Sending job error message to admin by email

Hi everyone...
Anyone knows how to send job error message to admin by email? For example, if crawler failed, an email is sent to admin with the error message. I'm thinking of building windows service which run at the background and knows when a job fail and send the error message through email to admin.
Is there a better way?
Cheers,
Jefi Santoso

hi,
>>>Can this be achieved through BPM?
yes you can put your transformation step
and send step in a block and specify an exception
branch and catch all exceptions that will
occur during transformations and the send step
then you can send info from the exception branch to
any other system
you won't be able to catch the error's name
but you will be able to notify any thinrd party
about the error
more on error catching:
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
Regards,
michal

Similar Messages

  • When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified.  There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

    When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified.  There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

    Debi....
    Try "resetting" your Apple ID password >  Apple - My Apple

  • When I send a text message through my work email, keep in mind I do not get my work email on my phone, the response comes back to my phone instead of my work email. Where do I need to go to change this to keep it from happening?

    I do not have my iphone synced with my work email but when I send a text message via my work email any response I get comes to my phone. Why? How do I change that because I do not want my phone connected with my work email?
    Thank you

    I am not sure what you mean.
    Do you mean the From field?
    You can change it by tapping it, it will give you options based on the other email accounts set up.
    You can set a default account here:
    Sttings > Mail, Contacts, Calendars > scroll down to the Mail section & you will see Default Account. You can change that to your gmail account.

  • I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?

    I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?

    See my answer to your previous duplicate question. What happened when you tried my answers?
    LN

  • Correct and re-send the error messages in PI

    Hi everyone,
    Today when iam monitoring my PI i found error like some objects missing in the que, I toublshooted it by using inbount xml payload and found the error and cunsulted the user he asked me to correct and re-send the error messages. as iam really new to PI monitoring i really dont know how to correct and re-send the error messages in PI, can any one please help me with it.
    Thanks in advance

    When you send the messages from RWB-->Component Monitoring ->Integration Engine>test message, runtime parameters like Sender System, Receiver system, Adapter specific message attributes won't carry any values. If you are using any of these paramters in the mapping step,, the mapping will fail.
    I think in your case, RFC look up would have been configured based on Sender Business system/Service. but when you send message from RWB, the value for this field is empty. So that is why it is failing  as the message cannot find the business system and communication channel.
    If you use the sender file name, server name or any other parameters in the message mapping, then message will fail in the message mapping step. That is the major set back in RWB-->Test message.
    Reasons:
    1)We post messages directly into pipeline step message mapping.
    2)The previous pipeline steps are ignored when post messages from RWB such as Receiver determination, routing etc
    3)Receiver determination step is responsible to send Sender/Receiver values into the mapping step.
    Hope i have clarified your questions

  • I'm trying to email a photo from my iPhoto album, but I'm getting an error message that says "The email server didn't recognize your username/password combination." Any ideas?  I can't find any help in Apple on-line support.

    I'm trying to email a photo from one of my iPhoto albums, however I'm getting an error message that says "The email server didn’t recognize your username/password combination." Any ideas?  I can't find any help in Apple on-line support.

    Never mind.  I was able to find the solution via an earlier post from West.  Thank you!

  • Send custom error message using IDoc conversion rule?

    Hello,
    I am using an Idoc conversion rule in BD79 to load cost centers.  In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field.  This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits. 
    Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
    Thank you,
    Rhonda

    Hi Rhonda,
    Any luck on the below.. i have a similar issue...
    Sorry to hijack your thread...

  • HT201398 FaceTime & Messages now won't open on my iPad. Now no toggle switch in settings. Log in with my Apple ID sends activation error message 'try again'. Both Apps work on my iPhone & Mac.Any help?

    FaceTime & Messages now won't open on my iPad. Now no toggle switch in settings. Log in with my Apple ID sends activation error message 'try again'. Both Apps work on my iPhone & Mac.Any help?

    Adjusting the date or time didn't do anything for me either. I'm guessing my two options are to either do the full restore from scratch and not apply any backup ... Or possibly wait for an iOS update that might resolve this issue.
    I'm not that much of an avid twitter user that I need it implemented natively in all my devices - so for now I'll probably value all my game save data, internal settings in apps e.t.c. over that functionality (or over the amount of work it would be to get me back to where I am now after a full wipe). I'll see what happens after the next iOS delta update. I'll reevaluate the full wipe after that if the issue hasn't been resolved

  • Everytime I try to open an attatchment within an email it won't open, asks me to send an error message.

    Every time I try to open an attachment within an email it won't let me open it, it gives me the window with the choice of sending and error messg or do not send an error messg.
    Also, when I click on the Firefox icon to get online it takes like a minute or so for the internet to come up. Both of these isssues have been going on for about a month.
    Please advise me of what I should do to correct this, thanks so much. Edie Wolford

    Without any details it's difficult to help; all I can do is point you to this possibility: https://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html

  • After upgrading to Mountain Lion, I am not receiving some of my emails.  Sender gets error message:  Status 5.5.0.

    I am using Outlook for Mac on my MacBook Pro.  All was working well until I upgraded to OS X Mountain Lion (10.8.2).  Since the upgrade, some (not all) of my incoming email messages are bounced back to the sender with the message: ....Status: 5.5.0....Diagnostic-Code: smtp; 250 OK.  What can I do to resume reception of all of my email?

    I am using Outlook for Mac on my MacBook Pro.  All was working well until I upgraded to OS X Mountain Lion (10.8.2).  Since the upgrade, some (not all) of my incoming email messages are bounced back to the sender with the message: ....Status: 5.5.0....Diagnostic-Code: smtp; 250 OK.  What can I do to resume reception of all of my email?

  • Batch Job Error Messages

    Hi Gurus,
    I have a program with rounddown quantities in deliveries notes. This program is run in background with all other programs. When we checked the batch job error log, we found out that when it gets to this Rounddown program, there are some SAP generated errors messages (examples are listed below).
    This issue is there is no way to know exactly which deliveries the error is generated from and if the program actually rounddown the quantities of all the deliveries passed to it and so on, because this error messages are not specific enough (like we can see below).
    This program passed this new rounddown quantity number from the internal table using a BAPI.
    Is there a way to change this SAP generated error messages to be specific enough like stating which actual delivery number is been affected or even stop at the error and send an email to the user to change the delivery or something in that manner, OR is there a way we can replace this SAP generated error messages with our own messages and send email out to the user.
    Error Messages:-
    01/16/2008 01:40:40 Step 005 started (program ZSDSO_DELIVERY_QTY_ROUNDDOWN, variant , user ID AUTOSYSUSER
    01/16/2008 01:51:35 Item 000020 belongs to delivery group 001
    01/16/2008 01:52:13 Item 000020 belongs to delivery group 001
    01/16/2008 01:52:15 Item 000030 belongs to delivery group 001
    01/16/2008 01:52:19 Item 000020 belongs to delivery group 001
    01/16/2008 01:52:29 Dynamic credit check has been exceeded                              23,984.52 USD
    01/16/2008 01:52:30 Item 000020 (change quantity manually to             400 PC because of complex struct
    01/16/2008 01:52:30 Item 000030 (change quantity manually to             400 PC because of complex struct
    01/16/2008 01:52:30 Quantity correlation for dependent items has been carried out
    01/16/2008 01:52:30 Item 000020 belongs to delivery group 008
    01/16/2008 01:52:30 Item 000030 belongs to delivery group 008
    01/16/2008 01:52:31 Dynamic credit check has been exceeded                              23,984.52 USD
    01/16/2008 01:52:32 Delivery quantity must be entered for the item
    01/16/2008 01:52:34 Dynamic credit check has been exceeded                              23,984.52 USD
    01/16/2008 01:53:05 Item 000020 belongs to delivery group 001
    01/16/2008 01:54:40 Dynamic credit check has been exceeded                              15,501.88 USD
    01/16/2008 01:55:53 Item 000020 belongs to delivery group 001
    Thanks.
    Points will be awarded.

    This is the Subrouting Form code.
    FORM call_bapi_delivery_change TABLES p_i_lips LIKE i_lips.
      DATA: w_header_data TYPE bapiobdlvhdrchg,
            w_header_control TYPE bapiobdlvhdrctrlchg,
            w_delivery TYPE bapiobdlvhdrchg-deliv_numb.
      DATA: i_item_data TYPE STANDARD TABLE OF bapiobdlvitemchg,
            w_item_data TYPE bapiobdlvitemchg,
            i_item_control TYPE STANDARD TABLE OF bapiobdlvitemctrlchg,
            w_item_control TYPE bapiobdlvitemctrlchg,
            i_return TYPE STANDARD TABLE OF bapiret2,
            w_return TYPE bapiret2.
      LOOP AT p_i_lips INTO w_lips.
        w_item_data-deliv_numb = w_lips-vbeln.
        w_item_data-deliv_item = w_lips-posnr.
        w_item_data-material = w_lips-matnr.
        w_item_data-batch = w_lips-charg.
        w_item_data-dlv_qty = w_lips-lfimg.
        w_item_data-dlv_qty_imunit = w_lips-lfimg.
        w_item_data-fact_unit_nom = 1.
        w_item_data-fact_unit_denom = 1.
        APPEND w_item_data TO i_item_data.
        CLEAR w_item_control.
        w_item_control-deliv_numb = w_lips-vbeln.
        w_item_control-deliv_item = w_lips-posnr.
        IF w_lips-delete NE 'X'.
          w_item_control-chg_delqty = 'X'.
        ELSEIF w_lips-delete EQ 'X'.
          w_item_control-del_item = 'X'.
        ENDIF.
        APPEND w_item_control TO i_item_control.
      ENDLOOP.
      w_header_data-deliv_numb = w_lips-vbeln.
      w_header_control-deliv_numb = w_lips-vbeln.
      w_delivery = w_lips-vbeln.
      CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
        EXPORTING
          header_data               = w_header_data
          header_control            = w_header_control
          delivery                  = w_delivery
      TECHN_CONTROL             =*
        TABLES
      HEADER_PARTNER            =*
      HEADER_PARTNER_ADDR       =*
      HEADER_DEADLINES          =*
          item_data                 = i_item_data
          item_control              = i_item_control
      ITEM_SERIAL_NO            =*
      SUPPLIER_CONS_DATA        =*
      EXTENSION1                =*
      EXTENSION2                =*
          return                    = i_return
      TOKENREFERENCE            =*
      IF sy-subrc EQ 0.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            wait = 'X'.
        w_zbdcopendn-otce706 = 'X'.
        MODIFY i_zbdcopendn FROM w_zbdcopendn TRANSPORTING otce706
        WHERE delivery EQ w_deliveries-vbeln.
      ELSE.
        CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
        DELETE i_zbdcopendn WHERE delivery EQ w_deliveries-vbeln.
       DELETE i_deliveries WHERE vbeln EQ w_lips-vbeln.*
        w_bad_delv-vbeln = w_deliveries-vbeln.
        APPEND w_bad_delv TO i_bad_delv.
      ENDIF.
    ENDFORM.                    " call_bapi_delivery_change
    Thanks again.

  • Database mail not sending no error messages

    SQL server 2008 R2
    Database mail was up and running until sometime last week.  It seemed to quit in the middle of a long list of emails.  We had network issues at this same time that might have contributed to the issue.
    Everything checks out ok today but I cannot send a test email.  I do not see any error messages or 'db mail starting up' messages in the log.
    I do see the Email in the sysmail_unsentitems view.  
    I do not receive any error messages.
    I tried setting up a secondary account and that did not make a differnce.
    I tried stopping the mail service with EXEC msdb.dbo.sysmail_start_sp  and the query never completes.  I canceled after > 5 minutes 
    I deleted many unsent and one retrying message from the queue.  I see those actions in the log. 
    Is there any thing else I can try?
    KD

    Have you worked through the troubleshooting steps in the following BOL Topic to validate that the external executable is activating, and the queue status is correctly returning RECEIVES_OCCURRING:
    http://msdn.microsoft.com/en-us/library/ms187540.aspx
    Also have you tried increasing your retry configuration parameters to handle the larger mail queue that you are sending through?
    Jonathan Kehayias | Senior Consultant,
    SQLSkills.com
    SQL Server MVP | Microsoft Certified Master: SQL Server 2008
    Feel free to contact me through
    My Blog or
    Twitter. Become a
    SQLskills Insider!
    Please click the Mark as Answer button if a post solves your problem!

  • Error message with link to email

    Hi,
    I have a button on a site with a link to sending an email,
    I'm using the following;
    on (release) {
    getURL("mailto:[email protected]");
    I upload the file and test it online, and get the following
    error message when clicking on that button:
    RUNDLL
    Error loading C:\PROGRA~1\Yahoo!\Common\ymmapi.dll
    The specified module could not be found.
    Is this a problem on my computer? or something is wrong with
    what I'm doing?
    Thank you,
    D

    is on your computer!
    the problem is the Y! software...
    anyway, try PHP and send the mail easier... ;)

  • To send the error messages of an BAPI as an attachment in mail

    Hi all,
    I am running the BAPI_EXCHRATE_CREATEMULTIPLE to update the transaction OB08..I am able to do that.What i want now is that if there are error messages in the BAPIRET2 table then i collect these messages in a table and send these records as an attchment in the mail..
    I am using the FM   'SO_NEW_DOCUMENT_ATT_SEND_API1' to send the mail..
    Plz suggest how i should proceed..
    A sample code will be useful..
    <b><REMOVED BY MODERATOR></b>
    Thanks..
    Arun
    Message was edited by:
            Alvaro Tejada Galindo

    You should use the OO approach to sending email out of SAP.  There are several bcs_example* programs in the system.
    REPORT bcs_example_1.
    * This example shows how to send
    *   - a simple text provided in an internal table of text lines
    *   - to some internet email address.
    * All activities done via facade CL_BCS!
    DATA: send_request       TYPE REF TO cl_bcs.
    DATA: text               TYPE bcsy_text.
    DATA: document           TYPE REF TO cl_document_bcs.
    DATA: sender             TYPE REF TO cl_sapuser_bcs.
    DATA: recipient          TYPE REF TO if_recipient_bcs.
    DATA: bcs_exception      TYPE REF TO cx_bcs.
    DATA: sent_to_all        TYPE os_boolean.
    START-OF-SELECTION.
      PERFORM main.
    *       FORM main                                                     *
    FORM main.
      TRY.
    *     -------- create persistent send request ------------------------
          send_request = cl_bcs=>create_persistent( ).
    *     -------- create and set document -------------------------------
    *     create document from internal table with text
          APPEND 'Hello world!' TO text.
          document = cl_document_bcs=>create_document(
                          i_type    = 'RAW'
                          i_text    = text
                          i_length  = '12'
                          i_subject = 'test created by BCS_EXAMPLE_1' ).
    *     add document to send request
          CALL METHOD send_request->set_document( document ).
    *     --------- set sender -------------------------------------------
    *     note: this is necessary only if you want to set the sender
    *           different from actual user (SY-UNAME). Otherwise sender is
    *           set automatically with actual user.
          sender = cl_sapuser_bcs=>create( sy-uname ).
          CALL METHOD send_request->set_sender
            EXPORTING
              i_sender = sender.
    *     --------- add recipient (e-mail address) -----------------------
    *     create recipient - please replace e-mail address !!!
          recipient = cl_cam_address_bcs=>create_internet_address(
                                            '[email protected]' ).
    *     add recipient with its respective attributes to send request
          CALL METHOD send_request->add_recipient
            EXPORTING
              i_recipient = recipient
              i_express   = 'X'.
    *     ---------- send document ---------------------------------------
          CALL METHOD send_request->send(
            EXPORTING
              i_with_error_screen = 'X'
            RECEIVING
              result              = sent_to_all ).
          IF sent_to_all = 'X'.
            WRITE text-003.
          ENDIF.
          COMMIT WORK.
    * *                     exception handling
    * * replace this very rudimentary exception handling
    * * with your own one !!!
        CATCH cx_bcs INTO bcs_exception.
          WRITE: text-001.
          WRITE: text-002, bcs_exception->error_type.
          EXIT.
      ENDTRY.
    ENDFORM.                    "main

  • Blank Error message while trying to email in iPhoto

    I am trying to email a photo through iphoto, I get all the way to the send button, after I click send, an error window opens with no message so I have no idea why the action is not successfully completing. This happens everytime I try to email a photo. Does anyone know what could be wrong?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - reboot.
    4 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

Maybe you are looking for

  • Interrupted Setup Assistant

    In the middle of answering the questions on Setup Assistant on my new iMac, the power cord disconnected. The idiot setting up the iMac (me) did not realize that the power cord was not securely in place. When I fixed my mistake and rebooted I was take

  • Manually migrate iPhoto 8 Library to iPhoto 9.5

    Hi, I have a new MBP. Instead of using the Migration Wizard, and I want to manually move documents from my old MBP to the new one. I want a clean system, as there is a lot of cruft on the old machine from many prior migrations from machine to machine

  • One of a kind problem with the zen micro(which i love)......... PLEASE HELP me bring it back to l

    [color="#ff6600" size="4" face="Verdana">I have a creative zen micro and when i try to turn it on?i get?the blue glow but it only goes to the screen that says creative with the copyright info?then it'sfreezes?there and i have to take the battery out

  • Image Problems using bridge

    Hi there. Im having a wierd problem when placing images into PS from Bridge (vCS5). The image breaks up into numerous parts as shown by the image below. The only thing I can think of is that when shooting the image I sometimes set the camera to multi

  • Snow Leopard and Macbook Pro late 2008

    I'm expecting SL on friday and want to get ahead of the update game and trying to understand SL before install. Very little info is given on SL on the official website as far as what to expect after install. My main concern is that the non-official w