Sending BUPA_MAIN into the RFC queue

Hello,
I would like to send BDoc <b>BUPA_MAIN</b> into the RFC queue
(must be default for Business Partner), for selected BP from my report.
I know how to send bupa_main direct to the site, but it is not the same.
Can anyone help me with this ?
Regards, Robert

Hi Vikash,
thanks for the answer.
Unfortunately this tx has sent BP <b>direct to the site</b> not to the queue.
Flow context (smw01) shows MO4 (mBDoc Direct Send) for Bupa_Main.
And for test I stopped all queues in tx: SMQ2.
And maybe there is a problem with the RFC configuration ?
In transaction after BP is selected new window "SELECT SITE" shows,
and what I can see is one line where :
RFC Destination = NONE
#          = empty
Log.System     = empty
Site Type ID      =  CDB
Site ID           = some guid
What do you think ?
Best Regards,
Robert

Similar Messages

  • Program sending queries to a RFC Queue

    Hi experts!
    I have a program that is sending queries to outbound RFC queue ( T/ smq1). How can i know the name of this program and how can i stop the queries?
    Thanks to all.

    Hi,
    Double Click on the Queue Name and check all the columns in Next screen.
    Second last column is for Program Name.
    Regards,
    Ranjit Thakur.
    <b>Please Mark The Helpful Answer.</b>

  • Application fault for Sync Send holds up the ccBPM queues

    Hello Experts,
    I have the following scenario which I have realized using a ccBPM in SAP PI 7.31.
    I receive a nomination idoc from ECC from which I create a nomination request to be sent in Sync manner to a web service. The response received from the web service is sent through another idoc, back to ECC. In case of any failure during this, an ALEAUD idoc is sent back to ECC to convey the failure. This web service returns an application fault in case any data in the request is improper and there is no fault message in the WSDL for the web service.
    I have used a ccBPM to receive the nomination idoc from ECC, transform it to web service request and send it using a Sync Send step. In case an application fault occurs, the SOAP receiver channel shows the error as application fault and my Sync Send step does not receive the expected response. However, a SOAP message with envelope is received from the web service which leads to the BPM queue land in error 'Permanent error in BPE inbound processing'.
    However, in case of the application fault I want to make the Sync Send step trigger an exception so that the ALEAUD idoc is sent back to ECC system.
    Any thoughts on how i can achieve this?
    Thanks in adv.
    Diptee

    Hello Experts,
    I have the following scenario which I have realized using a ccBPM in SAP PI 7.31.
    I receive a nomination idoc from ECC from which I create a nomination request to be sent in Sync manner to a web service. The response received from the web service is sent through another idoc, back to ECC. In case of any failure during this, an ALEAUD idoc is sent back to ECC to convey the failure. This web service returns an application fault in case any data in the request is improper and there is no fault message in the WSDL for the web service.
    I have used a ccBPM to receive the nomination idoc from ECC, transform it to web service request and send it using a Sync Send step. In case an application fault occurs, the SOAP receiver channel shows the error as application fault and my Sync Send step does not receive the expected response. However, a SOAP message with envelope is received from the web service which leads to the BPM queue land in error 'Permanent error in BPE inbound processing'.
    However, in case of the application fault I want to make the Sync Send step trigger an exception so that the ALEAUD idoc is sent back to ECC system.
    Any thoughts on how i can achieve this?
    Thanks in adv.
    Diptee

  • Can I configure JDBC Sender to process the RFC response message?

    Dear All,
    We're working on an integration scenario of synchronous messaging from database to RFC. Is there any way to update or insert the record(s) onto the source database according to the BAPI response?
    Any inputs are welcome. Many thanks for your time and support.
    Regards,
    Matthew

    Hi Chun,
    As far as I know you will not be able update the database back based on RFC response in a synchronous way though you have option of selecting BE in sender JDBC adapter.
    This is sentence from SAP training material...
    "In the case of a JDBC sender, the database table is queried via a SELECT statement. The message is by definition asynchronous hence the QoS should be set as EO or EOIO. "   
    The only option i can think of is JDBC Sender(async)->BPM->RFC(synch)->response mapping to JDBC receiver structure->JDBC receiver to update the table.
    Also check these threads...
    JDBC source in a Synchronous BAPI call.
    Re: JDBC Sender Synchronously?
    Anand
    Message was edited by: Anand Torgal

  • How can i conect my iphone to a computrt and send music into the phone

    i cant send music from itunes to the iphone

    Hello sebastianquainoo,
    Thank you for the details of the issue you are experiencing with syncing music in iTunes to your iPhone.
    I recommend resyncing your iPhone.  You can resync content to the iPhone by unchecking "Sync Music" and then clicking "Apply" and then checking "Sync Music" and then clicking "Apply" again.
    You can find the syncing steps in the following articles:
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12113
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Creating XML string to be pushed into a JMS queue

    Hello All
    I am trying to pass the following XML string into a sender obj, however, I am not sure how it is supposed to be done, with the right escape sequencing.
    message.setText("<rawData><Name="Mike"></Name><Value="200"></rawData>");
    Please guide me.
    Thanks,
    AJ

    Login User should have the Admin privilege, Otherwise it is not possible to post data manually into the JMS Queue.
    Log into weblogic Console > click on JMS Module > <select the JMSModule where the Queue resides : e.g SOAJMSModule> >Select the Queue > Monitoring > Check the Box > click on "Show Message" > New > Post the data in "Body" section.
    Or, you can create another BS in OSB, pointing to that JMS Queue(using Input.xsd) . then execute the BS using your Input.xml

  • How can i change the user that open the rfc connection (sm58) from R/3?

    Hi all,
    i'd like to know how can i customize the user 'connecting' R/3 and BW, i mean: when i launch a data extraction a fixed user creates the rfc connection to BW (and i can see it from tcode sm58 in r/3), i need to use a different username so that it will come be more easy for me to reorganize the rfc queue in case of errors (we are doing some testing), it's possible to do something like this or everyone has to share the same user r/3 side?
    I hope i've been clear...
    thanks for the help
    S.

    Hi...
    Its recommended that only one user executes the RFC because you must manage the authorizations for remote execution only with few users....in case on error you can send the user as a parameter of the RFC  and you can buid the error message with this parameter and identify the user of execution...
    I hope this helps you
    Regards

  • OAI Event is not reading the workflow queue

    I'm creating the workflow event using iStudio (created automatically by iStudio) with the following information:
    Item Type: OAI Process Bundle: EDWARD
    Internal Name: I_EDWARD_PAATRANSACTION_OAI_V1
    Display Name: Receive Request EDWARD.PAATransaction:IN
    Description: OAI Event
    Event Action: Receive
    Event Filter: oai.edward.paatransaction.oai_v1.receive_request.oai_v1
    Cost: 0.0
    I also create the event subscription for oracle.apps.wf.event.agent.create, oracle.apps.wf.event.event.create, and oracle.apps.wf.event.subscription.create and put the following information:
    System: WFLOWDEV.MAXIMUSBC.CA
    Source Type: External
    Event Filter: oracle.apps.wf.event.subscription.create
    Source Agent: <blank>
    Phase: 1
    Status: Enabled
    Rule Data: Key
    Rule Function: WF_EVENT_FUNCTIONS_PKG.RECEIVE
    Workflow Item Type: EDWARD
    Workflow Process Name: PAATRANSACTION
    Out Agent: <blank>
    To Agent: [email protected]
    Priority: Normal
    Parameters: <blank>
    I can see that the interconnect OAI Hub is putting a message into the WF_IN queue but the event does not dequeue the message and run the process.
    So, I don't know if I'm missing anything here or there is something wrong with my configuration.
    Can anyone help me please?
    Thanks,
    Edward

    Edward,
    I am basing this reply on the OAI build I have on my laptop, which is an Oracle 9iAS Integration build, however I do not think that it has changed since.
    Before you do this, it is always a good idea to add the "OAIHeader" objects to the Common View.
    1. Under "Common Views", expand the "Business Objects" and find your Business Object (e.g. MY_BO)
    2. Under the "Events", expand the "Events" to find your event (e.g. MY_EVENT)
    3. Highlight you event (MY_EVENT), Right-click on your mouse, and choose "Edit". This will bring up the "Edit Event" window.
    4. Choose "Add". This will create a new line.
    The 'Name' will be blank.
    The 'Type' will be "String".
    The 'Owner' will be blank.
    The 'Array' will be blank, and
    The 'Default' will be 'NULL'.
    5. On the 'Type' value ("String"), click on the value "String". This will bring up a pop-up list.
    6. From this list, select "Data Type..."
    7. Now click once anywhere in the "Edit Event" window. This will bring up a "Common Data Types" window.
    8. Scroll down, find and highlight the the name "OAIHeader". Press 'OK'
    9. Now back in the 'Edit Event' window, you will notice that the type is "OAIHeader".
    10. Now give the "Name" (currently still blank) a value. Give it the name "OAIHeader" too.
    11. Press 'OK'
    12. You will now see that the Event now has "OAIHeader" information. Some of these values will be of interest and of use later.
    The actual values for "EventName, EventVersion" etc. will be added to the data of the message at Runtime.
    *** TIP: I always do the above exercise first for every Business Object event I create. Once I've included the 'OAIHeader', I then add all of the actual other message attributes to the message afterwards. ***
    Create Content Based Routing Rules
    In this example, I am going to route a message from a sending DB Adapter (DBAPP1) to the Workflow Adapter (WORKFLOW). Then once the message has been passed to the Workflow, it will be passed to the receiving DB Adapter (DBAPP2).
    1. In iStudio, under the "Design" tab, expand the "Enabling Infrastructure".
    2. Under "Content Based Routing", find your Business Object.
    e.g. MY_BO
    3. Expand the Business Object, and then expand the "Events" to find your event.
    e.g. MY_EVENT
    4. On the Event (MY_EVENT), highlight it, then right mouse click. Choose Edit.
    5. A window will pop-up called "Content Based Routing: MY_EVENT"
    6. Hit the "New" button.
    7. Expand the message structure (MY_EVENT), and find the 'OAIHeader' node.
    8. Expand the "OAIHeader" node, and select (highlight) the "SendingApplication" attribute.
    9. Press 'Next'. This will move you onto the next screen.
    10. From the drop-down list, choose the "==" Operator. Press 'Next'.
    11. Enter a Value in the box. Since my sending application is "DBAPP1", type in "DBAPP1". Press Next.
    12. Since I have completed the "source" CBR rules, check the "Condition Complete" radio button, and Press 'Next'.
    13. Now in the next screen, select "WORKFLOW". Now press 'Finish'.
    Perform the same as above, this time routing the message from the "WORKFLOW" adapter to your receiving adapter (e.g. 'DBAPP2'). If the Workflow message does not have the 'OAIHeader' information in it's structure, once again refer to the above and add it in.
    Once you have completed all of your CBR configuration, use "File > Push Metadata" to send this new message structure and CBR rules to your adapters (DBAPP1, WORKFLOW and DBAPP2).
    HTH,
    Yan

  • How to delete RFC queue in SM58?

    [internal code: E60063TWAN]
    Is there a solution (ABAP) to quickly delete records from the RFC queue?
    From time to time we experience problems that cause the RFC queue to freeze (on an SQL deadlock). Strange then is that all jobs that do run are all located on one of the available servers (central instance). Our 2 other application servers remain idle in this case.
    We have no solution at this time for this problem. Only thing we can do is to stop the dataload releated to the locked RFC entries. Next we must delete all the RFC entries manually (hundreds). This must be done 1 by 1.

    Take the help of abaper / basis and dig to the bottom of the issue and see what is causing this.
    I guess if it is happening every day we have fix this at the source.
    Hope this helps.
    Thanks,
    Ravi.

  • Will check RFCs enter RFC queue?

    Hi Experts,
    I have a doubt , if we put a check RFC in an event , and that event gets triggered does the check function module enter the RFC queue( i.e. SM58 )?

    Hi,
    I found the answer. It is not transactional RFC hence does not enter the queue i.e.  in  SM58

  • Problems with the spillover queue

    RDBMS: 9.2.0.5
    OS: Sun Solaris
    I created a simple streams with one source table and one destination table
    on two different database.
    I noticed there are some messages into the spillover queues on both sites:
    AQ$_strmuser_queue_table_p
    How can I delete that messages?
    The aq_tm_processes = 4 in both sites.
    Best,
    Ale

    I too have record in my overflow/queue_table_p.
    In the Target database I have
    ENQ_TIME COUNT(*)
    07-MAR-2023 280359
    08-MAR-2023 2
    In the Source database I have
    ENQ_TIME COUNT(*)
    08-MAR-2023 29
    Should I be concerned about these? I finally have my replication running and up-to-date and don't want to jeopardize the environment.
    Thanks,
    Neal Martin

  • Need to know how to check the outbound queue in SAP for data flow into CRM

    Hi Specialist's,
    I have changed an entry in Customer Master Data in Sap r/3 and this change has come fine to CRM system.I checked the inbound BDOC in CRM ( Trn:SMW01) and it has come fine into CRM system.I am also able to see the affected field in CRM with new value.
    I need to know how to check this from SAP side i.e. I have checked the outbound IDOC list (WE02) but could not find the record.
    Is there any other way in SAP that i can check?
    Also please let me know if there is any other way except IDOC in SAP to send data from R/3 to CRM?
    Usefull answers will definitely be rewarded with points .
    Thanks,
    Abhinav.

    Hi Abhinav,
    There are no IDOCs generated in R/3 for replication. R/3 system calls BAPI and Function modules remotely on CRM system which are part of the Adaptors provided for middleware.
    Try to deregister the outbound queues in R/3 (Transaction SMQS) and see if you get an entry in the Outbound Queue (Transaction SMQ1). I have not tried this.
    If you don't get any entry in the outbound queue then definitely there would be some FM at R/3 end which would be calling CRM system remotely.
    <b>Reward points if it helps.</b>
    Regards,
    Amit Mishra

  • Can't drag files into the queue window on some computers

    For some reason, on my new desktop and my laptop. I cannot drag files into the Queue window in Media encoder. I  have tried dragging avi's, wav, and mp4. As the files I am dragging hover over the queue window, my mouse turns into the "circle with a line through it" pointer and I cannot add the files that way. I can click the plus sign and then browse to its location to add. I just want to have my drag n drop feature working again... Any ideas why i can on some computers and not others?
    I did try running media encoder as administrator. All my computers are running windows 8.1.

    do you have source patching turned on for audio?

  • Trying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.

    rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
    Does anyone know how to fix this?

    What EXACT version of Photoshop CS4 are you running?  You should be on Photoshop CS4 v 11.0.2.
    Also run Apple's software update to see whether it offers you the latest Epson update:
    Printer Driver v9.33
    Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
    MOST IMPORTANTLY:  have Photoshop re-create its own Preferences:
    To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
    Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
    Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
    Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
    NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
    How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
    Mac OS
    Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If  you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

  • I am getting this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles

    I am trying to send a message with an attachment, I get this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles help us stop spammers.). Please check the message and try again.
    == Today

    Me too (with Thunderbird). EXCEPT it reads
    Requested action not taken; This account is currently blocked from sending messages. If you don't think you've violated the Windows Live Terms of Use, please contact customer support...
    Occasionally the mail "sends", but it is unpredictable. Tech Support at Qwest (for q.com under Windows Live) does not find a problem at their end.
    More suspiciously, the same account accessed from my Mac does not seem to exhibit this problem. Have reloaded T'bird. Recurred again.

Maybe you are looking for