SEQUENCE OF NUMBERING SCHEME IS TO BE CHANGED.

Hi All,
In iProcurement contracts we have the possibility to use numbering schemes.
After defining a numbering scheme we are able to use the defined scheme, when we define a
contract template. When we activate the
renumber button, the contract terms are numbered according to the chosen (defined) scheme.
The present numbering is like this:
Headsection A
Part 1
Part 2
Part 3
Headsection B
Part 1
Part 2
Part 3
But we want to change this to
Headsection A
Part 1
Part 2
Part 3
Headsection B
Part 4
Part 5
Part 6
iProcurement Super User -> Setup : Contract Terms -> Numbering Schemes
Product Version 11.5.10
Could any please suggest a workaround for thsi issue .

Amol,
You would have to " Back date" the uninstall date and time as well.The Oldest date that you could have here has to be greater than the "end date" of the Previous time segment for the piece of equipment
The current date and time is always defaulted for Uninstall and Installation process, You would need to manipulate the same. You will not be be able to change the dates of the old time segments once a record has been created.
Regards
Narasimhan

Similar Messages

How to change scene numbering schema

Is it possible to change the numbering schema for scenes? For example a sitcom with scene letters A-L or including episode number with scene number like 1.1-1.35 and 2.1-2.25? I'm a new user and so far all I see is automatic numbering 1-10.
Thanks!

Hi,
You can easily assign custom scene numbers to a scene by simply clicking on that scene number.
Now for 1.1-1.35 and 2.1-2.25 as scene numbers, Go to the first scene of that episode (say episode 1)and click on the scene number. Assign the custom number as 1.1 to that scene and click 'OK' . Now go to 'Production->Manage Scene Numbers' and check 'Automatically assign number to new scenes'. Now subsequent scenes will have scene numbers as '2.2,2.3,2.4......' .
So simply provide a custom number to first scene of an episode and you will have forthcoming scenes as required.
Give it a shot and do let me know if this helps.
Thanks,
Ankita-Story Team

Numbering schema in Product Hierarchy reg

Hello Experts,
We are implementing CRM 7.0, as part of the initial load we had downloaded DNL_CUST_PROD1 from ECC. But after replication we came to know that the numbering schema for Product Hierarchy is not 5,5,8 but changed to something else. When I tried doing the changes to numbering scheme, it is giving some error.
We havenu2019t created any Products or any master or transactional data.
Can you please help me in understanding how to change the numbering scheme and re-do the intial load.
Thank you.
KK

you missed to save it .
Dont maintain node 1 , 2 and 3 in one go.
Maintain your 1s then save, maintain your 2s then save, then maintain your 3rd level.

Strange display of a long sequence of numbers - Should I press OK ?

From type to time my iphone displays a long sequence of numbers and waits for me to press a green "OK" button. For example last sequence starts with 1259752976 1 199.664277......
Anybody knows what's going on ?

Yolanda,
Yolanda Arroyo wrote:
Hi folks,
I have problems with my Tuxedo cofiguration using domains.
I have Tuxedo8 installed in Linux 7.1. It connects to an Oracle 8.1.7 database,
and has 2 domains cofigured to connect to a remote domain. (this domain is in
fact WebLogic Server 6.1 running in the same machine)
If I run this configuration, the servers in LDOM2 (for example, server1) are not
able to connect to the database (this group don't include a TMS because is
associated with the domain, and I cannot put an OPENINFO information in that
group, for the same reason)
BUT!!!! the most amazing thing is that, if I make no changes in the bdmconfig
file, and in the UBBCONFIG I change the group WTC2 for a group that contains a
TMS, in this way:
I think that you are confusing the purpose of the 2 config files, ubbconfig and
dmconfig.
You should configure you application servers in the ubbconfig file. They
should be in server groups configured with the correct TMS servers, OPENINFO, etc.
One you have done this, you have a single domain.
To extend this to talk to external domains, now you need to configure the gateways.
Add a new server group to your ubbconfig and configure the domain gateway
processes (GWADM, DMADM, GWTDOMAIN) in it. This group does not need a TMS (TMS
services are provided by the domain gateway) or any OPENINFO.
Now, write a dmconfig file. This does not reference any servers it does
reference services that you want to import from other domains, or export to them.
I hope this explains how you can successfully get your configuration working...
Regards,
Peter.

Version numbering scheme?

I know captivate doesn't automatically handle version control and I'm OK with that.
However, we're starting to talk here about the schema for version numbering. That is, what constitutes a 2.0 release opposed to a 1.8 release?
In my former life working at a software production company we had very specific criteria that dictated if it was a 1.x.x release or a 1.x.x.x or what have you.
I'm curious if others are using version numbering schema and how are you determining what constitutes a change in which spot?
thanks

For what it's worth, the versioning scheme was a technical decision. After surveying large amounts of content on the web, we realized that there was a lot of Flash detection logic in the world that was going to break when we moved to 11.10.xxx.xxx. (12.0.0.x isn't completely without consequences, but it's better)
The roadmap that we publish is the best indicator of what new functionality is in the pipeline:
http://www.adobe.com/devnet/flashplatform/whitepapers/roadmap.html

Numbering Scheme for Legal Regulations

When we assign the same Numbering Scheme(1 scheme) to more than 2 legal regulations,
we cannot have more than 2 Export Control Classification Numbers in GTS material master.
（We cannot have more than 2 ECCNs for 1 item.）
We customize bellow,
(Legal Regulation) JPACT1-(Numbering Scheme) JPECCN1
(Legal Regulation) JPACT2-(Numbering Scheme) JPECCN1
(Legal Regulation) JPACT3-(Numbering Scheme) JPECCN1
In this case, we cannnot have different Numbers for 1 item, if we have below,
(Item) GTS10000-(ECCN) 1A001
(Item) GTS10000-(ECCN) 2A001
(Item) GTS10000-(ECCN) 3A001
->2A001,3A001 changes 1A001.
If we have different ECCNs for 1 item, do we divide Numbering Scheme?
(Legal Regulation) JPACT1-(Numbering Scheme) JPECCN1
(Legal Regulation) JPACT2-(Numbering Scheme) JPECCN2
(Legal Regulation) JPACT3-(Numbering Scheme) JPECCN3
If you know another ideas, could you tell me the way.
Regards,
Naoya Kaneda.

Hi,
Iam little confused as to why you want to assign 2 or more ECCN's to one product.
Multiple products with identical features and attributes can be assigned to the same ECCN's but what is the use of doing vice versa.
I know of a concept called set numbers. Number sets enable you to group tariff numbers from several numbering schemes together. You can then assign a set to a product or multiple products to classify that product with multiple tariff numbers at the same time, to simplify the classification process.
This not only allows cross-country grouping of tariff numbers but also cross application grouping. If you use several areas of SAP Global Trade Services, such as SAP Compliance Management and SAP Customs Management and SAP Risk Management for your import and export processing, you can group the numbering schemes for the relevant number types together in a set.
Regards
Vivek

Unable to update numbering schemes in define purchasing options

Hi,
We are unable to update the numbering scheme from manual to automatic in define purchasing options (Numbering Tab). Documentation says that you can update it, but it does not give any reason under what circumstances we would not be allowed to update the numbering schemes.
Thanks,
Ketul.

Hi Sandeep,
I am doing multi organisation implementation and only one ledger they do not require Inventory and Purchasing modules. Because of that i will not create any inventory organisation for that selected ledger.
This ledger will have seperate responsibility for AP.
Howver, my problem is when i am trying to complete the financial options, inventory organisation is mandatory for that responsability. Without inventory organisation i am unable to save the financial options.
Please assist me how to overcome this issue.
Thanks,

Why if I have created a seperate icloud account for my daughter and I, do I still end up with all her contacts? Also, numbers i have edited or changed?deleted pop up when searching by name to create a new message, WHY?

Help! I have created seperate icloud accounts for my kids devices and mine. My daughters contacts and mine keep merging anyways. If I turn contacts off and then back on on my phone in icloud, I get duplicates. Now I have triplicates!! I've double chcked that we are both logged in to our own accounts. How do I stop this, its gonna be a lot of editing out duplicate/triplicate contacts in my list. NOT HAPPY!! Another problem....When I go to create a new message and search by name, all numbers, including those I have changed because the person got a new number, will show up. Why is that happenning if I have deleted or changed them? I end up not knowing what number to use. It's extremely frustrating!!

When you turn contacts to off in Settings>iCloud, you should be choosing Delete from My iPhone when prompted, as they will be synced back to your phone when your turn contacts back to on. If you are choosing Keep on My iPhone, turning contacts back to on in Settings>iCloud, then choosing Merge when prompted, you are merging a second (or third) copy of your contacts with your account each time you do.
The autocomplete suggestions you get when you create a new message, compose a text message, or perform a spotlight search, are stored in cache memory. Once in cache memory, it remains on the device even if the corresponding contact is later deleted. Unfortunately, at the present time, the only way to flush this cashe is to restore your device as a new iPhone without using your backup. Perhaps this will change in a future iOS release.

Three Numbers questions:how do you change the auto default background or fill color from white to another color to use in multiple succeeding operations? what is the formula to express the ratio of two numbers as a percent?

Numbers questioons:
-how do I change the automatic default background fill color so it stays a non white color?
-what is the formula to express the ratio of two numbers as a percentage?
-how do I create a signal formula to be sue against an entire column of data (for example, if I wanted to multiply the each cell in the column by the number 10)?
-I have created a spreadsheet in Numbers with header and rows labelled and it contains formulas as well. I now want to create a new 'blank' of this template with same header and row names and formulas, but without the cell entries from my earlier exerciser so I can use again in the future. How do I do this?

Hi Matt,
For short columns, the easiest method is to select the cell containing the formula, then grab the fill handle (small circle at the botom right of the selected cell) and drag down.
For long columns, use either Jerry's suggestion (copy/paste) or Insert > Fill > Fill Down.
Copy/Paste:
Select the cell containing the formula. Copy
Select from the cell containing teh formula to the end of the column. Paste.
Fill Down:
After entering the formula, and pressing enter...
Click on the column reference tab to select the whole column.
Command click on each cell above the one containing the formula to remove it from the selection.
When cell with the formula is the top cell in the selection, go Insert > Fill > Fill Down.
Pick whichever is easiest.
Regards,
Barry

Export sequence from once schema to another using dbms_datapump

Hello,
Can anybody help me how to export only sequences from one schema to another using dbms_datapump or using any other packages.
I cannot use the expdp/impdp from command prompt.
Thanks.

Hello Richard,
No luck yet, it's new one now.
declare
l_dp_handle NUMBER;
v_job_state varchar2(4000);
l_last_job_state VARCHAR2(30) := 'UNDEFINED';
l_job_state VARCHAR2(30) := 'UNDEFINED';
l_sts KU$_STATUS;
v_logs ku$_LogEntry;
v_row PLS_INTEGER;
BEGIN
dbms_output.put_line('get_sequence - Started');
l_dp_handle := DBMS_DATAPUMP.open(operation => 'IMPORT',
job_mode => 'SCHEMA',
remote_link => 'PSUP_DATA',
version => 'LATEST');
dbms_output.put_line('get_sequence - get handle :'||l_dp_handle);
DBMS_DATAPUMP.add_file(handle => l_dp_handle,
filename => 'test.log',
directory => 'DMPDIR',
filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_LOG_FILE); dbms_output.put_line('get_sequence - add file');
DBMS_DATAPUMP.METADATA_FILTER(l_dp_handle, 'SCHEMA_LIST', '''PSUP_DATA'''); dbms_output.put_line('get_sequence - metadata filer1');
DBMS_DATAPUMP.METADATA_FILTER(l_dp_handle,
'INCLUDE_PATH_EXPR',
'IN (''SEQUENCE'')'); dbms_output.put_line('get_sequence - metadata filer2');
DBMS_DATAPUMP.METADATA_REMAP(l_dp_handle,
'REMAP_SCHEMA',
'PSUP_DATA',
'IRIS_DATA'); dbms_output.put_line('get_sequence - metadata remap');
DBMS_DATAPUMP.start_job(l_dp_handle); dbms_output.put_line('get_sequence - starting job');
DBMS_DATAPUMP.WAIT_FOR_JOB(l_dp_handle, v_job_state);
dbms_output.put_line('get_sequence - completed');
exception
WHEN OTHERS THEN
dbms_datapump.get_status(NULL, 8, 0, v_job_state, l_sts);
v_logs := l_sts.error;
v_row := v_logs.FIRST;
LOOP
EXIT WHEN v_row IS NULL;
dbms_output.put_line('logLineNumber=' || v_logs(v_row).logLineNumber);
dbms_output.put_line('errorNumber=' || v_logs(v_row).errorNumber);
dbms_output.put_line('LogText=' || v_logs(v_row).LogText);
v_row := v_logs.NEXT(v_row);
END LOOP;
RAISE;
end;
get_sequence - Started
get_sequence - get handle :58
get_sequence - add file
declare
ERROR at line 1:
ORA-31623: a job is not attached to this session via the specified handle
ORA-06512: at "SYS.DBMS_DATAPUMP", line 2772
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3886
ORA-06512: at line 43
ORA-39001: invalid argument value
I go ogled some of adive i could see is grant create table to user, but my user is having DBA role as well.
Please help.

HT5071 I am putting together a book with iBooks Author and all of my pages are numbered (3) how can I change them to an acceding order starting with page one?

I am putting together a book with iBooks Author and all of my pages are numbered (3) how can I change them to an acceding order starting with page one?

Sorry I didn't get the tip link right: Change page number style

Numbers for iPad.Can i change background color?

When using spreadsheets in numbers for iPad,can I change the background color of the screen while leaving the table white.I want to have a few tables on one spreadsheet and leave the the tables white.Can I do this and change the screen color surrounding the table?

(Numbers '09 answer, Numbers for iOS procedure may be similar.)
In Numbers '09 the Sheet is white (period), You can, however, place a coloured shape on the Sheet, and apply your desired fill colou to that shap, then ruse the Arrange menu to Move it to the Back, then resize it and position it as needed to fill the background.
Regards,
Barry

Using sequence in diff schema (OWB 10g R1)

I am trying to use a sequence belonging to instance A schema 1...in a mapping whose objects (source, target tables) are in instance B schema 2.
How do i do this in OWB ?
I imported the sequence from the schema 1 into the mapping using a DBLINK...betn the 2 schemas. i did not deploy the sequence using deployment mgr into target schema. I executed the mapping after deploying other objects...and I am getting an error: sequence doesn't exist.
i even stated the schema and the particular db link name in the configuration of the particular mapping before executing.
i am trying to run the following SQL statement (it inserts records appropriately in TOAD) using OWB....but am unable to generate a mapping in OWB with the @CDW.WORLD. That could be the potential problem.
INSERT INTO TEST_TARGET.TEST_TAB_VW (ATTRIBUTE, VALUE,PROFIT_CENTER,PC_ID)
VALUES ('TESTING','VAL',300098210,[email protected])
Your guidance will be invaluable.
Thank you all.
Message was edited by:
fire_fighting

Urghh,
developing and not being allowed to create a sequence. You have a tough task.
I can think of two ways to do this. But I can not test it myself, sorry.
First, create a source module. One in wich you normally only have source tables and views. Let this point to the database/schema where you have the sequence. with a dblink. Import the defenition of your sequence. Use your sequence in a mapping you make in a dwh module. If you generate the mapping, it should be with the dblink information. Just as it would generate the connection for a source table or view.
If this does not work. The dirty way is to make the sequence in the dwh module and just use it in your mapping. After deployment of your mapping, edit the mapping source. It is just plain pl/sql. Find every occurence of the sequence and replace it with one on the remote server. Perhaps you can make a macro for it.
There are many good reasons why you don't want to use post-generation-steps. Maintenance, documentation, error-prone etc.
But it works. :-)
Hope this helps.
Maarten Vinkhuyzen

Each time I type an apostrophe on pages it comes out as a divide sign and alters any preceding italicised text into meaningless letters and numbers. How do I change this?

Each time I type an apostrophe on pages it comes out as a divide sign and alters any preceding italicised text into meaningless letters and numbers. How do I change this?

Does this still happen if you set your font to Lucida Grande?
Could you use the camera icon here to post a screen shot of how this looks with the meaningless letters and numbers?

Cryptic sequence of numbers as sender name for invitations

When I want to send an calendar invitation to my business address, my sender name is a cryptic sequence of numbers instead of "first name last name". These are the steps:
1. Receiving Email form my iPad with the invitation
2. Download the attached ics to my desktop of the windows PC
3. Drag&Drop the ics to the Lotus Notes Calendar
4. The invitation is visible, the sender name is i.e. 2fjfu3oodsjdf90499fj993efj0ßßejfefjß39eß939hgsdlfnasdäfa9e9
I know that this invitation is from my private account. But what about friends I wanted to invite? Or should I invite only friends with apple equipment?!?! ;-)

Well,
Nokia MfE doesn't reply to my mails. I guess that only poeple using MfE v 2.09.158 who are not registered to the MfE Service (I guess you have to pay a monthly fee as it is with the Blackberry service) have the sender name problem. Of course you can use MfE with other mail providers than Nokia MfE. But in this case "Mail for Exchange" will appear as sender name.
I now switched over to MfE's competitor "RS" and don't have this annoying problem anymore. The alternative to RS would be using the old MfE version where I didn't have that sender name prob. But as my battery was empty after 15 hrs using the old MfE version (with RS my battery lasts 3 days !!!) there is no real alternative to RS!
This sender name problem seems to be part of Nokia's business strategy. As they want to compete with Blackberry they want you to register (and pay the MfE mail service monthly). Probably that's the reason why you get MfE for free (RS costs 50 US$).
Any comments on my theory?!
BR, Johnny

SEQUENCE OF NUMBERING SCHEME IS TO BE CHANGED.

Similar Messages

Maybe you are looking for