Sending mail from one Sap system to another

Hi all,
plz explain me how can i send mail from one SAP system to other SAP system.
Thanks in advance
Venkat

Hai Venkat
Go through the following Code
DATA: OBJPACK   LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD   LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST   LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA L_NUM(3).
Creation of the document to be sent
File Name
DOC_CHNG-OBJ_NAME = 'SENDFILE'.
Mail Subject
DOC_CHNG-OBJ_DESCR = 'Delivered Mail'.
Mail Contents
OBJTXT = 'Object text'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
LOOP AT ITAB_DATA.
    CONCATENATE ITAB_DATA-PRODUCTOR
                ITAB_DATA-VBELN
                ITAB_DATA-POSNR
                ITAB_DATA-MATNR INTO OBJBIN.
    APPEND OBJBIN.
ENDLOOP.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'ORDERS'.
APPEND OBJHEAD.
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'TXT'.
OBJPACK-OBJ_NAME   = 'WEBSITE'.
OBJPACK-OBJ_DESCR = 'ORDERS.TXT'.
OBJPACK-DOC_SIZE   = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
target recipent
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
copy recipents
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
RECLIST-COPY     = 'X'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = DOC_CHNG
       TABLES
            PACKING_LIST               = OBJPACK
            OBJECT_HEADER              = OBJHEAD
            CONTENTS_BIN               = OBJBIN
            CONTENTS_TXT               = OBJTXT
            RECEIVERS                  = RECLIST
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            OPERATION_NO_AUTHORIZATION = 4
            OTHERS                     = 99.
Thanks & regards
Sreenivasulu P

Similar Messages

Need of XI to send an XML from one SAP system to another SAP system

Dear colleagues,
I work in the SRM solution.
In SRM there is a Purchaser and Supplier scenario called Supplier Self Services.
The Purchaser creates a Purchase order and sends it to the supplier in form of an XML file.
The purchaser system and supplier system are the same SAP system but different clients.
Example: Purchaser client is 300 and Supplier client is 330 and both of them are on the same system.
I have a very basic question.
Currently we have the XI system which acts as an interface to send the Purchaser PO XML to the Supplier as XML.
a)My question is in case the XML structure is identical across both the clients, then what is the need of XI system?
b) Is it not possible to send XML from one client to another without an XI system? there si no need of any message mapping required since I am expecting the same XML structure in both clients.
Please clarify the need of XI system in the following scenario. Is it not possible without XI?
Many thanks.
Best regards,
Srivatsa

Hi Srivatsa,
YOu can send the XML message from one sap system to another sap system even without an XI system in between.
But the use of SAP XI (Or any other middleware) is recommended because, it gives you the following advantages.
1) Better monitoring and alerting mechanism. XI provides you robust set of tools that let you monitor the status of the messages that are exchanged.
2) Direct communication between systems is referred to as Point to Point communication, which has its own disadvantages as against Hub and SPoke model (Message exchange using XI).
3) Message delivery is guaranteed if you have XI in between.
If the target system is down, the sender sap system will not try multiple times to post the message.
But if you use XI, it can be configured to send the message multiple times, till it succeeds.
Regards,
Ravi Kanth Talagana

Sending mail from one sap box to other sap box

how to send mail from one sap box to other sap box?

Hi Pavan,
To send mail Internally check this sample code.
*& Report ZMATURITYREPORT *
*& Title - Maturity report *
*& Module - FI *
REPORT ZMATURITYREPORT.
tables: bseg.
SELECTION SCREEN--------------------------------------------------- *
parameters: p_email type somlreci1-receiver default
'<email_removed_by_moderator>.
Data: p_email(25) type c value <hardcoding_removed_by_moderator>.
END OF SELECTION SCREEN ------------------------------------------- *
--DATA DECLARATION--
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_message1 type standard table of solisti1 initial size 0
with header line.
data: it_message2(10) type N.
data: it_message3 type standard table of solisti1 initial size 0
with header line.
data: it_message4 type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: text(150).
data: t_packing_list like sopcklsti1 occurs 0 with header line,
 t_contents like solisti1 occurs 0 with header line,
 t_receivers like somlreci1 occurs 0 with header line,
 t_attachment like solisti1 occurs 0 with header line,
 t_object_header like solisti1 occurs 0 with header line,
 w_cnt type i,
 w_sent_all(1) type c,
 w_doc_data like sodocchgi1,
 gd_error type sy-subrc,
 gd_reciever type sy-subrc.
start-of-selection.
data: lv_date type sy-datum.
data: lv_date1 type sy-datum.
data: lv_formatdate(10) type c.
data: lv_formatdate1(10) type c.
data: var1(4) type c,
var2(2) type c,
var3(2) type c.
data: begin of int_bseg occurs 0,
 BELNR LIKE BSEG-BELNR,
 ZUONR LIKE BSEG-ZUONR,
 GJAHR LIKE BSEG-GJAHR,
 DMBTR LIKE BSEG-DMBTR,
 HKONT LIKE BSEG-HKONT,
end of int_bseg.
data: begin of int_SKAT occurs 0,
 TXT50 LIKE SKAT-TXT50,
 SAKNR LIKE SKAT-SAKNR,
 KTOPL LIKE SKAT-KTOPL,
end of int_SKAT.
data: begin of int_bkpf occurs 0,
 BELNR LIKE BKPF-BELNR,
 BUKRS LIKE BKPF-BUKRS,
 GJAHR LIKE BKPF-GJAHR,
 BUDAT LIKE BKPF-BUDAT,
end of int_BKPF.
data: 2days_out type sy-datum.
2days_out = sy-datum + 2.
data: var4(4) type c,
var5(2) type c,
var6(2) type c.
-- END OF DATA DECLARATION--
--- CONCATENATING AND ARRANGING DATE -
lv_date = 2days_out.
var1 = lv_date+(4).
var2 = lv_date+4(2).
var3 = lv_date+6(2).
concatenate var3 var2 var1 into lv_formatdate separated by '.'.
--- END OF CONCATENATING AND ARRANGING DATE -
--SELECTION FOR BSEG--
select zuonr belnr bukrs GJAHR DMBTR HKONT from bseg into
corresponding fields of table int_bseg
where bukrs = 'company name' and
 ZUONR = lv_formatdate.
*--END OF SSELECTION FOR BSEG--
--SELECTION FOR BKPF--
select BUDAT BUKRS BELNR GJAHR from BKPF into
corresponding fields of table int_BKPF
where bukrs = 'company name'.
append int_BKPF.
--END OF SELECTION FOR BKPF--
--SELECTION FOR SKAT--
select SAKNR TXT50 from SKAT into
corresponding fields of table int_SKAT
where KTOPL = 'company name'.
*and SAKNR = INT_BSEG-HKONT.
APPEND INT_SKAT.
*--END OF SSELECTION FOR SKAT--
----POPULATING EMAIL SUBJECT -
perform populate_email_message_body.
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Maturity after 2 days'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*endif.
end-of-selection.
----END OF POPULATING EMAIL SUBJECT -
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 object_header = t_object_header
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 others = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
loop at t_receivers.
 ld_receiver = t_receivers-retrn_code.
endloop.
endform. "send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
 submit rsconn01 with mode = 'INT'
 with output = 'X'
 and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
refresh it_message.
refresh it_message1.
refresh it_message3.
 refresh it_message4.
LOOP FOR BSEG -
loop at int_BSEG.
read table int_bKPF WITH KEY BELNR = INT_BSEG-BELNR
 GJAHR = INT_BSEG-GJAHR.
read table int_SKAT WITH KEY SAKNR = INT_BSEG-HKONT.
*-CHANGING DATE FORMAT FOR BKPF--
lv_date1 = int_bkpf-budat.
var4 = lv_date1+(4).
var5 = lv_date1+4(2).
var6 = lv_date1+6(2).
concatenate var6 var5 var4 into lv_formatdate1 separated by '.'.
*-END OF CHANGING DATE FORMAT FOR BKPF--
it_message = int_bseg-belnr.
it_message1 = lv_formatdate1.
it_message2 = int_bseg-dmbtr.
it_message3 = int_bseg-hkont.
IT_MESSAGE4 = INT_SKAT-TXT50.
SHIFT IT_MESSAGE2 LEFT DELETING LEADING '0'.
POPULATING EMAIL BODY WITH DATA -
concatenate 'Maturity After 2Days' 'for' 'G/L account-' it_message3
'--' IT_MESSAGE4 ',' 'Amount-' it_message2
 into it_message separated by space.
append it_message.
append it_message1.
append it_message3.
clear it_message.
clear it_message1.
clear it_message2.
clear it_message3.
endloop.
END OF LOOP FOR BSEG -
endform. " POPULATE_EMAIL_MESSAGE_BODY
To send an mail with external attachment check this one
first create a Include report with the following coding
*& Include ZPA1_INCLFOR_MAIL *
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
Then include that report in the following report and copy the same code and paste it there
*& Report ZPA_TEMP147 *
REPORT ZPA_TEMP147 .
INCLUDE zpa1_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
Check this sample report
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
Receivers
receiver_list-recextnam = '[email protected]'. "-->
EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
Mail subject
w_object_hd_change-objdes = 'Message subject'.
Mail body
APPEND 'Message content' TO message_content.
Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
Settings for sending mail
Configuring SAP 4.6x Internet mail Gateway
SAP can be configured to send and receive emails from different sources.This section explains how to integrate SAPOffice with an external emailsystem. Your Internet email must be configured and running prior to this.Email from SAP is forwarded to the users external email system..
You can configure inbound and outbound forwarding. Outbound flow forwardsa SAP message (eg: update termination) via UNIX sendmail to the intended recepient. Inbound accepts a message from sendmail and places it in the users SAPOffice inbox. Many companies prefer to configure outbound only.
Configuring outbound forwarding
SAP configuration
1. Create your RFC destination for outbound email using transaction SM59
RFC Destination : SAP_INTERNET_GATEWAY
Connection Type : T
Description : SAP internet mail gateway
Click on 'Explicit Host' if you wanton demand gateway dameon invocation.
Program : /sapmnt/SID/exe/mlunxsnd
Target Host : Enter hostname that runs your central instance.
Click 'Test Connection' and you should seea successfull message.
2. Shared Office Settings transaction SO16-> Send -> Settings or
directly via transaction SCOT- SAPconnect Administation
Nodes - Create
Node : IMAIL
Description : SAP internet mail gateway
RFC Destination : SAP_INTERNET_GATEWAY
Tick : Internet
Address Area : *
Tick : All formats
Dev. type : Choose an approciate Printer Device
Set further addresstype : N
Maximum waiting timefor repeat send attempt procedure : Blank or decide for yourself
Tick : Node is ready for use
Setting
- DefaultDomain : <your company domain>.com
- Conversionrule : require if your communication device only support one format.
e.g. if you email system only support the format RAW (ASCII text format)
Format To Format Ranking Function module
ALI RAW 1 SX_OBJECT_CONVERT_ALI_RAW (convert APAP List)
Referto note 171698 - SAPconnect: Formats, conversion, device type
UNIX configuration
1 .. cd /sapmnt/SID/exe
2 ..csh
..mlsomadm mailgw.ini
System Name [C11] :
Client [000] :
Username : MAILADM
Password : MAILADM
Language : E
Load Balancing :
Hostname : <hostname>
System number : <instance_number>
Gateway hostname: <central_instance_hostname>
Gateway Service : <instance number>
Use SAP Router :
Trace level :
Sendmail Command [/usr/lib/sendmail -i -f<SENDER_ADDRESS>]:
Codepage [ISO-8859-1] :
Trace Level (Outbound) [0] :
Update file sapmailsid.cfg? [Y]
Testing whether your configuration is successful
1. Logon to SAP
2. Execute transaction SO01
3. Write a message and send it to <your_internet_email_address>
4. If you don't see the mail in your internet mailbox, go back and review steps 1-12
Schedule the SAP Internet Mail Gateway Jobs to start every 5 minutes
1. Create
2. Position your cursor at INT
3. Click Schedule and supply the date and time
4. Click Schedule periodically and tick Minutes and type in 5
5. Click Create and you are done
6. Click Show Scheduling to check
Problems that you might encounter :-
If you have set up a node in SCOT and it tests out well but recieve the reply.
"Cannot process message in node, parameterscannot be converted".
Make sure the RFC connection is working, and that SapConnect has been installed on the Unix Server or the Microsoft Exchange Server. Originally, I had the same error, and found that nothing had been installed on Unixor Exchange, to support SapConnect.
In SCOT (View -> System Status), your mail remains at the Intransit column.
Check you sendmail.cf files (e.g.Sun Solaris /etc/mail/sendmail.cf). Try using the sendmail command to send a test file at the Unix level. You must be able to send mail at theUnix level before you can send mail at the SAP level.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/700b405bacdd5fe10000000a155106/content.htm
http://www.tamboly.com/SAPEmailConfiguration.html
Check my previous links
Mail Send
sending mails from abap program
Mail Sending to external email id's
settings needed for sending emails
<points_request_removed_by_moderator>
Cheers,
CHAITANYA.

Migrate PY and TM cluster data from One SAP System to another

Hi Experts,
Could you please suggest me some options to migrate PY and TM cluster data from One SAP System to another? My requirement is to move all the cluster data (Active and Inactive ees).
I see that PU12 is an option. Anybody used that to migrate between SAP systems. Please provide some details
Points guaranteed
I see that using PU12 you can export only PCL2 Clutsers. Are there any ways to move the other clusters like PCL4 ?

Hi,
As far as data transfer, If have all normal configuration settings in your targeted system you can use LSMW (Use T.code AS91 in LSMW for recording) to transfer your data in your both cases.
Hope it resolves your both the issues.
Regards,
Murali

DATA Migration Strategy of Inventory from one SAP system to another

Hi,
We are migrating data from one sap system to another due to business split . I would like to know what are the considerations, dos and donts for inventory/stock balance migration.
Appreciate your responses on the same.
Kind regards,
Tanuja

Hi
Here are some of the links for Data migration in SAP which may be really helpful for you..Please have a look at them.
http://www.packtpub.com/article/data-migration-sap-business-one-part1
http://www.sap-press.de/download/dateien/1468/sappress_migrating_your_sap_data.pdf
http://sceisqaweb.sc.gov/documents/Agencies-Approach-and-Plan-for-Data-Conversion.pdf
Thanks.

Redirect EDI PO's from one SAP system to another

Hi Guys,
I have a requirement wherein we have to redirect EDI PO's from one SAP system to another. What should my approach be? Since both the systems have the PO's setup, how can I differentiate the logic in such a way that latest system where we're migrating the code behaves in a same way as it is currently doing in two systems. I hope I didn't confuse you
Prineet

I might be not the only one unable to understand the question - what are you asking exactly? To my knowledge, it's not possible in SAP to simply route the IDocs from one system to another - you'd need to map your EDI middleware to the correct system. But migrating the code is something completely different. So what is the question?

Migration of Planned Orders from one SAP system to another one

Hi,
A quick help needed.
We are migrating SAP data from one SAP system to other due to business split. Regarding PP data, can Planned orders be migrated as it is from one SAP System to another? What is the impact if we do so?
Appreciate your response.
Kind Regards,
tanuji

hi ,
As suggested , you can propose to migrate only Firmed Planned orders from SAP to SAP system .
How to acheive it ?
You can use below BAPI to extract details of planned order from Table PLAF and upload in TARGET SYSTEM
BAPI_PLANNEDORDER_CREATE
Please note newly created Planned order in Target system would not have BOM EXPLOSION and Scheduling .
If need , Make a BDC recording as a add on step to explode Bom and Schedule by clicking those icons in Planned order .
Technical Team can do this .

Copy a program from one sap system to another

hi all,
i need to copy a program from one sap system to another..along with the text symbols, selection-texts and includes without any transport request release...how can i do that?
thanx in adv

Hi,
You need to Download the Program first in to Local desktop then upload the same to another server, we can not move the code directly from a server to another server without a Transport request.
but you can call the program from other server using RFC destination, create a RFC for that server and create a function module in the server which the program is there and use the SUBMIT statmet in that function module, then from the other server call this function module using RFC destination
Regards
Sudheer

Copy data from one SAP system to another based on conversion rules

Hi All,
Please provide your input on how can we copy data from one SAP system to another based on conversion rules.
Conversion rule :
vkrog in 110 vkorrg in 120
1234 4567
<<text removed>>
Thanks
Edited by: Matt on Feb 16, 2009 4:35 PM

Please read the Rules of Engagement here: Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Please note that offering points is against the rules.
matt

Client transport from one sap system to another one

When I want to make a client transport from one sap system to another (i.e. the source system is a system without a enhancement package and the destination system is with ehp5) can it be that there come critical conflicts in the modules (like FI, CO or HCM or other ones)?

Hi Damian,
It is not recommanded to import TRs from SAP system not at equal level.
Get both the systems at same level if possible.
But still if you have senario like this , pls ask to transport owner about changes included to undersatnd criticallity
Regards,

Transferring Development from One SAP system to another?

I was wondering if it was possible to transfer an entire Package or a Transport with its development contents from one SAP system to another?
It would be preferred if the method doesn't require connectivity, like for example to be able to export everything in a package to an XML-file that could be imported into an empty package on another system.
It would need to handle all development parts, such as Reports, Function Modules, Classes, Special Classes (such as Exception Classes), Shared Objects and Persistent Objects (Yes, I like objects ), Unit Tests, Data Dictionary definitions for tables, table types, structures, data elements and so forth.
It this in any way possible?

Hi
I believe u can only create a request containing all abap object of the package: u can do it by SE80.
After releasing the request u need to pick up the data file and the cofile and past these files to the target system.
So u can add and then import the your request in the queue of the development of the target system by trx STMS.
Probably u need to ask a little help to your basis in order to copy and past the files from and to SAP server (I don't know if you've the authorizations).
The name of datafile is like D<request number>.<system id>
and the path
/usr/sap/trans/<SYSTEM ID>/data
the cofile name is K<request number>.<system id>
and the path
/usr/sap/trans/<SYSTEM ID>/cofile
Max

How to transfer JPG/JPEG from one SAP system to another?

I am not sure this is something that is easily possible, if even possible, and can't find anything about it.
Does anyone know how to transfer a picture (JPG/JPEG) from one SAP system to another (both 7.00+)?
Scenario would be something similar to uploading a photo into one SAP system, then having it pass it to a central SAP system.
Any thoughts about how or if it is possible would be helpful.
Thanks,
Jake

Hi,
I can think about at least two ways. One way is using web services or RFC. You can create a RFC enabled FM which would return a string of bytes (type XSTRING) for some particular ID. It's pretty easy to expose RFC enabled FM as web service. Consuming web service from ABAP is easy as well. Another solution is using REST based interface. You would write a HTTP handler which would return a jpeg image for particular ID. For example URL would look like http://<hostname>/image/?id=ABC and client would just call GET request for this URL and response would contain jpeg image.
Cheers

How we can import an IDOC structure from one SAP system to another w/o ALE

Hi Gurus,
How we can import an IDOC structure from one SAP system to another? we're not able to use ALE tech, these two sap systems are isolated.
Any response will be awarded!
Thanks a lot.
Samson

hi,
1.One is by change pointer concept i.e by executing the RBDMIDOC.We can generate the idoc and automatically to the inbound System.
2.By executable program also like bd10 and bd11.
Regards,
SHIVA(reward if helpful).

How we can import an IDOC structure from one SAP system to another

Hi Gurus,
How we can import an IDOC structure from one SAP system to another? If we're using ALE, how can we do that? Please can someone give me the process and necessary t codes.
Any response will be awarded!
Thanks a lot.
Samson

hi!
Define the logical system names in both the systems.
Logical system names :SAP001
SAP002
SAP001 FOR 001 CLIENT
SAP002 FOR 002 CLIENT
These two logical system definitions should be present in both the systems.
Assign the logical systems to the client. (in both the systems)
Assign SAP001 to 001 CLIENT
Assign SAP002 to 002 CLIENT
you can See these in transaction SALE.
After this define the rfc DESTINATION IN sm59. (in both the systems)
In 001 client create the RFC destination name SAP002
In the tab log on security, give the user name and password and client of the 002 client and save it.
Similarly do the reverse in the 002 Client.
In 001 client create the port.(Transaction WE21)
Specify the RFC destination name as SAP002.
Now you can define the ports, (both the systems)
Create the partner profile for partner(ie gve logical system name of partner) , so give as SAP002.
partner profile in both the systems.
Now create the distribution model in BD64 and goto edit>model view>distribute.
The same model view will be visible n distributed to the partner system also..which in this case is sap002.
U may trigger the idoc from we19 and chk its status in we05.
Please let me know if you need further info on this.

SAP IS Retail: Transferring Generic article from one SAP system to another

Hi,
I want to transfer generic article from one SAP IS Retail system to another SAP IS Retail system using ARTMAS idoc using BD10 in sending system. But I could not get article in receiving system in BD11. ARTMAS is not available in BD11.
How can I process this ARTMAS idoc in receiving system?
Thanks and Regards
Richard

How about using RFC with BAPI to pass the info out?
It's easier this way.

Sending mail from one Sap system to another

Similar Messages

Maybe you are looking for