Seperate C, I, F using origin group

Hi experts,
My customer is trading company: purchase goods then sell to the market - no production at all.
Goods need to be valued at actual price - we apply material ledger
Inventory value have to separate into C, I, F (cost, insurance, freight), even if after transfer posting from plant to plant, or when being sold - be cost of good sold - they still have to separate into C, I, F
So, we tend to using a way like:
- create 3 origin group to represent C, I, F
- assign origin group to condition type
- assign condition type to cost component (3 cost component represent C, I, F)
To do that, i create costing variant, then assign costing variant to cost component structure. (I do not need to using costing variant, or material cost estimate here, just try to meet the requirement above)
Is my config. above sufficient or in excess?
Do I need to active actual cost component split?
If I do not assign cost element to cost component, Can I meet the requirement?
Any help would be highly appreciate!
Thanks in advance

Hi
One thing I would like to add here...
The config you did would provide you the breakup you need... But inventory value or COGS value in the GL accounts wont be hit accordingly
1. if you want inventory value broken up accordingly - You will have to develop a report using ABAP or BW... Multiply your inventory with the Std cost and give the desired break up....
You can draw this report either based on Std Cost or based on period end revised cost based on actual prices (CKMLCP run)
2. Now coming to COGS - The break up of C,I,F can come in COPA but not in GL accounts...
When you post billing, it would post std cost break up to COPA.. After CKMLCP at period end, you need to revaluate COGS in COPA using KE27 which would adjust the variances also in COPA...
To summarize, the GL accounts wont contain the break up of CIF...
You will have to develop report for (1) and (2) is possible through Standard SAP, but only in COPA and not in GL accounts
Let me know if this helps...
Regards
Ajay M

Similar Messages

  • Origin Groups in Material master

    What exaclty are origin grps and what are their roles from a controlling perspective.
    please le tme know

    Hi,
    Normally the cost element / s are mapped to cost components using Tcode OKTZ.
    This means that a cost element normally refers to only one cost component, if origin group is kept blank.
    However, we can use origin group as master data, and based on the origin group assigned in the material , we can assign it to different cost component, even for same cost element. Refer origin group column in Tcode OKTZ.
    Assign points if useful.
    Best Regards
    Shreekar

  • Origin Groups for Cost Centres?

    Hi
    I am using Origin Groups to post the credit of the overheads to a different Cost Centre depending on the raw material.
    We need to do a similar thing with our activity costs (labour).  The requirement is depending on the cost centre that posted the original labour activity cost credit a different cost centre with the overhead calculation.
    The documentation says Origin Groups are for materials.  Is there someting similar for cost centres to use when calculating overheads?
    Thanks for the help
    Regards
    Gill

    Hi
    I think you can achieve it... Give it a shot as below..
    IMG: Cost Center Accounting > Actual Postings > Period-End Closing > Overhead > Costing Sheet: Components > Define Calculation Bases Referring to Cost Center and Activity Type
    In this step, define your calculation basis as a combination of cost center and activity type, say Z01 as a combination of cost center 1000 and activity A1 and Z02 as a combination of cost center 2000 and activity A1
    Now set up your costing sheet with 2 calculation bases as Z01 in Row 10 and Z02 in Row 20
    In IMG Step "Define Quantity-Based Overhead Rates", define Y01 and Y02
    In IMG Step "Define Credits", define X01 and X02
    In row 30 of costing sheet, mention Y01 (dependant on row 10) and Credit X01 (Credit X01 posts to Cost Center 1000)
    In row 40 of costing sheet, mention Y02 (dependant on row 20) and Credit X02 (Credit X02 posts to Cost Center 2000)
    Regards
    Ajay M

  • Overhead calculation not happening after using orgin group.

    overhead calculation not happening after using orgin group.
    There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
    We want to apply/add Overhead to SFG/FG materials.
    We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
    But our problem is with material standard cost estimate process.
    We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
    In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
    But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
    We have checked all things as mentined below.
    Firstly that the correct costing sheet is assigned to the valuation
    variant.
    That the costing sheet is entered for the appropriate material type:
    Finished and semi finished or material components.
    All of the above can be checked and verified via transaction OKKN.
    In addition make sure that the base value maintained is present in the
    costing, for example the base may include an Origin group, is that
    origin group part of the materials being costed?
    Similarly if the base is found and values exist how is the overhead
    rate of the costing sheet set up, is it valid etc.
    And finally do a similar check for the credit.
    we doubt this as a programm error...
    So, request all experts to have ur feedback..

    Dear,
    Check your origin group & material unit of mesaurement is same.
    some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
    You can see unit of measure for material in Additional data - unit of measure.
    Check BOM component material unit also.
    Check same  unit of measure is maintain in KZS2
    I hope above will useful.
    GOPAN

  • Origin Group as Value field in COPA - Is that Possible

    Hello Gurus,
    The business requirement is to see all the Origin Groups as Value fields in COPA - Is that Possible? If Yes, Please suggest me the steps to follow.
    Thanks a lot for your time.
    Regards,
    PM

    Hi Praveen
    Origin group cant be a Value Field.. It can be a Characteristic...
    Try with these 2 options
    1. KEA5 - Click on Create/Change a new Char and Try to create it with reference from table MBEW... If this is allowed, you will be able to plug in the Field Origin group in yur COPA data structure... regenerate your op concern after this
    2. If (1) is not allowed, then create a WW char and write a derivation rule in KEDR with ref to Table LOOKUP and use table MBEW
    Regards
    Ajay M

  • Why can´t I use original HPinkcartridges from one HP printer to another HPprinter it says use origin

    why can´t I use original HPinkcartridges from one HP printer to another HP printer, it says use original cartridges -
    but they are original?

    If the printers are identical that should not be a problem. If the printers are not identical then it simply will not work. Each printer uses different cartridges unless it is from the same model group as the other.  
    In analogy that would be like asking why the spark plugs from a Porsche don't work in your PT Cruiser. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Using a group list in email and automatically sending out an email

    I have set up a group list in address book.  Each contact has 2-3 emails.  I am using Mail.  Currently when I have to send an email out to the group I have to select the group in address book, then choose "select all".  Select all only chooses 1 email per contact.  I then have to manually choose the 2nd and 3rd emails for each contact.  Is there any way I can use the group that I have created without having to go through all of that in order to send an email to my distirbution list?
    I blind cc'd my self on the original email I sent to the group and was using that one to "forward" but the problem I encountered was some people added, changed or fixed a correction in their email the forward did not reflect the change in the email.  I fixed the email in address book but it was not reflected in the original email--which I knew would happen.  Hopefully there is a better way to accomplish this!
    I also have to send out the same weekly reminder to this group--is there any way I cen set email to do this automatically?
    Thanks!

    Wow! This is what I've been looking for. I can't believe more people on this forum aren't complaining about not being able to use a Song List.
    Have you used this app?
    Is it stable?
    Can it be used with Logic LE, Garage Band etc.
    Thank you so much for this info.

  • How to update routing labour hours by material origin group?

    Hi,
    I have a requirement to update the routing labour hours by material origin groups to save time of updating each and every material. Is there a way to do this?
    For example if 3 materials belong to origin group A then if all 3 materials use labour hours of 5 hours, then the user has to enter only the origin group and 5 hours once to update all 3 material routings. Is this possible?

    Dear Raja,
    Can you let us what do you mean by origin Group ??
    if you mean updating the results in Material master
    then check T-code CA97
    Regards
    Madhu

  • Origin Groups assigned to profit centres

    How do you map an origin group to a profit centre and is there any other issues I should be aware of?

    Material is having profit center and for material you have origin group. I don't think you have any other issues with this.
    reward if useful
    sarma

  • Origin Group for PO

    Hello,
    can i assign a origin group for a PO without material number? I will use this origin group in my costing sheet for defining a separate base row for POs.
    Thanks for any help.
    BG

    Hi,
    thanks for your fast answer.
    Did you mean taking a dummy material for the po? Is there any possibilty to get the assignment without material number?
    BG

  • When do I use user group "wheel"?

    Hello,
    I have the following question: What exactly is the user group "wheel" for and when do I use it (instead of "admin", for example)? Background to the question is, I recently noticed that some applications needed to be updated regarding ownership and ACLs.
    I had installed them while working as a non-admin user by drag and drop, authenticating as an admin user (which is short named "admin", too) when asked to identify as one. The apps were installed alright, but the ownership was set to the non-admin user, while the group was "admin". This caused some problems with BOINC, for instance, which I tried to fix by updating ownership and ACL, accordingly.
    When checking other apps that were installed with Mac OS X I noticed that most belonged to "root" (aka "System") and group "wheel" instead of "admin". This lets me wonder about when to use which group.
    Does anyone know about the backgrounds of this?
    Thank you in advance
    Jim

    Regarding your original question:
    "I had installed them while working as a non-admin user by drag and drop, authenticating as an admin user (which is short named "admin", too) when asked to identify as one."
    Okay, a couple of things here.
    First of all, for the most part, whenever you copy files in the Finder, the copied files take on the ownership of the person doing the copying (there's one exception which we'll see in the next paragraph). Since you were in a non-admin account, the Finder realized that in order to modify the /Applications/ folder, you'd need to first authenticate with an administrator name and password to obtain permission. Once permission was granted, the copied files took on the ownership of the user doing the copying (the non-admin user).
    "The apps were installed alright, but the ownership was set to the non-admin user, while the group was "admin"."
    Let's say you have a folder "ExampleFolder" whose owner is "root" and group is "admin". When you copy an item into the ExampleFolder, the copied item will take on the group permission value from the parent folder. That's why the item you copied had a group of "admin" (since the /Applications/ folder's group is "admin").
    "When checking other apps that were installed with Mac OS X I noticed that most belonged to "root" (aka "System") and group "wheel" instead of "admin"."
    Hmm, as far as I can tell, that's not true. Almost all of the applications in the /Applications/ folder will be drwxrwxr-x, root-owned, and group of "admin". Note that there is a display bug in the Ownership & Permissions section of the Finder's Inspector-style Info window in Tiger. The values shown in the pop up menus for owner and group do not update dynamically as you change your selection. Instead, they continue to show the owner and group of the original item on which you first opened the Inspector panel. So, for example, if you selected the /System/ folder, which has an owner of root and group of wheel, and then opened the Inspector window, any subsequent items you selected (such as applications in the /Applications/ folder) would still appear to have a group of "wheel". (The regular style Finder Get Info windows are fine).
    Hope this helps.....
    Dual 2.7 GHz PowerPC G5 w/ 2.5 GB RAM   Mac OS X (10.4.3)  

  • ACS 5.3 Authorization problem with using Identity Groups in Access Policy Rule

    Hello guys, I am found a problem which I can't solve regarding authorization with using Identity Groups in Access Policy rule.
    ACS version: 5.3.0.40.6 (internal build B.839)
    I have very simple RADIUS Authorization rule which authorize user on behalf of right Identity Group.
    Requested Identity Group exist
    Testing user is created in Internal Users and has assigned requested Identity Group
    Radius Access Policy: 
    Authentication against Identity Store Sequence, where authorization server is external RSA SecurID device and additional attributes retrieval is configured from Internal Users.
    Authorization is very simple – One Rule with only one Condition which is: Identity Group - in - Requested_Testing_Rule. Then Default rule is set to Deny.
    When I will try login with my testing user then authentication against RSA SecurID is OK, but authorization will be denied by Default rule – It looks like my Rule with Identity Group is totally omitted.
    I am managing several other ACS servers (version 5.3 but with older patches) where similar rules are working without problem.
    What I am tested:
    Remove testing user and create his account again.
    Rename Identity Group
    Use another Identity Group
    Remove Access Policy rule and create it again
    Use Compound Condition: System:Identity Group
    Use Compound Condition: System:UserID instead of Identity Group in Rule (it is working without problem)
    Do you have any idea where problem can be?

    OK guys, it started working yesterday without any configuration change. Maybe it was some database inconsistence wich was solved by ACS itself.

  • Single step workflow with multiple approvers (without using a group)

    Hi,
    is it possible to have a single step workflow with multiple approvers without using a group? This is for a contract document.
    i want to add a number of users based on particular logic. The approvers are random and do not belong to any particular group.
    DO let me know if it is possible or if any of you have done that.
    thanks in advance.
    regards,
    rubio

    Hi Rubio,
    I believe the behavior would be, if individual users are added as approvers then the system would require each approver to approve the document. However, if you use the user group, you could set the role so that it would be either ALL or ANY.
    Regards,
    Vikram

  • Is there a way to see what font was used originally, after the type has been converted to outlines?

    Hi all, I would really like to know if there is any way to find out what font was used originally in an Illustrator document, after the type has been converted to outlines? The reason for this is I need to update some wording in a couple of old logos I had made and I have NO idea what font I had used...for the life of me I just cannot remember. Because this was so urgent for one of my projects I had to do a search online via "WhatTheFont" to see what font it could be (which I then didn't seem to have in my library!), and repurchase it. I am 99% sure I HAVE the font - or something VERY close - but under a different name.
    Normally I keep a much better record of fonts used but there have been times occasionally in the past when I have done something in a hurry and changed the type to outlines without keeping the original, or keeping detailed notes at least. The fact that I did NOT keep notes on a few projects I have done in the past has made me want to kick myself because now I need to revisit one of those again..grrr:)
    Can anyone offer any advice? I appreciate your help as always:)
    best,
    Christine

    Christine,
    You can also ask in the Typography forum,
    http://forums.adobe.com/community/design_development/typography?view=discussions&start=0
    The guy running whatfontis is a regular poster there.
    And apart from
    http://www.whatfontis.com/
    there are
    http://www.identifont.com/
    http://new.myfonts.com/WhatTheFont/
    and especially for script,
    http://www.bowfinprintworks.com/ScriptIDGuide.html

  • What are the key fields used to group double orders in t-code SDD1?

    What are the key fields used to group double orders in t-code SDD1?
    Cheers,
    VT

    Hi,
    You can group the duplicate sales documents with the help of the following fields,
    Sold-To-Party,Document type,date and sales area details.
    Regards,
    Gopal.

Maybe you are looking for

  • Reading Large XML Files

    Hi All, I am trying to read an XML file which is around 6.4 GB which has around 1000 million records in it. I need to travel through all the elements and take out the values which matches my criteria. For Example the XML Looks like : <ss> <s>   <m>00

  • Copy and paste keyframes in motion tab

    Is there a way to copy and paste a keyframe in motion or filters tab?

  • With HP6500A Windows Visa Cable hookup, how to connect printer to network

    With HP6500A all in one Windows Visa cable hookup, how to connect printer to network

  • Table of Contents Wrong Order

    Hi there, Can anyone help me out with this issue? I have a table of contents set up here, but the subtitles are showing above the Chapter titles instead of below. I given them the appropriate levels-Units(level1), Chapters(level2), Subtitles (level3)

  • Performance Tuning : Query session

    Dear Friends, I am working with Hyperion Interactive reporting and I am very new to this environment, I am having a query session with 11 tables all are simple joins. when ever I am processing the query it talks long time to fetch the data ofcourse i