'send Timezone' setting in remote portlet web service

Our portlets don't render if we check the box 'send timezone' in the advanced settings section of a portlet's web service. It throws the following error in pt spy: 
*** PTBase.ThrowException *** (-2147024809) Error getting portlet content: Error beginning processing of this portlet: -2147024809 - Error in function CSPPortletProvider.BeginProcessing (lMode == 1, pUserSession == com.plumtree.server.impl.core.PTSession, pGadgetInfo == com.plumtree.server.impl.community.PTMyPortalGadgetInfo, pStates == com.plumtree.server.impl.core.PTStates, pAdminSettings == '[NOT TRACED]', vAppDataStateObject == com.plumtree.server.impl.core.PTState, pUserInterface == ): -2147024809 - AppDataState: missing required value TIMEZONE
com.plumtree.server.marshalers.PTException: -2147024809 - Error getting portlet content: Error beginning processing of this portlet: -2147024809 - Error in function CSPPortletProvider.BeginProcessing (lMode == 1, pUserSession == com.plumtree.server.impl.core.PTSession, pGadgetInfo == com.plumtree.server.impl.community.PTMyPortalGadgetInfo, pStates == com.plumtree.server.impl.core.PTStates, pAdminSettings == '[NOT TRACED]', vAppDataStateObject == com.plumtree.server.impl.core.PTState, pUserInterface == ): -2147024809 - AppDataState: missing required value TIMEZONE
com.plumtree.server.marshalers.PTException: -2147024809 - Error getting portlet content: Error beginning processing of this portlet: -2147024809 - Error in function CSPPortletProvider.BeginProcessing (lMode == 1, pUserSession == com.plumtree.server.impl.core.PTSession, pGadgetInfo == com.plumtree.server.impl.community.PTMyPortalGadgetInfo, pStates == com.plumtree.server.impl.core.PTStates, pAdminSettings == '[NOT TRACED]', vAppDataStateObject == com.plumtree.server.impl.core.PTState, pUserInterface == ): -2147024809 - AppDataState: missing required value TIMEZONE
at com.plumtree.server.impl.core.PTBase.ThrowException(String message, Int32 errorCode) in e:\buildroot\Release\portalserver\6.1.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\core\PTBase.cs:line 87
at com.plumtree.server.impl.community.PTMyPortalGadgetContent.GetContent(Int32 nIndex) in e:\buildroot\Release\portalserver\6.1.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\community\PTMyPortalGadgetContent.cs:line 411
at com.plumtree.portalpages.browsing.myportal.MyPortalModel.GetPortletHTMLTextFromIndex(Int32 nPortletIndex) in C:\plumtree_ui_source\portalui\6.1.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\myportal\MyPortalModel.cs:line 385
at com.bea.alui.liquidskin.styles.overrides.STYLES_BodyAreaView.PortletContent(Int32 nPortletIndex, Int32 nColumnID)
at com.bea.alui.liquidskin.styles.overrides.STYLES_BodyAreaView.PageColumnTable(Int32 nColumnID, Boolean bContainsFreeFormContent)
at com.bea.alui.liquidskin.styles.overrides.STYLES_BodyAreaView.ThreeColumns(Int32 _nPageType)
at com.bea.alui.liquidskin.styles.overrides.STYLES_BodyAreaView.Display()
at com.bea.alui.liquidskin.styles.overrides.STYLES_MyPortalDP.PageDisplay()
at com.bea.alui.liquidskin.styles.overrides.STYLES_MyPortalDP.DisplayBody(Int32 nNavScheme)
at com.bea.alui.liquidskin.styles.overrides.STYLES_MyPortalDP.Display(IWebData pageData)
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Redirect myRedirect, RequestData tempData) in e:\buildroot\Release\uiinfrastructure\6.1.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 1829
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.1.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 525
at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.1.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 169
at com.plumtree.uiinfrastructure.web.XPPage.Service(HttpRequest httpRequest, HttpResponse httpResponse, HttpSessionState httpSession, HttpApplicationState httpApplication) in e:\buildroot\Release\httpmemorymanagement\6.1.x\dotNET\src\com\plumtree\uiinfrastructure\web\XPPage.cs:line 82
at com.plumtree.portaluiinfrastructure.activityspace.PlumHandler.ProcessRequest(HttpContext context) in C:\plumtree_ui_source\portalui\6.1.x\ptwebui\portal\dotnet\prod\src\web\PlumHandler.cs:line 37
at System.Web.CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.ResumeSteps(Exception error)
at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr)
at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
 
Where do I config the timezone in my portal config so I won't get this error if I want to send the timezone?

You have to do this programatically. See the thread
Re: Urgent : Timezone conversion issue
--Mukul

Similar Messages

Name of Lockbox set in Remote Portlet Web Service?

Using the ALUI 6.0 IDK API, does anybody know how to get the name of the Lockbox a Remote Portlet Web Service is using?
Authentication Settings / Credential Vault Settings / Lockbox

Hello,
first: I don´t know anything about the right solution. I am unaware of the existence of the solution, because there were quite many of question about this multiple selection problem and I don´t remember a single "answer".
I can recommend you to simplify everything and create the functionality yourself. I have done that before to avoid these "Adobe-standard" problems. If you have a problem with autofill of the object, ask your WS to send you a single string and pass it yourself using scripting (JS).
And if you have problems with multiple selection, create your own field/ object. Get the string of values, parse it, create multiple lines of the dynamic table with some suitable tool to check/ select the rows you need (use checkbox for example, and your text as a table row). This way you can selected anything you want with no problems at all. It wil only cost you some extra work.
Regards, Otto

Problem setting up the UCP Web Service

I am new to CISCO and my first project is to set up the UCP Web Service. I don't have access to the web interface on ACS but I was told that acs config-web-interface ucp enable was run.
I have in the UCP file on tomcat
C:\Tomcat 7.0\webapps\ROOT\UCP
within the UCP file I have :
META-INF
pythonImport
pythonUCP
WEB-INF
index.jsp
wsdl.xml
With that set up I get to the index.jsp page. When I put the information in I get the following error message:
HTTP Status 404 - /UCP/UcpServlet
type Status report
message /UCP/UcpServlet
description The requested resource (/UCP/UcpServlet) is not available
I am sure I have done some sad and strange things. Can someone point me in the right direction? A simple stupid one at that...
Thank you so much

Hi,
Is there solution for this issue? I also have encounter similar problem:
An error occurred at line: [14] in the generated java file: [C:\Program Files\Apache Software Foundation\Tomcat 7.0\work\Catalina\localhost\_\org\apache\jsp\indexacs_jsp.java]
Only a type can be imported. com.cisco.nm.acs.mgmt.common.version.VersionFileReader resolves to a package
An error occurred at line: 23 in the jsp file: /indexacs.jsp
VersionFileReader cannot be resolved
It's seems there is a missed library (VersionFileReader) for JSP, does anyone can guide me to find it?
Thanks,
Rp

ABAP proxy client sending to XI by using the WEB Service

Hi
I have scenario where ABAP Proxy need to send the data by calling a web service middleware as SAP XI/PI,
Can anyone please provide the details of the scenarion that ABAP Proxy calls the webservice to send the data and receive it back the response, (Synchronous communication)
Thanks
PR

Hi PR
My understanding of your requirement is like
Proxy <-> XI <-> SOAP.
Steps.
1. Create Client proxy to send data to XI
2. Import the WSDL provided by receiver system in XI
3. Do IR steps
4. ID - SA is not required
5. Configure Receiver SOAP adapter using the URL and Soap Action from the WSDL you received.
Thanks
Gaurav

I want to export acquired data via XML to a remote URL/web service. Is there some online reference for EXACTLY what XML features are available in 6.1?

Is there any online reference to the XML methods available in 6.1?
I would like to set up a LabView system that acquires data from local hardware, and then sends acquired data as XML "packets" to a remote web service. I can't seem to find any online reference to this when I search the site. I don't want the "gee golly 6.1 is cool" marketing stuff. Just a simple technical reference to abilities.

If you're looking for more technical information about all the new features of 6.1, try the LabVIEW 6.1 Upgrade Notes. Here's what they say about the XML functions:
"Use the Flatten to XML function located on the Functions»Advanced»Data Manipulation palette to convert any LabVIEW data type to the XML format according to the LabVIEW XML schema. Use the Unflatten from XML function located on the same palette to convert a data type in the XML format into LabVIEW data.
For these conversions, LabVIEW uses a predefined XML schema that is described in labview\help\LVXMLSchema.xsd."
Kelly Holmes
LabVIEW Documentation
Kelly H
LabVIEW Documentation
National Instruments

Sending controller context value attributes to web service model

Hi,
I have put some parameters (value Attributes) in controller context and mapped to different views. Is there any way by which i can send the values to the web service model , each time the web service is called? like through header or some thing like that??

Hi Sujesh,
Read those value attributes in your controller using following code:
wdcontext.currentContextElement().get<attribute>();
and then set these value in your web service model.
<model name> model = new <model name>();
model.set<attribute>(<value>);
wdcontext.node<nodename of your web service model>().bind(model);
wdcontext.current<nodename of your web service model>element().modelobject().execute();
Regards,
Bhavik

Set listbox items from web service response

Hi All
I am trying to set list box items from a web service response. Couple of issues over here:
1. The user should be able to select multiple items from the list. Hence if I set "Allow multiple values" and set Commit on "exit", then after the web service returns the output, no data is displayed in the listbox. I need to click inside the list box to see the data returned by the web service. How to overcome this..?? ( However this problem (clicking inside the listbox to see the items) does not exist if "Allow multiple values" is unchecked and Commit is set on "Select". )
2. After the list box is filled up, certain default values should be selected. This selection is based on one of the response field (which is actually a table with multiple values... ). Hence, how to capture this response field and set the default values in the above list..??
3. The same case for a dropdown. The values are visible in dropdown. However, a default value should be selected and displayed after returning a response from web service. Again, this default value is dependant on another field in the response as in point no.2
I am trying to use postExecute event as described in [this|http://forms.stefcameron.com/2009/03/23/pre-process-web-service-responses/] link...however not able to achieve the functionality. Please provide suggestions / inputs.
Thanks
Deepak

Hello,
first: I don´t know anything about the right solution. I am unaware of the existence of the solution, because there were quite many of question about this multiple selection problem and I don´t remember a single "answer".
I can recommend you to simplify everything and create the functionality yourself. I have done that before to avoid these "Adobe-standard" problems. If you have a problem with autofill of the object, ask your WS to send you a single string and pass it yourself using scripting (JS).
And if you have problems with multiple selection, create your own field/ object. Get the string of values, parse it, create multiple lines of the dynamic table with some suitable tool to check/ select the rows you need (use checkbox for example, and your text as a table row). This way you can selected anything you want with no problems at all. It wil only cost you some extra work.
Regards, Otto

(remote) deploying web services to AS 8.0

I have a portlet that uses a web service. I can call and consume it fine when viewing it in creator, but as soon as I deploy it, the web service does not work. I know the url is valid (I can view the wsdl from the server), and I do not see any errors thrown in the portal (7) or app server log. These web services of course consumed fine when tested on pluto on the local development machine.
I had to add the sun-web.xml file when deploying a db to this server, is this anything similar for a web service?

If you use proxy to access the webservices, make sure that the proxy details are set on the AppServer too.
i.e, In AppServer admin console> JVm Settings> JVM optiions, you should have:
-Dhttp.proxyHost=yourproxy.yourcomany.com
-Dhttp.proxyPort= yourproxyport
-Dhttps.proxyHost=yourproxy.yourcomany.com
-Dhttps.proxyPort= yourproxyport
~Sakthi

Setting conversationID while invoking web service.

Hello,
I've developed a WLI process which I want to access as web service.
I'm using conversation as explained in
"How Do I: Tell Developers of Non-WebLogic Workshop Clients How to Participate in Conversations?"
http://e-docs.bea.com/workshop/docs81/doc/en/core/index.html
But I don't know how to access this web service and to set the conversationID in the SOAP header.
Thanks a lot.
Victor.

Hi Suresh & Mukesh,
Suresh:
I started the service by going through the following path System Administrator > System Configuration > Service Configuration > Application > <SERVICE_NAME> in system configuration of portal
Mukesh: Here I don't have any proxy settings.
Can you please let me know where I'm going wrong.
Thanx,
Dheeram

Setting timeout in Oracle Web Service Callouts

We have a 10.1.0.4 Enterprise DB with dbwsclient.jar loaded. Currently using the database callouts. The problem is there seems to be no timeout when the called web service does not respond. I did not see a setting for the socket timeout in the code produced by JPublisher.
Thanks

Hi,
Where the properties need to be put and how can they be read really depends on how your Web Service is implemented. What is the WS based on - EJB, POJO, PL/SQL, JMS...?
Yogesh

Xi sender mail adapter with attachment (to Web Service w/ attachment)

Hello,
We're working on an XI scenario wherein a sender mail adapter polls an exchange server inbox for mail (with attachment)and sends the attachment to a Web Service via SOAP Adapter? Does anyone know if this is doable, and if so, how?
Thanks,
Eric

Hi!
I think so, if you just have a single attachment to be transferred.
Use the Mail Sender Adapter and specify the MailServer URL etc...
In the Module provessor of the Mail-Adapter you have to specify the PayloadSwapBean ( -> this changes the payload - the attachment becomes the payload)
then you configure the standard XI-scenario with
SenderAgreement
Mapping if necessary
Receiver Agreement
Receiver adapter
kr Martin

Sending document to oracle xml gateway web service and body is url encoded

Hello,
a question from a complete newbie to web services. I have some code that is sending a soap message to an oracle xml gateway web service. In the soap message the values in the soap body look like &lt ;CNTROLAREA&gt ;
when I would be expecting <CNTROLAREA>. What I have been told is that the content of the ReceiveDocument element has been url encoded which causes the &lt and to correct it I need to change the paramater type from object to xmlnode and to build the request as an xmldocument. The xmlnode and xmldocument comes from a .net guy so I've been trying to find the equivalent in java but am not having any luck. I have a lot of reading to do but was wondering if someone might be able to point me in the right direction on how to correct the problem. I captured the soap message being sent using tcpmon. Why does the body have the &lt instead of the < as I was expecting and is there an xmldocument type? The header part of the soap message looks as I expect. "><soapenv:Header><ns1:XMLGateway_Header xmlns:ns1="http://xmlns.oracle.com/apps/fnd/XMLGateway"><ns1:MESSAGE_TYPE>XML</ns1:MESSAGE_TYPE>. It is being sent as a com.oracle.xmlns.apps.fnd.XMLGateway.XMLGateway_Header type.
thanks
Thanks
Edited by: twf123 on May 5, 2010 11:59 AM
Edited by: twf123 on May 5, 2010 12:00 PM

twf123 wrote:
What I have been told is that the content of the ReceiveDocument element has been url encoded which causes the &lt and to correct it I need to change the paramater type from object to xmlnode and to build the request as an xmldocument. Where do you change the parameter type?
The xmlnode and xmldocument comes from a .net guy so I've been trying to find the equivalent in java but am not having any luck. How do you get the data from .net guy? Which interface do you use? What processing do you do after receiving the data?

Set timeout for dynamic web service call in wls

Hi,
I have a dynamic client using Call interface to invoke 3rd party web service. How can I set the timeout for the call? I know there is a property to set for static client.
Thanks

Have you checked out the stub properties:
weblogic.wsee.transport.connection.timeout
weblogic.wsee.transport.read.timeout
http://edocs.beasys.com/wls/docs92/webserv/client.html#wp228628

Web service - is it possible send/receive a file consuming a web service ?

Hello expert,
is it possibile attache a file on web service's message ?
ps. My system is without Java stack and without PI.
Tks,

Hello,
Unfortunately not.
SOAP with attachments (of any kind) is only supported with NetWeaver application server 6.4 WITH JavaStack. The ABAP version only supports SOAP without attachments.
We solved this issue for outgoing files using an IDOC type which we send through an RFC destination to a URL on a webserver outside SAP which accepts a file as parameter.
regards

Send Port to internally hosted IIS web service needs to run on the SAME IIS SERVER from multiple orchestrations

Hi
We have a multi-server BizTalk environment. We have an Orchestration with multiple call orchestrations in it. Each called orchestration is calling a web service through a 2 way Send Port (which is hosted in IIS on each BizTalk server in our multi server
environment). We have to ensure that each called orchestration is calling these web services on the same IIS server.
I could create a dedicated host instance that the Send Port runs under to run only on one server but then this means that all our DBase traffic is happening on one server. We also thought about using the load balancer some how to achieve this through sticky
sessions etc.
This is all necessary because we are using Entity Framework exposed through web services and we need to manage transactions.
Any ideas on how we may achieve this. I have inserted a picture to try and show the scenario
Biztalk Developer

Haha, Entity Framework strikes again! But seriously, that is a rather odd architectural requirement, double check first. But anyway...
Try this: Configure the Send Port URI to point to something like http://localservicehost/[yourEFService]
Then in the local hosts file (the DNS/IP hosts file), define localservicehost to the local IP address where the service is listening.
That way, the connection will always be made to the local machine. Essentially the same as localhost.

'send Timezone' setting in remote portlet web service

Similar Messages

Maybe you are looking for