Sender Namespace and Sender Interface in the IDOC to IDOC scenario

My question maybe very basic...
It is SAP IDOC to SAP IDOC scenario.
Lets assume that I have done config in XI for:
             Sender = A,
             Interface = B,
             Namespace = C.
My question is:
Is there a place in the source system or somewhere to point that
when an IDOC e.g. DEBMAS is triggered in the source system,
then the Interface should be B and Namespace should be C in the xml file ?
Cheers
Agnie

Hi Agnieszka,
Check these threads/blogs from you may get some help:
/people/michal.krawczyk2/blog/2005/11/21/xi-idoc-to-idoc-tunneling--how-fast-and-easy-can-you-get
Idoc-to-idoc scenario
IDoc to IDoc scenario necessary configuration steps
For A-Z help on IDOC, you can refer Michal's book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi IDoc Business Scenarios with SAP XI</a>
Regards,
Subhasha Ranjan

Similar Messages

Unable to send messages and "send" function is unavailable when replying to a message.

I m unable to send messages and "send" function is unavailable when replying to a message.
My device is BB device model is 7290
IT Support Analyst

Typically this means a corrupt xxxxx [CMIME] service book. Go to Options > Advanced Options > Service Books. Highlight the xxxxx [CMIME] service book and press delete. Wait 30 seconds click the track wheel and select undelete. If this doesnt work you can have the service books resent by your BES admin (if BES connected) or send them to yourself from the BIS website (if its a BIS account).

Cisco 877w -Configuration of subinterfaces and main interface within the same bridge group is not permitted

Hi,
I have another problem - after upgrade ios wirelles connection not work.
After reload i have :
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
STP: Unable to get the port parameters.
Please configure the bridge group on this interface first.
Please configure the bridge group on this interface first.
Please configure the bridge group on this interface first.
SETUP: new interface NVI0 placed in "shutdown" state
my old configuration work propertly in the old software, but after update i have notificatio.
Old thread:
https://supportforums.cisco.com/discussion/12379491/cisco-877w-no-wireless-connection
my current sh run:
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname cisco
boot-start-marker
boot system flash:c870-advipservicesk9-mz.124-24.T6.bin
boot-end-marker
logging message-counter syslog
logging buffered 4096 informational
enable secret 5 $1$eCNp$rWuBfZ/cexnwnkm7L447s.
aaa new-model
aaa session-id common
dot11 syslog
dot11 ssid ciscowifi
vlan 1
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 050D031D26595D0617
dot11 wpa handshake timeout 500
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.56.1
ip dhcp pool CLIENT
import all
network 192.168.56.0 255.255.255.0
default-router 192.168.56.1
dns-server 8.8.8.8 194.204.159.1 194.204.152.34
lease 0 2
ip cef
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
username marek password 7 00121A0908500A
archive
log config
hidekeys
ip tcp path-mtu-discovery
bridge irb
interface ATM0
description Polaczenie ADSL do ISP$ES_WAN$
no ip address
no atm ilmi-keepalive
pvc 0/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
hold-queue 224 in
interface FastEthernet0
description Edzia
interface FastEthernet1
description dom
interface FastEthernet2
description Dziadek
interface FastEthernet3
interface Dot11Radio0
no ip address
no ip redirects
ip local-proxy-arp
ip nat inside
ip virtual-reassembly
no dot11 extension aironet
encryption vlan 1 mode ciphers tkip
encryption mode ciphers aes-ccm tkip
broadcast-key change 3600
ssid ciscowifi
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
world-mode dot11d country AU indoor
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.1
description ciscowifi
encapsulation dot1Q 1 native
no cdp enable
interface Vlan1
no ip address
bridge-group 1
interface Dialer0
description Interfejs dzwoniacy
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp chap hostname [email protected]
ppp chap password 7 xxxxxxxxxxxxxxxxxxxxxx
interface BVI1
description Polaczenie dla sieci LAN
ip address 192.168.56.1 255.255.255.0
ip nat inside
ip virtual-reassembly
no ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
no ip http secure-server
ip nat inside source list 100 interface Dialer0 overload
ip nat inside source static tcp 192.168.56.10 80 interface Dialer0 80
ip nat inside source static tcp 192.168.56.10 22 interface Dialer0 22
logging trap debugging
logging 192.168.56.10
access-list 100 permit ip 192.168.56.0 0.0.0.255 any
access-list 100 deny ip any any
no cdp run
snmp-server community ciskacz RO
snmp-server chassis-id ciskacz
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
no modem enable
line aux 0
line vty 0 4
exec-timeout 0 0
transport preferred ssh
transport input ssh
scheduler max-task-time 5000
end
please help - thanks!

Hello Marek,
I suppose you are not planning to do any kinds of advanced config using several VLANs and multiple SSIDs so let's just make your configuration simple and working.
In short, you need to remove all references to VLAN 1 and to any subinterfaces possibly related to the VLAN 1. This means in particular (follow these steps in sequence):
Remove the Dot11Radio0.1 subinterface entirely
In the Dot11Radio0 section, remove the encryption vlan 1 mode ciphers tkip command
In the dot11 ssid ciscowifi section, remove the vlan 1 command
After performing these steps, make sure that the ssid ciscowifi and encryption mode commands are still present in the Dot11Radio0 configuration, and if not, reenter them.
Best regards,
Peter

ACE bridge and routed interface in the same context

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:Standardowy;
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Hello
I am wondering if it is possible to configure one ACE context to support both routed and bridge interface?
I would like to have a bridge-mode context but in the same time I would like to have a separated OOB interface for management.
If it is possible how they could interact to each other?
Thank you in advance for any answer
Regards
Lukasz

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:Standardowy;
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Hello
We've just tried to configure bridged and routed interfaces at the same time in the lab and we've had a problem.
When we added the def gw for the bridged config we noticed that we had an issue with the traffic src by the rservers in the routed config.
When we deleted the new def gw, the problem disappeared.
I am attaching the lab config.
When we added to it the following line
ip route 0.0.0.0 0.0.0.0 10.1.1.163
reals B1-B10 could not communicate to the outside world.
Do you know why it does not worked and what could we do to fix it ?
Thank you in advance.
Regards
Lukas

SOAP sender adapter and several interfaces

I have several interfaces and want to connect them via SOAP sender adapter. How can I use 1 communication channel for this interfaces? or do i need to create communicaton channel for each interface?

Hi,
you can't use one communication channel, cause you got different WS.
As you have a WS individual parameter (
SOAP action) in the communication channel you need individual communication channels.
A workaround would be to develop a >wrapper WebService< and deploy it on the backend. This Wrapper is able to call the different other WSs.In this case you need only one CC. Additionaly you need a parameter, which tells the wrapper-WS which individual WS he has to call.
Regards Mario
Message was edited by:
Mario Müller

Want to find a fitness GPS app that will allow you to receive and send messages and calls while running the app

I love my blackberry 8900 and have found some cool fitness gps apps that track my distance, etc. The problem I have is I can't figure out how to access incoming messages or how to send a text message while keeping the app active. There are pause buttons on the ones I've used, but if I try to get out of the app screen it will log me off the workout completely. Now granted, I don't do a lot of texting during my workouts (cycling) but still - would be nice to be able to pause it and maybe send something liek "home in a few mins " then continue on with the same workout.

I figured it out - I programmed my left side button to go straight to my IM program. I can send and receive messages and go back to my workout without stopping it

WLC-2106 and multiple interfaces on the same network

Hi there,
I recently created a TAC request to the Cisco support regarding our WLC-2106, but they could not help me. Basically I just learned that you can create new interfaces for the wireless LAN controller and then dedicate them to a given wireless network (SSID). This way I could more effectively utilize network bandwidth also. Problem is that all of the interfaces have to be in a different network segment in order to work, which is not what I want. I specifically want to have several interfaces on the same network segment.
Has anyone tried to accomplish the same?

Basically what I've misunderstood is that all the traffic generated by our wireless clients have been going through the single 100Mbit/s ethernet port on the wireless LAN controller (management interface), and to mitigate this I thought I could create new interfaces (ports) and dedicate those to given WLAN networks.. I see now that this is not supported. Not inside the same network at least.
So, by reading further and consulting my best friend Google I learned about a setting called "AP Mode". Changing that from Local (the default) to H-REAP the APs should not route their traffic anymore through the management interface on the wireless controller, but instead route all the client traffic directly to the local LAN. This way you effectively remove the 100Mbit/s bottle-neck when all the APs were using the management interface both for configuration and client data traffic.
It seems you also have to enable H-REAP Local switching from a given WLAN network in addition to changing the AP Mode of your access points to H-REAP. I'm still in the testing phase here so should anyone have any insight to this, I'd be greatful to hear more.

HT1338 My system is up to date - I've been at this all day - why can't my gmail account send mail and keep it in the sent folder is all I want to know - I would appreciate it if someone can help me fix this bcs no one I have called is able to figure it ou

I've been asking everyone I can think and no one seems to know the answer - very frustrating but my god, it's only a gmail account - why can't i send mail from the laptop? someone told me I would have to pay $90 for an application that's missing on my macbook air, I say gmail is free, why do I have to pay for it and they hang up on me - guy at apple store doesn't know what the problem is, it guys at work are being snobby about the type of phone i have - i only want to send mail from my gmail account and i am unable to do so from the laptop - i don't know why i'm bothering to put this here because no one has an answer

Have you tried contacting Gmail tech support?

Can anyone help new to this, e.mail slow I tried to send photo and in error attached the application so got bounced back now can't delete it and email changed in a real mess can't seem to delete anything or receive stuff on macbook pro

Hi any help out there, I have messed up e.mail should have had some training. I tried sending photo as attachment to e.mail but attached the whole application, of course this got thrown back, tried to delete it no luck . Now at a loss what to do mail box and mac now sooooo slow and cant seem to get rid of deleted mail??? comes up with error from imap server for gmail message to large ..has anybody else had this ?

If the message is still 'stuck' in your gmail account, you should be able to log into the web service and delete it. Don't know why it won't delete on the Mail side. Quitting Mail should delete the sent msg - don't know why it doesn't.
Give it a shot...
Clinton

HT201320 Trying to send mail and receiving error msg "the recipient was rejected by the server"

Setting up new email account and getting above MSG when trying to send. Can receive mail ok to the account. Can send/receive fine to other accounts on the device.

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

Send webpage, send text, and send image on the webpage I am currently browsing

Can you please explain how I can send a webpage I am browsing by email? Is there an icon or add on feature on Mozilla that I can use?
Thank you.

First, please update Firefox to 16.0.2. [[Update Firefox to the latest version]]. Then try an addon such as [https://addons.mozilla.org/en-US/firefox/addon/email-this https://addons.mozilla.org/en-US/firefox/addon/email-this]

PI 7.1 Sender Interface and Receiver Interface gets interchanged

Hi All,
I m facing a strange problem in PI 7.1
For many of my scenarios, the Sender Interface, sender namespace and receiver Interface, receiver namespace information gets interchanged and displayed incorrectly.
But sometimes its working fine.
When we analysed the Log messages, found that, after xml validation step, the sender and reciever interface gets interchanged.
Any idea why this happens?
How to rectify this error?

Aarthi,
Please check your message interfaces once again. Sender is outbound and Receiver is inbound.
Also please check your receiver determination.
Regards,
---Satish

Configuring IDOC to file Scenario in PI 7

Hello All,
I am doing an IDOC to file scenario, all the configuration is done. When i trigger the outbound IDOC, I can see in SXMB_MONI the sender component, sender Namespace, sender interface and reciever component are coming up correctly as configured.
1. But the reciever namespace and Reciever Interface are having the same values as the sender namespace and sender interface interface respectively. I am sure they have to be as per the config in ID.
2. Also on further going into the error message
SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_ERROR</SAP:Code
SAP:AdditionalText>No standard agreement found for , DEV400, ANZ, BC_RECV_PAYM_ORD, urn:sap-com:document:sap:idoc:messages, PAYEXT.PEXR2002</SAP:AdditionalText>
Can anyone please suggest , what is it that I am doing wrong.
---Prashanth

Hi,
Please delete the Receiver determination and try creating again. refresh cache.
Can you please have a look at the sap notes if of any use .. i think its a different case altogether , but pls have a look.
SAP Notes 1278244- https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1278244
SAP Note 1284103 -https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1284103
Regards,
Srinivas

Code to retrive the sender and receiver interface names using custome adapter module

Hello Team,
I want to develop an custom adapter module which could retrieve the names of the sender and receiver interfaces of the scenario and for that i am trying to use com.sap.aii.af.service.administration.api.monitoring.ProcessContextFactory.ParamSet but i don't know whether this API will support or not and also i don't know how to develop the code using this API so please suggest me some code for it so that i could retrieve the names.
Thanks you all in advance.
Regards,
Avinash.

Hi,
Just ASMA setting will do the needful. Are you planning to rename your target file name. If yes then only you will require UDF.
Update: Since your directory name will be taken from source file name then you have to use mapping for this, else it will not be possible.
I don't know if creating a new module for this will help you solve the issue, but in that case rather creating adapter module, mapping will be easier.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Dec 7, 2009 3:04 PM

Best way to write objects in an xml and send the file?

hello all
i am making some objects, which i conver to xml using the XStream and then i am saving them to a file, call a function to send the file to a servant (basically i do this by sending bytes and this may be the problem). In the servant i take the data i write them to a file and then i read them again to make them objects...
i have the following code in the client
        XStream xstream = new XStream(new DomDriver());
        xstream.alias("Jobb", WorkflowFramework.Jobb.class);
     String xml = xstream.toXML(translation);
           FileWriter fw = new FileWriter("translation.xml");
           ObjectOutputStream out = xstream.createObjectOutputStream(fw);
           out.writeObject(new Jobb("ougk2", "Walnes",null));
           out.close();
           File file=new File("translation.xml");
           byte buffer[]=new byte[(int)file.length()];
           try {
                BufferedInputStream input=new BufferedInputStream(new FileInputStream("translation.xml"));
                input.read(buffer,0,buffer.length);
                input.close();
           } catch(Exception e) {
                  System.out.println("Error: "+e.getMessage());
                   e.printStackTrace();
           theRemoteObjRef.translationService(theCallbackObjectRef, buffer);i write the file and then i read it so as to have a buffer of bytes (there should be a better ways..)
the last line sends an objectRef (we dont care about that) and the file in bytes to a server (to be specific to a servant of a server)..
in the servant i do the following
public void translationService(TheCallbackInterface objRef, byte data[]){
          try{
                    File file = new File("translation2.xml");
                BufferedOutputStream output = new BufferedOutputStream(new FileOutputStream("translation2.xml"));
              output.write(data, 0, data.length);
              output.flush();
              output.close();
          } catch(Exception e) {
                    System.out.println("Error: " + e.getMessage());
                    e.printStackTrace();
           XStream xstream = new XStream(new DomDriver());
           try { // If an error occurs, go to the "catch" block
                FileReader fr2 = new FileReader("translation2.xml");
                ObjectInputStream in = xstream.createObjectInputStream(fr2);
                Jobb newJob = (Jobb)in.readObject();
               System.out.println(newJob.getObjServerRef());
               System.out.println(newJob.getForTranslation());
               System.out.println(newJob.getTranslated());
                }catch (Exception e) {
                     System.err.println("File input error"+e);
                Jobb testJob=new Jobb("ougka","mpougka","falalala");
                System.out.println(testJob.getObjServerRef());
                   System.out.println(testJob.getForTranslation());
                System.out.println(testJob.getTranslated());
the problem is that in the first group of System.out.println i get the error File input errorcom.thoughtworks.xstream.mapper.CannotResolveClassException: Jobb : Jobb
but the second group of printlns, prints the correct results...
do you know what is the problem? Why can i read the content of the file and get the objects from there?
do you have any suggestions of writing and reading the file in an another way or to send it by NOT using a bytes array?
do you have an alternative way of making the xml file?
many thanks!

Hi,
I would suggest to reconsider building of your document so that it doesn't contain duplicates if you don't need them. And it doesn't have much to do with DB XML then.
Also you could insert your document with duplicates and use XQuery Update facilities to delete undesirable nodes.
Vyacheslav

Sender Namespace and Sender Interface in the IDOC to IDOC scenario

Similar Messages

Maybe you are looking for