Serious performance issues and no sound???
I just purchased a PM8M-V VIA P4M800 + VT8237 Chipset Basedd motherboard, for the primary reason that my EVGA GeForce 6600 GT 128MB video card was having random artifacts popping up all over the screen. My problem is my performance is very laggy (2 FPS in Battlefield 2...version 1.1.2554-356.0, lowest video quality settings, tried it at both 1024x768 and 800x600 and I've messed around with the desktop resolution); I opened up the task manager during battlefield 2 and it showed 100% PC usage, which never went down during the game. I set the video card AGP apeture size to 256 MB which helped the performance a tad. Also, the video swap memory I set to the lowest possible in the BIOS. Drivers for both the new mother board and the EVGA card are installed up to date. I ran Norton and Adaware, my comp is clean, and I also ran disk defrag. I haven't done disk cleanup, ETC but I figured something that small couldn't effect performance that bad. I saw something in the BIOS about changing the AGP Voltage, not sure if I should screw with this setting
My second problem is I have no sound. My sound is a built in card and it reads, verbatum (from the Motherboard manual)
AC97 link controller integrated in VT8237R
Realtel ALC655 6-Channel Software audio codec
- Compliant with AC97 v2.2 spec
Again, the drivers are all up-to-date on the sound, as well
Here again are my PC stats
MSI PM8M-V motherboard
VIA P4M800 + VT8237 Chipset Based
Intel 2.0 GHZ Processor
1 gig RAM
EVGA GeForce 6600GT 128MB video
40 GB hardrive which isn't full
Upgraded power supply to handle all of the hardware
The EVGA card isn't the problem; I'm positive of that because I already returned it to newegg.com and they sent me a new one that had the same problem. Any other suggestions? Again, performance is horrible and I have no sound, even with updated drivers
please, reply to this post, or email me a solution at [email protected]. I'm desperate to use my $400 in computer stuff I bought
If you want, I can email you the dxdiag.txt file, I've heard that can help greatly to see that info...
dxdiag.txt part 2
DirectX Components
ddraw.dll: 5.03.0001.0904 English Final Retail 7/9/2004 05:27:28 292864 bytes
ddrawex.dll: 5.00.2134.0001 English Final Retail 5/8/2001 08:00:00 24336 bytes
dxapi.sys: 5.00.2180.0001 English Final Retail 5/8/2001 08:00:00 10064 bytes
d3d8.dll: 5.03.0001.0904 English Final Retail 7/9/2004 05:27:28 1201152 bytes
d3d8thk.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 7168 bytes
d3d9.dll: 5.03.0001.0904 English Final Retail 7/9/2004 05:27:28 1703936 bytes
d3dim.dll: 5.00.2180.0001 English Final Retail 12/12/2002 01:14:32 446224 bytes
d3dim700.dll: 5.03.0001.0902 English Final Retail 5/30/2003 10:00:02 797184 bytes
d3dref.dll: 5.00.2180.0001 English Final Retail 5/8/2001 08:00:00 93456 bytes
d3dramp.dll: 5.00.2180.0001 English Final Retail 12/12/2002 01:14:32 591120 bytes
d3drm.dll: 5.00.2134.0001 English Final Retail 12/12/2002 01:14:32 364816 bytes
d3dxof.dll: 5.00.2135.0001 English Final Retail 12/12/2002 01:14:32 49424 bytes
d3dpmesh.dll: 5.00.2134.0001 English Final Retail 12/12/2002 01:14:32 37648 bytes
dplay.dll: 5.00.2134.0001 English Final Retail 5/8/2001 08:00:00 33040 bytes
dplayx.dll: 5.03.0001.0904 English Final Retail 7/9/2004 05:27:28 230400 bytes
dpmodemx.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 77824 bytes
dpwsock.dll: 5.00.2134.0001 English Final Retail 5/8/2001 08:00:00 42768 bytes
dpwsockx.dll: 5.03.0001.0904 English Final Retail 7/9/2004 05:27:28 79360 bytes
dplaysvr.exe: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 28160 bytes
dpnsvr.exe: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 16896 bytes
dpnet.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 723968 bytes
dpnlobby.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 3072 bytes
dpnaddr.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 3072 bytes
dpvoice.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 381952 bytes
dpvsetup.exe: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 80896 bytes
dpvvox.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 112128 bytes
dpvacm.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 19968 bytes
dpnhpast.dll: 5.03.0000.0901 English Final Retail 3/24/2003 10:00:02 32768 bytes
dpnhupnp.dll: 5.03.0000.0901 English Final Retail 3/24/2003 10:00:02 68096 bytes
dpserial.dll: 5.00.2134.0001 English Final Retail 5/8/2001 08:00:00 53520 bytes
dinput.dll: 5.01.2600.0881 English Final Retail 10/30/2001 09:10:00 645120 bytes
dinput8.dll: 5.01.2600.0881 English Final Retail 10/30/2001 09:10:00 664576 bytes
dimap.dll: 5.01.2600.0881 English Final Retail 10/30/2001 09:10:00 44032 bytes
diactfrm.dll: 5.01.2600.0881 English Final Retail 10/30/2001 09:10:00 459264 bytes
joy.cpl: 5.01.2600.0881 English Final Retail 10/30/2001 09:10:00 326144 bytes
gcdef.dll: 5.01.2600.0881 English Final Retail 10/30/2001 09:10:00 206336 bytes
pid.dll: 5.01.2600.0881 English Final Retail 10/30/2001 09:10:00 31744 bytes
gameenum.sys: 5.00.2195.6655 English Final Retail 6/19/2003 12:05:04 9808 bytes
dsound.dll: 5.03.0001.0904 English Final Retail 7/9/2004 05:27:28 381952 bytes
dsound3d.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 1294336 bytes
dswave.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 18432 bytes
dsdmo.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 186880 bytes
dsdmoprp.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 491520 bytes
dmusic.dll: 5.03.0001.0904 English Final Retail 7/9/2004 05:27:28 122880 bytes
dmband.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 27136 bytes
dmcompos.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 58368 bytes
dmime.dll: 5.03.0001.0904 English Final Retail 7/9/2004 05:27:28 181248 bytes
dmloader.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 33280 bytes
dmstyle.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 98816 bytes
dmsynth.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 100864 bytes
dmscript.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 76800 bytes
dx7vb.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 602624 bytes
dx8vb.dll: 5.03.0001.0902 English Final Retail 5/30/2003 10:00:02 1189888 bytes
dxdiagn.dll: 5.03.0001.0904 English Final Retail 7/9/2004 05:27:28 1769472 bytes
mfc40.dll: 4.01.0000.6140 English Final Retail 5/8/2001 08:00:00 924432 bytes
mfc42.dll: 6.00.9586.0000 English Beta Retail 6/19/2003 12:05:04 1015859 bytes
wsock32.dll: 5.00.2195.6603 English Final Retail 6/19/2003 12:05:04 21776 bytes
amstream.dll: 6.05.0001.0900 English Final Retail 12/12/2002 01:14:32 64512 bytes
devenum.dll: 6.05.0001.0902 English Final Retail 5/30/2003 10:00:02 132608 bytes
dxmasf.dll: 6.04.0009.1131 English Final Retail 3/2/2005 07:38:52 498717 bytes
mciqtz32.dll: 6.05.0001.0900 English Final Retail 12/12/2002 01:14:32 34304 bytes
mpg2splt.ax: 6.05.0001.0900 English Final Retail 12/12/2002 01:14:32 136192 bytes
msdmo.dll: 6.05.0001.0900 English Final Retail 12/12/2002 01:14:32 13312 bytes
encapi.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 18944 bytes
qasf.dll: 9.00.0000.2980 English Final Retail 12/11/2002 18:34:40 241664 bytes
qcap.dll: 6.05.0001.0900 English Final Retail 12/12/2002 01:14:32 257024 bytes
qdv.dll: 6.05.0001.0904 English Final Retail 7/9/2004 05:27:28 316928 bytes
qdvd.dll: 6.05.0001.0904 English Final Retail 7/9/2004 05:27:28 470528 bytes
qedit.dll: 6.05.0001.0900 English Final Retail 12/12/2002 01:14:32 1798144 bytes
qedwipes.dll: 6.05.0001.0900 English Final Retail 12/12/2002 01:14:32 733184 bytes
quartz.dll: 6.05.0001.0907 English Final Retail 8/30/2005 09:14:00 1227776 bytes
strmdll.dll: 4.01.0000.3928 English Final Retail 6/19/2003 12:05:04 246544 bytes
iac25_32.ax: 2.00.0005.0053 English Final Retail 5/8/2001 08:00:00 199680 bytes
ir41_32.ax: 4.51.0016.0003 English Final Retail 5/8/2001 08:00:00 848384 bytes
ir41_qc.dll: 4.30.0062.0002 English Final Retail 5/8/2001 08:00:00 120320 bytes
ir41_qcx.dll: 0.00.0000.0000 English Final Retail 5/8/2001 08:00:00 338432 bytes
ir50_32.dll: 5.2562.0015.0055 English Final Retail 5/8/2001 08:00:00 755200 bytes
ir50_qc.dll: 5.00.0063.0048 English Final Retail 5/8/2001 08:00:00 200192 bytes
ir50_qcx.dll: 5.00.0064.0048 English Final Retail 5/8/2001 08:00:00 183808 bytes
ivfsrc.ax: 5.10.0002.0051 English Final Retail 5/8/2001 08:00:00 154624 bytes
mswebdvd.dll: 6.05.0001.0900 English Final Retail 12/12/2002 01:14:32 324096 bytes
ks.sys: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 130304 bytes
ksproxy.ax: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 117248 bytes
ksuser.dll: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 4096 bytes
stream.sys: 5.03.0001.0904 English Final Retail 7/9/2004 05:27:28 48512 bytes
mspclock.sys: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 5248 bytes
mspqm.sys: 5.00.2134.0001 English Final Retail 9/25/1999 11:36:32 4816 bytes
mskssrv.sys: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 7424 bytes
swenum.sys: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 4096 bytes
mstee.sys: 5.03.0000.0900 English Final Retail 12/12/2002 01:14:32 5504 bytes
bdaplgin.ax: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:04 16896 bytes
bdasup.sys: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:04 11392 bytes
msdvbnp.ax: 6.05.0001.0900 English Final Retail 7/9/2004 03:58:18 52224 bytes
psisdecd.dll: 6.05.0001.0900 English Final Retail 7/9/2004 03:58:34 354816 bytes
psisrndr.ax: 6.05.0001.0900 English Final Retail 7/9/2004 03:58:36 30208 bytes
ipsink.ax: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:06 14848 bytes
mpeg2data.ax: 6.05.0001.0900 English Final Retail 7/9/2004 03:58:12 57856 bytes
ndisip.sys: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:30 10112 bytes
mpe.sys: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:10 15104 bytes
streamip.sys: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:40 14976 bytes
msvidctl.dll: 6.05.0001.0900 English Final Retail 7/9/2004 03:58:08 480256 bytes
slip.sys: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:38 10880 bytes
nabtsfec.sys: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:28 83968 bytes
ccdecode.sys: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:06 16384 bytes
vbisurf.ax: 5.00.2157.0001 English Final Retail 5/8/2001 08:00:00 29968 bytes
msyuv.dll: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:26 16896 bytes
kstvtune.ax: 5.03.0001.0904 English Final Retail 7/19/2004 17:19:30 285696 bytes
ksxbar.ax: 5.03.0001.0902 English Final Retail 7/9/2004 03:58:10 39424 bytes
kswdmcap.ax: 5.03.0000.0900 English Final Retail 7/9/2004 03:59:26 226304 bytes
wstcodec.sys: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:44 18688 bytes
wstdecod.dll: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:48 47104 bytes
msdv.sys: 5.03.0000.0900 English Final Retail 7/9/2004 03:58:14 56832 bytes
DirectShow Filters
WDM Streaming VBI Codecs:
NABTS/FEC VBI Codec,0x00200000,2,1,,5.03.0000.0900
CC Decoder,0x00200000,2,1,,5.03.0000.0900
WST Codec,0x00200000,1,1,,5.03.0000.0900
DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,,
WMSpeech Decoder DMO,0x00600800,1,1,,
Mpeg4s Decoder DMO,0x00800001,1,1,,
WMV Screen decoder DMO,0x00800001,1,1,,
WMVideo Decoder DMO,0x00800001,1,1,,
Mpeg43 Decoder DMO,0x00800001,1,1,,
Mpeg4 Decoder DMO,0x00800001,1,1,,
DivX Decoder Filter,0x00800000,1,1,divxdec.ax,5.02.0001.1335
RTP Source Filter,0x00200000,0,1,dxmrtp.dll,5.00.2195.6611
RTP Render Filter,0x00200000,1,0,dxmrtp.dll,5.00.2195.6611
VP6 Decompressor,0x00800000,1,1,vp6dec.ax,6.04.0002.0000
3ivx D4 Video Encoder,0x00100000,1,1,3ivxDSEncoder.ax,4.05.0001.0030
Vorbis Decoder,0x00600000,1,1,OggDS.dll,0.09.0009.0005
ffdshow MPEG-4 Video Decoder,0xff800001,2,1,ffdshow.ax,1.00.0002.0024
Full Screen Renderer,0x00200000,1,0,quartz.dll,6.05.0001.0907
CoreVorbis Audio Decoder,0x00800000,1,1,CoreVorbis.ax,1.01.0000.0079
ffdshow raw video filter,0x00200000,2,1,ffdshow.ax,1.00.0002.0024
3ivx D4 Video Decoder,0x00800000,1,1,3ivxDSDecoder.ax,4.05.0001.0030
Nero Scene Detector 2,0x00200000,2,0,NeSceneDetector.ax,1.00.0000.0007
ffdshow Audio Decoder,0x3fffffff,1,1,ffdshow.ax,1.00.0002.0024
DV Muxer,0x00400000,0,0,qdv.dll,6.05.0001.0904
3ivx D4 Media Muxer,0x00200000,1,1,3ivxDSMediaMux.ax,4.05.0001.0030
Nero Digital Audio Decoder,0x00600000,1,1,NeAudio.ax,1.00.0004.0037
DV Scenes,0x00200000,1,1,NVDV.dll,
Color Space Converter,0x00400001,1,1,quartz.dll,6.05.0001.0907
WM ASF Reader,0x00400000,0,0,qasf.dll,9.00.0000.2980
Intel RTP SPH for G.711/G.723.1,0x00200000,1,1,dxmrtp.dll,5.00.2195.6611
Nero Digital Null Renderer,0x00200000,1,0,NeNDMux.ax,2.00.0000.0008
AVI Splitter,0x00600000,1,1,quartz.dll,6.05.0001.0907
VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.05.0001.0907
Indeo® video 5.10 Compression Filter,0x00200000,1,1,ir50_32.dll,5.2562.0015.0055
Windows Media Audio Decoder,0x00800001,1,1,msadds32.ax,4.01.0000.3917
PCM Silence Suppressor,0x00200000,1,1,dxmrtp.dll,5.00.2195.6611
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.05.0001.0900
Nero Digital File Writer,0x00200000,1,0,NeNDMux.ax,2.00.0000.0008
MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.05.0001.0907
Indeo® video 5.10 Decompression Filter,0x00640000,1,1,ir50_32.dll,5.2562.0015.0055
H261 Decode Filter,0x00200000,1,1,h261_32.ax,5.00.2195.6611
Nero Mpeg Audio Encoder,0x00200000,1,1,NeAudioEnc.ax,1.00.0000.0004
CoreCodec DynEQ,0x00200000,1,1,dyneq.cll,1.00.0002.0000
H263 Decode Filter,0x00200000,1,1,h263_32.ax,5.00.2195.6611
MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.05.0001.0907
SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.05.0001.0907
MPEG Layer-3 Decoder,0x00810000,1,1,l3codecx.ax,1.09.0000.0311
Nero Audio Stream Renderer,0x00200000,1,0,NeRender.ax,1.00.0001.0008
Intel RTP Demux Filter,0x00200000,1,1,dxmrtp.dll,5.00.2195.6611
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.05.0001.0900
Nero Digital Muxer,0x00200000,2,1,NeNDMux.ax,2.00.0000.0008
CoreCodec Audio Source,0x00600000,0,1,ccaudiosource.cll,0.05.0000.1150
Intel RTP SPH for Generic Audio,0x00200000,1,1,dxmrtp.dll,5.00.2195.6611
ACELP.net Sipro Lab Audio Decoder,0x00800001,1,1,acelpdec.ax,1.04.0000.0000
Nero QuickTime(tm) Video Decoder,0x00400000,1,1,NeQTDec.ax,1.00.0000.0004
Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.05.0001.0907
MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.05.0001.0907
WavPack Audio Decoder,0x00600000,1,1,WavPackDSDecoder.ax,1.00.0003.0431
File Source (Netshow URL),0x00400000,0,1,wmpasf.dll,9.00.0000.2980
Nero Format Converter,0x00200000,1,1,NeroFormatConv.ax,1.00.0000.0050
DV Splitter,0x00600000,1,2,qdv.dll,6.05.0001.0904
Windows Media Video Decoder,0x00800000,1,1,wmvds32.ax,3.00.0000.3433
Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.05.0001.0907
CoreFLAC Audio Source,0x00600000,0,0,CoreFLACDecoder.ax,0.04.0000.0046
3ivx D4 Media Splitter,0x00800000,1,1,3ivxDSMediaSplitter.ax,4.05.0001.0030
Haali Media Splitter,0x00600001,0,1,splitter.ax,
Nero ES Video Reader,0x00600000,0,1,NDParser.ax,2.00.0002.0034
CoreFLAC Audio Decoder,0x00600000,1,1,CoreFLACDecoder.ax,0.04.0000.0046
DV Source Filter,0x00400000,0,1,NVDV.dll,
Nero Audio CD Filter,0x00200000,0,1,NeAudCD.ax,1.00.0000.0001
Windows Media Multiplexer,0x00600000,1,1,wmpasf.dll,9.00.0000.2980
ASX file Parser,0x00600000,1,1,wmpasf.dll,9.00.0000.2980
ASX v.2 file Parser,0x00600000,1,0,wmpasf.dll,9.00.0000.2980
NSC file Parser,0x00600000,1,1,wmpasf.dll,9.00.0000.2980
XviD MPEG-4 Video Decoder,0xff800000,1,1,xvid.ax,
File Source (Monkey Audio),0x00400000,0,1,MonkeySource.ax,
3ivx D4 Audio Decoder,0x00600000,1,1,3ivxDSAudioDecoder.ax,4.05.0001.0030
ACM Wrapper,0x00600000,1,1,quartz.dll,6.05.0001.0907
Windows Media source filter,0x00600000,0,2,wmpasf.dll,9.00.0000.2980
Video Renderer,0x00800001,1,0,quartz.dll,6.05.0001.0907
Nero DVD Navigator,0x00600000,0,4,NeDVD.ax,2.01.0001.0039
Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.05.0001.0904
Video Port Manager,0x00600000,2,1,quartz.dll,6.05.0001.0907
WST Decoder,0x00600000,1,1,wstdecod.dll,5.03.0000.0900
Video Renderer,0x00400000,1,0,quartz.dll,6.05.0001.0907
Nero Audio Sample Renderer,0x00200000,1,0,NeRender.ax,1.00.0001.0008
Nero Vcd Navigator,0x00600000,0,2,NeVcd.ax,1.02.0000.0020
DivX Decoder Filter,0xff800000,1,1,divxdec.ax,5.02.0001.1335
Nero Audio Processor,0x00200000,1,1,NeAudioConv.ax,1.01.0000.0008
WM ASF Writer,0x00400000,0,0,qasf.dll,9.00.0000.2980
CoreCodec WPW,0x00200000,1,1,wawrap.cll,8.00.0000.0000
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,5.00.2157.0001
Nero Video Stream Renderer,0x00200000,1,0,NeRender.ax,1.00.0001.0008
File writer,0x00200000,1,0,qcap.dll,6.05.0001.0900
RadLight MPC DirectShow Filter,0x00600000,0,1,MPCDec.ax,1.00.0000.0003
Vorbis Encoder,0x00200000,1,1,OggDS.dll,0.09.0009.0005
Ogg Multiplexer,0x00400000,1,1,OggDS.dll,0.09.0009.0005
DirectVobSub,0x00200000,2,1,vsfilter.dll,1.00.0001.0002
RIFF/CDXA Source,0x00400000,0,1,xcdsrc.ax,8.01.0000.0000
DirectVobSub (auto-loading version),0x00800002,2,1,vsfilter.dll,1.00.0001.0002
ffdshow VFW decoder helper,0x00200000,2,1,ffdshow.ax,1.00.0002.0024
DVD Navigator,0x00200000,0,2,qdvd.dll,6.05.0001.0904
Overlay Mixer2,0x00400000,1,1,qdvd.dll,6.05.0001.0904
Haali Matroska Muxer,0x00200000,1,0,splitter.ax,
Cutlist File Source,0x00200000,0,1,qcut.dll,6.01.0009.0726
AC3Filter,0x40000000,1,1,ac3filter.ax,1.00.0001.0000
AVI Draw,0x00600064,9,1,quartz.dll,6.05.0001.0907
.RAM file Parser,0x00600000,1,0,wmpasf.dll,9.00.0000.2980
Nero File Source / Splitter,0x00600000,0,3,NeFSource.ax,1.00.0004.0004
Nero Digital Audio Encoder,0x00200000,1,2,NeNDAud.ax,2.00.0000.0008
G.711 Codec,0x00200000,1,1,g711codc.ax,5.00.2143.0001
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.05.0001.0900
DV Video Decoder,0x00800000,1,1,qdv.dll,6.05.0001.0904
Indeo® audio software,0x00500000,1,1,iac25_32.ax,2.00.0005.0053
Windows Media Update Filter,0x00400000,1,0,wmpasf.dll,9.00.0000.2980
ffdshow Audio Processor,0x00200000,1,1,ffdshow.ax,1.00.0002.0024
CoreCodec CDDA Source,0x00600000,0,1,cddasource.cll,0.08.0000.0104
ASF DIB Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.2980
ASF ACM Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.2980
ASF ICM Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.2980
ASF URL Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.2980
ASF JPEG Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.2980
ASF DJPEG Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.2980
ASF embedded stuff Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.2980
Nero Video Processor,0x00200000,1,1,NeroVideoProc.ax,1.00.0000.0071
Nero Video Decoder,0x00600000,2,2,NeVideo.ax,2.00.0002.0026
SampleGrabber,0x00200000,1,1,qedit.dll,6.05.0001.0900
Null Renderer,0x00200000,1,0,qedit.dll,6.05.0001.0900
VP7 Decompressor,0x00800000,1,1,vp7dec.ax,7.00.0008.0000
MPEG-2 Sections and Tables,0x005fffff,1,0,mpeg2data.ax,6.05.0001.0900
IVF source filter,0x00600000,0,1,ivfsrc.ax,5.10.0002.0051
H263 Encode Filter,0x00200000,1,1,h263_32.ax,5.00.2195.6611
Smart Tee,0x00200000,1,2,qcap.dll,6.05.0001.0900
Overlay Mixer,0x00200000,0,0,qdvd.dll,6.05.0001.0904
Nero Scene Detector,0x00200000,1,0,NeSceneDetector.ax,1.00.0000.0007
Microsoft PCM Audio Mixer,0x00200000,1,1,dxmrtp.dll,5.00.2195.6611
RealPlayer Audio Filter,0x00200000,1,1,rdsf3260.dll,6.00.0012.1208
AVI Decompressor,0x00600000,1,1,quartz.dll,6.05.0001.0907
CoreCodec Subtitles Dispatcher,0x00200000,1,0,subdispatch.cll,1.00.0000.0003
AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.05.0001.0907
Intel RTP RPH for G.711/G.723.1,0x00200000,1,1,dxmrtp.dll,5.00.2195.6611
QuickTime Movie Parser,0x00600000,1,1,quartz.dll,6.05.0001.0907
Wave Parser,0x00400000,1,1,quartz.dll,6.05.0001.0907
MIDI Parser,0x00400000,1,1,quartz.dll,6.05.0001.0907
Multi-file Parser,0x00400000,1,1,quartz.dll,6.05.0001.0907
Lyric Parser,0x00400000,1,1,quartz.dll,6.05.0001.0907
File stream renderer,0x00400000,1,1,quartz.dll,6.05.0001.0907
XML Playlist,0x00400000,1,0,wmpasf.dll,9.00.0000.2980
Nero File Source,0x00200000,0,1,NeFileSrc.ax,1.00.0000.0006
Nero QuickTime(tm) Audio Decoder,0x00400000,1,1,NeQTDec.ax,1.00.0000.0004
WavPack Audio Splitter,0x00600000,1,1,WavPackDSSplitter.ax,1.00.0003.0277
Nero DVD Decoder,0x00600000,2,2,NeVideo.ax,2.00.0002.0026
Nero Digital Parser,0x00600000,0,3,NDParser.ax,2.00.0002.0034
AVI Mux,0x00200000,1,0,qcap.dll,6.05.0001.0900
CyberLink QuickTime Source Filter,0x00200000,0,2,QuickTime.ax,1.00.0000.1016
Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.05.0001.0907
File Source (Async.),0x00400000,0,1,quartz.dll,6.05.0001.0907
File Source (URL),0x00400000,0,1,quartz.dll,6.05.0001.0907
Nero Frame Capture,0x00200000,1,1,NeCapture.ax,1.04.0000.0009
Intel RTP SPH for H.263/H.261,0x00200000,1,1,dxmrtp.dll,5.00.2195.6611
Intel RTP RPH for H.263/H.261,0x00200000,1,1,dxmrtp.dll,5.00.2195.6611
Intel RTP RPH for Generic Audio,0x00200000,1,1,dxmrtp.dll,5.00.2195.6611
H261 Encode Filter,0x00200000,1,1,h261_32.ax,5.00.2195.6611
Ogg Splitter,0x00600000,1,1,OggDS.dll,0.09.0009.0005
Nero Video Sample Renderer,0x00200000,1,0,NeRender.ax,1.00.0001.0008
Nero Digital Video Encoder,0x00200000,1,2,NeNDVid.ax,2.00.0000.0008
Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.05.0001.0900
BDA MPEG2 Transport Information Filter,0x00200000,1,0,psisrndr.ax,6.05.0001.0900
QT Decompressor,0x00600000,1,1,quartz.dll,6.05.0001.0907
MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.05.0001.0907
Indeo® video 4.4 Decompression Filter,0x00640000,1,1,ir41_32.ax,4.51.0016.0003
Indeo® video 4.4 Compression Filter,0x00200000,1,1,ir41_32.ax,4.51.0016.0003
WDM Streaming Tee/Splitter Devices:
Tee/Sink-to-Sink Converter,0x00200000,1,1,,5.03.0000.0900
WDM Streaming Data Transforms:
Microsoft Kernel GS Wavetable Synthesizer,0x00200000,1,1,,5.03.0000.0900
Microsoft DirectMusic SW Synth (WDM),0x00200000,1,1,,5.03.0000.0900
Video Compressors:
WMVideo9 Encoder DMO,0x00600800,1,1,,
MSScreen 9 encoder DMO,0x00600800,1,1,,
3ivx D4 Video Encoder,0x00100000,1,1,3ivxDSEncoder.ax,4.05.0001.0030
DV Video Encoder,0x00200000,0,0,qdv.dll,6.05.0001.0904
ffdshow video encoder,0x00100000,1,1,ffdshow.ax,1.00.0002.0024
Indeo® video 5.10 Compression Filter,0x00100000,1,1,ir50_32.dll,5.2562.0015.0055
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.05.0001.0907
Nero Digital Video Encoder,0x00200000,1,2,NeNDVid.ax,2.00.0000.0008
3ivx D4 4.5.1 Pro Video Codec,0x00200000,1,1,qcap.dll,6.05.0001.0900
Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.05.0001.0900
DivX® 5.2.1 Codec,0x00200000,1,1,qcap.dll,6.05.0001.0900
ffdshow Video Codec,0x00200000,1,1,qcap.dll,6.05.0001.0900
Intel 4:2:0 Video V2.50,0x00200000,1,1,qcap.dll,6.05.0001.0900
Intel Indeo(R) Video R3.2,0x00200000,1,1,qcap.dll,6.05.0001.0900
Intel Indeo® Video 4.5,0x00200000,1,1,qcap.dll,6.05.0001.0900
Indeo® video 5.10,0x00200000,1,1,qcap.dll,6.05.0001.0900
Microsoft H.261 Video Codec,0x00200000,1,1,qcap.dll,6.05.0001.0900
Microsoft H.263 Video Codec,0x00200000,1,1,qcap.dll,6.05.0001.0900
Microsoft MPEG-4 Video Codec V2,0x00200000,1,1,qcap.dll,6.05.0001.0900
Microsoft MPEG-4 Video Codec V3,0x00200000,1,1,qcap.dll,6.05.0001.0900
Microsoft MPEG-4 Video Codec V1,0x00200000,1,1,qcap.dll,6.05.0001.0900
Microsoft RLE,0x00200000,1,1,qcap.dll,6.05.0001.0900
Microsoft Video 1,0x00200000,1,1,qcap.dll,6.05.0001.0900
VP310x00200000,1,1,qcap.dll,6.05.0001.0900
VP60® Simple Profile ,0x00200000,1,1,qcap.dll,6.05.0001.0900
VP61® Advanced Profile,0x00200000,1,1,qcap.dll,6.05.0001.0900
VP62® Heightened Sharpness Profile,0x00200000,1,1,qcap.dll,6.05.0001.0900
VP70® General Profile,0x00200000,1,1,qcap.dll,6.05.0001.0900
Microsoft Windows Media Video 9,0x00200000,1,1,qcap.dll,6.05.0001.0900
XviD MPEG-4 Codec,0x00200000,1,1,qcap.dll,6.05.0001.0900
Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,,
WMAudio Encoder DMO,0x00600800,1,1,,
Indeo® audio software,0x00500000,1,1,iac25_32.ax,2.00.0005.0053
Vorbis Encoder,0x00200000,1,1,OggDS.dll,0.09.0009.0005
Nero Audio Encoder,0x00200000,1,1,NeAudioEnc.ax,1.00.0000.0004
IAC2,0x00200000,1,1,quartz.dll,6.05.0001.0907
Lernout & Hauspie CELP 4.8kbit/s,0x00200000,1,1,quartz.dll,6.05.0001.0907
Lernout & Hauspie SBC 8kbit/s,0x00200000,1,1,quartz.dll,6.05.0001.0907
Lernout & Hauspie SBC 12kbit/s,0x00200000,1,1,quartz.dll,6.05.0001.0907
Lernout & Hauspie SBC 16kbit/s,0x00200000,1,1,quartz.dll,6.05.0001.0907
ffdshow Audio Decoder,0x00200000,1,1,quartz.dll,6.05.0001.0907
IMA ADPCM,0x00200000,1,1,quartz.dll,6.05.0001.0907
PCM,0x00200000,1,1,quartz.dll,6.05.0001.0907
Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.05.0001.0907
DSP Group TrueSpeech(TM),0x00200000,1,1,quartz.dll,6.05.0001.0907
GSM 6.10,0x00200000,1,1,quartz.dll,6.05.0001.0907
Microsoft G.723.1,0x00200000,1,1,quartz.dll,6.05.0001.0907
CCITT A-Law,0x00200000,1,1,quartz.dll,6.05.0001.0907
CCITT u-Law,0x00200000,1,1,quartz.dll,6.05.0001.0907
AC-3 ACM Decompressor,0x00200000,1,1,quartz.dll,6.05.0001.0907
MPEG Layer-3,0x00200000,1,1,quartz.dll,6.05.0001.0907
Audio Capture Sources:
Realtek AC97 Audio,0x00200000,0,0,qcap.dll,6.05.0001.0900
3ivx Filters:
3ivx D4 Audio Decoder,0x00600000,1,1,3ivxDSAudioDecoder.ax,4.05.0001.0030
3ivx D4 Media Muxer,0x00200000,1,1,3ivxDSMediaMux.ax,4.05.0001.0030
3ivx D4 Media Splitter,0x00800000,1,1,3ivxDSMediaSplitter.ax,4.05.0001.0030
3ivx D4 Video Decoder,0x00800000,1,1,3ivxDSDecoder.ax,4.05.0001.0030
3ivx D4 Video Encoder,0x00100000,1,1,3ivxDSEncoder.ax,4.05.0001.0030
Midi Renderers:
Default MidiOut Device,0x00800000,1,0,quartz.dll,6.05.0001.0907
Microsoft GS Wavetable SW Synth,0x00200000,1,0,quartz.dll,6.05.0001.0907
WDM Streaming Capture Devices:
Realtek AC97 Audio,0x00200000,3,3,,5.03.0000.0900
Raw Channel Access Capture/Render,0x00200000,1,1,,5.03.0000.0900
WDM Streaming Rendering Devices:
Realtek AC97 Audio,0x00200000,3,3,,5.03.0000.0900
Raw Channel Access Capture/Render,0x00200000,1,1,,5.03.0000.0900
BDA Rendering Filters:
BDA IP Sink,0x00200000,1,1,,5.03.0000.0900
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,1,msdvbnp.ax,6.05.0001.0900
Microsoft DVBC Network Provider,0x00200000,0,1,msdvbnp.ax,6.05.0001.0900
Microsoft DVBS Network Provider,0x00200000,0,1,msdvbnp.ax,6.05.0001.0900
Microsoft DVBT Network Provider,0x00200000,0,1,msdvbnp.ax,6.05.0001.0900
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,1,0,psisrndr.ax,6.05.0001.0900
MPEG-2 Sections and Tables,0x00600000,1,0,mpeg2data.ax,6.05.0001.0900
WDM Streaming Mixer Devices:
Microsoft Kernel Audio Mixer,0x00200000,2,2,,5.03.0000.0900
WDM Streaming Communication Transforms:
Tee/Sink-to-Sink Converter,0x00200000,1,1,,5.03.0000.0900
Audio Renderers:
Realtek AC97 Audio,0x00200000,1,0,quartz.dll,6.05.0001.0907
Default DirectSound Device,0x00800000,1,0,quartz.dll,6.05.0001.0907
Default WaveOut Device,0x00200000,1,0,quartz.dll,6.05.0001.0907
DirectSound: Realtek AC97 Audio,0x00200000,1,0,quartz.dll,6.05.0001.0907
WDM Streaming System Devices:
Realtek AC97 Audio,0x00200000,14,2,,5.03.0000.0900
BDA Receiver Components:
BDA Slip De-Framer,0x00600000,1,1,,5.03.0000.0900
BDA MPE Filter,0x00600000,1,1,,5.03.0000.0900
Similar Messages
-
Analysis could not be performed in time. There is a possible serious performance issue
Can someone please advise what I need to do to correct this critical error?
My computer is VERY slow and when I ran the event viewer, this is listed as CRITICAL. Any information would be appreciated.
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 6/24/2010 10:18:46 AM
Event ID: 400
Task Category: System Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: user-PC
Description:
Information about the system performance monitoring event:
Scenario : System Responsiveness
Analysis result : Analysis could not be performed in time. There is a possible serious performance issue
Incident Time (UTC) : 6/24/2010 5:17:07 PM
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Diagnostics-Performance" Guid="{cfc18ec0-96b1-4eba-961b-622caee05b0a}" />
<EventID>400</EventID>
<Version>1</Version>
<Level>1</Level>
<Task>4005</Task>
<Opcode>37</Opcode>
<Keywords>0x8000000000010000</Keywords>
<TimeCreated SystemTime="2010-06-24T17:18:46.941Z" />
<EventRecordID>5491</EventRecordID>
<Correlation ActivityID="{00000000-E6C8-0000-F4BB-058D9113CB01}" />
<Execution ProcessID="1884" ThreadID="5956" />
<Channel>Microsoft-Windows-Diagnostics-Performance/Operational</Channel>
<Computer>user-PC</Computer>
<Security UserID="S-1-5-19" />
</System>
<EventData>
<Data Name="ShellScenarioStartTime">2010-06-24T17:17:07.442Z</Data>
<Data Name="ShellScenarioEndTime">2010-06-24T17:17:12.442Z</Data>
<Data Name="ShellSubScenario">1</Data>
<Data Name="ShellScenarioDuration">5000</Data>
<Data Name="ShellRootCauseBits">0</Data>
<Data Name="ShellAnalysisResult">2</Data>
<Data Name="ShellDegradationType">1</Data>
<Data Name="ShellTsVersion">1</Data>
<Data Name="ShellMachineUpTimeHours">0</Data>
<Data Name="ShellMachineSleepPattern">0</Data>
</EventData>
</Event>I do get the same problem. It believe it started after I switched from HDD to SSD some month's ago. My machine is very fast now so I do not have performance problems (only a very slow power on boot).
The description above is exactly the same as I have.
Does somebody has the same problems? -
Serious Performance issue in ADF?
Hi Everyone,
My Jdev version is 11.1.2.3.0.
I have developed one ADF application and deployed into web logic server.
I am accessing this page through url in one portal of client.
After clicking on the page link in portal it opens the page and the page has search page(test field, submitbutton and result table).
On clicking on submit button sometimes the result in the table comes in few seconds and sometimes it takes few minutes.
its a very serious performance issue.
What should i do to increase performance for my ADF page?
why it takes much time sometimes?
Please give suggestions.
Thanks.Hi Kumar,
Try to ensure proper indexes are placed based on search criteria in base table which will definitely increase the performance. Be sure to check the explain plan to see the performance of query instead of just running it in toad. If you feel everything is good from back end, you can tune your view object, go to view object editor->tuning and set the page range size=25 or some smaller value and see if that increases the performance.
Refer below link for more guidelines:
http://docs.oracle.com/cd/E17904_01/core.1111/e10108/adf.htm
Regards,
Ravi Nuka -
ABAP performance issues and improvements
Hi All,
Pl. give me the ABAP performance issue and improvement points.
Regards,
HemaPerformance tuning for Data Selection Statement
For all entries
The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of
entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the
length of the WHERE clause.
The plus
Large amount of data
Mixing processing and reading of data
Fast internal reprocessing of data
Fast
The Minus
Difficult to program/understand
Memory could be critical (use FREE or PACKAGE size)
Some steps that might make FOR ALL ENTRIES more efficient:
Removing duplicates from the the driver table
Sorting the driver table
If possible, convert the data in the driver table to ranges so a BETWEEN statement is used instead of and OR statement:
FOR ALL ENTRIES IN i_tab
WHERE mykey >= i_tab-low and
mykey <= i_tab-high.
Nested selects
The plus:
Small amount of data
Mixing processing and reading of data
Easy to code - and understand
The minus:
Large amount of data
when mixed processing isnt needed
Performance killer no. 1
Select using JOINS
The plus
Very large amount of data
Similar to Nested selects - when the accesses are planned by the programmer
In some cases the fastest
Not so memory critical
The minus
Very difficult to program/understand
Mixing processing and reading of data not possible
Use the selection criteria
SELECT * FROM SBOOK.
CHECK: SBOOK-CARRID = 'LH' AND
SBOOK-CONNID = '0400'.
ENDSELECT.
SELECT * FROM SBOOK
WHERE CARRID = 'LH' AND
CONNID = '0400'.
ENDSELECT.
Use the aggregated functions
C4A = '000'.
SELECT * FROM T100
WHERE SPRSL = 'D' AND
ARBGB = '00'.
CHECK: T100-MSGNR > C4A.
C4A = T100-MSGNR.
ENDSELECT.
SELECT MAX( MSGNR ) FROM T100 INTO C4A
WHERE SPRSL = 'D' AND
ARBGB = '00'.
Select with view
SELECT * FROM DD01L
WHERE DOMNAME LIKE 'CHAR%'
AND AS4LOCAL = 'A'.
SELECT SINGLE * FROM DD01T
WHERE DOMNAME = DD01L-DOMNAME
AND AS4LOCAL = 'A'
AND AS4VERS = DD01L-AS4VERS
AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
SELECT * FROM DD01V
WHERE DOMNAME LIKE 'CHAR%'
AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
Select with index support
SELECT * FROM T100
WHERE ARBGB = '00'
AND MSGNR = '999'.
ENDSELECT.
SELECT * FROM T002.
SELECT * FROM T100
WHERE SPRSL = T002-SPRAS
AND ARBGB = '00'
AND MSGNR = '999'.
ENDSELECT.
ENDSELECT.
Select Into table
REFRESH X006.
SELECT * FROM T006 INTO X006.
APPEND X006.
ENDSELECT
SELECT * FROM T006 INTO TABLE X006.
Select with selection list
SELECT * FROM DD01L
WHERE DOMNAME LIKE 'CHAR%'
AND AS4LOCAL = 'A'.
ENDSELECT
SELECT DOMNAME FROM DD01L
INTO DD01L-DOMNAME
WHERE DOMNAME LIKE 'CHAR%'
AND AS4LOCAL = 'A'.
ENDSELECT
Key access to multiple lines
LOOP AT TAB.
CHECK TAB-K = KVAL.
ENDLOOP.
LOOP AT TAB WHERE K = KVAL.
ENDLOOP.
Copying internal tables
REFRESH TAB_DEST.
LOOP AT TAB_SRC INTO TAB_DEST.
APPEND TAB_DEST.
ENDLOOP.
TAB_DEST[] = TAB_SRC[].
Modifying a set of lines
LOOP AT TAB.
IF TAB-FLAG IS INITIAL.
TAB-FLAG = 'X'.
ENDIF.
MODIFY TAB.
ENDLOOP.
TAB-FLAG = 'X'.
MODIFY TAB TRANSPORTING FLAG
WHERE FLAG IS INITIAL.
Deleting a sequence of lines
DO 101 TIMES.
DELETE TAB_DEST INDEX 450.
ENDDO.
DELETE TAB_DEST FROM 450 TO 550.
Linear search vs. binary
READ TABLE TAB WITH KEY K = 'X'.
READ TABLE TAB WITH KEY K = 'X' BINARY SEARCH.
Comparison of internal tables
DESCRIBE TABLE: TAB1 LINES L1,
TAB2 LINES L2.
IF L1 <> L2.
TAB_DIFFERENT = 'X'.
ELSE.
TAB_DIFFERENT = SPACE.
LOOP AT TAB1.
READ TABLE TAB2 INDEX SY-TABIX.
IF TAB1 <> TAB2.
TAB_DIFFERENT = 'X'. EXIT.
ENDIF.
ENDLOOP.
ENDIF.
IF TAB_DIFFERENT = SPACE.
ENDIF.
IF TAB1[] = TAB2[].
ENDIF.
Modify selected components
LOOP AT TAB.
TAB-DATE = SY-DATUM.
MODIFY TAB.
ENDLOOP.
WA-DATE = SY-DATUM.
LOOP AT TAB.
MODIFY TAB FROM WA TRANSPORTING DATE.
ENDLOOP.
Appending two internal tables
LOOP AT TAB_SRC.
APPEND TAB_SRC TO TAB_DEST.
ENDLOOP
APPEND LINES OF TAB_SRC TO TAB_DEST.
Deleting a set of lines
LOOP AT TAB_DEST WHERE K = KVAL.
DELETE TAB_DEST.
ENDLOOP
DELETE TAB_DEST WHERE K = KVAL.
Tools available in SAP to pin-point a performance problem
The runtime analysis (SE30)
SQL Trace (ST05)
Tips and Tricks tool
The performance database
Optimizing the load of the database
Using table buffering
Using buffered tables improves the performance considerably. Note that in some cases a stament can not be used with a buffered table, so when using these staments the buffer will be bypassed. These staments are:
Select DISTINCT
ORDER BY / GROUP BY / HAVING clause
Any WHERE clasuse that contains a subquery or IS NULL expression
JOIN s
A SELECT... FOR UPDATE
If you wnat to explicitly bypass the bufer, use the BYPASS BUFFER addition to the SELECT clause.
Use the ABAP SORT Clause Instead of ORDER BY
The ORDER BY clause is executed on the database server while the ABAP SORT statement is executed on the application server. The datbase server will usually be the bottleneck, so sometimes it is better to move thje sort from the datsbase server to the application server.
If you are not sorting by the primary key ( E.g. using the ORDER BY PRIMARY key statement) but are sorting by another key, it could be better to use the ABAP SORT stament to sort the data in an internal table. Note however that for very large result sets it might not be a feasible solution and you would want to let the datbase server sort it.
Avoid ther SELECT DISTINCT Statement
As with the ORDER BY clause it could be better to avoid using SELECT DISTINCT, if some of the fields are not part of an index. Instead use ABAP SORT + DELETE ADJACENT DUPLICATES on an internal table, to delete duplciate rows. -
Performance issue and data getting interchanged in BO Webi report + SAP BW
Hi,
We are using SAP BW queries as the source for creating some BO reports.
Environments :
SAP - SAP BI 7.1
BO - BO XI 3.1
Issues :
The reports were working fine in Dev and Q with less data. But when we point the universes to BW prod ( where we have much data), the reports are taking quite a long time to refresh and getting timed out. This query has some key figures which are having customer exits defined to show only one month data. And also BW accelerators are updated for the infocubes pertaining to this query. The BO report is giving data if we apply a filter in 'Query Panel' of Webi to show only current month dates. But then the issue is the values are getting interchanged for many objects. For ex: there are 2 objects- ABS version and Market region. The values are getting interchanged in the BO level.
Please let us know if anything needs to be done in BO or BW to fix this issue if anyone has faced the same
Also Please let us know if customer exits and accelerators works fine with BO
Thanks
SivakamiHi,
Thanks Roberto. We'll check the notes
@Ingo,
We are able to solve the performance issue by removing unused Key figures and dimensions from the query, but the column value interchange issue still persisits
The build version is - 12.3.0
Query Stripping
Where should we enable query stripping? When i went through some documentation it was written that it'll be enabled automatically from XI 3.1 Sp3. Can you please let us know if its so and what we need to do to enable it.
The coulmn interchange is happening when we use dimensions in a certain order. When product type is used along with Market region. Market region shows values of Product type also in Webi report.
Thanks & Regards,
Sivakami -
After Effects CS5.5 - Very Serious Performance Issues w/RAM Preview
My system: Windows 7 Professional, two Intel Xeon X5650's, 12GB RAM, and a NVIDIA Quadro FX 4800.
Problem: RAM Preview in CS5.5 gives me less than 2 fps (yes---two frames per second). This is even with the most simple of compositions. I created a 1080p 23.976 project with two simple solid layers and keyframed position and scale values for one of them with no other effects on either solid. RAM Preview gives me 1.8 fps.
I still have AE CS5 installed and it gives me solid, predictable results with RAM Preview. When I create a similar test project inside CS5, it creates the RAM preview almost instantly and displays in proper realtime (23.976 fps).
My settings for both CS5 and CS5.5 are similar (and I have tried many variations in my attempt to fix this problem).
PREVIEWS
Fast Previews: Adaptive Resolution Limit 1/4
Enabled OpenGL and both sub-options for OpenGL enabled.
MEMORY & MULTIPROCESSING
RAM reserved for other apps: 4GB
I have tried various settings for Multiprocessing, all of which results in the same less-than-2 fps RAM Previews. Currently I have MP'ing enabled with 1.5GB allocation per background CPU and the actual CPU's used is 4. Again, no matter what I set it to, I get the same performance issue.
On my screen magnification ratio setting, I am using 25% and my Resolution/Down Sample is set to quarter. On my preview tab, I have tried setting my resolution from the default of "Auto" to "Quarter" with no difference.
In summary: On the same machine, AE CS5.5 RAM Preview offers terrible performance; CS5 RAM Preview offers great performance.Under AJA Preview there are check boxes, one for "Video" and the other for "Preview." I've checked and unchecked them both and I'm still getting poor RAM previews. No matter what I have toggled, I seem to get between 1 and 2 fps for my RAM Previews.
I am not currently using the AJA card for anything. I will consider uninstalling it if this might possibly solve my problem. It's just a hassle to install and uninstall cards on a per need basis.
If there are any other thoughts, I'd love to hear them. At this point, I'd do just about anything to have realtime previews back.
The machine I'm using, by the way, is an HP z800 with Windows 7 Professional, two Intel Xeon X5650's, 12GB RAM, and a NVIDIA Quadro FX 4800. It has the following installed: CS5.5 Production Premium, AVID Media Composer 5.5.2, and AVID DS 10.5.1 (among other programs). -
I am having serious performance issues. FF just spins and spins, and rarely gets anywhere anymore.
I have disabled addons, uninstalled/reinstalled, all to no avail. Other browsers work fine for me. I'm at the point where I'm ready to give up on FF and just go to Chrome fulltime, if I can't get an answer to this issue.
I do use quite a few tabs, but I haven't had an issue with that in the past. This issue started a couple months ago, so I went through the various releases, and am now at 7.01 in W7 64, still the same issues as when it started in FF4.
I do NOT have this problem in XP using the same browser version on another machine.Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
Also, try the steps at http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals -
Serious performance issues with no solution in sight
I hate to be in such desperate need of help, but these forums have been extraordinarily helpful before, so I'm hoping someone will be able to help me with this series of problems.
I honestly don't know how to describe the problem beyond that it seems like the computer is coming apart.
The problem started about a week and a half, maybe two weeks, ago. I was having problems with Safari at first. Every time I used it, I would get the spinning ball, and it would take several minutes to open. If Safari was opened, the computer seemed to just lock up. No other applications could be opened, and no folders could be used. On top of that, whenever that spinning ball appeared, a series of clicking sounds could be heard coming from the upper left hand portion of the laptop (not the screen). The only way I could make it stop was to force quit (and even that was a luck of the draw issue).
I took the computer in to be checked out, but their scans and tests showed the same results as mine: nothing is wrong. The problem has since spread beyond Safari, which I ended up erasing from my computer. That same rhythmic clicking happens whenever the spinning ball appears. I have tried to find some kind of pattern to the sound/spinning ball, but have thus far been unsuccessful.
It has happened when using iTunes, saving with appleworks, having AOL instant messenger open, using Firefox, using quicktime. Whenever it happens, my system basically locks up and renders all applications useless. Force quitting is the only way I can get things going again, and even then it can take several minutes for me to even be able to force quit.
Also, software updates quit before I can download them.
I apologize for the long post, but I want to try and provide as much information as possible.
To me this sounds like a failing hard drive, and that is what the tech thought, but the tests just show nothing is wrong, and I cannot comprehend why.
My many thanks in advance for any help you can provide.Hi Samuel,
I will agree that louder than normal clicking is a sign of something wrong with the hard drive. But you might just be hearing the hard drive working normally, it just might be doing it a lot more.
If you haven't tried a permissions repair, try one. It's worth a try, and I have known it to improve the performance of my Macs to some extent.
Also, if you have access to it, Try DiskWarrior. DiskWarrior is a program that will take your hard drive and rebuild the directory for it, clearing up errors and improving overall performance.
If you've got the means to do this, try reformatting your system. It's a lot of work, I'll admit, but perhaps something got corrupted and it could be messing up your performance.
Another thing you can try is to boot OS X from some sort of external hard drive (if you happen to have a friend who happens to own an external hard drive with OS X on it... wait, am I the only one??? darn.) and see if the problem exists when running off the other drive. If you don't happen to have such a hard drive (I mean, everyone's got a spare external hard drive with OS X installed on it, don't they?) you can simply boot a friend's Mac in FireWire target disk mode (boot the computer while holding T key), connect the 2 computers, and boot your system from the friend's hard drive (by holding the option key at startup). Of course, if none of your friends own Macs, you need to find better friends!
Basically, though, if your computer successfully boots from one of these other systems and doesn't exhibit these symptoms, then it's something with your hard drive. Try first to reformat (or at least re-install OS X), and if that doesn't work, you'll have to do a repair.
If you have to resort to calling tech support, I'll bet you $10,000 that they're going to ask you to reset the PMU and/or the PRAM on your system. Your computer could have dirt on it, and they'd have you reset the PRAM and the PMU. -
Performance issue and functional question regarding updates on tables
A person at my site wrote some code to update a custom field on the MARC table that was being copied from the MARA table. Here is what I would have expected to see as the code. Assume that both sets of code have a parameter called p_werks which is the plant in question.
data : commit_count type i.
select matnr zfield from mara into (wa_marc-matnr, wa_marc-zfield).
update marc set zfield = wa_marc-zfield
where werks = p_werks and matnr = wa_matnr.
commit work and wait.
endselect.
I would have committed every 200 rows instead of every one row, but here's the actual code and my question isn't around the commits but something else. In this case an internal table was built with two elements - MATNR and WERKS - could have done that above too, but that's not my question.
DO.
" Lock the record that needs to be update with material creation date
CALL FUNCTION 'ENQUEUE_EMMARCS'
EXPORTING
mode_marc = 'S'
mandt = sy-mandt
matnr = wa_marc-matnr
werks = wa_marc-werks
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc <> 0.
" Wait, if the records not able to perform as lock
CALL FUNCTION 'RZL_SLEEP'.
ELSE.
EXIT.
ENDIF.
ENDDO.
" Update the record in the table MARC with material creation date
UPDATE marc SET zzdate = wa_mara-zzdate
WHERE matnr = wa_mara-matnr AND
werks = wa_marc-werks. " IN s_werks.
IF sy-subrc EQ 0.
" Save record in the database table MARC
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'
IMPORTING
return = wa_return.
wa_log-matnr = wa_marc-matnr.
wa_log-werks = wa_marc-werks.
wa_log-type = 'S'.
" text-010 - 'Material creation date has updated'.
wa_log-message = text-010.
wa_log-zzdate = wa_mara-zzdate.
APPEND wa_log TO tb_log.
CLEAR: wa_return,wa_log.
ELSE.
" Roll back the record(un save), if there is any issue occurs
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
IMPORTING
return = wa_return.
wa_log-matnr = wa_marc-matnr.
wa_log-werks = wa_marc-werks.
wa_log-type = 'E'.
" 'Material creation date does not updated'.
wa_log-message = text-011.
wa_log-zzdate = wa_mara-zzdate..
APPEND wa_log TO tb_log.
CLEAR: wa_return, wa_log.
ENDIF.
" Unlock the record from data base
CALL FUNCTION 'DEQUEUE_EMMARCS'
EXPORTING
mode_marc = 'S'
mandt = sy-mandt
matnr = wa_marc-matnr
werks = wa_marc-werks.
ENDIF.
Here's the question - why did this person enqueue and dequeue explicit locks like this ? They claimed it was to prevent issues - what issues ??? Is there something special about updating tables that we don't know about ? We've actually seen it where the system runs out of these ENQUEUE locks.
Before you all go off the deep end and ask why not just do the update, keep in mind that you don't want to update a million + rows and then do a commit either - that locks up the entire table!The ENQUEUE lock insure that another program called by another user will not update the data at the same time, so preventing database coherence to be lost. In fact, another user on a SAP correct transaction, has read the record and locked it, so when it will be updated your modifications will be lost, also you could override modifications made by another user in another luw.
You cannot use a COMMIT WORK in a SELECT - ENDSELECT, because COMMIT WORK will close each and every opened database cursor, so your first idea would dump after the first update. (so the internal table is mandatory)
Go through some documentation like [Updates in the R/3 System (BC-CST-UP)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTUP/BCCSTUP_PT.pdf]
Regards -
Serious performance issue with LV 7.1 Development Environment
I'm posting this issue to the forums prior to submitting a bug report to ensure that the problems I'm having are reproducible. To reproduce this bug, you're going to have to be an advanced user with a large project (hundreds to thousands of VIs) as the performance problem is related to the number of VIs loaded.
The issue is the increasingly poor performance of the LabVIEW 7.1 Development Environment as the number of VIs in memory increases. The actions affected include switching between front panel and diagram, saving a VI, copy and paste, clicking a menu, and the mysterious time spent (compiling? editing the runtime menu? changing the toolbar state?) between pressing the run button and when the code actually starts executing. Scrolling and, interestingly, copying via a control-drag are not affected. Running time of entirely on-diagram code does not seem to be affected.
These problems are quite severe and significantly decrease my productivity as a programmer. Since they are development environment UI issues, it's been difficult for me to find a good example VI; the best I can do is the attached "LV Speed Test.vi". It doesn't test the issues that affect me most, but it seems to suffer from the same problem.
This simple VI just shows and hides the menu bar 100 times in a tight for loop. When it is the only VI loaded, it executes in about 350 msec on my machine. (2.4 GHz P-IV/640 MB RAM/Win2k). However, when I load a single project-encompassing VI (let's call it the "giant") that references a total of about 900 user and VI-lib subVIs, the test routine takes almost a minute and half to run...about 240 times slower! I've tried this on my laptop with similar results.
The problem appears to be related to the *number* of VIs loaded and not the memory utilization. For example, if I close the "giant", and create a new VI ("memhog") that does nothing but initialize a length 20,000,000 array of doubles and stores it in an uninitialized shift register, LabView's overall memory usage (as shown in the task manager) jumps enormously, but LV Speed Test executes in about 450 msec...only slightly slower than with a fresh copy of Labview.
The problem seems to be related to excessive context switching. The Windows task manager shows over a thirteen hundred page faults occur when "LV Speed Test" is run with the "giant" in the background, versus zero or none when run by itself or when "memhog" has used up 160+MB of space.
The problem only seems to affect the frontmost window. (Unfortunately, that's where we LV programmers spend all of our time!) If you start "LV Speed Test" and then put "giant" in the foreground "LV Speed Test" runs much faster. In fact, if you use the VI server to put the "giant" VI in the foreground programmatically at the start of "LV Speed Test", execution time drops back to 450 msec, and there are no page faults!
These results show the issue is not related to video drivers or the Windows virtual memory system. My suspicion is that there is a faulty routine in LV 7.1 that is traversing the entire VI hierarchy every time certain events are thrown in the foreground window. It could be due to a problem with the Windows event tracking system, but this seems less likely.
I have been programming LV for about 7 years and switched from LV 6.1 to 7.1 about four months ago. I know NI engineers have put thousands of hours developing and testing LV 7.1, but honestly I find myself wishing I had never upgraded from using LV 6.1. (To whomever thought "hide trailing zeros" should be the default for floating point controls...what were you thinking?!)
I know each new version of LabView causes old-timers like me to grouse that things were better back in the days when we etched our block diagrams on stone tablets, etc., and honestly I'm not going to go back. I am committed to LabView 7.1. I just wish it were not so slow on my big projects!
Attachments:
LV_Speed_Test.vi 22 KBHi,
I can confirm this behavior. Setting the execution system to "user
interface" helps a bit, but there is still a big difference.
I get a feeling it has something to do with window messages, perhaps
WM_PAINT or something, that is handled differently if a VI is not
frontmost... But what do I know...
Don't know if it should be called a bug, but it sure is something that could
be optimized.
Regards,
Wiebe.
"Rob Calhoun" wrote in message
news:[email protected]...
> I'm posting this issue to the forums prior to submitting a bug report
> to ensure that the problems I'm having are reproducible. To reproduce
> this bug, you're going to have to be an advanced user with a large
> project (hundreds to thousands of VIs) as the performance problem is
> related to the number of VIs loaded.
>
> The issue is the increasingly poor performance of the LabVIEW 7.1
> Development Environment as the number of VIs in memory increases. The
> actions affected include switching between front panel and diagram,
> saving a VI, copy and paste, clicking a menu, and the mysterious time
> spent (compiling? editing the runtime menu? changing the toolbar
> state?) between pressing the run button and when the code actually
> starts executing. Scrolling and, interestingly, copying via a
> control-drag are not affected. Running time of entirely on-diagram
> code does not seem to be affected.
>
> These problems are quite severe and significantly decrease my
> productivity as a programmer. Since they are development environment
> UI issues, it's been difficult for me to find a good example VI; the
> best I can do is the attached "LV Speed Test.vi". It doesn't test the
> issues that affect me most, but it seems to suffer from the same
> problem.
>
> This simple VI just shows and hides the menu bar 100 times in a tight
> for loop. When it is the only VI loaded, it executes in about 350 msec
> on my machine. (2.4 GHz P-IV/640 MB RAM/Win2k). However, when I load a
> single project-encompassing VI (let's call it the "giant") that
> references a total of about 900 user and VI-lib subVIs, the test
> routine takes almost a minute and half to run...about 240 times
> slower! I've tried this on my laptop with similar results.
>
> The problem appears to be related to the *number* of VIs loaded and
> not the memory utilization. For example, if I close the "giant", and
> create a new VI ("memhog") that does nothing but initialize a length
> 20,000,000 array of doubles and stores it in an uninitialized shift
> register, LabView's overall memory usage (as shown in the task
> manager) jumps enormously, but LV Speed Test executes in about 450
> msec...only slightly slower than with a fresh copy of Labview.
>
> The problem seems to be related to excessive context switching. The
> Windows task manager shows over a thirteen hundred page faults occur
> when "LV Speed Test" is run with the "giant" in the background, versus
> zero or none when run by itself or when "memhog" has used up 160+MB of
> space.
>
> The problem only seems to affect the frontmost window. (Unfortunately,
> that's where we LV programmers spend all of our time!) If you start
> "LV Speed Test" and then put "giant" in the foreground "LV Speed Test"
> runs much faster. In fact, if you use the VI server to put the "giant"
> VI in the foreground programmatically at the start of "LV Speed Test",
> execution time drops back to 450 msec, and there are no page faults!
>
> These results show the issue is not related to video drivers or the
> Windows virtual memory system. My suspicion is that there is a faulty
> routine in LV 7.1 that is traversing the entire VI hierarchy every
> time certain events are thrown in the foreground window. It could be
> due to a problem with the Windows event tracking system, but this
> seems less likely.
>
> I have been programming LV for about 7 years and switched from LV 6.1
> to 7.1 about four months ago. I know NI engineers have put thousands
> of hours developing and testing LV 7.1, but honestly I find myself
> wishing I had never upgraded from using LV 6.1. (To whomever thought
> "hide trailing zeros" should be the default for floating point
> controls...what were you thinking?!)
>
> I know each new version of LabView causes old-timers like me to grouse
> that things were better back in the days when we etched our block
> diagrams on stone tablets, etc., and honestly I'm not going to go
> back. I am committed to LabView 7.1. I just wish it were not so slow
> on my big projects! -
Portal KM BI Integration - Serious Performance Issue
Hi guys,
we've implemented BI KM Integration in our portal environment.
This means that we can now navigate to :
/irj/servlet/prt/portal/prtroot/com.sap.km.cm.navigation/bw_metadata/activeVersion/Query/
Well, from a functional perspective this BI-KM integration is fine. The problem is performance-wise.
Our system is a 64-bit AIX DB2 and our JVM has been configured with the following settings:
-2560 max heap size
-Xmx2560m
-Xms2560m
-Xmn1000m
When the portal restarts, as KM comes up first, performance is fine but after half an hour it deteriorates until it comes to a crawl and a restart is needed. There are only a couple of guys on the system doing little activity and the back-end performs quite okay.
I think the problem is more JVM related (GC cycles) and from the NetWeaver Administrator I haven't been able to grab much info (also it's very very slow)....
Any ideas?Marco,
Have you had a look at these yet
u2022 710146 How to Change J2EE Engine JVM Settings
u2022 723909 Java VM Settings for J2EE 6.40/7.0
We have had a similar issue, for one of the clients who was running on nw2004s sp12 and upgrading to sp17 resolved all memory related issues.
Cheers!
Sandeep Tudumu -
Performance issue and indexing doesn't help
I created a view the SQL is basically simple but I need to group data based on a value returned from a function. I think this is slowing the performance. I first added a regular index on this, then added a function based index but neither helps. I get the data I need, but it takes too long. I hope someone can give me some ideas about how to optimize the performance of my SQL.
The base table has 1318408 rows. I need to select only a few columns and group and count the rows based on a date value in one of the columns. However the date in the table contains only an end of week value and I need to report based on quarters. The report needs both a date value and a text value for the quarter. So I created two functions that accept a date value and return a date value for the quarter start date and a text value for the quarter the date falls within respectively; my SQL is like this:
select
GLC_DATE2CAL_QRT_STARTDATE_FN(s.work_week_end_date) cyquarter_start_date,
GLC_DATE2CAL_QRTYR_FN(s.work_week_end_date) cyquarter_text,
s.ethnicity ethnicity_code,
et.description ethnicity_desc,
count( unique employee_id ) number_employees
from cpr_employees_snapshot s, ct_vendor_ethnicities et
and trim(s.ethnicity) = et.ethnicity_id
group by GLC_DATE2CAL_QRT_STARTDATE_FN(s.work_week_end_date), GLC_DATE2CAL_QRTYR_FN(s.work_week_end_date), s.ethnicity, et.description
this takes about 1 1/2 minutes to retrieve the data
when I do not use the functions and run this SQL:
select
s.work_week_end_date,
s.ethnicity ethnicity_code,
et.description ethnicity_desc,
count( unique employee_id ) number_employees
from cpr_employees_snapshot s, ct_vendor_ethnicities et
and trim(s.ethnicity) = et.ethnicity_id
group by s.work_week_end_date, s.ethnicity, et.description
it takes 7 seconds.Well I was successful in writing a case statement that works as a select and it reduces the retrieval time to 5 seconds, the problem now is that when I create a view with it the view is created but with compilation errors; if the select work without errors I don;t know why that is happening. Here is the create view SQL:
CREATE OR REPLACE FORCE VIEW GLC_WORKER_ETHNICITY_VW
cyquarter_start_date,
cyquarter_text,
cyquarter_end_date,
ethnicity_code,
ethnicity_desc,
number_employees
AS
select
case to_number(to_char(s.work_week_end_date, 'mm'))
when 1 then to_date('1/1/' || to_char(s.work_week_end_date, 'yyyy'),'mm/dd/yyyy')
when 2 then to_date('1/1/' || to_char(s.work_week_end_date, 'yyyy'),'mm/dd/yyyy')
when 3 then to_date('1/1/' || to_char(s.work_week_end_date, 'yyyy'),'mm/dd/yyyy')
when 4 then to_date('4/1/' || to_char(s.work_week_end_date, 'yyyy'),'mm/dd/yyyy')
when 5 then to_date('4/1/' || to_char(s.work_week_end_date, 'yyyy'),'mm/dd/yyyy')
when 6 then to_date('4/1/' || to_char(s.work_week_end_date, 'yyyy'),'mm/dd/yyyy')
when 7 then to_date('7/1/' || to_char(s.work_week_end_date, 'yyyy'),'mm/dd/yyyy')
when 8 then to_date('7/1/' || to_char(s.work_week_end_date, 'yyyy'),'mm/dd/yyyy')
when 9 then to_date('7/1/' || to_char(s.work_week_end_date, 'yyyy'),'mm/dd/yyyy')
when 10 then to_date('10/1/' || to_char(s.work_week_end_date, 'yyyy'),'mm/dd/yyyy')
when 11 then to_date('10/1/' || to_char(s.work_week_end_date, 'yyyy'),'mm/dd/yyyy')
when 12 then to_date('10/1/' || to_char(s.work_week_end_date, 'yyyy'),'mm/dd/yyyy')
end cyquarter_start_date,
'Q' || to_char(s.work_week_end_date, 'Q') || ' CY ' || to_char(s.work_week_end_date, 'yyyy') cyquarter_text,
s.ethnicity ethnicity_code,
et.description ethnicity_desc,
count( unique employee_id ) number_employees
from cpr_employees_snapshot s, ct_vendor_ethnicities et
where package_id = 727260
and trim(s.ethnicity) = et.ethnicity_id
group by s.work_week_end_date, s.ethnicity, et.description -
Huge Performance issue and RSRT
Hi BW Gurus,
We are using BCS cube for our consolidation queries and reports . There is a huge prformance problem.
I need to know that wht should be the appropriate size of the Global cache as compared to Local Cache. My global cache size is 100 MB and Global Cache size is 200 MB.
Also when I go to RSRT properties
Read Mode is H: Query to read when you navigate or expand hierarchy .
Cache Mode is : 4 persistent cache across each application server
persistence mode : 3 transparent table (BLOB).
Do I have to change these settings ....please give your suggestions
will appreciated with lot of points
ThanksHi Folks,..
Could you'll please tell me where exactly we put the break point I will paste my code. I did Run SE30 and the list cube extraction simaltaneoulsy and gave me a message error generating the test frame
tatics:
FUNCTION RSSEM_CONSOLIDATION_INFOPROV3.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(I_INFOPROV) TYPE RSINFOPROV
*" REFERENCE(I_KEYDATE) TYPE RSDRC_SRDATE
*" REFERENCE(I_TH_SFC) TYPE RSDD_TH_SFC
*" REFERENCE(I_TH_SFK) TYPE RSDD_TH_SFK
*" REFERENCE(I_TSX_SELDR) TYPE RSDD_TSX_SELDR
*" REFERENCE(I_FIRST_CALL) TYPE RS_BOOL
*" REFERENCE(I_PACKAGESIZE) TYPE I
*" EXPORTING
*" REFERENCE(E_T_DATA) TYPE STANDARD TABLE
*" REFERENCE(E_END_OF_DATA) TYPE RS_BOOL
*" REFERENCE(E_T_MSG) TYPE RS_T_MSG
*" EXCEPTIONS
*" ERROR_IN_BCS
statics:
UT begin:
this flag is switched in order to record data returned by the current query in UT
it can only be switched on/off in debug mode.
s_record_mode type rs_bool,
s_qry_memo type char256, " at the moment, for query name
package No, UUID, for unit testing
s_packageno type i,
s_guid type guid_22,
UT end.
s_first_call like i_first_call,
s_destination type rfcdest,
s_basiccube type rsinfoprov,
s_dest_back type rfcdest,
s_report type programm,
s_bw_local type rs_bool,
sr_data type ref to data,
sr_data_p type ref to data,
st_sfc type t_sfc,
st_sfk type t_sfk,
st_range type t_seqnr_range,
st_hienode type t_seqnr_hienode,
st_hienodename type t_seqnr_hienodename,
st_seltype type t_seqnr_seltype,
st_datadescr type T_DATADESCR,
s_end_of_data type rs_bool
data:
l_ucr_data_read_3 type funcname value 'UCR_DATA_READ_3',
l_packagesize like i_packagesize,
lt_message type t_message,
ls_message like line of e_t_msg,
l_xstring type xstring,
l_nr type i.
field-symbols:
<ls_message> type s_message,
<lt_data> type standard table,
<ls_data> type any,"nos100804
<lt_data_p> type hashed table."nos100804
clear: e_t_data, e_end_of_data, e_t_msg.
react on packagesize -1
if i_packagesize le 0. "nos050705
l_packagesize = rssem_cs_integer-max.
else.
l_packagesize = i_packagesize.
endif.
if i_first_call = rs_c_true.
s_first_call = rs_c_true.
clear s_end_of_data.
begin "nos100804
data:
lo_structdescr type ref to cl_abap_structdescr
,lo_tabledescr type ref to cl_abap_tabledescr
,lo_typedescr type ref to cl_abap_typedescr
data:
lt_key type table of abap_compname.
field-symbols <ls_component> type abap_compdescr.
create data sr_data_p like line of e_t_data.
assign sr_data_p->* to <ls_data>.
CALL METHOD CL_ABAP_STRUCTDESCR=>DESCRIBE_BY_DATA
EXPORTING
P_DATA = <ls_data>
RECEIVING
P_DESCR_REF = lo_typedescr.
lo_structdescr ?= lo_typedescr.
collect all key components to lt_key
loop at lo_structdescr->components assigning <ls_component>.
insert <ls_component>-name into table lt_key.
if <ls_component>-name = '&KEYEND'.
exit.
endif.
endloop.
data ls_sfk like line of i_th_sfk.
data l_key type abap_compname.
loop at i_th_sfk into ls_sfk.
l_key = ls_sfk-kyfnm.
if l_key is not initial.
delete table lt_key from l_key.
endif.
l_key = ls_sfk-value_returnnm.
if l_key is not initial.
delete table lt_key from l_key.
endif.
endloop.
create data sr_data_p like hashed table of <ls_data>
with unique key (lt_key).
create data sr_data_p like e_t_data.
create data sr_data like e_t_data.
end "nos100804
perform determine_destinations using i_infoprov
changing s_destination
s_dest_back
s_report
s_basiccube.
perform is_bw_local changing s_bw_local.
***--> convert the selection, enhance non-Sid-values.
--> Handle fiscper7
data:
lt_SFC TYPE RSDRI_TH_SFC
,lt_sfk TYPE RSDRI_TH_SFK
,lt_range TYPE RSDRI_T_RANGE
,lt_RANGETAB TYPE RSDRI_TX_RANGETAB
,lt_HIER TYPE RSDRI_TSX_HIER
,lt_adj_hier type t_sfc "nos290704
statics: so_convert type ref to lcl_sid_no_sid
, sx_seldr_fp34 type xstring
, s_fieldname_fp7 type RSALIAS
, st_sfc_fp34 TYPE RSDD_TH_SFC
create object so_convert type lcl_sid_no_sid
exporting i_infoprov = i_infoprov.
Transform SIDs...
perform convert_importing_parameter
using i_th_sfc
i_th_sfk
i_tsx_seldr
so_convert
e_t_data
changing lt_sfc
lt_sfk
lt_range
lt_rangetab
lt_hier
sx_seldr_fp34
"Complete SELDR as XSTRING
st_sfc_fp34
"SFC of a selection with
"FISCPER3/FISCYEAR
s_fieldname_fp7
"Name of Field for 0FISCPER
"(if requested)
This is the old routine, but ST_HIENDODE and ST_HIENODENAME can
be neglected, since they are not used at all.
perform prepare_selections
using lt_sfc
lt_sfk
lt_range
lt_rangetab
lt_hier
changing st_sfc
st_sfk
st_range
st_hienode
st_hienodename
st_seltype.
endif.
assign sr_data->* to <lt_data>.
assign sr_data_p->* to <lt_data_p>.
describe table <lt_data_p> lines l_nr.
while l_nr < l_packagesize and s_end_of_data is initial.
if s_dest_back is initial and s_bw_local = rs_c_true.
Local call
call function l_UCR_DATA_READ_3
EXPORTING
IT_SELTYPE = sT_SELTYPE
IT_HIENODE = sT_HIENODE "not used
IT_HIENODENAME = sT_HIENODENAME "not used
IT_RANGE = sT_RANGE
I_PACKAGESIZE = i_packagesize
I_KEYDATE = i_Keydate
IT_SFC = sT_SFC
IT_SFK = sT_SFK
i_infoprov = i_infoprov
i_rfcdest = s_destination
ix_seldr = sx_seldr_fp34
it_bw_sfc = st_sfc_fp34
it_bw_sfk = i_th_sfk
i_fieldname_fp7 = s_fieldname_fp7
IMPORTING
ET_DATA = <lT_DATA>
E_END_OF_DATA = s_END_OF_DATA
ET_MESSAGE = lT_MESSAGE
et_adj_hier = lt_adj_hier "nos290704
CHANGING
c_first_call = s_first_call.
elseif s_dest_back is initial and s_bw_local = rs_c_false.
!!! Error !!! No SEM-BCS destination registered for infoprovider!
if 1 = 2.
message e151(rssem) with i_infoprov.
endif.
ls_message-msgty = 'E'.
ls_message-msgid = 'RSSEM'.
ls_message-msgno = '151'.
ls_message-msgv1 = i_infoprov.
insert ls_message into table e_t_msg.
else.
remote call to SEM-BCS
** Call UCR_DATA_READ_3 ...
if s_first_call is not initial.
get the datadescription to create the requested return-structure
in the RFC-System.
perform get_datadescr
using <lt_data>
changing st_datadescr
endif.
call function 'UCR_DATA_READ_4'
destination s_dest_back
exporting i_infoprov = i_infoprov
i_rfcdest = s_destination
i_first_call = s_first_call
i_packagesize = i_packagesize
i_keydate = i_keydate
ix_seldr = sx_seldr_fp34
it_bw_sfc = st_sfc_fp34
it_bw_sfk = i_th_sfk
it_datadescr = st_datadescr
i_fieldname_fp7 = s_fieldname_fp7
importing c_first_call = s_first_call
e_end_of_data = s_end_of_data
e_xstring = l_xstring
tables it_seltype = st_seltype
it_range = st_range
it_hienode = st_hienode "not used
it_hienodename = st_hienodename "not used
it_sfc = st_sfc
it_sfk = st_sfk
et_message = lt_message
et_adj_hier = lt_adj_hier. "nos290704.
clear <lt_data>.
if lt_message is initial.
call function 'RSSEM_UCR_DATA_UNWRAP'
EXPORTING
i_xstring = l_xstring
CHANGING
ct_data = <lt_data>.
endif.
endif.
convert the returned data (SID & Hierarchy).
call method so_convert->convert_nosid2sid
exporting it_adj_hier = lt_adj_hier[] "nos290704
CHANGING
ct_data = <lt_data>.
e_t_data = <lt_data>.
Begin "nos100804
data l_collect type sy-subrc.
l_collect = 1.
if <lt_data_p> is initial and
<lt_data> is not initial.
call function 'ABL_TABLE_HASH_STATE'
exporting
itab = <lt_data>
IMPORTING
HASH_RC = l_collect "returns 0 if hash key exist.
endif.
if l_collect is initial.
<lt_data_p> = <lt_data>.
else.
loop at <lt_data> assigning <ls_data>.
collect <ls_data> into <lt_data_p>.
endloop.
endif.
append lines of <lt_data> to <lt_data_p>.
End "nos100804
messages
loop at lt_message assigning <ls_message>.
move-corresponding <ls_message> to ls_message.
insert ls_message into table e_t_msg.
endloop.
if e_t_msg is not initial.
raise error_in_bcs.
endif.
describe table <lt_data_p> lines l_nr.
endwhile.
if l_nr <= l_packagesize.
e_t_data = <lt_data_p>.
clear <lt_data_p>.
e_end_of_data = s_end_of_data.
else.
Begin "nos100804
<lt_data> = <lt_data_p>.
append lines of <lt_data> to l_packagesize to e_t_data.
data l_from type i.
l_from = l_packagesize + 1.
clear <lt_data_p>.
insert lines of <lt_data> from l_from into table <lt_data_p>.
clear <lt_data>.
End "nos100804
endif.
UT begin: start to record data
if s_record_mode = rs_c_true.
if i_first_call = rs_c_true.
clear: s_guid, s_packageno.
perform prepare_unit_test_rec_param
using
e_end_of_data
i_infoprov
i_keydate
i_th_sfc
i_th_sfk
i_tsx_seldr
i_packagesize
lt_key
e_t_data
s_qry_memo
changing
s_guid.
endif.
add 1 to s_packageno.
perform prepare_unit_test_rec_data
using
s_guid
s_packageno
e_t_data
i_infoprov
e_end_of_data.
endif. "s_record_mode = rs_c_true
UT end.
if not e_end_of_data is initial.
clean-up
clear: s_first_call, s_destination, s_report, s_bw_local,
st_sfc, st_sfk, st_range, st_hienode, s_basiccube,
st_hienodename, st_seltype, s_dest_back, sr_data,
so_convert , s_end_of_data, sr_data_p."nos100804
free: <lt_data> , <lt_data_p>.
endif.
endfunction.
It stores query parameters into cluster table
form prepare_unit_test_rec_param using i_end_of_data type rs_bool
i_infoprov type rsinfoprov
i_keydate type rrsrdate
i_th_sfc type RSDD_TH_SFC
i_th_sfk type RSDD_TH_SFk
i_tsx_seldr type rsdd_tsx_seldr
i_packagesize type i
it_key type standard table
it_retdata type standard table
i_s_memo type char256
changing c_guid type guid_22.
data:
ls_key type g_rssem_typ_key,
ls_cluster type rssem_rfcpack,
l_timestamp type timestampl.
get GUID, ret component type
call function 'GUID_CREATE'
importing
ev_guid_22 = c_guid.
ls_key-idxrid = c_guid.
clear ls_key-packno.
cluster record
get time stamp field l_timestamp.
ls_cluster-infoprov = i_infoprov.
ls_cluster-end_of_data = i_end_of_data.
ls_cluster-system_time = l_timestamp.
ls_cluster-username = sy-uname.
return data type
data:
lo_tabtype type ref to cl_abap_tabledescr,
lo_linetype type ref to cl_abap_structdescr,
lt_datadescr type t_datadescr,
ls_datadescr like line of lt_datadescr,
lt_retcomptab type abap_compdescr_tab,
ls_retcomptab like line of lt_retcomptab,
lt_rangetab type t_seqnr_range.
lo_tabtype ?= cl_abap_typedescr=>describe_by_data( it_retdata ).
lo_linetype ?= lo_tabtype->get_table_line_type( ).
lt_retcomptab = lo_linetype->components.
call the sub procedure to use external format of C, instead of interal format (unicode).
otherwise, when create data type from internal format, it won't be the same length as stored in cluster.
PERFORM get_datadescr USING it_retdata
CHANGING lt_datadescr.
loop at lt_datadescr into ls_datadescr.
move-corresponding ls_datadescr to ls_retcomptab.
append ls_retcomptab to lt_retcomptab.
endloop.
range, excluding
record param
export p_infoprov from i_infoprov
p_keydate from i_keydate
p_th_sfc from i_th_sfc
p_th_sfk from i_th_sfk
p_txs_seldr from i_tsx_seldr
p_packagesize from i_packagesize
p_t_retcomptab from lt_retcomptab
p_t_key from it_key
p_memo from i_s_memo
to database rssem_rfcpack(ut)
from ls_cluster
client sy-mandt
id ls_key.
endform.
It stores return data to cluster table
form prepare_unit_test_rec_data using
i_guid type guid_22
i_packageno type i
it_retdata type standard table
i_infoprov type rsinfoprov
i_end_of_data type rs_bool.
data:
l_lines type i,
ls_key type g_rssem_typ_key,
ls_cluster type rssem_rfcpack,
l_timestamp type timestampl.
ls_key-idxrid = i_guid.
ls_key-packno = i_packageno.
describe table it_retdata lines l_lines.
if l_lines = 0.
clear it_retdata.
endif.
cluster record
get time stamp field l_timestamp.
ls_cluster-infoprov = i_infoprov.
ls_cluster-end_of_data = i_end_of_data.
ls_cluster-system_time = l_timestamp.
ls_cluster-username = sy-uname.
export p_t_retdata from it_retdata
to database rssem_rfcpack(ut)
from ls_cluster
client sy-mandt
id ls_key.
endform.
form convert_importing_parameter
using i_th_sfc TYPE RSDD_TH_SFC
i_th_sfk TYPE RSDD_TH_SFK
i_tsx_seldr TYPE RSDD_TSX_SELDR
io_convert type ref to lcl_sid_no_sid
i_t_data type any table
changing et_sfc TYPE RSDRI_TH_SFC
et_sfk TYPE RSDRI_TH_SFK
et_range TYPE RSDRI_T_RANGE
et_rangetab TYPE RSDRI_TX_RANGETAB
et_hier TYPE RSDRI_TSX_HIER
ex_seldr type xstring
e_th_sfc TYPE RSDD_TH_SFC
e_fieldname_fp7 type rsalias
data lt_seldr TYPE RSDD_TSX_SELDR.
data ls_th_sfc type RRSFC01.
0) rename 0BCSREQUID > 0REQUID
data l_tsx_seldr like i_tsx_seldr.
data l_th_sfc like i_th_sfc.
data l_th_sfc2 like i_th_sfc. "nos070605
l_tsx_seldr = i_tsx_seldr.
l_th_sfc = i_th_sfc.
data ls_sfc_requid type RRSFC01.
data ls_seldr_requid type RSDD_SX_SELDR.
ls_sfc_requid-chanm = '0BCS_REQUID'.
read table l_th_sfc from ls_sfc_requid into ls_sfc_requid.
if sy-subrc = 0.
delete table l_th_sfc from ls_sfc_requid.
ls_sfc_requid-chanm = '0REQUID'.
insert ls_sfc_requid into table l_th_sfc.
endif.
ls_seldr_requid-chanm = '0BCS_REQUID'.
read table l_tsx_seldr from ls_seldr_requid into ls_seldr_requid.
if sy-subrc = 0.
delete table l_tsx_seldr from ls_seldr_requid.
ls_seldr_requid-chanm = '0REQUID'.
field-symbols: <ls_range> like line of ls_seldr_requid-range-range.
loop at ls_seldr_requid-range-range assigning <ls_range>.
check <ls_range>-keyfl is not initial. "jhn190106
if <ls_range>-sidlow is initial and <ls_range>-low is not initial.
<ls_range>-sidlow = <ls_range>-low.
clear <ls_range>-low.
endif.
if <ls_range>-sidhigh is initial and <ls_range>-high is not initial.
<ls_range>-sidhigh = <ls_range>-high.
clear <ls_range>-high.
endif.
clear <ls_range>-keyfl. "jhn190106
endloop.
insert ls_seldr_requid into table l_tsx_seldr.
endif.
*1) Convert SIDs..., so that all parameter look like the old ones.
call method io_convert->convert_sid2nosid
EXPORTING
it_sfc = l_th_sfc
it_sfk = i_th_sfk
it_seldr = l_tsx_seldr
it_data = i_t_data
IMPORTING
et_sfc = et_sfc
et_sfk = et_sfk
et_range = et_range
et_rangetab = et_rangetab
e_th_sfc = l_th_sfc2 "nos070605
Ignore the old hierachy information:
clear et_hier.
delete et_range where chanm = '0REQUID'.
delete table et_sfc with table key chanm = '0REQUID'.
*2) Eliminate FISCPER7, from new strucutres:
lt_seldr = i_tsx_seldr. "nos131004
e_th_sfc = l_th_sfc.
the fiscper7 can be deleted completly from the SID-selection, because
it is also treated within et_range...
clear e_fieldname_fp7.
delete lt_seldr where chanm = cs_iobj_time-fiscper7."nos131004
Begin "nos131004
Ensure that there is no gap in the seldr.
data:
ls_seldr like line of lt_seldr
,l_fems_act like ls_seldr-fems
,l_fems_new like ls_seldr-fems
loop at l_tsx_seldr into ls_seldr
where chanm ne cs_iobj_time-fiscper7.
if ls_seldr-fems ne l_fems_act.
l_fems_act = ls_seldr-fems.
add 1 to l_fems_new.
endif.
ls_seldr-fems = l_fems_new.
insert ls_seldr into table lt_seldr.
endloop.
end "nos131004
e_th_sfc = l_th_sfc2. "nos070605
Is fiscper7 in the query? (BCS requires allways two fields)
read table e_th_sfc with key chanm = cs_iobj_time-fiscper7
into ls_th_sfc.
if sy-subrc = 0.
==> YES
--> change the SFC, so that FISCPER3 and FISCYEAR is requested.
The table ET_RANGE does contain also the selection for
FISCPER3/FISCYEAR
But since also E_FIELDNAME_FP7 is transferred to BCS, the
transformation of the data, back to FISCPER7 is done on BCS-side.
e_fieldname_fp7 = ls_th_sfc-KEYRETURNNM.
"begin nos17060
if e_fieldname_fp7 is initial.
e_fieldname_fp7 = ls_th_sfc-sidRETURNNM.
translate e_fieldname_fp7 using 'SK'.
endif.
"end nos17060
delete table e_th_sfc from ls_th_sfc.
ls_th_sfc-chanm = cs_iobj_time-fiscper3.
ls_th_sfc-keyreturnnm = ls_th_sfc-chanm.
insert ls_th_sfc into table e_th_sfc.
ls_th_sfc-chanm = cs_iobj_time-fiscyear.
ls_th_sfc-keyreturnnm = ls_th_sfc-chanm.
insert ls_th_sfc into table e_th_sfc.
endif.
Store the SELDR in a XSTRING and unpack it just before selecting data
in BW. It is not interpreted in BCS!
export t_seldr = lt_seldr
Store also the SFC, because the BW-Systems migth be differrnt rel./SP.
t_bw_sfc = e_th_sfc to data buffer ex_seldr compression on.
endform. "convert_importing_parameter
*& Form get_datadescr
text
-->IT_DATA text
-->ET_DATADESCtext
form get_datadescr
using it_data type any table
changing et_datadescr type t_datadescr
data: lr_data type ref to data
, lo_descr TYPE REF TO CL_ABAP_TYPEDESCR
, lo_elemdescr TYPE REF TO CL_ABAP_elemDESCR
, lo_structdescr TYPE REF TO CL_ABAP_structDESCR
, lt_components type abap_component_tab
, ls_components type abap_componentdescr
, ls_datadescr type s_datadescr
field-symbols: <ls_data> type any
, <ls_components> type abap_compdescr
clear et_datadescr.
create data lr_data like line of it_data.
assign lr_data->* to <ls_data>.
CALL METHOD CL_ABAP_STRUCTDESCR=>DESCRIBE_BY_DATA
EXPORTING
P_DATA = <ls_data>
RECEIVING
P_DESCR_REF = lo_descr.
lo_structdescr ?= lo_descr.
CALL METHOD lo_structdescr->GET_COMPONENTS
RECEIVING
P_RESULT = lt_components.
loop at lo_structdescr->components assigning <ls_components>.
move-corresponding <ls_components> to ls_datadescr.
if ls_datadescr-type_kind = cl_abap_elemdescr=>typekind_char
or ls_datadescr-type_kind = cl_abap_elemdescr=>typekind_num
read table lt_components with key name = <ls_components>-name
into ls_components.
if sy-subrc = 0.
lo_elemdescr ?= ls_components-type.
ls_datadescr-length = lo_elemdescr->output_length.
endif.
endif.
append ls_datadescr to et_datadescr.
endloop.
endform. "get_datadescr
Try to give your inputs will appreciate that
thanks -
New system, just setting up. Trouble shot hardware and everything works fine, just can't get any sound on the browser and have no obvious volume control for Firefox. All other volumes are at full
Hey! well funny enough, After doing a Semi format (That cool function that WIN 8 has to refresh your PC) .. I could hear sounds,!!!! Yay super happy!! .... so I continued to download all my programs once again....and then today, I went to watch a movie trailler.... and I had no sound... again... but obviolusy once the Razer synapse installed, It must have something wrong with it and its not letting me hear stuff!! and I know this becasue I borrowed a headset, a Turtel Beach x12 and now I can hear stuff all the time!! YAY! .. Ive been switching between one and the other, and the Kraken dont work! Lol
Thanks everyone for reading and helping! :D -
Adobe AIR 3 Performance Issues and Code Signing Certificate Problem
I recently updated to Adobe AIR 3.0 SDK (and runtime) doing HTML/Javascript development using Dreamweaver CS5.5 in a Windows 7 Home Premium (64 bit).
The AIR app I'm developing runs well from within Dreamweaver. But when I create/package the AIR app and install it on my machine:
1. The app literally CRAWLS running it in my Windows 7 12G RAM machine (especially when I use the mouse to mouse over a 19-by-21 set of hyperlinks on a grid) --- IT IS THAT SLOOOOWWWW...
2. The app runs fine in my Mac OS X 10.6.8 with 4G RAM, also using the Adobe AIR 3 runtime.
About the Code Signing Certificate problem:
When I try to package the AIR app with ADT using AIR's temporary certificate feature, I get the error message "Could not generate timestamp: handshake alert: unrecognized_name".
I found some discussions on this problem in an Adobe AIR Google Groups forum, but no one has yet offered any resolution to the issue. Someone said Adobe is using the Geotrust timestamping service --- located at https://timestamp.geotrust.com/tsa --- but going to this page produces a "404 --- Page not found" error.
The Google Groups Adobe AIR page is here:
http://groups.google.com/group/air-tight/browse_thread/thread/17cd38d71a385587
Any ideas about these issues?
Thanks!
OscarI recently updated to Adobe AIR 3.0 SDK (and runtime) doing HTML/Javascript development using Dreamweaver CS5.5 in a Windows 7 Home Premium (64 bit).
The AIR app I'm developing runs well from within Dreamweaver. But when I create/package the AIR app and install it on my machine:
1. The app literally CRAWLS running it in my Windows 7 12G RAM machine (especially when I use the mouse to mouse over a 19-by-21 set of hyperlinks on a grid) --- IT IS THAT SLOOOOWWWW...
2. The app runs fine in my Mac OS X 10.6.8 with 4G RAM, also using the Adobe AIR 3 runtime.
About the Code Signing Certificate problem:
When I try to package the AIR app with ADT using AIR's temporary certificate feature, I get the error message "Could not generate timestamp: handshake alert: unrecognized_name".
I found some discussions on this problem in an Adobe AIR Google Groups forum, but no one has yet offered any resolution to the issue. Someone said Adobe is using the Geotrust timestamping service --- located at https://timestamp.geotrust.com/tsa --- but going to this page produces a "404 --- Page not found" error.
The Google Groups Adobe AIR page is here:
http://groups.google.com/group/air-tight/browse_thread/thread/17cd38d71a385587
Any ideas about these issues?
Thanks!
Oscar
Maybe you are looking for
-
Multiple touches on one itunes account
I have a Ipod touch and my husband wants to get one. I have a few questions. 1. Can both touches uses 1 itune account? 2. Can each touch select certain items to sync or is it all of the apps? 3. If each had a separate account can each snyc to the oth
-
What is the Model number for Unlock iPhone 5s?
What is the Model number for the Unlock version of the iPhone 5s Space Gray 32 GB ?
-
7.1.1 with NETBOOT and HomeDirectories...crashes on launch
We recently upgraded our office to 10.4.9 from 10.4.8 and itunes to 7.1.1 , however now, when launching itunes, the app bombs out and auto quits asking to report the problem to Apple. We have been running home dir and netboot for over 2 years and thi
-
Project Server 2010 Site Template Update
Hi, I have a Project Server 2010 environment in which there are several site templates created and there are about 500 projects. Now, I have the requirement of changing some templates (add a list, some fields in a existing Risks and Issues lists, etc
-
Hi, i have a question: Because of same Problems with replication, i had to apply again some replicated trailfiles. It worked fine, some duplicate have been written to the discardfile, but this has been the expected result. My Question: In such a case