Seperate Line item for taxes in MIGO and MIRO

All SAP Gurus,
We want to inventories the CST (central sales tax) amount.
For this we have used the condition type JIPS, check marked the accounting key 'JI7' and gave posting indicator as '2' Separate line item.
Now, CST amount is getting inventorised at the time of GR. (but no separate line item is created at the time of GR).
During MIRO, the inventoried CST amount is getting deinventorised (although separate line item being created here).
Can we have separate line item in MIRO, without getting value deinventorised? (as it happens for freight)
Regards,

Hi Kunal,
Thanks for the reply.
As you have rightly said, we need to tick 'NOT DEDUCTIBLE' in OBCN (we have already did that).
And key has been already assigned in Atx procedure for the appropriate condition type.
But the problem is that, we want separate line item for this tax amount in MIGO.
Is it possible to have separate line item for the tax amount in MIGO (as we can get separate line item for freight in MIGO).
Regards,

Similar Messages

Separate line item for taxes in accounting document of MIGO

All SAP Gurus,
As we can have separate line item for Freight amount (Freight amt credited) in accounting document for MIGO.
Similarly is it possible to have separate line item for tax amount which is inventoried.
Regards,

Hi Rajan,
Freight is from pricing procedure whereas tax is from taxing procedure.
Tax cannot be shown in separate g/l in MIGO.
Reason:
If u wanna show tax as separate item then we need to debit tax a/c in migo as well as it has to go to inventory which is not possible(double accounting enrty on debit side).
I too tried to do the same by specifying 2 for posting indicator and selecting non deductible for the nonsetoff account key used in the taxing proceudre in OBCN but it is behaving like setoff tax.
U can also try doing the same and then check.
Reg
Raja

Double line Item For Tax

Hi SAP Gurus,
I have a issue related to invoice verification.
We have following tax procedure
Basic Price + Excise + Frieght + VAT = Gross Price
But here frieght is taxable on which VAT is caluculated.
But while doing MIRO system is showing two line items for Tax condition (VAT)
1. One line item VAT amt calculated on (Basic price + Excise duty)
2. Second line item VAT amt calculated on (Frieght amt.)
I have maintained single line item in OBCN.
My client want to have single line item.
Pls tell me how to solve this.
Regards
Gitesh

Hi
DCGR means freight GR. System automatically creates this at the time of MIGO, if freight condition is mentioned in PO itself.
Hence in MIGO creation systems creates one material GR and with the same number one DCGR.
You can see it from purchase order history through PO.

FB60 - Two line items for tax amount (Posting Key - 50)

Hi,
I am facing some issue in FB60 invoice posting. For the same vendor(say V1) I am posting 2 different invoices for 100 USD - the company code, G/L, CostCenter & Tax Jursdiction code are different in both the cases. Once I do FB60 and got to document overview screen this is what I see...
Case1 - in the document overview screen I see a Posting key(PK) 31(invoice amount), PK50(tax amount) & PK40(total amount)...which is fine.
Case2 - in second case the document overview shows two line items for PK50(credit - tax amount) and tax amount is different.
Two questions...
1) Why there are two tax items (PK50 items) - is that dependent on tax rule or vendor or company code?
2)My client says the tax amount should be same in both cases - but I am wondering how can it be, when tax codes are different in both the cases? Where can I check how these tax values are getting calculated.
Any adivse/hints will be greatly appreciated/rewarded.
Thanks
Kiran

AKu
I got the same scenario also
this second document display because of material price change u can double click that document

Plan cost line items for cost centers report

Hello,
I am displaying the report: Plan cost line items for cost centers and when I display the details of a line item it appears a document number, where could I display this document?
I have tried to display it in FB03 transaction but it seems not to be this kind of document.
On the other hand in the field Business transaction it appears RKP6, what is the meaning of this field?
Thank you very much

Hi Beatriz Amezua ,
For displaying plan line items for cost center - KSBP and for display of individual plan document : KABP
RKP6 means "Planning Activity Dependent Costs"
Like in FI module, the business transaction have been codified and the list you can find in KANK transaction , mention your controlling area, menu -- Groups -- Display Groups
Srikanth Munnaluri

Commitment line items for cost centers - KSB2

Hi all,
-     PO#450118888
-     Client is working in transaction code KSB2 (Commitment line items for cost centers)
-     Client states that PO shows a different amount or that line item 2 does not show at all in KSB2.
Please guide me what is the solution for this and where I need to check
Thanks and Regards,
Kumar

Hi Beatriz Amezua ,
For displaying plan line items for cost center - KSBP and for display of individual plan document : KABP
RKP6 means "Planning Activity Dependent Costs"
Like in FI module, the business transaction have been codified and the list you can find in KANK transaction , mention your controlling area, menu -- Groups -- Display Groups
Srikanth Munnaluri

Service tax debit as a seperate line item in Invoice

Hi
i want service tax to be debited into separate G/L at MIRO,
Iam doing the general process selecting a frieght vendor at PO, and frieght charge. but service tax is cumilating into frieght vendor a/c at MIRO postings.
but my client is paying service tax directly to govt. for the frieght services ( usually for petty freight vendors who cannot pay service tax).
so i want to post the service tax into a seperate G/L
Please help me
Krishna

Set the account key assigned to the service tax condition as deductible. This can be done in OBCN. If you do not activate the "Non deductible" indicator and is you set the posting indicator to 2 (seperate line item) then the service tax credit will go to a seperate line item.

Print out of line item wise tax for each material code.

hello all,
Requirement is that my client want to print tax of all item in purchase order seperatelyi.e.line item wise tax for each material type.
is there any standard procedure available in sap?
Your valuable input will be apperciable.
Regards
sumit bisla

Take the help from ABAPer and give your requirment to print the tax at item level.

S_ALR_87012357 report - Advance Return for Tax on sales and purchase

Hi Friends,
I would like to know few things in regards the VAT report S_ALR_87012357 report - Advance Return for Tax on sales and purchase:
(1) What information brings the S_ALR_87012357 report?
(2) As of now this report displays tax against vendor line item and not expense line item. Is there any other report that shows all the positions lines affected to tax?
(3) Is it possible that the tax line stays only in the expense line account and not in the vendor line account or not any intercompany line account?
(4) Is it possible S_ALR_87012357 report shows information about the tax allocanted in expense accounts and not in vendor accounts?
Appreciate a faster response.
Thanks in advance.

Please try report S_ALR_87012359. This report gives you opportunity to choose account selection.
I am unsure how the SAP is setup in your organisation. S_ALR_87012357 should pick up expenses selection as well.
This report entirely depends on tax code selection.

Line item text field from MIGO are not copied into FI line item text field

Hi all on SCN, please, I need a help.
It was created as required by the user a field status group with the text field required.
This field status group was assigned to some accounts, in order to make my unit tests.
u2003
In development envirionment was made some tests directly in FI area, and it works properly.
u2003
But the user made a test using MIGO transaction, choosing in this transaction an account that he changed its field status variant to the one created in development environment, that make the text fiels required. So, to start, he donu2019t fill the text item of MIGO, and a message error appear stating that he needs to enter values in this field.
After fill in the text fiels, he can save his work.
u2003
But the FI document generated donu2019t receive the line item text typed in MIGO, but receives the values on Reference document and Document Header text entered in the header of MIGO, what is missing, donu2019t is automatically copied MIGO text line items to FI documents line Items, does there is some additional configuration missing?
Hope someone help me with this issues.
Thanks in advanced!

Hi,
Material document will get updated in reference field in FI by default. If for any reason, want to get this updated in text field, you need to define a subsititution in GGB1.
Best Regards,
Madhu

Creation of Line Item for TDS

Hi
I am facing an issue while posting the vendor invoice. When posting the vendor invoice, system is automatically creating a debit entry to TDS account for Ecess, whereas the other Line items for TDS are created correctly. We have maintained the posting keys, and the account assignment is also there for both debit and credit parts. The tax code and tax types are correctly assigned to the vendor master and the rates maintained are also correct. The system is giving this error for the particular tax code for INV and PAY for one particular section, say Sec 194H
Regards
Sanil Bhandari

Hi Sanil,
In CIN, surcharges like Education Cess are automatically shown separately from the basic taxes and are over and above the basic withholding tax, why because this is mandatory as per IT Act. For that to function, please check IMG>Tax deducted at Source>EWT>Calculation of Surcharges, to see whether you have maintained settings for separate line item.
S Jayaram

Value difference for GR/IR Clearing Account in case of MIGO and MIRO.

Hello Experts,
One of our client has asked me about clarification regarding GR/IR Clearing Account shows different values when MIGO and MIRO posting. Scenario is that,
SEZ
Calculation of import Duty
Input goods
Material Base Value
       2,171,385
Landing Cost
             21,714
For computing Customs landing charges need to be added
BED @
10%
           219,310
Loaded in material cost
CVD, @
12%
           289,489
Credit taken
Customs Education Cess
3%
             15,264
Loaded in material cost
ADDL Duty
4%
           108,686
Credit taken
Customs Duty
           632,749
CVD
12%
           219,310
All duty
4%
           108,686
Cenvat
           327,996
CST
       43,427.70
2214812.7
Hence Material cost in GR/IR should be Rs. 22,14,813
Diff (2219092-2214813= 4279)
Whereas it is taking Rs. 22,19,092
My concern is that GR/IR Clearing Account consider only Material cost and non deductible tax amount i.e. CST which is loaded on material cost but system consider some different values, please check the above calculation. When user post MIRO in that case system automatically konck off GR/IR Clearing Account and post difference amount i.e. RS. 4279 to Inventory Account which is wrong. I dont know how system behaves in such manner.
Please giude me on this issue as soon as possible.
Regards,
Vishal Jadhav

Discussion moved. Please use Internationalization and Unicode for CIN related queries.

Single line item for multiple line item payment.

Hi
I have booked the 3 vendor invoices (in FB60) for a single vendor. Now today i paid (with F-53) all the three invoices together. One payment document number was generated.
However when i saw the vendor line item, i saw that three debit line items was generated for the clearing the open invoices (i..e 3 credit line items). so when i say vendor line item report, there were total 6 cleared line items (3 for credit i.e invoice and 3 for debit i.e. payments)
But is it possible to get single debit line item for all the three invoices cleared. If yes, please let me know how i can get it.
If i will have one single line item for payment, vendor report would be simpler. Please help

Hi,
1. If you do payment through F-53, then each invoice have separate payment line item. This is not avoidable. If you do payment through F110, then you can group the line items for payment, so there only one payment line item for many number of invoices.
2. While clearing through F-44, system is generating automatic line items because, there are exchange rate fluctuations. You can't avoid these line items, as these automatic line items only match Debit and Credit amounts in order to post the document.
Rgds
Murali. N

Mass change of payment in customer line item for all open line item.

Hello,
We have updated the new payment as per the new agreement with customer in customer master. We want this new payment term should also be updated in all the open invoices which are not cleared. Is there are way we can do the mass change in Payment term as the open line item in the customer where line item are more than 50. Please let me know the transaction code for the mass change of payment term in Customer account balances.
Thanks and Regards,
Rajesh Kumar Mantri

Hi
you can find the way to change the payment terms
first check weather the payment term field is having change option in your document change rules in the line item for you customers.
Financial Accounting (New)Financial Accounting Global Settings (New)DocumentRules for Changing DocumentsDocument Change Rules, Line Item
if the payment term BSEG-ZTERM(payment term) is there for your customer and having deselcted check box for changing document you cannot change payment term for your company code.
This can done client level or company code level.
if the payterm can be changed you do changes to payment terms mass level.
Thanks
ANJI

Difference between MIGo and MIRO for GR IR clearing

Hi all,
I hav created one PO in foreign currency for 10 items. GR is happening for all 10 lines with rate say Rs 50. Now when i am doing MIRO with same rate i.e. Rs 50, 8 materials are getting posted correctly. But for 2 materials there is inventory posting for fixed amount (in local currency) irrespective of quantty.this case amount in foreign currency is same but dieefernce for GR/IR account is in local currency.
When line items analysed it was observed that fo these 2 materials exchange rate picked up is different than header exchange rate. the difference in exchange rate is posted to stock account.
In short system icking differen xchange rate for different line items for one invoice ( MIRO is happening against only one invoice)
Can any one please explai this phenomena and any solution for this?
thanks

When you do aut. clearing and the exchange rates account is set up it will clear the GR/IR account.
There is no reason to change exchange rates

Seperate Line item for taxes in MIGO and MIRO

Similar Messages

Maybe you are looking for