Sender email address in dunning letter
hi,
I would like to include the sender email address and phone number (stored in table ADR6) on the dunning Notice sent to the customer.
I could see somewhere on that forum that there is a SAP note for that but I could only find the note # 1260580 which replaces the Phone from the company by the personal phone number from the sender. But I couldn't find anything related to the email address
Can someone help me ?
Thanks for the reply.
That would be fine! but how do you activate this link with the userid ?
Similar Messages
-
Workflow step - send email - address of sender
Hi,
We are using workflow to register travels and leave requests and we are sending emails to the employees about eg. that their document has been rejected/approved. Emails are sent by user WFBATCH. Is it possible to change this user to some other one so that we could change the sender email address?
Thank you!Hello,
If you're usng a SendMail step then (if I remember correctly) it's always run in background and therefore always WF-BATCH.
Usually, if I want to do anything unusual with mails from workflow then I create a step which calls a task which calls a new method of my BOR object which calls fm SO_NEW_DOCUMENT_ATT_SEND_API1. See if you can specify the sender there.
Please let the forum know how you get on.
regards
Rick Bakker
Hanabi Technology -
Senders Email address in Dunning
Hi Guys: I want a generic email address for dunning letters. Currently the system picks up the email address of the sender from the User Profile. The client does not want to update the email address on every user but wants to use a generic email address to do this.
Please advise if there is a BTE that will do this where I can use a generic email address for the sender. Can I also do it in SCOT or SOST?
thanks very much!
BrianDOne ...implemented an OSS note to do this. thanks to me!
-
Webservice needs sender email address to be that of service user -how todo?
I host a web service. It is used by merchants in their web sites. My web service sends notifications to the merchants customers. Trouble is the sender email address is my web service email address and not that of the merchant. Some merchants do not like this and they want emails to their customers to be seen to come from them.
What would I (or the merchant) need to do in order to be able to set the sender email address to that of the merchant. Im assuming I can't just go ahead and set the sender to be any old email address! e.g. Im thinking Id have to use the merchants smtp host or something.You can set the sender to whatever you want; that's why there's spam.
Whether your SMTP server will allow you to send with any arbitrary sender is a different story.
If you run your own SMTP server, you can control this. Otherwise, yes, you would probably need
to use the merchant's SMTP server and login credentials. -
Sender email address verification
During my recent DNS server outage (caused by XO DSL suddenly turning on filtering of port 53), I noticed something quite interesting with .Mac server and I am wondering if there is a way for Tiger server users to EASILY implement the same feature to reduce the inflow of spam?
When my DNS stopped, my .Mac account STOPPED accepting email from my work account, essentially saying there was no such account on my work server.
I obviously do understand that the fact that my DNS was not working and my server could not be verified was the reason for this, but it got me thinking....
Is there any easy way to put this sort of incoming email verification process on my OWN Tiger server (work)? i.e. Only accept delivery of incoming email AFTER you verify that the sender email address DOES correspond to a valid email account on the senders host?? - which means no bogus email address or hostnames accepted...
I think this would help cut down on a lot of Spam as these guys often send junkmail via bogus accounts/host names that cannot be replied to.
Any useful information regarding setting this up would be most appreciated
Thanks in advance - RohinMy question is ... wouldn't it make sense to check whether sender emails are valid before accepting email server connections.
There's not really any way of doing that, besides, that's not really what you want.
What you want is to ensure that the email comes from the person that it says it comes from. What you'd get is that the email says it comes from a valid email address. This is not the same thing.
Even now, 99% of spam emails are sent from valid email addresses - it's trivial to put any email address in the 'from' header.
Knowing that the From address is valid doesn't actually do anything to say that the person in the From header is the one who actually sent the message in the first place.
There are several industry-wide attempts and performing validation at the domain level, which is about as good as it's going to get in the near term. For more information check out Sender Policy Framework which defines (via DNS) which IP addresses are permitted to send email for a particular domain, and DomainKeys which uses digital signatures to validate the email.
Since both models require input from the domain owners, they won't be 100% reliable until all domains opt-in to the schemes. For now it can help validate that an email is from a legitimate domain, but the absence of a SPF or DomainKey doesn't necessarily mean the message is spam.
The only way to verify that the email comes from a valid user is some kind of confirmation - an email comes into your mail system which doesn't recognize the sender, so it holds the mail and sends a message back to the sender saying 'who are you?" and "if this message is legitimate, follow this link to unblock the message". The message is forwarded only after the sender confirms their identity and that the message is legitimate.
This has all kinds of issues, though including latency (it takes longer for messages to get to you), delays (what if the sender sends the message right before they leave on a week's vacation?), and not least the complete lack of support for any kind of automated messages, list, etc. that are sent from non-humans. -
Hotmail - Sender email address is invalid
Hi,
Ever since I got my new iPhone 3GS, I have not been able to send emails. I had an izymail subscription for hotmail on my original iPhone and it worked fine. I synced everything over to my new iPhone 3GS and also made a new email account as Hotmail is now free to set up using POP3.
I turned my izymail account off because I was having problems with it fetching old deleted emails once or twice a week. Everything was working as normal until I tried to send an email and the following message appeared: "Sender email address is invalid"
I've tried switching my izymail account back on and switching my new Hotmail POP3 account off and my emails will send ok...
So why are my emails not sending with my newly setup Hotmail POP3 account?Sender Address invalid is the error message you get when your SMTP (outgoing email) settings are not working.
Many times this is because you are trying to use an SMTP server on a WiFi network and the ISP is blocking all SMTP connections that are not going to the ISP servers - this is to stop spammers.
Also, you will get this message when you try to use your SMTP server on 3G or Edge - the ISP sees a connection to their email server (SMTP) coming from AT&T (or your cell carrier) network not their own network and they think it is spammer so they deny the connection.
Some things to try - turn on the default SMTP server on the ipHone that corresponds to your carrier - when on 3G/Edge you can use this outgoing email server to connect without problems. Or, look to see if your ISP offers an email server on a different port (mine offers one on port 80 - all web browsers use this so other nets can't block it). Look for settings for authenticated SMTP servers - if your mail provider offers this it may be a way in also.
The search box (top right) will bring you many threads on this same subject. -
Change sender email address for payment advice
Hi,
I used FIBF to activate BTE 2040 to allow me email Payment Advice. This is working well and takes the 'Sender' email address from the user master data. I don't want to use the user master data so does anyone know how/where to change the sender email in the code?
I have copied SAMPLE_PROCESS_00002040 and can implement 2050 if needed but that seems to only modify the text of the mail - not the sender email?
Thanks.accounting Clerks need to be setup
-
Does Authenticated SMTP Ensure that the Sender Email Address Matches the Username/password Entered?
Does Authenticated SMTP ensure that the sender email address
matches the username/password entered?
<P>
Not by default. However, in netscape.mail.conf, you can set
RewriteFromUsingAuth and/or RewriteSenderUsingAuth to "Yes"
which will rewrite the header "From:" and/or "Sender:" to be
the authenticated sender of the message.
<P>
On NT, the keys are in the registry under
HKEY_LOCAL_MACHINE\Software\Netscape\Messaging Server\3.0\Dispatch\ConfigI found the answer.
Apple has turned on an app-specific password for iPhoto and other Apple apps. It's located in the Apple ID management section under Passwords and Security.
As soon as I entered that new generated password in iPhoto I was able to send a pic with my iCloud.com email address.
Now I know where to go. Thanks for your help. -
hi,
does anyone know how to set up BI to send out different ibots with different sender email address? currently it is global. From the EM Core application --> Deployment --> Mail then on the top you set the 'mail address of the sender'. That turns out to be the global sender email address for all the ibots. however, i have a requirement where i need to send ibot reports to show the sender as a different address for different ibots along with the recipient.
Thanks in advance for any inputs.
ShamolThanks SriniVEERAVALLI,
I tried to create a profile in the WLS and granted admin right; after that i tried to run an ibot 'Run as' that profile, however, after trying that it still shows up with the global sender email address as a sender.
Did you mean something different?
Thanks again, -
Changing sender email address via rewriting rules
My objective is to change my sender email address. For example, suppose my OCS email address is [email protected] and I would to send an email to [email protected]
John logs into yahoo mail and would see my mail. Upon opening my email, I would like John to see that the sender email address to be [email protected] so that whenever John replies my mail, the replied mail would go to [email protected] and not to [email protected]
I read the email admin guide and I configure the Sender rewriting rules within SMTP_OUT. I have key in the following within the Sender rewriting rules: $*@test.abc.com.my,$[email protected]
I restart the SMTP_OUT services and I check the log files in MIDTIER_HOME/oes/log/um_system/SMTP_OUT/12345
I found out that the rewriting rules have take effect on one of the lines.
Then I log into OCS as user Andrew with test.abc.com.my domain and send an email to yahoo.
I open my yahoo mail, which I receive the email.
However the sender email address remains unchanged which is [email protected]
How can I change the sender email domain?
thanks;
andrewYour observation is very correct in terms of symptoms, not of behaviour. We have numerous ER's there enabling header rewriting, too. Obviously for you, envelope rewriting works well, without to achieve the target you want to address. Please forward your request to Support Services with an Enhancement Request for native header rewriting.
Otherwise 3 ways:
1 Milter C-SDK
2 Milter general
3 relay accomplishing this task.
On 2,3 we have samples ready, for 3 in particular for postfix. -
Sender email address for Customer Account Statement
Dear Experts,
Here's an issue that my colleague and I are currently facing:-
The Customer Account Statements that are sent via email in the transaction F.27 show that the sender email address is not equals the Accounting Clerk (KNB1-BUSAB) maintained in customer master data (FD03). Instead, the sender email address here is the email address of the person executing the transaction F.27.
I've looked through some programs (RFKORK00 and RFKORD10), and the variant used (SAPMA). Unfortunately, we still could not determine the root cause for this issue. What should we be looking into, and how can we resolve this issue too?
Any inputs would be much appreciated. Thanks.
Regards,
DeborahHi Ajay,
Thanks for your input. Really appreciate it. Would you please enlighten me further?
"The accounting clerk’s name is then printed in any correspondence with the customers or vendors."
The statement above leads me to think that consequently, the accounting clerk's email address should be the sender email address for the mail that is sent to the customer.
Also, when I hit the 'F1' key on the Accounting Clerk (in transactions F.27 or FD03), the following texts are shown:-
"Accounting clerk
Identification code for the accounting clerk.
The name of the accounting clerk defined by this identification code can be used in the payment program for correspondence and reporting (for example, open item lists)."
Again, this leads me to think that the sender email address should be the accounting clerk's email.
P/S:
The customer is saying that this should not happen, so my colleague and I are just investigating this issue further.
Regards,
Deborah -
Sender email address name - add name
Hi All,
I am in CRM 5.0 CIC0 email editor and would like to change the sender email address - for display in recipient's mailbox not as recived from myCRM(at)app.com but rather to display as received from 'My CRM Company myCRM(at)app.com'.
I found BAdi IF_EX_CRM_MAIL_HANDLING~PREPARE_VISIBLE_NAME_FOR_ADDR, but have now idea how to prepare the address value. When I enter there 'My CRM Company myCRM(at)app.com' it throws me "Unknown error".
Can you help?
Regardsin the badi we need to write name and later email address in <> signs. then it will work
-
Sharing iCal calendar on iCloud. Sending email address is the same for everyone.
A group of us share a calendar so we all know each other's schedules. The problem is when sending or accepting meeting invitations, it always comes from the email address that is associated with the iCloud account. Can we change it for each system? Each local system should have iCal associated with their email address, not the base one.
It won't let me change my Apple ID email address it says "Email address is already verified for another Apple ID." when I try to change my email adress. The thing is, I have no other apple id's that I know of...Any help?
Jeremy -
10.7 SMTP Mail Logs send email address- Assign Postmaster?
How do you assign the SMTP mail log email address? I received an email this morning from another System Administrator (who previously administered this server), that he received the following message (I should be receiving these notifications, not him. To add: I was already the "Alert Email Address." Is there another location, where the SA's email address is set?):
From: Mail Delivery System
Subject: Postfix SMTP server: errors from server2.domain.com
Date: September 23, 2013 6:05:43 AM EDT
To: Postmaster
Transcript of session follows.
Out: 220 server.domain.com ESMTP Postfix
In: HELO XXX.XXX.XXX.XXX
Out: 250 server.domain
In: STARTTLS
Out: 454 4.7.0 TLS not available due to local problem
In: QUIT
Out: 221 2.0.0 Bye
For other details, see the local mail logfileI am having the same problem. I also can't send anything with attachments at all. Mail Just hangs there endlessly. This is a HUGE problem for me right now, and I don't feel like using entourage mail because it is not really reliable either. Does anyone know how to get a direct hold of Mac Telephone Support or engineering? I need to fix this problem like right now. We need to go back one level of code. Mr. Logic... This is my third day since I downloaded this code revision too, so please let me know what you find out, and I will do the same for you. I should have known better than to install this code without reading up on the issues and fixes.
[email protected]
Since downloading the 10.4.7 update I've experienced
the mail problem wherein emails can't be sent to the
smtp server. I've read all the discussions on all
the various fora, and tried all the fixes (e.g.
downloading the combo update instead, trashing mail
preferences, repairing permissions, setting up mail
again from scratch, looking for the SOCKS proxy,
resetting the PRAM, etc. etc. etc.) but all to no
avail.
Note that in my case the SOCKS proxy checkbox was
NEVER ticked/checked and so I couldn't uncheck it
(which was the fix that seems to have worked for most
people).
Anyway... last night I thought would try setting the
SOCKS proxy checkbox myself, so that I could then
uncheck it. (you never know!)
However, when doing this I noticed that any changes I
made to the proxy checkboxes in the Network system
preference panel ARE NOT SAVED.
i.e. If I tick one or more of them and Apply the
changes, then exit the Network Preferences panel, the
relaunch the Network Preferences panel, they are all
UNCHECKED again.
Is this related to my Mail problem? Any clues?
This is my 3rd day without the ability to send email
from the Mail client in 10.4.7. Not good.
Any help/suggestions appreciated.
Mr Logic.
Powerbook G4 Mac OS X (10.4.7) -
Why does Mail change the sender email address?
My email address from work has a subdomain: "[email protected]".
Although my mac Mail account is set up correctly with that email address in the account settings, when I send mail, users receive it showing that the sender (from:) is "[email protected]" - it drops the subdomain and replies to that address get bounced back.
Does anybody know why this is happening?
Thanks -In the From header of the copy of the message in teh sent box,
it reads correctly as [email protected]
Does this provide me a clue?
Sure it does. What you see in Sent is what Mail sends to the outgoing (SMTP) server. If the message gets changed afterwards, some agent other than Mail (probably the outgoing server) is doing it...
I know that Gmail’s outgoing server, for example, does this. In order to be able to use Gmail's SMTP server with another address, you must first enable that address in Gmail's Settings > Accounts page, and let Gmail validate it by verifying that you do indeed own it. If you don't do this, even though Mail will correctly send the message from the address you specify, Gmail's SMTP server will silently change it to the address associated with the Gmail account that corresponds to the username specified during SMTP authentication, instead of refusing to send the message as other SMTP servers would do in those circumstances.
Maybe you are looking for
-
How to get songs back on iTunes once uploaded to iCloud & deleted off hard drive?
I have my 10,000 song library saved on an external hard drive. I got the subscription to help limit used space on my laptop hard drive. I started iTunes Match with my entire library (external drive) and uploaded my entire 10,000 songs. Once comple
-
I have a 1st generation iPad. I know I can't upgrade to iOS6. Because of this I can't update the iTunes and App Store apps on my iPad as they are integrated in the iOS software. Since Apple choses to not support 1st generation iPads with iOS updates
-
Show description in KM navigation iview
hi, all when i new a KM navigation iview, i can see the name, size, last modify time. can i make some configuration to show description in the list? thx in advance.
-
Export customized process template
Hello All, We have a Team Project with many customization's in it. Is there any way to export that entire Process Template? I need to create another team project with exact customizations. We are using Team Foundation Server 2013 RTM Version. Thank y
-
Color shift when pasting from CMYK document to RGB document
Hello, We're creating an image for a client that will eventually be printed 4c process, and we have to use some very specific CMYK values. However, since we need to use certain layer effects, we need to work in RGB. I assumed that since the CMYK valu