Senders Name - System ID

Dear Experts
<u><i>SAP R/3 4.7</i></u>
We are having a setup to send workflow work-item to external e-mail address as well and SAPconnect is place and working fine.
Question:
When SAP sending these workflow work-items to external e-mail the sender name is System ID <b>(i.e., S00 for instance)</b> is there a way to change this sender name to some meaning full customer defined text?
Thanks in advance for the expert advices…
Best Regards,
A. Riaz

Hi,
You will have to configure Workflow System Administrator.
Go to transaction SWU3, and then to
"Maintian Workflow System Administrator".
All outgoing mails will then take the name of this administrator.
Hope this helps..
Regards,
Shashank

Similar Messages

  • IPhone 6 - Voice of Senders Name Alert

    I just switched back to iPhone after deciding the Note 3 was not my thing. Anyway Android had a feature that instead of a message alert tone, you could also use a feature that would say the senders name if it was in your contacts. The same is true for an incoming call. Instead of a ring tone, it would say, "Bob is Calling".
    Does this feature exist in the Apple world?
    Thanks!

    No, that is not a feature of the iPhone. You can certainly make your own ringtones for your contacts and assign them.

  • No Senders Name for Messages

    Hi All,
    I have been having this problem for some time now over various different versions of PC Suite.
    My messages sync fine with my PC and I can read them all and it is all correct, however in the "From" field when viewing from the PC I only get the phone number of the sender not the Name.
    I have tried;-
    syncing my contacts with outlook and with the phone browser.
    making sure that the phone numbers all have +44 in front of them (to make the number exactly the same)
    deleting everything and re-installing.
    4 or 5 differnet phones over 2 or 3 years
    I do not know for sure if it should show the senders name in the phone browser (although I beleive I recall it doing so some years ago...).
    Can anyone give me any pointers as to where to go from here? it would be realy usefull if I could see the names rather than the numbers
    Currently on:
    Windows XP Pro 32bit
    Service Pack 2 (from admin install)
    PC Suite 6.82.22.0
    Phone Nokia 6233
    TIA
    Gareth Westwood

    As Sylvian pointed, metaverse has GUID assigned to every object.
    But I am wondering something else:
    I queried mms_metaverse in FIMSynch DB
    Why are you querying database itself? Any operations strictly on DB are not supported as for querying and admin operations you have FIM Sync console...
    If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

  • SAP NetWeaver DNS Domain Name System for SAP?

    Hi all,
    I need to install SAP Netweaver 7:01 SR1 ABAP Trial Version.
    I use Microsoft Windows XP.
    During the installation process asks the DNS Domain Name System for SAP.
    What should I put in this field?
    Following is the result of ipconfig:
    Ethernet adapter Local Area Connection 2:
    Connection-specific DNS Suffix....:
    IP Address.....................................: 10.10.0.10
    Subnet Mask..................................: 255.255.255.0
    Default Gateway...........................:
    The name of my machine is solaris.
    In the host file put the following:
    10.10.0.10 solaris
    I very much appreciate if someone can help me.
    Viviane

    Hi Viviane,
    Please check this thread:
    Error:Reverse lookup of address failed:(NW7.01ABAPTrailVersionInstallation)
    http://en.wikipedia.org/wiki/Domain_name_system
    Hope it helps.
    Regards,
    Arun

  • Need Help Please Log Name: System Source: Microsoft-Windows-Kernel-Power Date: 11/10/2010 4:31:37 PM Event ID: 41 Task Category: (63)

    Log Name:      System
    Source:        Microsoft-Windows-Kernel-Power
    Date:          11/10/2010 4:31:37 PM
    Event ID:      41
    Task Category: (63)
    Level:         Critical
    Keywords:      (2)
    User:          SYSTEM
    Computer:      Felix-PC
    Description:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
        <EventID>41</EventID>
        <Version>2</Version>
        <Level>1</Level>
        <Task>63</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000002</Keywords>
        <TimeCreated SystemTime="2010-10-11T06:31:37.175213500Z" />
        <EventRecordID>96455</EventRecordID>
        <Correlation />
        <Execution ProcessID="4" ThreadID="8" />
        <Channel>System</Channel>
        <Computer>Felix-PC</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="BugcheckCode">244</Data>
        <Data Name="BugcheckParameter1">0x3</Data>
        <Data Name="BugcheckParameter2">0xfffffa8002d20b30</Data>
        <Data Name="BugcheckParameter3">0xfffffa8002d20e10</Data>
        <Data Name="BugcheckParameter4">0xfffff80002fcd5d0</Data>
        <Data Name="SleepInProgress">false</Data>
        <Data Name="PowerButtonTimestamp">0</Data>
      </EventData>
    </Event>

        <Data Name="BugcheckCode">244</Data>
    244 (dez) = F4 (hex)
    Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION -
    This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.
    Cause
    Several processes and threads are necessary for the operation of the system. When they are terminated for any reason, the system can no longer function.
    Please copy the dmp files from the folder C:\Windows\Minidump first to your desktop, zip all dmp into 1 zip file and upload the zip file to your Skydrive [1] and post a link here, so that I can look at the dumps with the debugger and to to see the cause of
    the crash.
    André
    [1]
    http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

  • Windows mail on external drive does not show senders name, only an odd alpha/num. file name. How to view by sender to sent to name ?

    Hello,
    I have downloaded from a PC to an external drive my windows mail files (sent, inbox, etc). I can view the files on the PC by changing headers to add senders name, etc.
    However, when viewing on my MacBook Pro, I can see all the files but the they are labled with a mixed alpha/numberic file name and not the sender, etc. Can the sender and/or sent to names can be added as searchable fields ?
    Thank you,
    Mike B.

    Enterprise manager still requires a static service definition in listener.ora and does not rely on dynamic registration.
    From documentation:
    The SID_LIST is required for backward compatibility with Oracle8 or Oracle7 databases, as well as external procedures and heterogeneous services, and some management tools, including Oracle Enterprise Manager.
    Werner

  • Displaying Senders name when receiving a text mess...

    Hiya,
    Not sure if there is an app or a way of doing this - but can you download something for the N96 that when you get a text message come through, instead of it just saying "1 New Message" it'll say "1 New Message from x" where x is the senders name?
    Just a little tweak really that'll be nice I suppose! Tried searching for a similar question on here, and there may well be one but I didn't get through all the pages...
    Thanks for help!

    Psycho, once again you amaze me. How do you find out about all these little applications that I've never even heard off? Must get you to send me a list of applications you have and what they are for.

  • How to chage logical system name SYSTEM ECC6.0

    Dear Experts,
    We need one help, in one of our production client which is on ecc6.0 and on oracle. in that when we are executing transaction rsa1. its giving error " logical system name has been change for this system ",
    then later on we have found that the logical system name in table T000 has been changed , so now we need revert back orignal name, so we require your help to do proper step to revert back the name, also we requre what other things we need to change with respect to logical system name...
    Need your help on this issue we request your immediate support for this.
    Regards
    Yogesh

    Hi Yogesh,
    Hi Anil,
    1) Logical System Name can be changed using SALE transaction.  Go to ALE -> Sending and Receiving System -> Logical Systems -> Define Logical Systems.
    2) After changing Logical systems you have to check partner Profile using WE20 and do the necessary modifications. if required
    Hope this solves your issue.
    Regards,
    Karthik

  • Change name system landscape in System Landscape overview

    Hello colleagues,
    How to change the name productivo in system landscape overview?
    In the properties object i cant modify,
    Thanks

    right click to the object select open --> properties and change the name... (make sure you click on modify properties)

  • When Import a file with wrong name system will behave Hang.

    Hi,
    On Portal at Mitigation->utilty->import .
    then type any file name to the text.
    System will hang how to resolve ythis issue.
    thank

    Hi,
    This is a known issue with fileupload UI element, when you specify a invalid path or file name.
    Following link will give you details of the issue, you will see the explanation and work around from microsoft.
    http://help.sap.com/saphelp_nw04s/helpdata/en/b3/be7941601b1d09e10000000a155106/frameset.htm
    Regards
    Ayyapparaj

  • Hi add fields in ztable user name system time and date urgent

    i have to add three new fields in my z table
    a)user name
    b)system time
    c)date
    suppose if anyone update my ztable then the above three fields should catch the values as which user change the ztable at what time and on which date
    plzzzzzz help
    urgent
    saurabh

    To create the fields use the following field types.
    CPUTD - for Date
    CPUTM - for Time
    USNAM - User name.
    when updating the table pass the system variable.
    sy-datum - for date
    sy-uzeit - for time
    sy-uname - for user name

  • How do I change the PHP code so that the name of the senders name appears in the email subject line?

    I need help please, altering the PHP code generated when exporting my Muse websites (to a host other than Business Catalyst). The emails generated from the forms need to have the sender's name in the subject line of the emails.

    This would require editing the published php page outside of Muse and would require the knowledge of PHP. You may get the required info at http://www.php.net or some PHP specific forums.
    Thanks,
    Vikas

  • Inbox won't display senders names from Contacts list?

    Is there a way to get the iPhone email Inbox to display the sender's name from my Contacts list when the user is on my Contact's list? As it is now, when I go to my Inbox on the iPhone, it shows a list of email addresses instead of the name's of the users, even though they are on my Contacts list. Once I click on a message and view it, then it shows the Contact List user name, but it does not show that data on the Inbox page.
    Is this a bug or is there a setting to change this behavior or something else?
    Thank you.

    Mikeintokyo and C.Moser,
    I'm with ya. I wonder if someone somewhere is working on an mail app that can both display names and allow us to use emoticons. Having used emoticons for years with my students, the sudden lack of them has some of them thinking I'm mad at them. Also, when I try to use the heartmark or other symbols available thru the numbers keypad, the email I send is apparently unreadable.

  • Non display of senders name on text messages

    Hi
    On my Nokia 1100 when I recieve a text from a contact in my address book, the phone DOES NOT display their name, only their number.
    How can I set the phone so that it displays names?
    Thanks!!
    Richard

    Is this the same with incoming / outgoing calls? If so, chances are the number's in your memory twice - possibly in the Sim memory and Phone Memory - delete one, then see if their names show up. (Make a note of it first just incase it's not and you lose it)
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

  • Quick Profile Name system not working as expected

    When I open the EMET and I change the value of "Quick Profile Name" from Recommended Security settings to maximum security settings and then restart the application it always changes to "Custom Security Settings" and it also changes
    the Data Execution Prevention (DEP) from "Always On" (like it is on maximum security settings mode) to "Application Opt in". How do I get it to stay on the Maximum security setting? Even if I change only the DEP to "Always On"
    it always changes back, how come?

    Hi,
    If your environment has multiple database, move the user to different database and check the status.
    Also try
    run the mailbox repair request for that mailbox, and check.
    new-mailboxrepairrequest -mailbox ""mailbox"

Maybe you are looking for

  • Can't install InDesign after purchasing (after having a trial free period)

    I had a free trial period using InDesign and then decided to buy the Creative Suite on a monthly basis. I successfully installed Illustrator using Adobe Creative Cloud. But I can't find or seem to be able to install InDesign which is very frustrating

  • NM output is slight different than in MA

    Hi guys, one questions from MA newbe. i use default parser in NM and default viewpoint in MA, but there are some missing information in MA: No router preference and output is slight different than in NM, like A is H now. i used before NM, but now try

  • Filter / Sort by Bit Depth? (16 bit vs 8 bit)

    I am looking for a way to use the Filter panel to sort/filter results by bit depth (16 bit vs 8 bit images) - is there a way to do this Bridge CS4? I have looked in every part of the sorting mechnisms and can't find a way. Am I missing something?

  • Tree Query in htmldb 1.6

    Hi, I am a new HTMLDB User, trying to use Tree feature. I am trying to create a tree with the following query, but the tree results in the first record only. Awaiting your valuable response. SQL> desc opptable Name Type Nullable Default Comments OPP_

  • SRM System access

    Hi all, I am an MM consultant in US and trying to learn SRM on my own. How do i get SRM system access to practice? Please let me know. Thanks, Neetha.