Seperating purchase order requisitions by demand origin

Hello All,
I am hoping someone has some familiarity with dual flows for receipts.
Our supply chain services direct assembly (production order demand) and customer services (plant transfer order).  Our purchase orders communicate the demand to the vendors without any indication of demand source.  Once materials are received, we create a plant transfer order to move from our plant to the CS plant.
I am wondering if it is possible to setup SAP to segregate the demand to drive separate purchase requisitions.  This would allow the product to be direct directly to customer services at receipt.  In the screen capture below there is the dependent demand from assembly and the ConRel demand from the customer services plant (D003).  These are rolled up in to purchase orders based on order policy.
Any help would be greatly appreciated.
Regards,
Jason

Hi Jason,
In the standard MRP this is not possible to do it. You could use lot size EX (lot for lot), but if there are more than demand requirement on the same day, then the MRP will create a single replenishment order.
You can try with BADI: MD_ADD_ELEMENT. Check this thread:
How to create separate planned order / purchase requesition for same date
Kind Regards,
Mariano

Similar Messages

  • BOM in standard PURCHASE order/requisition

    I would like to use BOM as a specification of a "group" of materials procured many times in the same or similar configuration.(eg. servers with specific configuration listing all parts).
    Is it possible, to use material BOM in standard purchase order (NEITHER SUBCONTRACTING NOR PRODUCTION ORDERS) as a kind of "recipe" for eg. server configuration.
    What I would like to achive is to reduce ammount of work in document entry. Instead of entering 30-50 position for each purchase requisition/order, I would like to use for this material BOM.
    Is it possible?
    If not, what other object can serve for preparing a list of materials to procure?
    How the buttons "BOM Explosion" and "Components" can be turned on on standard purchase order/requisition?
    Thanks in advance for help.
    Best regards,
    Wojciech

    Hi,
    To the best  of my knowledge - BOM's are used in the context of value addition say - a manufacturing or processing involved in converting the inputs to the final prodcut.
    While configurable items are used in a scenario where in a simple putting together / packaging in to a kit kind of activity is involved.In this scenario the final product is packaged to the requirements from picking the items of choice from the available prodcut list.
    As it seemed the requirement as indicated in the question are in line with this concept I had suggested this solution of usage of Configurable materials.
    I have not come accross a scenario of BOM and BOM explosion in Procurement excepet for Sub contracting.
    How ever , I appreciate if any one can share information on BOM & Explosion in  Purchase order.
    Hope this information helps.
    Thanks & regards
    Raghuramam

  • Purchase order requisitions -EKKN

    Does SAP provide an extractor for the Purchase order requisitions?

    Hi,
    I hope, there is no standard ES for EBAN table.So you may need to use Generic extractor.
    Re: Business Contect DataSource related to Purchase Order
    With rgds,
    Anil Kumar Sharma .P

  • Supplier number required in Purchase order/ requisition

    Hi Gurus,
    Requirement is to see supplier number in purchase order/ requisition.
    If we give supplier number automatically system should pickup the supplier name, if we give name system should pick up the supplier number like customer in sales order form.
    I have checked is there any hided field for supplier number not find any field, is there any possibility through Descriptive flex fields to achieve the requirement.
    Thanks
    AK

    Hi AK,
    Your requirement is possible only thru "forms personalisation".
    Also you need to link the supplier number with suppier name so that by selecting the supplier number supplier name defaults in the form.
    DFF does not help much here...it only captures the supplier number info.
    Thanks
    -Arif.

  • Availability  check in Enjoy Purchase Order & Requisition

    Hi Experts,
    The availability check is used in 4.7E also but what is difference in Ecc 6.0 or new functionality added
    Can any one plz let me know
    Regards
    Pratap

    Below is capture from sap release documentation :
    Availability Check in Enjoy Purchase Order and Requisition
    (Changed)
    Use
    As of SAP ECC 6.0, SAP_APPL 600, display and checking of availability are invokable separately in the
    Enjoy purchase order and requisition in line with the system behavior on the Sales side.
    You invoke the display and checking of availability in the Enjoy purchase order (transaction code
    ME21N) and the Enjoy purchase requisition (transaction code ME51N) as follows:
    - To display the availability overview, choose Environment -> Availability
    - To check availability, choose the Check Availability icon.
    13.6.16.3 System Behavior After Availability Check for an Item (Changed)
    Use
    If you carry out the availability check for an item of a stock transport order, hitherto the system adopted
    confirmations as per the desired date/time only.
    SAP AG 30
    ______________________________________________________S_A_P_-S_y_s_te_m_
    As of SAP ECC 6.0, SAP_APPL 600, you can define in Customizing how the system reacts if the desired
    quantity cannot be confirmed for the desired date/time.
    You have a choice of two settings:
    - Confirmation as per desired date/time
    This is the standard setting and corresponds to previous system behavior.
    - Delivery proposal
    - Full confirmation
    Effects on Customizing
    You make the settings in the Rule for Adoption of ATP Results in Purchasing field in Customizing for
    Purchasing under Purchase Order -> Set Up Stock Transport Order -> Assign Delivery Type and
    Checking Rule.

  • Purchase Order / Requisition Line Item Approval

    Hi
    Just wondering if Purchase Order / Purchase Requisition LINE ITEM approval is an option for workflow?
    Would the better solution be to use SRM line item approval on a shopping cart and create the Purchase Order from this?

    Hi
    Just wondering if Purchase Order / Purchase Requisition LINE ITEM approval is an option for workflow?
    If the process involved the need to use different approvers for different line items, would the better solution be to use SRM line item approval on a shopping cart and create the Purchase Order from this?

  • Problem with Purchase order (requisition)

    Hello friends,
    I have a problem during creating a PO also PO requisition. During my work, the system is reporting this error message:
    "Budget for all Years under year-based commitment update of value type Purchase order".
    I thing the problem is caused by some wrong year end closing activities or by the budget.
    I am hopeless. Thanks for your help,
    Charlie

    If you getting reqs against the internal order then it is related to controlling mans you have to check the settings for controlling which i have suggeted

  • Archiving purchase orders/requisitions

    Hi all,
    Pls. advice how to proceed with the archiving of purchase requisitions/purchase orders...!! what amopunt of involvement is there in this regards for a basis consultant and an MM consultant...what are the responsibilities shared by the 2 consultants?

    Hi Cynthia,
    Steps involved in Archiving PR's. Use txn "ME97"
    MM Consultants:
    1. Setup variant for "RM06BW30" program with relevant field values. (Decide 1step or 2step Process)
    2. If 2step process setup another variant for "RM06BW30" program for setting deletion indicator setting.
    3. Setup Job variant for Deletion program "RM06BD30".
    Basis Consultant:
    1. Plan and setup Database for storage of archived data.
    2. Setup up relevant links between the system.
    3. Based on the job sechedule given by MM Folks schedule and run the jobs in sequence.
    Hope this helps....
    Regards,
    Prasobh.K
    Reward points if this was helpful

  • Purchase Order Requisition

    Hi Gurus,
                 I want to clarify that only for Third party Item Category BANS the Purchase Requisition is triggered and can a purchase order be triggered for a Make to Order or any other item Category.
    Regards,
    Sarosh

    Dear Sarosh,
    yes, you can see the link to the production order from the sales order. If you go to the transaction VA02 or VA03, mark the item and go to the schedule line screen. Here you see under the schedule lines the following buttons:
        Sales    Shipping    Procurement
    In the case of assembly order you can see 4 buttons:
       Sales    Shipping    Procurement     Production Order
    In the case of third-party order you see other 4 buttons:
       Sales    Shipping    Procurement     Purchase Requisition
    So, it is impossible to have purchase requisition button and production order button simultaneously. Also in coding, these processes (both located in the include FV45EFMA) are completely separated, also in VBAP and VBEP the different fields are filled.
    To be sure that you have an assembly order, you can go to the schedule line screen, call debugger and check the field T459K-MNTGA. If the field contains '1' or '2' then you have static assembly, if the field contains '3' or '4' then you have a dynamic assembly, if the field is empty, then you have no assembly process (in the terminology "Make-To-Order" and "Assembly Order" are the same).
    So, on the schedule line screen you can see the linked productioon order.
    I hope, this info helps you further.
    Kind regards,
    Akmal Vakhidov
    Development Support SD, IMS, SAP, Walldorf/Germany

  • Reject a customer order and purchase order requisition

    Hi alltogether,
    I have to give a recommendation for the following case:
    user created a customer order with one item and item cat. TAB!
    user created a po with ME57/ME21N and ordered the parts
    user received the parts (with or w/o MIGO, doesn't matter)
    Now the customer rings and does not want the parts anymore.
    User wants to keep the po with the specific number 45xxxxxxxx, because he will receive a supplier invoice with relation to that po number. He also wants to keep the ordered parts in his own stock, means he doesn't want to return to supplier.
    How can we reject the customer order and change the po so that we can post the stock to unrestricted use?
    Thx a lot
    Wolfi.

    Hi,
    Still same Error-Message: "Delete purchase order 45xxx and item 000010 first"
    There is one workaround:
    1.) delete po item (garbage icon)
    2.) reject order item
    3.) change account assignment category in po item to BLANK (was set to M, because of the TAB item in cust. order)
    4.) clear Purch.req and req. item reference in po item line
    5.) save po
    6.) undo deletion of po item (unlock icon)
    Too complicate, isn't it?
    Any other idea?
    Regards
    Wolfi

  • RBATP fixes all Purchase orders Requisitions

    Hi All,
    We are using RBATP to create stock transfer requisitions between two distribution centers.
    The problem is that all the requisitions thar RBATP creates, are PP fixed (Input and Output Fixed are also marked). If we change the quantities in the sales order, RBATP does not modify existing requisition, but creates a new one, for the total quantitie in the sales order (so two stock transfer requests are created for the same sale order)
    Does anyone knows if this behavior is correct? (I do not think so)
    If so, is there a way to control fixing of requests?
    I thank you in advance for your kind cooperation.

    Hi,
    You can check following:
    1. In " Maintain Check instruction", under Production box please Flag ' Re-create Receipt elements'.
    2. Check for OSS notes 0001488343, this may help.
    Thanks,
    Dipankar

  • Error in creating purchase order/ requisition/ quotation..

    Hi techies,
    I amunable to create a po and getting an error message as below. I tried ob08, ob07, obbs commands but of no use... can anyone please guide me....thanks in advance
    Ambiguous EUR/INR exchange rate relations
    Message no. SG028
    Diagnosis
    The change to a different exchange rate type revealed different exchange rate relationships.
    System Response
    Fehlermeldung
    Procedure
    Maintain the exchange rate relationships for currency pair EUR / INR for all exchange rate types so that the conversion factors are the same.
    Execute Function
    You can then continue.

    HI,
    check in T-code OBBS currency type "M" the exchange relation EUR/INR and the column at the right side "Alt. ERT" (means alternative exchange rate).
    View also this currency type exchange relation EUR/INR there, I guess this is different from the one entered in "M" for the date the currency conversion happens in the PO.
    BR Christian

  • Delivery date from Requisition to Purchase Order

    Hi,
    let's suppose to have a material code and its inforecord.
    I create the Purchase Order Requisition and I put a delivery date. When I create the Purchase Order (ME21N) moving the POR into the basket, the delivery date I find in the PO is the one indicated in the POR. I would like that the delivery date I find in the PO will be calculated based on the "delivery time" indicated in the inforecord. For example, in the POR the delivery date is 15th May, today is 11st May, I'm creating the PO and I have 15 days of delivery time in the inforecord. I want that the delivery date in the PO will be 26 May (11+26). Now, if I create the PO, the delivery day will be 15th May...
    How can I set up the system to do this?
    Is there a set up that I have to do into the inforecord, maybe?
    Thanks,
    FT

    I you create the PR manually, then you manual entries have precedence over system defaults. Maybe you can control it with a user exit.
    if you create PRs is with the MRP run, then SAP takes the delivery date from the material master.
    if you maintain source list and indicate it as MRP relevant, then SAP can find the info record and can propose the delivery date based on the info record.

  • Automatic creation of Purchase Order from Sales Order

    Hi,
    please is it possible to know the use of flag "Create PO automatically" into Sales Order Item Category customizing setting? Perhaps automatic creation of PO for Third Party sales process.
    Thank you very much
    Kind Reards
    Andrea

    Hi friend,
    You are right that chekbox is used for third party only. And it will be used when you are using ALE when you have distributed system where your sales order is supposed to be created in different system and PO will be raised in different system.
    If you activate this field, the system automatically generates both a purchase order requisition for third-party schedule lines as well as a purchase order in the background when you save the sales order. This function has been designed for Application Link Enabling (ALE) but you can also use it when working with distributed systems.
    To avoid errors caused by incorrect system settings, we recommend that you carry out the SAPEVENT OCU_LINK\DS:TRAN.BD86 for your third-party material. If you SAPEVENT OCU_LINK\DS:TRAN.PFTS tasks 8097 (create)and 8114 (change) (by choosing "Extras -> Employee assignment -> Maintain"), you will receive workflow objects in your inbox, should any errors occur.

  • Purchase order rejection - status update

    Hi Experts,
    For PO and PR release ,I am developing the custom workflow .In that workflow user decision step to approving or rejecting for PO release/reject .In approve step I am able to release the po in background using  standard method in BUS2012 but in reject step I need to reject the po I am not able to get any std method or BAPI to reject the PO/PR.
    The above same problem I am facing in purchase order requisition.
    In invoice parking workflow I am facing same kind of problem , in this I need method to post the invoice.
    Need inputs on this to close the issues soon.
    I had checked forum ,but I didnu2019t get the hopeful answer.
    Regards,
    Ram.

    Hi Experts,
    Thanks for your reply .i had checked the BAPI : BAPI_PO_RESET_RELEASE but it not solving my problem. This bapi is use to cancel the po and change the status to in process,but in my case i need to reject the PO and status should be rejected.
    The same issue is coming for PR.
    Give some idea to post the parked invoice ,in background .Help to close this issue soon.
    Thanks in advance.
    Regards,
    Ram.

Maybe you are looking for