Sender and Receiver details in XML for FAX

Hi,
I have to send below informations in XML which is for fax(RightFax).
I am creating XML file in Smartforms.
They told me to provide sender and receiver details in XML. I dont know where to fill all these details.
Has anybody worked with RightFax for Smartforms? Please share with me.
Thanks,
Ramesh

hi,
upon understading your question i got a link.please go through this .
https://forums.sdn.sap.com/click.jspa?searchID=12286932&messageID=5229365
please reward me if helpful.

Similar Messages

Sender and receiver details

Hi,
Where can we check the sender and receiver details of the partner profiles in IDOC

Hi,
I think in WE20 transaction
Regards
Kiran

I now have message ID and other similar information on my Inbox page alongside my sender and receiver details how can I remove these ?

Obviously I have allowed this information to be detailed by somehow clicking a wrong button but would now like to correct this and have these details removed, any suggestions?

Many thanks Christ1, problem solved !

FAX machine with Manual function & option to connect PC for Send and receive

Nearly every MFD out there has these capabilities. I know the Ricoh, Konicaminolta, and the Kyocera can do this. The larger machines the fax needs to be installed as an option. Once installed you have walk up fax, scan to PC, Scan to e-mail, Fax forwarding to PC, or e-mail and if the driver is installed you can fax from your PC through the copier.

Hi to the Community
We have a requirement of FAX machine which should fulfill
our below requirements
Manual mode for sending and receiving Fax as Traditional
Second option required is it can be connected to PC so that
fax can be sent and receive directly from computer as well
I know to set up windows fax option to fulfill the second
requirement, but we need both options
If anyone knows a specific model, kindly let me know
This topic first appeared in the Spiceworks Community

Sending and receiving fax documents

I am wondering if there is a way to send and receive fax documents through my iMac. My internet connection is through a cable modem and have only found a way to fax using a modem. Any ideas would be great. Thanks

Unless your iMac has a built-in modem port, you will have to use an external fax modem for direct faxing. Otherwise, you can use an internet fax service such as eFax or FaxZero (US/Can only.)
Matt

Sending and receiving fax

I have hp officeject pro 8600 all in one. I can send or receiving a fax. I have tested fax test it printed out with
dial tone detection failed.

Hi @kimychong,
Thank you for visiting the HP Support Forums! I see you are having problems sending and receiving faxes with your HP Officejet Pro 8600. You ran a fax test and the dial tone failed. Please continue troubleshooting below:
Cannot Send or Receive Faxes
If you are still running into fax problems after the troubleshooting has been done leave me with the following information:
1. What is the Exact model of HP 8600 you are using as there are a few in the series?
2. What is your current Operating system, Windows or Mac and which version?
3. How is the printer connected, USB or Wireless?
4. Do you get any error messages when sending or receiving faxes?
5. What kind of phone line do you have, digital, analogue or VoIP?
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Question about Sender and Receiver Structure for JDBC

Dear All,
I want to know why there is a fixed format for sender and receiver structure for JDBC. why cant we use the structure like what we want? explain me in detail.
Thanks

Good Question:
We have to create our data structure based on the existing database table structure. While reading or writing , JDBC adapter convert our data type structure in to SQL Query Statements that matches Table structure.

Help please:set up mac 10.4.11 with ext dsl modem to send and receive faxes

Hi and thanks in advance. I have a G4MDD dual processor, and have a dsl modem for internet connection. I want to set up to send and receive faxes. I can make and receive phone calls while connected to the internet. any ideas or help appreciated. Thanks again.
Message was edited by: R.Andom

I cannot send/receive faxes via my dsl, I have to use my regular phone line. (My DSL modem only has one phone jack port, and that is to connect it to the outside world. Pretty sure this is true of every DSL modem.)
When I need fax capability, I unplug the phone line to my telephone at the phone end, and plug that cable into the modem port in the back of the G4. (The modem is built-in.) After sending / receiving, I switch the cable back to the phone.
You set up fax capability in System Preferences / Print and Fax.

Unable to send and receive email for external domain

Hi,
I just installed Exchange Server on my 2K8 domain controller. I have set up the send connector and made necessary changes to the receive connector as well. I have updated the DNS records as well on my domain registrar. I can access OWA from outside my companies
network and is able to send and receive emails for my domain but unable to send or receive emails to any other domain. I have checked the delivery report and it says that the message has been queued on the server.
I also did nslookup. Results mentioned below:
C:\Users\Administrator>nslookup www.google.com
Server: localhost
Address: ::1
Non-authoritative answer:
Name:    www.google.com
Addresses: 2404:6800:4009:802::1014
          74.125.236.145
          74.125.236.148
          74.125.236.146
          74.125.236.144
          74.125.236.147
C:\Users\Administrator>nslookup www.microsoft.com
Server: localhost
Address: ::1
DNS request timed out.
    timeout was 2 seconds.
DNS request timed out.
    timeout was 2 seconds.
*** Request to localhost timed-out
Any help would be much appreciated!

Hi hg01,
According to your description, I notice that you installed Exchange server on a DC.
It is not recommended to install Exchange server on a DC. I suggest install Exchange server on a member server. More details to see:
Installing Exchange on a domain controller is not recommended
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
About your issue, cannot send and receive externally, I suggest make sure the DNS can be resolved first.
Then, check whether Outlook Anywhere has been enabled. If not, please enable it on both Exchange server and Outlook client side.
Last, try to configure both Send Connector and Receive Connector.
More detailed error message will be helpful for the further troubleshooting.
Thanks

Send and receive a FAX without a phone line

Is it possible to send and receive faxes without a phone line. Instead, can I use bluetooth and cell phone? Or, are there any other options?
MacBook Pro 15" Mac OS X (10.4.5)

Yes/No. There are internet options, companies/programs that like internet phone dialers allow you to send faxes over the internet that end up calling actual phones. Most (if not all) charge a fee for this.
As for bluetooth/cellphone, you're better off sticking with internet options. You could use bluetooth if you had a bluetooth device setup to receive and convert but I'm not sure such advices exist and even if they did I'm not sure the value of them. It would be like sending from your laptop while standing next to a fax machine. Cell phones are possible if your phone allows connection via modem which only a handful do. Given a cellphone with modem support and an apple modem, its possible.
Please remember to mark helpful/solved replies appropriately.

Can you send and receive Fax`s with Firefox?

Can you send and receive Fax`s with Firefox? If so how do you do it?

Hi invariance,
Your printer supports eFax only, not analog faxing. To eFax, you will need to go through the registration process from the front panel of the printer. This will give you 20 faxes per month for free. If additional faxing is needed, you will need to cantact eFax and set up an account. There will be a fee for additional faxing capabilities.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

TS2755 I have 3 phones on one Icloud account. It has been this way for over a year with no issues. After and update on of the lines started getting text messages from all 3 phones. We fixed the send and receive and it was fixed. It is doing it again.

I have 3 phones on one Icloud account. They have been this way for over a year. After an update last week one of the phones started getting messages for all of the other lines. We fixed this under the send and receive under settings. It was fine for a few days. Suddenly it started happening again. Yesterday after two hours on the phone I changed my apple id and it is still happening. Before that Verizon had told me to turn off my imessage when that happened I could not get any texts at all from other Iphone users.

Make 3 different iCloud accounts and use ONLY for iMessage. That will permanently fix your issue.

MS Outlook 2011 for Mac will no longer automatically send and receive email since upgrade to OS 10.9 Mavericks. Does anyone know of a solution?

I have been having trouble with Outlook 2011 for Mac since updating to OS 10.9 Marvericks. I have tried updating the database and identity. I can get email if a go to each account and try to download it. But email will not come automatically and can I send and receive all accounts. Does anyone have a solution? I do not want to lose my email, contacts and information.

I am also finding that searching in Mail for emails in this account is leading to false negative results. It's astonishing that I can search for an email I know is in the Inbox list yet not find it unless I scroll down to it manually and clicking it. Then it will show up in the results if I search again. I just did "rebuild" a day ago (have to do that every few days or so to get Outlook Exchange emails restored again anyway), so I doubt that this would fix the issue, but even if it did it's ridiculous... do I really have to abandon Mail and move to Microsoft Outlook on my mac to read my emails? Mail is currently FAILING to work for those of us who have to deal with Microsoft servers... which must be a huge # of customers, Apple.

Prerequisites for Sender and Receiver FTP adapter

Hi Experts,
I am new to PI and configuring simple file to file scenario. I need to know the prerequsites for sender and receiver FTP adapter. Scenario is System A -> XI -> System B .
What I want to know is:
1> What ports need to be opened?
2> Any service that I need to activate?
3> Do I need to install FTP server in any of the machine?
If I have missed something, please add.
Br,
Nilz

Hi,
1> What ports need to be opened?
mentioned in below link as said its 21.
2> Any service that I need to activate?
No
3> Do I need to install FTP server in any of the machine?
THere are two ways by which u can pick ur file.
1) NFS by which u can put the file on XI appplication directory and pick up ur file.
2) FTP u have to put ur file on FYP server and XI will pick up the file from there. U can use freeware FTP and install it on ur Desktop search on goolge u will get ti FTP installtion.
refer the below configuration requirement for FIle adapter.
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
ALso refer the end to end file to file scenario.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
chirag

TS4268 Hello, it's been 5 days now since my imessage has not working..and i have chatted to the costumer for two times. I took thier advice and instructions just to enable to send and receive on it but unfortunately until now its still NOT working. Pls.he

Hello, it's been 5 days now since my imessage has not working..and i have chatted to the costumer for two times. I took thier advice and instructions just to enable to send and receive on it but unfortunately until now its still NOT working. Is there anybody who could help me please?

Try this even if you have already. Just make sure to follow the steps specifically.
Go to settings > Facetime > send and recieve > tap on your apple id and sign out. If your not signed in then that will work as well.
Go to settings > Messages > sent and recieve > tap on your apple id and sign out.
Restart the iPad by doing the slide to power off setup. Just hold the power button on the top right till it turns off.
After the iPad has been restarted:
Go to settings > Facetime > and sign in
Go to settings > Messages > and sign in
Wait about 3 min then restart the iPad again. Same instructions as above.
When you restart you should be able to use messages again. If not then call support again and talk to someone higher than the first level support they have.

Sender and Receiver details in XML for FAX

Similar Messages

Maybe you are looking for