Sender FFC configuration

Hi experts,
     6.      Under Recordset Structure, enter the sequence and the number of substructures as follows: <NameA,nA,NameB,nB,...>, where nA=1,2,3,... or * (for a variable, unlimited number, including 0).
       7.      You define the start and end of recordsets containing a variable number and arrangement of structures as follows:
○       Ascending:
The sequence of the recordset structures is assumed to be unique. A new recordset is started as soon as an earlier structure occurs.
○       Variable:
The sequence of the recordset structures is assumed not to be fixed. A new recordset is not started until another structure occurs that is defined with a fixed number. If all structures are defined as variable, the system interprets the entire document as a single recordset.
above is from help.sap, however i could not understand it clearly, can any one provide a detail example to explain at which condition we need to specify "Variable"?
any hint would be appreciated.

Do not post duplicate threads. One thread deleted.
Regards,
Prateek

Similar Messages

  • No sender agreement configured in the XI Integration Directory

    Hi,
    I am using MPA(MML) message format in XI scenario. My scenarios are R3->XI->Marketplace and Marketplace->XI->R3. The first scenario works fine with no problems where as when i try to post MML message from marketplace to XI system, i am seeing the "No sender agreement configured in the XI Integration Directory for the given message header:SenderParty=xxxx; ReceiverParty=; SenderService=xxxxx; ReceiverSerivce=xxx; Interface=xxxx; InterfaceNamespace=xxx;". I have created sender agreement for this secenario, and moreover i haven't this sender agreement in the xi cache. Please let me know if i am missing anything in the configuration.
    Thanks & Regards
    Sruj

    Thanks a lot for replies, but i have tried all these options but no luck. Does it need any additional configurtion to resolve this issue, i dont think this is cache issue, if that is the case after all steps which i have done should have fixed it. Please post your comments.
    Once again thanks a lot for everyone.
    Thanks & Regards,
    Sruj
    Message was edited by: Srujan Gogineni

  • Synchronous file adapter sender side configuration in sap pi

    Hi Experts
    synchronous file adapter sender side configuration in sap pi
    can you explain any one tell me step by step procedure?
    Regards
    Sagar

    Hi,
    You can use RequestResponseBean in the sender file adapter module .
    RequestResponseBean (SAP Library - SAP Exchange Infrastructure)
    Request/Response Bean for IDOC_AAE adapter
    Instead of IDOC_AAE adapter you can use FILE adapter.
    Regards,

  • Xlink sender adapter configuration

    Hi All,
    Please can you send me a xlink sender adapter configuration. In my scenario, the Eancom message is coming from a third party and getting posted into SAP in the form of an Idoc.
    I am using Transport as Servlet (AXIS) and message protocol as AXIS. The adapter type chosen is SOAP.
    Regards,
    M Manohar.

    Hi
    Go thr the below links
    Sender Adapter: http://help.sap.com/saphelp_nw04/helpdata/en/45/a39e244b030063e10000000a11466f/content.htm
    Receiver Adapter: http://help.sap.com/saphelp_nw04/helpdata/en/45/a3c48c87cd0039e10000000a11466f/content.htm
    Modules and parameters: http://help.sap.com/saphelp_nw04/helpdata/en/45/a4a36de28552f7e10000000a1553f7/content.htm
    Regards
    Sreedivia

  • Error on Send Port configured using HTTP adapter

    Hi All,
    For Load balancing purpose we have created new host and host instance and changed send handler for send port configured using 
    plain HTTP adapter.
    We are getting below error after change:
    A password is mandatory if UserName is specified
    Parameter name: Password
    Please advice.
    Thanks
    Pooja Jagtap Software Engineer KPIT Cummins

    Have you updated the password for your Host instance . Try restarting your host instance once .
    Thanks
    Abhishek

  • Can anyone send me configuration guide of scheduling agreement

    it is very urgent can any one send me configuration guide of scheduling agreement..
                                                     With Regards
                                                   Prasanta Kumar Sahu

    Dear Sahu,
              Go through this links these will help you in the Scheduling agreement processing and configuration.
    http://help.sap.com/saphelp_47x200/helpdata/en/78/2085347860ea35e10000009b38f83b/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/33/4361299d7a11d194e200a0c9306794/content.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm
    I hope it will help you
    Regards,
    Murali.

  • Hi, can anybody send the configuration steps of SOLUTION MANAGER

    hi,
    sap gurus,
    can any body send the configuration steps of solution manager
    its easy but logical
    plz help me on this.
    id is timmampalliatgmaildotcom
    regards,
    balaji.t
    09990019711.

    Hi
    Refer to this link
    http://help.sap.com/saphelp_sm40/helpdata/en/45/51fbdbd4941803e10000000a1553f7/frameset.htm
    Raghu

  • Can any one send CFM configuration document.

    hi all,
    can any one send CFM configuration document.
    it is urgent.
    Thanks
    Ramakrishna

    hi all,
    can any one send CFM configuration document.
    it is urgent.
    Thanks
    Ramakrishna

  • Can any body send HUM configuration settings

    hi,
    can any body send HUM configuration or documentation apart from standard liabrary, please.
    regards,'
    balajit

    Hi,
    Please check following best practices link. I hope this helps you.
    http://help.sap.com/bp_bblibrary/600/HTML/G74_BB_EN_US.htm
    Regards,
    Abhee

  • File Sender Adapter configuration

    All,
    We need to pick up the files of following format ".dtx.dat" and ".gtx.dat" in the sender adapter.
    we also need to exclude any file with the name in the format - ".err.dat" and ".exc.dat".
    How can you configure a single communication channel for this? (All the files have the same source directory "/data/inbound"
    Thanks.

    Hi,
    This link might help you!!
    /people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
    I'm working on that I'll update the thread soon!!
    Best regards,
    raj.

  • No Sender Agreement Configured in Dual Stack( PI 7.31)

    Hi All,
    I am configuring a simple file to file scenario.
    Initially i Have created the scenario without ICO and It worked fine.Later I changed this ( ie, I have deleted sender agreement,Interface determination etc)
    and used ICO to configure.
    But I am getting the below error.
    If the configuration is based on ICO,I don't think sender agreement is required.Please help.
    Regards,
    Tibin Joseph

    Hi Tibin,
    Please, if your issue is solved close the thread according this How to close a discussion and why
    In this way further SCN members can figure out how to resolve their problems easier.
    Regards.

  • JDBC Sender Adapter Configuration

    Hi All,
       i want to know if we can configure JDBC sender adapter to run only when we ask it to.
    Normally what happens is tht the JDBC Sender Adapter polls the database at specified intervals, i dont want that. I only want it to poll the database when i get a file from RFC.
    Regards,
    Sumit

    Hi,
    Thank you.I had posted a similar questions a few dayz back and someone said that if we make the jdbc adapter synchronous it would solve our purpose, but it wont.
    Bhavesh i went thru ur blog in the mornin b4 postin d question..btw itz a nice blog
    Domenico : this is not what im looking for.
    Cheers,
    Sumit
    Message was edited by: Sumit Khetawat

  • JMS Sender adapter configuration

    Hi,
    I have a problem in configuring my JMS sender adapter. My source structure is in the form of a FIXED lenght file.
    Its structure is as follows:
    Rec ID                       Required                 Loop repeat 
    SHC                               R                              1
    SCO                               R                              1
    SAM                               O                              n
    SCD                               R                              1
    SCP                               O                              n
    LTX                                 O                              n
    SCC                                O                             n
    SUM                               R                              1
    where R indicates Required record type
              O indicates Optional record type
    1 indicates the record type occurs only ONCE in a record
    n indicates the record may occur 0 to unbounded times in the record.
    This is how I have defined my record set structure in the Module tab of the JMS adapter configuration.
    SHC,1,SCO,1,SAM,,SCD,,SCP,,LTX,,SCC,*,SUM,1
    The problem with this configuration is that the adapter expects the input file in this format
    SHC
    SCO
    SAM
    SAM.
    SAM
    SAM
    SCD
    SCD
    SCD
    SCD
    SCP
    SCP
    SCP
    SCP
    LTX
    LTX
    LTX
    LTX
    SCC
    SCC
    SCC
    SCC
    SUM
    Whereas my input file format has the following structure
    SHC
    SCO
    SAM
    <u>SAM</u>
    SCD
    SCP
    SCC
    SCD
    SCP
    <u>SCP</u>SCC
    SCC
    SCD
    SCP
    SCC
    <u>SCC</u>
    Could please tell me how I can handle this in my adapter config. I have gone through the following How To guide "How to ...Use the Content Conversion Module within the XI 3.0 J2EE JMS Adapter" but dont find how I can do this.
    Cheers.

    HI,
    Please see the below content conversion parameters
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
    Regards
    Chilla

  • Seeburger - XI AS2 Adapter Sender service configuration

    Hi,
    I need to know how to configure the seeburger AS2 adapter sender service in XI ( EDI -
    > IDOC).
    I have some pre-requisites that are needed to setup.
    1. SSL certificate
    2. AS2 Certificate (public key)
    Kindly anyone provide me the guidance or if any docs/pdf's. your help is appreciated.
    Thanks,
    lakshmi

    Refer these
    EDI Adapter by SeeBurger
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
    B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
    Integrating XI with SeeBurger
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
    Thanks

  • Sender AS2 Configuration...

    Hi All,
    I am doing configuration on AS2 (AS2 -> File)..
    We are getting the EDI Messages. Thru Sender AS2 CC, how to pick the messages into XI...
    Please help me out ...
    Thanks in advance..
    Regards,
    Vasu

    Hi,
    I will tell you something about Seeburger Adapters in detail, Just see if it helps...
    Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
    These transformed EDI-XML messages are then converted to EDI specific format using the Seeburger's BIC(Business Integration Converter)adapter. In addition, Seeburger provides adapters like AS2,FTP(EDI specific) and so on to route these EDI messages to external EDI Partners.
    Seeburger EDI Adapter leverages SAP XI's Adapter Framework. This Adapter is used to perform conversion between EDI and XML format. It also provides some canned EDI layouts and the ability to build your own. It is used to transfer the EDI message via HTTP or AS2 protocols.
    The most direct way of using the Seeburger adapters is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to do the following:
    1. define or import the inbound message metadefinition in various formats ( edifact, xml,...)
    2. using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
    3. create a one to one mapping between input en output.
    4. export the metadata in xsd or sda format for import in XI
    5. generate an SDA which can be deployed in XI and used as a module.
    Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf

Maybe you are looking for

  • Can't open Project 2010 file in Project 2007

    I am trying to open a Project 2010 file in Project 2007, I get an error that asks if I would like to download the converter and I say yes and get a generic product page for Project 2010. I can't locate the file that I need, how do I find it?

  • How do i create a calendar

    how do i create a calendar

  • How convert to jpg picture into bmp ?

    Hi experts, I am trying to convert my jpg picture into bmp. for this i write one report but showing some TRANSFER WA_MIME1 TO DSN1. HERE IS MY FULL CODE PLZ HELP ME. REPORT  ZSE78_7. DATA: blob TYPE w3mimetabtype,        blob_size TYPE w3param-cont_l

  • Imovie stuck on creating movie

    I created a slideshow and when i go to share, file and save it to my documents it doesnt save, it gets stuck on creating movie in the theater, there is no progress in the bar. Help! what am I doing wrong?

  • HT201303 How do I cancel a payment in the App Store ?

    I want to make a purchase in the App Store . But it needs the security code of the credit card but its my mum's credit card and she's not in town. So I decided to cancel the payment so I click cancel but when I want to download other apps , it keeps