Serial Number changes not allowed at Goods receipt level
Hi Gurus,
I have created serial number at the time production order creation. But at the time of goods receipt my user change the serial number manually and save the document. My requirement is system should not allow changing the serial number in goods receipt level.
Example:
Prod. Order: 10001
Qty: 1
Serial No: 20100001.
At the time of goods receipt user change the serial number as 20100003.
Is it possible to restrict the serial number changes at goods receipt level?
Thanks in Advance,
Regards,
S.Babusingh
Hi,
Not in front of the system, but if i remember correctly one of these enhancements has a check on serial numbers,
1. User exit -> MBCF0002
2. BADi -> WORKORDER_GOODSMVT or MB_DOCUMENT_BADI
Check & revert if it meets your need.
Regards,
Vivek
Similar Messages
-
Unable to upload serial number from desktop while doing goods receipt MB01
Hi,
We have upgraded our system from 4.7EE to ECC6.0. While doing goods receipt for purchase order (MB01) in ECC 6 for serial number profile material, I can't find the option for uploading serial number from desktop where as the same option was there in 4.7.
Please help me .....
Thanks
Nrusingha DashHi Experts.,
Thanks for all of you for responding my questions.
I found my question resloved.
Actually, in previous version, the standard program has been modified by taking access key. When the upgradation happened, it got overwrited to the previous one. So, in recent version it is not appearing. -
Creating more than one serial number for a material upon Goods Receipt
I am trying to configure the system to create more than one serial number automatically for a material and have the equipment record created at the same time with the same number as the serial number. For example using MB1C, receiving a material for a quantity of 2, the Maintain Serial number pop up box appears, selecting the 'Create serial number automatically' , I receive an error message ' Number of numbers to be assigned must be 1
Message no. NR030
Can someone help me with this issue.I have tried MIGO and get the same error. The Plant data/stor 2. tab of the material master for this particular material is set as follows
Serial no. profile NS01 SerLevel 1 Keep equipment number and serial number synchronous.
Would there be configuration missing? -
Serial number is not getting updated in GR
Problem: Serial number in not getting updated GR document (in stock) while going GR for production order.
We are using u201CBAPI_GOODSMVT_CREATEu201D to do production order GR in one development. And we have used serial number profile in which we kept GR as optional. Please fine details of serial number profile as below. We have a restriction that we can not make GR mandatory in serial number profile.
MMSL Maintain goods receipt and issue doc. 02 02
PPAU Serial numbers in PP order 02 01
PPRL PP order release 04 01
PPSF Serial nos in repetitive manufacturing 03 01
QMSL Maintain inspection lot 02 01
SDAU Serial numbers in SD order 01 01
SDCC Completness check for delivery 02 01
SDCR Completion check IR delivery 02 01
SDLS Maintain delivery 02 01
SDRE Maintain returns delivery 02 02
As we are passing serial number in BAPI while doing GR but still is not getting updated in GR document. When we check stock in MMBE, it is not showing any serial number.
Please suggest solution.
Thank you.Hi Chetan,
Since your MMSL procedure is optional, you cannot carry assignment of Serial Numbers against goods Movement. Though you are passing serial numbers during GR, but Serial Numbers are linked only upto Production Order Level, not upto the Stock. The only option to display the Serial numbers against Stock can be done using MMSL procedure as 3. We also faced the similer situation, whenever ur doing automatic goods movement with MMSL as 02 [Auto GR], One possible solution, is to create a custom program to complete ur GR like using Call Transaction BDC -MB32, not as standard SAP Auto GR, & need to make MMSL as 3...so that both purpose gets served [ Serial number linking to stock & Automatic GR using custom program]
Please share, if you get any better idea
Krishna Kulkarni -
Stock data of serial number 90645 not suitable for Movement.
HI Friends,
We are having issue while doing return delivery for a service/Repair order, the serial number related error messages are coming.
the error messages are
1. Stock data of serial number 90645 not suitable for Movement.
2 . Serial number can not be used here.
3 termination of gods issue posting for delivery note 855222.
The following points explain the scenario..
1. The Previous and next documents are through with the post Goods receipt for the same material with different serial numbers.
2. The movemnt is 653 E
3 Client placing one service/repair order and creating return delivry against this order and assign serial number and trying to post Goods receipt.
4 The serial number profile is having Exist/ indicator for SDRE return delivery serial usage is 'optional' and Equipe' with equirement'
RobertHi Anybody come across this requirement.
-
I purchased CS5 Design Standard about 5 years ago. Now I am trying to install second PC, but I got a message like " This serial number is not correct." I want to know the correct serial number, but I missed my ex adobe ID because I've changed my E-mail address.
It is not clear to me what your issue is with not being able to sign in to your Adobe account to find the serial number. You should still be able to sign in and find your serial number if you registered the software.
If your first PC is a Windows machine you might be able to extract the serial number from it using the Belarc Advisor
http://www.belarc.com/free_download.html -
my ipad will not power up at all, serial number from ipad is DM*****183, serial number from 10/15/2013 walmart receipt is SD*****183 I wish to send unit in for warranty service model # A1458 also looking for apple support phone number
<Edited by Host>Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom
Service Answer Center - iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
iPad Support
http://www.apple.com/support/ipad/contact/
Message was edited by: Texas Mac Man -
Serial number management only allows whole numbers
Hi
If we have a material that has EA has basis unit of measure and KG for
order unit, when doing goods receipt against purchase order:
Situation 1:
Qty in Unit of Entry 1.000 KG
Qty in SKU 100 EA
Qty in Delivery Note 100 EA
No error message.
Situation2 :
Qty in Unit of Entry 999 KG
Qty in SKU 99,900 EA
Qty in Delivery Note 100 EA
and we get error message serial number management only allows whole
numbers. Quantity delivered is the same in basis unit so why is the
system producing the error message? Is there a way of avoiding this?
BRHi,
Serial numbers are maintained for quantity in base unit of measure.
In your example quantity is not a whole number (99,9 EA). 1 serial number is assigned to each unit; however system is unable to create serial number for 0,9 units here.
You cannot use serial number if you have units which have decimals.
Check serial number profile assigned to material in material master.
If stock check is not very important, try to change stock check setting to warning for serial number profile in IMG txn OIS2.
Best regards,
Ramki -
IO231: Stock data of serial number &1 not suitable for movement
Hi experts,
I have unique problem with serialized material posting.We are having serialized managed materials which are posted to quality inspection stock.The user was able to post partial quantity to unrestricted after usage decision but when tried to post remainig quantity it is giving error 'IO231: Stock data of serial number &1 not suitable for movement".I checked serial number history in iq02 & it shows that same serial numbers were used for some order in the past which is already delivered.I am not able to understand how it allowed to post same serial numbers again for the same material and if it is normal why it is giving above error when we try to post remaining quantity?
I tried by changing serial profile in the material master with all optional fields and without stock check and equipment and try to post but its not working.
I want to somehow post material to unrestricted use from quality inspection with or without serial numbers.
I am working on 4.7 system
Can u guys help me.
Thanks & Regards,
Sachin.Hi,
Please check this SAP Note: 213861, 1229108
From Note 213861
Release 4.0A or 4.0B:
Table T156S
Maintain the data using Transaction SM31.Flag for transport using Transaction SE16.
All entries for movement types 645 and 647 should be filled with '****' in field T156S-VRGNG.
Release 4.5A or 4.5B:
Table T156S
Maintain the data using Transaction SM31.Flag for transport using Transaction SE16.
All entries for movement types 645, 647 and 675 to 678 should be filled with '****' in field T156S-VRGNG.
Release 4.6A to 4.6C:
Table T156SY
Maintain the data using Transaction SM30 using view V_T156SY.If necessary, manually flag for transport in this transaction.
All entries for posting string references 645 or 647 should be filled in field T156SY-VRGNG_S or T156SY-VRGNG_H with '****'.
For Note 1229108
A correction instructions has given Please take help from BASIS Team....
This will solve the Problem...
Regards
GK.
Edited by: Gnana Kumar on Nov 3, 2010 7:16 AM -
Our users here want to change the serial number of an equipment which they mistyped. I tried the option of Edit->Change Serial Number Functions->Change Serial Number in IE02. The system displayed an error saying the User Status doesn't allow for Serial Number change. Is there any config in the system where we can control for which User Statues we can allow for Serial Number Change.
Hi,
Presently your equipment must be having a user status active.
Now got to SPRO>>>Plant Maintenance and Customer Service>>>Basic Settings>>>Define User Status. or tcode - OIBS
Select Status Profile assigned to your equipment.
In that status profile double click on your status which is presently active on your equipment.
There you will be able to see reason due to which serail number change is not allowed. -
My serial number is not verified
I've been trying to get my 2 year-old iPod serviced for a battery change but the website will not accept my serial number. I called Apple's number but did not get a solution. I have e-mailed Apple and am still waiting for a reply. In the meantime, I can only wonder why my serial number is not verified although the information did come up for me when I talked to Apple over the phone
I never said everything was ok. They told me everything was ok and that I should just keep trying because this has never happened before. So I'm left to my own devices. I've emailed Apple and haven't gotten any response back for well over a week. Now you're concerned that I entered someone else's SN. I can't enter my own number. Did you miss reading that part?
In any case, let me repeat myself before I get anybody else angry. I'm going to the Apple store and getting this straightened out in person and not entering somebody's SN. And please, no more condescending nonsense about where to find the serial number. I know that and I'm entering it, letter for letter and number for number. I think I've mentioned this about 58 times already. I enter the number. It isn't verified. Apple doesn't know/care. Conclusion: my iPod is not being serviced in the quickest possible time that it should be. -
Error in allocating Despatch serial number Interval not found Number object
Hi All,
While saving the Excise Invoice(created w.r.to Invoice) in J1IIN system is throwing the error:
"Error in allocating Despatch serial number Interval not found Number object J_1IINTPR2
Message no. 8I336"
The Excise Group(say 99) was created.
But the same is not reflecting in the drop down list of SNUM for maintaining the No.Range in the Object J_1IINTPR2.
Do the needful to resolve this issue.
Needless to say helpful answers will be rewarded.
Regards,
Raj Kumar Reddy.Dear Raj,
Go to Excise group details here you check these settings
IMG>Logistics general>Tax on Goods movements>India>Basic settings-->Maintain Excise groups
Have you check all these check boxes
1.Excise Inv during billing
2.Create and Post Invsingle step
3,Depot Excise invoice
4.EI capture
5.Diuty Different at GR
6.EI create/RG23D selection
7.Update RG1 at MIGO
I hope this will help you,
Regards,
Murali. -
i purchased CS2 online from amazon ... the serial number did not work... I then went to live chat and they guided me to a new number..
it does not work either... what can i do?????Is it possible you had a previous install or demo on your disk?
In that case, try deleting these files:
/Library/Receipts/Shake4.1.pkg
/Library/Application Support/ProApps/Shake System ID
Then repair disk permissions using this:
/Applications/Utilities/Disk Utility
and try again. -
While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get to the chat. Please advise!!!!
MoeGhazal I reviewed your account and it looks like you have have upgraded from a CS4 volume license for Design Premium to a retail upgrade of Design Premium 5.5.
I also show that you made two purchases of CS5.5 Design Premium but the second purchase was canceled. Please make sure you are utilizing the serial number which ends in 7886.
If you are using the correct serial number then it is likely the installer will not recognize your volume license CS4 serial number as being valid for an upgrade. If you can contact our support team then you can be walked through an unlocking procedure to allow you to proceed with the installation. You can contact our support team directly at Contact Customer Care. You may want to try installing a web browser you have not previously utilized. It is likely a toolbar or some other software application is affecting your ability to access chat support successfully.
If you are still unable to reach our support team then please verify the information under your account is accurate. If you can please then update this discussion after confirming this then I can request a member of our support team contact you directly.
Again I would recommend reaching out directly if possible as it will be the most efficient method of resolving your current error. -
The Reservation item is not allowed for goods movements
Hi Experts,
When i do the goods movements against the reservations in
MIGO, I encounter the below error.
The reservation
xxxxxxx item xxxx is not allowed for Goods Movement.
Can you please suggest on this.
Regards,
Venkat.What is the message number ?
Can you please check the goods movement allowed for reservation in MB22 :
Maybe you are looking for
-
Mailbox duplicated with exclamation mark
-
Problem during material variant creation
Hi Guys, I am trying to create material variant in MM01. I entered configurable material let's say DESKTOP. nOw i have partial variant scenario so instead of entering all 30 characteristics i need to enter only 3 characteristics.These 3 charcteristic
-
The File "(file name)" is an iTunes Store File and can't be burned to MP3cd
I am using the most recent updates to OS 10.4.8 and iTunes 7. I am getting this error stating that iTunes Store Files, which are also protected AAC files, can neither be burned to MP3 CD or converted into MP3 files. I also tried using Roxio Toast, mo
-
Sum array elements not working
I am trying to output the average % standard deviation per point for a series of data sets. To do this I want to use the sum array elements function. The program I have written should work I am pretty sure, but when I watch data flow through it, 10
-
Inserting paragraph rules into a nested style.
Is it possible to create a style which includes a paragraph rule which can be used in a nested style. Character styles do not seem to allow rules, and nested styles seem to use character styles only when they are being built. The nested style is remo