Sent vCards to bluetooth device. Last and first names reversed

I just finished exporting my Address Book to my LG 8500 and, for some reason, every single name is "Last First". Part of me thinks it's because the LG has no support for either field and refers instead to just a "name". Is there a way to force the vCard export to combine the first and last into a single name field? That, or when it exports the vCard, it exports as a "first last"? I have tried several settings in Address Book to no avail. it seems to insist on exporting last, first.

Similar Messages

Address Book flipped last and first names and won't flip back

Has anyone encountered where after syncing Address Book with Exchange, the first and last names have been flipped and cannot be flipped back? No matter what I do in my Preferences, I can't seem to stop having the address card show the last name first and the first name last. I've tried adjusting the "Sort By" and "Display Order" in multiple configurations and just can't seem to get it back the way it was with First Name then Last Name displayed and sorted by Last Name. Even when I look at the "Template" I see the First Name first and the Last Name second but neither the card nor the list window shows it that way.
Has anyone else seen this? Were you able to restore control to how you view this?
Thanks
JimN

no responses but I discovered that if I change the sort feature a few times, Address Book corrects itself. Wonderful feature.

Printing address labels via Address Book - last and first names mixed up

Trying to print mailing labels from Address Book. However in my list of 50 contacts, some labels are printed with the first name then last name, and others are printed with the last name then first name. It doesn't seem to matter if I switch the order of how it appears for each contact within address book, or set the Preferences in Address Book to have the first before the last name, some labels will still be printed with the last name first.
Any suggestions???

Something which worked for me was after adjusting the order of the first and last name (either using Preferences) or manually, I saved it, and then it seemed to print fine after that. So maybe saving it first before printing was the key.

No break for last and first names?

In a paragraph or character style, where can I tell inDesign never to break any word starting with a capital letter (either hardcoded or formatted with the All Caps button): first names, last names, cities, etc.
Otherwise I have to manually check, highlight the word and select No Break from the flyout menu hundreds of times. I can't think this is the only way to proceed?
Thanks

I cannot make it work then, because in the attached image you will see a capitalized word (italicized with a character style) that "Ouverture" does break, although my paragraph style of course is set on Do not hyphenate capitalized words.

Next,previous,last, and first record

dear all masters
plz help me my code dont work
i used button when button pressed and code below
First_Record;
execute_query;
last_record;
execute_query;
previous_record;
execute_query;
next_record;
execute_query;
but all wont work it wont goto the next, previous,last and first records.. master plz help me..
micababe

How do I navigate to the last_record after a query has fetched all my records. I jnow it existed the POST-FETCH trigger, but now how can I make this possible?
My problem is simple. I am trying to navigate to the last record of a block after the query has fetched all the records.
Thanks,
Lucian

Disable bluetooth "Device Connected" and "Device Disconnected" notification

Hi there.
Is there a way to stop the bluetooth "device connected" and "device disconnected" notification from appearing in the middle of the screen?
Logically this notification should be optional and disabled out of the box just like other hardware notifications (network, printer, hard disk etc..).
Cheers
Marty

Does it have a driver to use it as a serial port?
Say hello to my little friend.
RFC 2323 FHE-Compliant

6233 Search contact in last name AND first name

Hi,
the 6233 does not search Contacts in both first names AND last names. It only searches only in what come first.
Exemple : searching for "Paul" does not find "Smith Paul"
Do I need a firmware update to fix this ??
Thanks for your answer !

Hi Chen,
Based on my knowledge, there is no related method to enforce all users using More Columns as the default search option in Outlook Address Book. We can just change the search option for individual Outlook user by remembering the last search using as I mentioned
above.
Sorry for any inconvenience and thanks for your understanding.
Regards,
Winnie Liang
TechNet Community Support

Change the order of last name and first name

I use my iPhone in English, however I have a few Japanese contacts and I add their names with kanji (Japanese characters). In Japanese, the last name comes before the first name, and in English, obviously, the first name comes first. I have my settings with the last name first because it makes a little more sense in both languages, but I want to change the order depending on the languages without putting the last name in the first name and vice versa. Is this possible?

Not really, the name order is global so you cannot just switch it on and off. Best way is to just reverse the entry order as you have been doing.

Imported contacts have last name/first name reversed

When I had my old Samsung dumb phone, I listed all my contacts by last name. (There was a single name field in the old phone, so I listed everybody as "Smith, Bob.") But when I had my contacts list imported into my new iphone 5c, it read all the last names as first names and vice versa. (It put "Smith," in the first name field and "Bob" in the last name field.) I know I can choose to sort contacts by last name or first name. But when I choose "Last, First" it lists all my contacts by first name. So now when I enter a new contact directly into the iphone, it's backwards from everything else.
What am I supposed to do here? Am I just supposed to keep entering contacts backwards for as long as I have this phone? Or is there some sort of app or setting to fix this?

Hello X4r7s
Friend if possible also sort your comets.
Enter application Contacts
Slide your finger from the top down
Two options appear and Configuration Help
Enter settings
Sort contacts tab deployed by:
Here choose the method you want:
Name
LasName.
Company
In your case option 2
Regards...
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

JDBC Schema and Table Names Reversed

Hi,
We're currently evaluating CR4E but are unable to successfully run/preview any reports.
We have successfully created a JDBC connection using the generic JDBC driver. We are connecting to an Ingres database. The connection is successful and we can browse databases/schemas/tables with no problem. The problem is with the SQL that the reporting engine is generating.
A simple example:
SELECT "currency"."description" FROM   "currency"."john" "currency"
In this statement, "currency" is actually the table and "john" is the schema name.
The query should read:
SELECT "currency"."description" FROM   "john"."currency" "currency"
Help would be appreciated as we're completely stuck.
Many thanks,
Darran Smith

Hi Tej,
Thanks for clarifying the issue on the JRC.
Executing:
SELECT "price_type"."currency", "price_type"."description" FROM   "price_type"."john" "price_type"
against the DB results in "Table 'john' does not exist or is not owned by you" as expected.
Executing
SELECT "price_type"."currency", "price_type"."description" FROM   "john"."price_type" "price_type"
against the DB works just fine.
I amended my code to simply call:
CRJavaHelper.changeDataSource(reportClientDocument, userName, password, connectString, driverName, JNDIName);
and changed the CRJavaHelper.java file around line 145 that originally reads:
newTable.setQualifiedName (origTable.getAlias ());
I tried setting the qualified name to various different things:
"price_type"
"john.price_type"
"otherSchema.price_type"
None of these worked, but they did produce different things in the JDBC trace log. I've uploaded the JDBC log file to showing what happens with either "price_type" or "john.price_type":
[http://www.romofabrics.com/iijdbc.txt|http://www.romofabrics.com/iijdbc.txt]
As you can see, everything looks OK (including the schema and table name) until the very final select statement is created.
When you say that generic JDBC is supported, is that what I'm effectively using?
Cheers,
Darran

In osx 10.8.2, how do I maintain two Bluetooth devices (mouse and head-set) connected at the same time?

I want to use both a Bluetooth mouse and head-set at the same time, is that possible?

Thank PapaSmurf (?)
My problem was that in Sound settings was not indicated the Head-Set device, although existing, but BoomDevice, that greatly enhances the sound level. So what I had to do was first change from BoomDevice to the Head-Set, and then I changed down to Internal speaker and then again chose BoomDevice. That way, I could turn off the Head-Set without getting the error message, and yet maintain the internal speaker through the BoomDevice.
I had a feeling that I had to do something with the sound settings and your reply made me experiment and succeed! Thanks once again!

Last and First pages of the Interactive report

Hello,
I have successfully inserted this code
<div style="">
<table>
<tr>
<td style="">
<img align="absmiddle" alt="<<" title="<<" src="#IMAGE_PREFIX#srmvall.gif" onclick="gReport.navigate.paginate('pgR_min_row=1max_rows='+$v('apexir_NUM_ROWS')+'rows_fetched='+$v('apexir_NUM_ROWS'))" />
</td>
<td style="">
<img align="absmiddle" alt=">>" title=">>" src="#IMAGE_PREFIX#smvall.gif" onclick="gReport.navigate.paginate('pgR_min_row='+RetMinRow()+'max_rows='+$v('apexir_NUM_ROWS')+'rows_fetched='+$v('apexir_NUM_ROWS'))" />
</td>
</tr>
</table>
</div>
<script type="text/javascript">
function RetMinRow(){
var lN = $v('P1_MAX_ROWS')*1 / $v('apexir_NUM_ROWS')*1;
lN = Math.floor(lN*1);
lN = lN*1 * $v('apexir_NUM_ROWS')*1 + 1;
return lN;
</script>
BUT, I can not figure it out how to calculate the report max rows to set the value of P1_MAX_ROWS.
If anyone knows how to do that, please help me.
Thanks,
froggica
Edited by: froggica on Oct 6, 2010 10:55 PM
Edited by: froggica on Oct 6, 2010 10:56 PM

Hi,
Ok, good
I do have another version of javascript that catch IR pagination
function IRgetPagination(pVal){
       parameter pVal values:
       first = Return IR first row
       last = Return IR last row
       max = Return IR max rows
       if parametter pVal is something else return all values in array
var p=$.trim($('#apexir_DATA_PANEL').find('td.pagination').find('span.fielddata').text());
var a=new Array();var n=new Array();a=p.split(' ');
$.each(a,function(i,v){if(!isNaN(v)){n.push(v)}});
switch(pVal){case 'first':return n[0];case 'last':return n[1];case 'max':return n[2];default:return n}
}And with this you can do bit simple
$s('Px_MY_ITEM', IRgetPagination('max')); /* Set item Px_MY_ITEM value to IR max rows */Regards,
Jari

How to search users in Outlook Using Last Name and First Name

During recent times we change the naming convention in AD, FirstName , LastName
We can search users using More Columns but I would like to know alternate method to search users. The search result should sort results by last name as query
Regards Chen V [MCTS SharePoint 2010]

Hi Chen,
Based on my knowledge, there is no related method to enforce all users using More Columns as the default search option in Outlook Address Book. We can just change the search option for individual Outlook user by remembering the last search using as I mentioned
above.
Sorry for any inconvenience and thanks for your understanding.
Regards,
Winnie Liang
TechNet Community Support

Why does text field in InfoPath 2010 show user name with two commas between first name and last?

Here's the problem. I have a text field called Manager in an InfoPath 2010 form that is getting populated by a drop down field called
Business Unit.
The Business Unit drop-down field is pulling information from
column A in a custom list via a managed data connection. The custom List has two columns:
Title & Manager.
The Manager column in the custom list is a 'Person or Group' type column.
The Data Connection pulls both the Title, Manager
(and ID) data.
There is a rule on the Business Unit drop-down field to change the value of the
Manager text field with the Manager data on the custom list. The rule pulls the
Manager information and filters the value to match the
Business Unit on the Data Connection with the Business Unit drop-down
field value (Main).
The Business Unit drop-down field works great and pulls the value from the custom list, and the rule populates the Manager text field. The problem is that Manager text field shows the name as such:
[smith,, john]. Notice the two commas between the last and first name. There should only be
one comma!
Anyone have an idea why the text field is appearing with two commas?
Arnel

Hi all,
I have a workaround for this. I have an InfoPath 2010 form pulling data from a SP2010 list. The user chooses a System (Business Unit) from the dropdown list and that choice auto populates the associated user (Manager) for that system. I had to
use concatenation, substring before and substring after to display the correct data.
concat(substring-before(DisplayName, ",, "), ", ", substring-after(DisplayName, ",, "))
DisplayName is the original data for the field. I am able to cut & paste this field into the formula. Therefore, I added a few spaces to separate it from the actually formula for future use.
Select Insert Function
Select concat
Select the first link to double-click to insert field
and then select Insert Function
Select the Text category and choose substring-before
Select the third link to double-click to insert field
and then select Insert Function
Select the Text category and choose substring-after
Copy and paste your fieldname (in my case DisplayName) in the
double-click to insert field
parts of the substring-before and substring-after links.
Delete the middle double-click to insert field link
Add quotes, spaces and commas so that they match the following format:
concat(substring-before(DisplayName, ",, "), ", ", substring-after(DisplayName,
Translation:
concat(substring-before(Doe,, John, ",, "), ", ", substring-after(Doe,,
John, ",, "))
Bring together all of the text before ",," (i.e. Doe) with ", " (comma, space) and all text after ",," (i.e. John).
It should return
Doe, John.
I hope this makes sense. I have these instructions with screenshots if you need them, contact me.

Address book sync with google contacts - first names and last names flipped

Hi,
I am trying to sync my mac address book with my contacts in google/gmail and I have a strange issue. All my contacts written in english alphabet is syncing correctly, but when I have names in Korean characters, the last name and first name gets flipped. Without fail. All other fields seem to synch correctly, but the first name is mapped to the last name field, and vice versa. I have recently upgraded to OS X Lion on an iMac.
Any help would be greatly appreciated.
Jay

can anyone answer this?
at some point, I remember being able to do this. 10.5.x maybe? With 10.6 . . . .
I do recall, however, that I stopped doing it because the sync went haywire. I did it the other way around: I have all my contacts in Address Book, so I exported them and uploaded the vCards to Gmail, after deleting all Gmail contacts. That's not such a great option. Surely this is well-automated by now?

Sent vCards to bluetooth device. Last and first names reversed

Similar Messages

Maybe you are looking for