Sequence of collecting objects for transport in BI

I am making a display attribute to navigational attribute, kindly let me know the sequence of collecting objects for transport request.
i need to check in infocube as well in multi provider.
please let me know
thanks,
Venkat

Hi,
Make sure the Infoobjects(in which you are changing it from Display attirube to Nav attribute) and collect the other things in a seperate request (Infoproviders, the deativated transformations and the DTP followed by Queries). Release the request to QA/Prd in a sequence(Infoobject request first and the iinfoprovider request as followed by the successful movement of the first one.
The STMS automatically take cares the sequence of trasnporting the objects one by one to the destination system.
Regards,
Venkat S

Similar Messages

  • No object can select when collecting objects for transport

    Hi.Experts:
        When I use RSA1 and want to collect objects for transport,I found that no objects can be found for some object type,such as ISTD/TRFN etc, any body who know this situation?
    Best Regards
    Martin Xie

    Hi Martin,
    best way to collect objects into transport request is throught RSA1 -> Transport connection.
    in Transport connection, you have different options to collect objects into transport request.
    In data flow before...
    here you can see objects that are already have transport request, package...
    Regards
    Daya Sagar

  • Collecting Objects for Transport

    Hi,
    I have to transport a new cube, few of the info-objects for this cube are already active in QA. Also the application component and infoarea are active in QA. what all should I collect for transport, can someone provide me steps. After going to Transport Connection in RSA1 I’ve selected the cube, now it shows me the list containing application component, info area, info objects.. what should I do next.
    Thank you,
    Sam

    Use Option of Only Necessary Objects - Execute - Install
    Make sure you give right Package.
    Thanks,
    CP

  • Help in collecting objects for transport into Q

    Hi All,
    We have our Q environment ready and need to transport the data flows into Q. I know that we have to replicate the datasources in Q before doing any transports. I have a flow like below:
    R/3 -> ODS -> Cube. I have generated an export datasource on the ODS and created a datamrt infopackage to load from ODS to Cube. What is the correct way to collect them in transports. I read(in some of the earlier posts) that we need to transport the export datasource before transporting the Cube.
    Please suggest!!!
    Thanks,
    RPK.

    Hi,
    If you are using Version 7 , no need to worry about it. We can combine both ODS and CUBE with Dataflow before and after in a transport requet.
    But If I remember correctly, I had a datasource unavailability problem with both ODS and CUBE with Dataflow before and after in a transport requet in older versions.
    So, in older versions, Take ODS with DFBefore in a request , trnasport and import it first, Then Replicate teh data sources from teh context menu of self source system. And then take Cube in another request with DFB and DFAfter .Import it later.
    With rgds,
    Anil Kumar Sharma .P

  • Collecting objects for transports

    I'm trying to modify queries. When i open a query, it shows "white" as in it is modifiable.
    In tranport connection on AWB, when i click on Bex Truck, I see no standard Bex request assigned.
    I think the query is already assigned to some request, but since I want to me my own changes, how do i do it? What will happen to the changes that might have been recorded to another request.
    Thanks
    Fran

    Hi Fran,
    if you are not seeing nothing in by clicking on Bex Truck, maybe there is some released request...if you collect the objects (your query) in transport connection, you will be able to see if the object is embedded in a CR or not...(it is an info available on one column on the right side...).
    Anyway, if you create a new request and insert your query there, it's good, but pay attention: if the old CR (if still existing) will be transported later, old versions (generally speacking) overwrite the new ones...
    Hope it helps!
    Bye,
    Roberto

  • Business object for transport request creation

    Hi,
      I want to know the business object for transport request creation. Kindly help.
    Thanks and regards,
    Venkat.

    I am not sure but u can try this BO CTREQUEST.

  • Unblock a Object for Transport

    Hello Gurus,
    How Can I unblock a Object for Transport. My Transport is red ( Error). The Object is Blocked in Quality System...TW104
    What Can  I DO ??
    THANKSS
    Edited by: Baris Ozcan on May 13, 2008 10:17 AM

    Hi
       once your TR has released to further system and its became RED.IF this is correct as per my understanding,No need for going unblock the same transport request.because once its released go for creation of NEW Transport Request which are the objects has required ,make one TR and relase to further systems.(in u r case its Quality)
    just open the TR and check the log overview of the transport,
    whether any objects has missed or not avialble in quality system(might be the reason ur TR has RED)and anlyse the logs .you can find the solution to that.
    if u r is not relased to further systems and you want to change/ remove of the objects from the TR,then u can goto SE03 and unlock the TR and make fresh TR.
    mahesh

  • Collection of Objects for Transporting to Test Box

    Hi Experts,
    I am ready to transport from BW Dev system to Testing system.Actually some of the Objects activated before for diffrent applications like FI-CO,SD and CRM and exported to testing system.Now My turn to export some of the objects to test box.
    I am little bit in confusion.How do I collect the objects which I activted with my own request.I am sure I don't need to transport the Objects which already in Test box though my functional application required the same objects.If So how can I find which Objects are in Test box already or not.Is there any particular method to find which objects are not transported from Development to Testing.Please advise me.I need to finish my Transports by the tomorrow.I am running with urgency.
    Thanks,
    Suryam.

    Hi,
    Unfortunatelly for you, the best way is to collect through the transport collector in RSA1 all the objects that are needed for your solution.
    Normally if you did not change anything on objects that are already transported, the system will not collect them.
    But I would say that there is no added value to make a difference between stuff that were already transported and the other objects as in Dev you are aroking with them correctly....
    Hope it helps
    PYG

  • Collecting objects in transport request

    HI Experts,
                    My development is completed and now i have to collect the objects in transport request. my development is like
    1) infoobjects(new infoobjects and some are available in BIP already and some infoobjects have reference infoobjects, dependent object is in production)
    2)Infopackeage for Datasource
    3)DSO
    4) Infocube
    5)multiprovider
    6)queries and views
    7)web templates
    This is the first time I am collecting this many objects. So please give  sugessions how to collect these objects in a single transport request.
    Thanks and Regards,
    RAJ

    It is advisable to collect the objects in separate transport requests...the transport request should contain dependent objects
    1) collect all the InfoObjects
    2) collect all the cubes/DSO   (they need Infoobjects.. so they are dependent on 1)
    3) collect datasources/Infosources  (they need Infoobjects.. so they are dependent on 1)
    4) collect transformation  (they need 2 and 3)
    5) collect DTPs and InfoPackages   (they need 3, 4)
    6) collect the reports
    7) collect the web templates
    make sure these are transported in sequence... each on dependent on previous

  • Need help on Collecting Objects in Transports

    Hi All,
    I am collecting the Application Component for Transporting.While Collecting , i have given the grouping as "Neccessary Objects". But while executing,it is acting as a "Data Flow Before". It is installing all the below Objec ts.Please help on this Issue.
    Thanks,
    Jelina.

    Hi Jelina,
    After collecting objects, choose option as "Only Necessary objects" and then below the object collected you will find some dependant objects related to it.
    For eg: If you are collecting cube beside that is a check box which will be checked for transport.
    Below that you can find many things where that cube is used example--infoarea or info object.
    Beside that info area or info object you wil find a check box, right click and click on "Donot Transport Any below". So the object on which you clicked and the below objects will not be transported. Do the same thing for all the underlying objects.
    Hope it helps!!!
    Thanks
    Lavanya

  • Runtime error while collecting objects for activaton from  BC

    Hi gurus,
    While collecting objects from busines content for installation, it is giving runtime error whith below description.
    "UNCAUGHT_EXCEPTION" "CX_RSD_NAME_ERROR"               
    "SAPLRSDN_IOBJ" or "LRSDN_IOBJU35"               
    "RSD_IOBJNM_PARSE"               
    R3TR     FUGR     RSDN_IOBJ     
    An exception occurred which is explained in detail below.               
    The exception, which is assigned to class 'CX_RSD_NAME_ERROR', was not caught               
      and               
    therefore caused a runtime error.               
    The reason for the exception is:               
    Name 0SRVE_IS3___F00133 is invalid               
    Pl spot light on this .
    Thanks in advance.
    Message was edited by:
            sri sri

    Hi Sri / Vach,
    this note can help you and implement the same
    1102743 - Dump during activation of business content
    Thanks
    kishore

  • Problem in collecting objects for BI Contents installation

    Hi All ,
    While collecting objects in BI content i am getting some error. Every time in stus bar the status shows "Destination Check with client ". After this status comes the session logs out automatically and a Error massage come i.e. "PBI error : SAP System error ". and even no log is maintained in slg1.
    please help me.
    Regards,
    Rohit Garg

    Rohit,
    Before collecting the objects, select the proper source sytem (keyboard shortcut is Shift + F7), then collect the objects .. also as suggested you need to check if the RFC connection to your source system is woeking fine ..
    Thanks.

  • Unable to collect objects into transport request BI 7.0

    Hello all!
    I have a fresh installation of BI netweaver 2004s. When attempting create a  transport (in transport collection), I get the following error message:
    Changes cannot be made, display user only
    Object IOBJ xxxxxxxx couldn't be saved to order
    The message is repeated for about 50% of all the objects I'm trying to include in a transport...
    How can I fix this? Has anyone seen the problem before?
    Regards,
    F C

    I am not sure on which system(Dev,QA,PRD) you are trying to collect..looks like you dont have authorization ..but then if it is only infobjects and you have a transport request already created..you can try this
    goto se09..double click on your transport request you created.. go to change mode.. Go to Objects tab--> Add an entry like below:
    <b>R3TR</b> under project..
    <b>IOBJ</b> under Object type and
    <b><your infobject name></b> under object name..and save..
    Regards
    Manga

  • EVB COM Object for Transport

    The syncParam property of the syncOpt component seems to be missing. Does anyone know where I can download the correct version?
    Or does anyone have a API set for the C++ API's so I can use this property.
    I am trying to sync some tables down and others down only. Without this property does anyone have suggestions on how to accomplish this??
    Thanks in advance

    I am using 5.0.2, and according to the docs there is a SyncParam property that you can set to do a selective sync. When I enum the object the property is not their...
    And feedback is of much help....
    I have gotten around the problem for now by creating 2 packages with 2 different users. The first one syncs my upload data and the second contains my download only data, that I only need to pull when I start a new inventory.

  • Bi content objects collection for transport

    Hi Experts,
    may i know how can i colloect the technical contnet objects for transport?
    basically i already transport a  technical content content request to quality, after transporting i got the logs as some of the technical content objects have not been activated in quality, but i thougt i can directly activate the content objects by using the program RSDG_IOBJ_ACTIVATE and remaing programs for cubes,aggregates,data sources and all in quality sytem, but client dont want the mannuall activation in qulaity system, they are askig again i have  to transport the active(which are the objects  not in active version in quality) version from EST to ESQ and then re-import my main transport.
    so now again i have to activate the objects in develpment, may i know if i activate the program RSDG_IOBJ_ACTIVATE in se38 and transport the request to quality is it ok (here have to create a new request for this?) here in asingle request can i activate all objects which are not activated (i have to go for activation to info objects, cubes, data sources, update rules,transfer structures) is there any sequence steps to collect this object, please provide me
    Many Many thanks
    Mrudula

    Hi,
    Activate all the necessary objects and collect them in a single request and check for any inconsistencies or inactive objects in the requests before transporting it to the QA or PRD in SE03.
    Regards,
    rik

Maybe you are looking for

  • Yaourt issue

    if i do a yaourt -Syu --aur yaourt is searching every package on aur, and cant find it ofc. ==> Searching for new version on AUR acer_acpi: up to date acl: not found on AUR acroread: up to date amrnb: up to date atomix: up to date attr: not found on

  • Batch Derivation not happening consistently

    Dear Experts, Pls guide me to identify and resolve the following problem: I have configured the batch derivation and maintained the necessary condition records. The derivation event is defined as the GR for Production order. The problem is, for certa

  • Configure Air 2.5 SDK in Flex

    Guys, Pls help me with configuring Air 2.5 sdk on Flex builder 3 Thanks a lot

  • Error message when attempting to sync with itunes

    when i try to sync my phone it says "itunes cannot read the content of this iphone, go to the summary tab in iphone preferences and click restore" but i dont want to restore my phone. any other options?

  • What's the point of noscript

    hello; why bother with <noscript> tags if all the rest of the HTML will still render anyway; if you use a redirect such as <script>window.location=".../yeah.htm"</script> , you will still end up with a JS-enabled question at the redirected location,