect(LDAPDataProvider.java:1488)
at oracle.iam.ldapsync.scheduletasks.user.LDAPUserChangesReconTask.execute(LDAPUserChangesReconTask.java:152)
at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:198)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
===
Reconciliation worked before integrating OIM with OAM.
Any ideas what could be wrong - or how to investigate this issue?
Thanks
DanielOVD changelog adapter was OK, but OVD URL was missing in the IT resource.
Reconciliation works now.
Thanks for pointing me to correct direction.
Daniel -
Job failed with error tempdb is not available
HI All,
Backup job failed with error 'Unable to determine if the owner () of job backup_all_user_db_full has server access (reason: The log for database 'tempdb' is not available. [SQLSTATE HY000] (Error 9001)).'
I checked in errorlog
LogWriter: Operating system error 1784(The supplied user buffer is not valid for the requested operation.) encountered.
Write error during log flush. Shutting down server
2014-09-09 07:46:25.90 spid52 Error: 9001, Severity: 21, State: 1
2014-09-09 07:46:25.90 spid52 The log for database 'tempdb' is not available..
2014-09-09 07:46:25.92 spid51 Error: 9001, Severity: 21, State: 1
Can anyone suggest to why it is happeningFrom the error message, it looks like the drive on which the tempdb log file is residing is having issues.
Please involve your storage admin to look into the disk subsystem -
Hello,
When I tried to update the schedule of the project , the job failed with the error message " AssignmentAlreadyExists". I further looked into the ULS logs but it wasn't that helpful.
This is the message I found in ULS logs "type = UpdateScheduledProject failed at Message 5 and is blocking the correlation Errors: AssignmentAlreadyExists,Leaving Monitored Scope (FillTypedDataSet -- MSP_WEB_SP_QRY_ReadTimeSheetAssignmentsAndCustomFieldData).
Execution Time=398.730006187937"
Pplease help me to understand the root cause of this problem.
I have verified all the assignments in the plan and I did not find any duplicates.
Thanks in advance.
SeshaThis issue might need detailed troubleshooting, I would suggest you raise a support case with Microsoft.
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
the thread. -
Background job failing with license check error
Hi Experts
In our ERP 6.0 system ,all the background jobs are failing with license check error.
Have checked the license in SLICENSE and the license is fine.
There is no warning while users are loggign in ,but when any background job is runing its failing with error
Job started
Logon not possible (error in license check)
Job cancelled after system exception ERROR_MESSAGE
Also performed the license test which is failing
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\XX1_DVEBMGS00_host_xx
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = hostname
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
Please suggest how to troubleshoot.
Regards
Ajay@Michael
In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
@Jagadish
Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
But still the license test is failing at OS Level..below is the command prompt output.
===================================================================
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
=F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
SAP License Key Administration - Copyright (C) 2003 SAP AG
2 SAP license key(s) successfully installed.
F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\MD1_DVEBMGS00_mngsez148079
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = host
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
============================================================
@Juan
The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
But now this issue is here,so i guess we should troubleshoot.
Please let me know any other pointers.
Regards
Ajay
PS In SLICENSE new installed license is fine and all users can login. -
Backup job failing with error ORA-12546: TNS:permission denied
Hi All
This is regarding one backup job running on windows server 2003 failing with below error.. when we are running this job manually that is running fine.. but not running from windows scheduler.
its 9.2.0.1 and the 32 bit... windows 2003 64 bit
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12546: TNS:permission denied
Please help.
Edited by: 811427 on Sep 6, 2011 12:36 AMI assume you installed Oracle as "Administrator" user. If so, make sure you are running the job from the same user. Optionally open "services.msc" and go to the "ORCL Service" or whatever it may and check "Log on" tab. It should be "logon as" value should be "Local system". If you are using a domain then give credentials accordingly. Make sure you are part of "DBA" group.
The ORA-12546 TNS:permission denied points to "Insufficient permissions to trace/log files" - check the trace/log destination is writable and requisite permissions are given. -
Deleting Indexes Job failing with ORA-01418
Hi,
While deleting the indexes to the Infocube the job is failing with an Error: ORA-01418. In SM37 it is throwing the message SQL-Error ORA-01418 specfied Index does not exist.
Checked in RSRV for the InfoCube it is showing red while we execute for the repair.
Please advice... right replies will be appreciated.
Regards,
DMKFor BW from 7.0 you can take a look to note 1003360.
Have you tried the autorepair from rsrv? -
NetConfig job failing with RME_CDL1031
Hi,
I have a NetShow job that is failing with this message:
ERROR:RME_CDL1031:Transport session to device failed Couldnot enter ENABLE mode from USER mode on Device. Couldnot enter ENABLE mode from USER mode on Device.
I have double checked the credentials in DCR (manually and using the 'check device credentials' option) and its configured properly.
Could you please advice what is wrong?
Thanks,
AmitIf you are using telnet, the easiest thing to do is get a packet capture of all tcp/23 traffic between the RME server and the device when running the Netshow job. This will show why RME was unable to enter enable mode.
-
Hi all
I installed a solution manager 4.0 with oracle 10.2 on OS W2K. When i start the brbackup with br*tools it works without problems. When I start the brbackup with db13 I receive the following error and the backup failes with rt code 5:
BR0055I Start of database backup: bdxezstr.anf 2008-02-06 12.55.59
BR0484I BRBACKUP log file: I:\oracle\SSM\sapbackup\bdxezstr.anf
BR0252W Function remove() failed for 'F:\oracle\SSM\102\database\sap.ora' at location BrInitOraCreate-1
BR0253W errno 13: Permission denied
BR0252W Function remove() failed for 'F:\oracle\SSM\102\database\sap.ora' at location BrInitOraCopy-7
BR0253W errno 13: Permission denied
BR0166I Parameter 'control_files' not found in file F:\oracle\SSM\102\database\initSSM.ora - default assumed
BR0274W File 'F:\oracle\SSM\102\database\CTL1SSM.ORA' not found
BR0280I BRBACKUP time stamp: 2008-02-06 12.56.01
BR0319I Control file copy created: I:\oracle\SSM\sapbackup\CNTRLSSM.DBF 12664832
Can anyone help me
Regards,
Matthiashi,
note the following:
1) you are using windows (there is special behaviour here)
2) when you run BRBACKUP at os level, you are executing it as user <sid>adm
3) when you run BRBACKUP from DB13 you are executing it as user SAPService<SID>
Do you see the difference?
Running BRBACKUP at OS level with user <sid>adm means "nothing" in windows.
Please, check that the user SAPService<SID> has authorizatons on the mentioned files/directories.
The error
> BR0253W errno 13: Permission denied
indicates that it does NOT have authorizations -
BAPI_CUSTOMER_GETDETAIL1 fails with locked customer record
I'm using the above mentioned BAPI to retrieve some customer classification details, and calls to it fail when someone has the customer record locked (viewing it in VD02 or XD02, for instance).
I can certainly understand this behaviour if I were trying to update the classifications or the customer record itself. I can even understand why one might want to be able to block this call when the record was being edited so as not to provide out-of-date information, but in my usage slightly outdated information is perfectly acceptable, and the failure of the call is much worse.
Is there a BAPI function that provides the same data that isn't blocked by record-level locks, or a way to consume this function without being blocked in this fashion?
Thanks in advanceMy mistake - it's actually BAPI_OBJCL_CHANGE that I'm looking at as failing when the customer record is locked.
In retrospect this makes a little more sense, but I suppose I hoped that since classifications are maintained outside the KNA1 table structure that locking the customer record would not lock the customer's classifications, and that those would only be locked if they were being modified. It appears that's not the case.
I would still be interested to hear of any workarounds for this issue, though. -
Import job failes with ORA-01403: no data found ORA-06512: at "SYSMAN.MGMT
Hello everyone,
I need a help on importing data from a schema in server 1 to the same schema in server 2 via network link. I receive following error when I try to submit a job on Enterprise Manager:
Import Submit Failed
ORA-01403: no data found ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 5806 ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 7812 ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8608 ORA-01403: no data found ORA-06512: at "SYSMAN.MGMT_JOBS", line 273 ORA-06512: at "SYSMAN.MGMT_JOBS", line 86 ORA-06512: at line 1
Sql of the job:
declare
h1 NUMBER;
begin
h1 := dbms_datapump.open (operation => 'IMPORT', job_mode => 'FULL', remote_link => 'B_PROD_LINK', job_name => 'BIMPORTFRMPRDTORPT4', version => 'COMPATIBLE');
dbms_datapump.set_parallel(handle => h1, degree => 1);
dbms_datapump.add_file(handle => h1, filename => 'IMPORT.LOG', directory => 'DATA_PUMP_DIR', filetype => 3);
dbms_datapump.set_parameter(handle => h1, name => 'KEEP_MASTER', value => 0);
dbms_datapump.set_parameter(handle => h1, name => 'INCLUDE_METADATA', value => 1);
dbms_datapump.set_parameter(handle => h1, name => 'ESTIMATE', value => 'BLOCKS');
dbms_datapump.set_parameter(handle => h1, name => 'REUSE_DATAFILES', value => 0);
dbms_datapump.set_parameter(handle => h1, name => 'TABLE_EXISTS_ACTION', value => 'TRUNCATE');
dbms_datapump.set_parameter(handle => h1, name => 'SKIP_UNUSABLE_INDEXES', value => 0);
dbms_datapump.start_job(handle => h1, skip_current => 0, abort_step => 0);
dbms_datapump.detach(handle => h1);
end;
It says network link is active when I test the network link to make sure its connectivity. I create the network link as a system account. I'm trying to do an import from an Oracle database 10.2.0.2 to 11.2.0.1. My 10g database is on ms windows 2003x64 while my 11g database is on OEL 5.4x64.
What should I do for now?
Thank you.
Edited by: user12144220 on Nov 4, 2012 5:02 AMIt will be wise to run the Oracle supply streams health check script to check your existing streams environment.
From the result, you can also open a tar with Oracle to see if they can help you with the setup.
In addition to the ORA-01403 error, you can also run some of the Oracle Streams packages (Managing Apply Errors) to see the full detail of what is missing that caused the Ora-01403 error.
I will also try to implement a smoke test using the simple heartbeat table suggested by Oracle Streams, if that is working, then you can begin your full scale setup in your environment knowing that the base Streams Structure is setup correctly.
HTH -
Hoping someone can help me here.
I'm using theHZ_CUST_ACCOUNT_SITE_V2PUB.get_cust_site_use_rec to successfully retrieve a cust_site_use record from the database.
I then update one column and use HZ_CUST_ACCOUNT_SITE_V2PUB.update_cust_site_use to try and update the record back to the database and I get
"No Customer Site Use Was Found with ID <number>"
This doesn't make any sense, I retrieved the record using the get api, so I know it's there ?
From googling around someone has suggested that the retrieve API uses HZ_CUST_SITE_USES_ALL and the update API uses HZ_CUST_SITE_USES
HZ_CUST_SITE_USES has no records in it, so if this is true, then that's why it fails.
Can anyone shed any light on this ?
Thanks a lot
ScottSet the org context before running the TCA API:
FND_GLOBAL.APPS_INITIALIZE(<user_id>,<resp_id>,<application_id>);
MO_GLOBAL.INIT('AR');
MO_GLOBAL.SET_POLICY_CONTEXT('S', <org_id>); -
Scheduled TMS_ # TMS_TP_IMPORT background jobs fail with error code 0232
Is anyone else having the problem we've just encountered since upgrading to ECC 6.0 and CRM 2007, where once setting up the automatic import ALL background jobs, to have all of the Transport Change Requests imported into the Q-Prod testing systems automatically, fail after several successful runs?
After setting up the automatic import background job to run every 15 minutes, the first few run successfully (importing any transports as it should), then the transports stop being imported.
The background jobs continue to run, but have the following in the job log overviews CRM 2007 - "Could not start transport control program tp". R\3 ECC 6.0 - "Transport control program tp ended with error code 0232".
Only by deleting the background job and recreating it (or manually importing) from STMS, can the transports continue to be imported. Although I have noticed that there are multiple tp.exe processes started, which need to be deleted before the STMS and TMS Background jobs work again.
The:
DB is SQL Server 2005
disp+work is at version 7000.150.14.48855
R3Trans is at version 7000.149.14.47907
tp is at version 7000.144.14.39594
Any suggestions on how to cure this for good?Thanks All
FYI
SAP first suggested the following notes: 19466, 1150361, and to add a Startup profile parameter rfc/use_gwstart = 1. Which was only partially successful.
I guess it had more to do with RFC processes hanging than it did with the tp, which was fixed in a later kernel patch level.
I've upgraded the kernel to the latest (70000.181.0.0) and my problem was fixed.
Ken
Maybe you are looking for
-
Auto / Silent install of Essbase 6.1.4.0 (Client)
Does anyone know/have the switch(es) for an auto or silent install (client side) for Excel Essbase Add-in version 6.1.4.0?Thank you,Blake
-
I had to wipe my machine and create a new account. Now I can't restore my iWeb domain file and thus can't edit my site. When I do try to restore the file I'm told: The operation can't be completed because some items had to be skipped. For each item,
-
My PC is a fujitsuscaleo 600, last year I had a new hard drive and some extra RAM fitted and since then has been good - have used, and updated Firefox for over 6 years. in August I installed TrendMicro antivirus and for different reasons this has bee
-
Linking a programmatically created folder in SharePoint Document Library.
I have created folders within a document library using InfoPath & C#. To that folder I uploaded several documents using several file attachment controls within the same InfoPath Form using the code behind the form. Now I want to create an Hyperlink
-
How to get the correct stored procedure in oracle
Hi sir, i am having one stored procedure which i converted from sql it's compiled successfully. create or replace PROCEDURE Spvalidateholiday1 v_pidate1 IN Date DEFAULT NULL , v_piEmpid IN VARCHAR2 DEFAULT NULL , v_pidate2 IN Date DEFAULT NULL , v_po